Database Info

[Q] Need Help with CM10!

I've just make another recovery into MY cm10 ATRIX2 (ME865) by accident....
I know it's forbidden to do so
btw, my device is now hang in bootloop
only original recovery is able to use
However, using RSDLite did not recognise my phone
WHat can I do with it???

mj021108 said:
I've just make another recovery into MY cm10 ATRIX2 (ME865) by accident....
I know it's forbidden to do so
btw, my device is now hang in bootloop
only original recovery is able to use
However, using RSDLite did not recognise my phone
WHat can I do with it???
Click to expand...
Click to collapse
You have to put the phone in fastboot mode before trying to use RSD lite, to recover. If you do not know how to do that please look in the noob thread or search, as this has been covered a million times now.

jimbridgman said:
You have to put the phone in fastboot mode before trying to use RSD lite, to recover. If you do not know how to do that please look in the noob thread or search, as this has been covered a million times now.
Click to expand...
Click to collapse
I've tried so
however, RSDLite seems not able to recognise my device and failed to boot in

mj021108 said:
I've tried so
however, RSDLite seems not able to recognise my device and failed to boot in
Click to expand...
Click to collapse
You have tried what? We need a ton more information from you please. Be as specific as possible.
For instance did you get into fastboot mode?
Did windows try and install drivers for the phone in fastboot mode?
What version of firmware are you attempting to flash in RSD lite?
What version of RSD lite are you using?
Were you ever able to use RSD lite before?
Have you uninstalled the motorola drivers and reinstalled them?
Any other pertinent information will be helpful.

RSD Lite and the Moto G

I'm wondering if any of you have been able to successfully flash the Moto G with stock firmware using RSD Lite. I am able to have RSD Lite recognize the phone by entering fastboot and choosing the last option (BP tools). The phone then reboots into Android and then RSD LIte sees it. From there I try to flash the rom, and it reboots the phone back into fastboot mode but it doesn't do anything from there; it just hangs.
Do any of you know how to do this? If you could please help I would greatly appreciate it. Thanks.

Why not just use fastboot?
It's not that complicated

mystichobo said:
Why not just use fastboot?
It's not that complicated
Click to expand...
Click to collapse
Couldn't rsd lite un softbricked devices like flashing a kdz
sent from the kitty kat Atrix HD Maxx

[Q] invalid PIV signed system image error after flashing Global Moto G to EU Rom

Hi Guys
I need your help please, I've bought the global Moto G from amazon.com and I've tried to flash the UK and EU Roms but each time it gives me the same error message "invalid PIV signed system image" after the command "mfastboot flash system system.img_sparsechunk1"
the other commands gave no no error messages but the device wont boot and it stocked on the broken android logo ,
Please tell me what should I do guys, I would really appreciate your help

Abdo shniba said:
Hi Guys
I need your help please, I've bought the global Moto G from amazon.com and I've tried to flash the UK and EU Roms but each time it gives me the same error message "invalid PIV signed system image" after the command "mfastboot flash system system.img_sparsechunk1"
the other commands gave no no error messages but the device wont boot and it stocked on the broken android logo ,
Please tell me what should I do guys, I would really appreciate your help
Click to expand...
Click to collapse
Well UK stock ROM doesn't have 1 at its end it uses .0 .1 .2

robin0800 said:
Well UK stock ROM doesn't have 1 at its end it uses .0 .1 .2
Click to expand...
Click to collapse
I know, I tried renaming the files and renaming the commands, same thing happened, any advice to flash it correctly ?

Try download the rom again probably its corrupted, and try to place it in desktop folder before flash, not in very long rpute paths or in external drives with different filesystem. I had many problems hard to spot becaise managing files from windows accessing reiserfs drives.
Sent from my XT1032 using Tapatalk

unrafa said:
Try download the rom again probably its corrupted, and try to place it in desktop folder before flash, not in very long rpute paths or in external drives with different filesystem. I had many problems hard to spot becaise managing files from windows accessing reiserfs drives.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
I'll try the GPe Rom, and will let you know

570 9825548
I tried the GPe rom and the same thing happened only now it's stuck on the Google logo, please guys help me out, what should I do?
Update: I unlocked the bootloader and everything went fine, sorry guys, I thought it wasn't necessary

Abdo shniba said:
I tried the GPe rom and the same thing happened only now it's stuck on the Google logo, please guys help me out, what should I do?
Update: I unlocked the bootloader and everything went fine, sorry guys, I thought it wasn't necessary
Click to expand...
Click to collapse
did u get any solution?

I have Moto e XT1025 when I tried to install stock rom it says invalid piy signature and remote failure . My phone stuck on Moto logo and also when I tried to unlock my bootloader on Moto site it says your mobile is not qualified for unlock please help to getting out from this problem
ASAP

I am also getting same error Invalid PIV signed system image

i have the same problem, with my phone stock in fastboot mode and no option to flash any rom and my bootloader not qualify to unlock.

same problem here invalid PIV images please help

hola.
¿Lograron resolver el problema?

[Q] Boot Loop after touch screen change

Hi all,
I'm new on this forum, it's my first time here.
I have a problem with my son HTC ONE SV.
He has broken the touch screen, than I have find a complete replace touch screen in England for 45€, so I was happy because the assistence ask me 150 € and more for change the screen.
I have replace the Screen and I was very happy when I finish to assemble the phone and It's starts... but.... the Phone goes into a Boot Loop.
With volume down+ on button I can Enter into service menù and I have installa on my PC HTC driver, so when I attach the Phone to USB cabel from Fastboot I see "fastboot USB" on screen.
I have try to to a Factory Reset but nothig happen, the phone at every start goes into a Boot Loop.
I Have try to change back the original Screen (broken) and it's Boot loop also with the original screen (so I think the new screen is ok)
So the Phone is not Rooted and it's into original conditions with original Firmware branded TIM (Italy operator).
I have try to find some information about the possibility to flash the original Firmware or if possible a cutom Firmware, but I have found only information about Stok firmware or similar, and for this option I must have the Phone Rooted, S-OFF, unloked.
But my phone was not rooted or in s-off mode or unloked, or set into Debugmode from Settings (now is in boot loop and I can't acces to the settings menù).
Can someone help me with this problem?
I need only to do a factory reset with original firmware, or , if possible in this condition, install a custom firmware.
There is the possibility to flash original firmware (I have 2 HTC ONE SV, other 2 son where I could extract the original firmware if necessary)
Many thanx to all.
Massimo from Italy

Never had to do such things. But the only thing you can do is, unlock your device with htcdev.com, use custom (TWRP) recovery and flash back a backup or a stock rom.
Is your phone k2u or k2ul?

many thanx
old.splatterhand said:
Never had to do such things. But the only thing you can do is, unlock your device with htcdev.com, use custom (TWRP) recovery and flash back a backup or a stock rom.
Is your phone k2u or k2ul?
Click to expand...
Click to collapse
Many thanks,
what is k2u or k2ul?..... k2u is not LTE version and k2ul is LTE version
I have Unlook the bootloader, now is UNLOCKED.
For TWRP I have find this http://forum.xda-developers.com/showthread.php?t=2280241
So I have flash the recovery:
Recovery_TWRP_2.6.3.2_K2_UL.img Older version
Only for k2u & k2ul!
But After if I press recovery the phone boot and show a description:
This build is for developed purposes only
Do not distribuite outside of HTC
withot HTC's writeren permission.
Failture to comply may lead to legal action.
In attach 2 immage

That screen is normal after unlocking.
So you can't boot into recovery?
How did you flash?

old.splatterhand said:
That screen is normal after unlocking.
So you can't boot into recovery?
How did you flash?
Click to expand...
Click to collapse
I coonect the phone to usb and from Fastboot I flash with:
fastboot flash recovery recovery.img
Where recoveryimage.img is Recovery_TWRP_2.6.3.2_K2_UL.img
After the flash I back to main menù and run recovery but after the splash screen with the message the Phone enter into loop reboot

Did you rename Recovery_TWRP_2.6.3.2_K2_UL.img to recovery.img?
Whats written in your cmd window?

old.splatterhand said:
Did you rename Recovery_TWRP_2.6.3.2_K2_UL.img to recovery.img?
Whats written in your cmd window?
Click to expand...
Click to collapse
Yes I rename Recovery_TWRP_2.6.3.2_K2_UL.img to recovery.img and put it into the same folder with fastboot.exe
In CMD window i wrote
fastboot flash recovery recovery.img

Ok, but do you see in cmd window, that recovery is flashed successfully?

old.splatterhand said:
Ok, but do you see in cmd window, that recovery is flashed successfully?
Click to expand...
Click to collapse
Yes the message show me succefully flash ok

Then you should be able to boot into recovery.
Please give the 2.7 recovery a try.

old.splatterhand said:
Then you should be able to boot into recovery.
Please give the 2.7 recovery a try.
Click to expand...
Click to collapse
Nothing..... always loop reboot when lunch recovery.
I have also try to do:
fastboot reboot-bootloader
rhan
fastboot erase cache
then
lunch recovery but the phone show the HTC messagge and thena loop reboot

I'm running out of ideas
It seems, something else/more is broken on your phone, because as you are unlocked and flashing shows fine, you should be able to enter.
Last try from my side, hopefully this works: http://d-h.st/NXX

old.splatterhand said:
I'm running out of ideas
It seems, something else/more is broken on your phone, because as you are unlocked and flashing shows fine, you should be able to enter.
Last try from my side, hopefully this works: http://d-h.st/NXX
Click to expand...
Click to collapse
nothig, always the same.
thanx for your help.
I hope someone can suggest me a solution.
If I'll resolve the problem I'll let you know.
or as you suppose something is broken in my phone, because factory reset loopreboot like the Recovery
many thanx again.
bye
Massimo

polimarx said:
nothig, always the same.
thanx for your help.
I hope someone can suggest me a solution.
If I'll resolve the problem I'll let you know.
or as you suppose something is broken in my phone, because factory reset loopreboot like the Recovery
many thanx again.
bye
Massimo
Click to expand...
Click to collapse
Did you change the touchscreen only or the lcd along with the touchscreen as well? If you followed everything with how to flash recovery and firmware, maybe there is some mismatch with your screen assembly and the phone software. Some phones come with different revisions for the lcd screens. Maybe that is the problem. But I am not sure about One SV different LCD revs.
Before I was using galaxy wonder and it had three diffrent LCD revisions and one of them exhibited a bug with the Cyanogen OS where as the others did not.
I would take the phone to the shop where you got the touchscreen and ask them for help.
Sent from my HTC One SV using Tapatalk

Moto Maxx XT1250 Soft Brick

Hello please can anyone help me. I tried to take the soak update 6.0.1 for the Moto Maxx and my phone is stuck in a TWRP loop. I can get into fastboot but when i try to get into Recovery I see a message 'Updating Partion Details...done'. It restarts and keeps looping infinitely. In fastboot i have a driver error 'Fastboot Quark S'
Please what steps can i take. Thanks

kenennaoyeka said:
Hello please can anyone help me. I tried to take the soak update 6.0.1 for the Moto Maxx and my phone is stuck in a TWRP loop. I can get into fastboot but when i try to get into Recovery I see a message 'Updating Partion Details...done'. It restarts and keeps looping infinitely. In fastboot i have a driver error 'Fastboot Quark S'
Please what steps can i take. Thanks
Click to expand...
Click to collapse
I got it sorted out. Thanks

kenennaoyeka said:
I got it sorted out. Thanks
Click to expand...
Click to collapse
would you share how please ?