Related
The Acer Iconia Toolkit is supporting following devices at the moment:
B1-A71
B1-710
B1-A710
B1-711
B1-720
A1-810
A1-811
A3-A10
Liquid S1
Only use these methods if you are sure the device cannot be rooted using a custom recovery from the following thread:
http://forum.xda-developers.com/andr...ax-b1-t2875894
Intel based devices will not be supported ever by this toolkit! Only Mediatek chips are supported!
At the moment the following features are available:
Root from scratch (Unix only / recommended)
Root with prerooted Image (see Download links at the bottom)
Unroot
Swap External <-> Internal SD
Odex ROM
Pull system.img.gz off your device
Download Acer Iconia Toolkit Latest Version
Older Versions:
v0.9.0
v0.8.5
v0.8.4
v0.8.3
v0.8.2
Thank you goes to:
FireDiamond, bullbrand, pawitp, alba81, sodaFR, MatrixDJ96, ak6, min-dfreak, Gilly10, agentdeep, nick_1964, sampod
and the testers
Acer Iconia B1-A71:
Unlock Bootloader
CWM update, that removes bloat
thx to FireDiamond
Apply the "Invalid Partition Error" fix before rooting!!!
To avoid unfixable bootloop, first apply this patch from Acer.
Install the APK, start it, click on FixG1PMT (no feedback) and uninstall afterwards. Good luck!
If you're rooting with prerooted system.img.gz here are the Downloads. Pick the one, fitting to the firmware installed on your tablet, otherwise you will get into bootloop!
RV03RC05:
Acer Firmware Update [mirror] [mirror + md5]
RV04RC04:
[system.img.gz] [mirror]
RV05RC05:
Acer Firmware Update [mirror1] [mirror2] [mirror3] [mirror4 + md5] [mirror5 + md5]
[system.img.gz]
RV02RC12:
system.img.gz
Acer Iconia B1-710 / B1-A710:
Unlock Bootloader (thx to FireDiamond and abstrkt1337)
RV04RC01:
system.img.gz [mirror1] [mirror2]
Stock system Images for B1-710 RV04RC01
Hamza91: stock, rooted
RV04RC01_PA_CA:
Stock and Rooted system image
Acer Iconia B1-711:
RV01RC04_WW_GEN1:
system.img.gz
Acer Iconia B1-720:
RV03RC01_WW_GEN1:
system.img.gz (thx to Hayastan)
RV07RC01_WW_GEN1:
system.img.gz (thx to Hayastan)
Acer Iconia A1-810:
Acer Firmwares
Modified XPosed Installer
RV03RC08:
system.img.gz
RV18RC07_WW_GEN1:
update.zip (about 4MB)
system.img.gz with /system RW workaround (MD5 = 214db984aee42ef0c05d1cfa43d193c1) (needs extra config and SuperSU instead of Superuser) [torrent] (see this post also)
RV21RC02_WW_GEN1:
update.zip
system.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)
RV21RC03_TWN:
system.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)
RV27RC02_PA_CA:
stock system.img.gz (rename to system.img.gz first!)
system.img.gz (rename to system.img.gz first!)
RV27RC03_WW_GEN1:
system.img.gz
stock system.img.gz
update.zip
RV18RC10_PA_CA:
system.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)
RV26RC06_PA_CUS1:
system.img.gz
Stock Images: (Workaround to unroot: Put the system.img.gz of your version into system_image and choose root option in toolkit)
RV03RC08:
system.img.gz
RV18RC07:
system.img.gz ( MD5=550ECDB192F5668264B11B1070F4B932 )
How to root from scratch
Acer Iconia A1-811:
RV01RC11_WW_GEN1:
Acer Firmware Update
RV02RC20:
system.img.gz rooted and stock (including xposed) (thx to konsolen!!)
RV02RC22_TWN_GEN1:
system.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)
Unbrick:
Stock Firmware RV01RC11 (copy on SD and flash from recovery)
Acer Iconia A3-A10:
A3-A10_RV05RC01_PA_CA:
stock system image
Your device not listed above?
Help us getting your device to work with the toolkit.
See this post how you can help.
Common
B1-A71 / B1-710 / B1-A710: Install this after rooting: Superuser App on Google Play Store
A1-810 / A1-811 / B1-711: Install this after rooting: SuperSU App on Google Play Store
Verify your root: Root Checker on Play Store
FAQ
Q: I'm stuck inside a bootloop after rooting!!!11
A1: The system.img.gz you applied, wasn't suiting to the firmware version installed on your tablet. Download latest Acer firmware update ( !!! if available !!!), copy it on a micro sd card, plug it into your Iconia, go to recovery by holding Volume up and Power button while device is turned off. Then choose apply update from sd card.
A2: If you cannot apply any Acer firmware, because you always get a partition error while installing, you should do a reboot after you get the error. A user reported that this made her/his device boot into Android again, showing the new version in settings -> info. Good luck
A3: If your device is really bricked you could try bring it back to life. Here you find help: link1, link2, link3, link4 (many thanks to Gilly10, drmad and Hamza91)
A4 (B1-A71, B1-710, B1-711 only): Unbrick
A5: If the A1 - A4 didn't help. Send back the device to Acer. Tell them you tried to apply an update from sd card and ended up in this bootloop. Sending device back to Acer over UPS is free. Good luck!
Q: Successfully rooted, but still no root after rebooting!
A: Have you installed Superuser App from Google Play Store?
(B1-A71 only)Q: Cannot update, always getting ERROR: - Invalid partition setting; 17: fat 238e8000:888e8000; Instalation aborted.
A: Download "Invalid Partition Error" Patch.
(B1-A71 only)Q: I applied update from RV05RC05 to RV05RC06 but still it shows RV05RC05.
A: There is no RV05RC06. It is the RV05RC05. It got on Acers Download section with a RV05RC06 named zip file. But the content is 100% equal to RV05RC05.
Q: Toolkit fails or crashes for any reason and I don't know what to do.
A: Run it again with parameter -d, e.g.: toolkit.exe -d and post the entire output here.
Q: Root from scratch on Linux doesn't work because of Error message: 'No such file or directory bin/posix/64/adb'
A: sudo apt-get install ia32-libs libstdc++6 libgcc1 zlib1g libncurses5 libsdl1.2debian
Q: Can i flash a custom recovery?
A: No, because bootloader is locked. You would brick your tablet.
Q: Are there Custom ROMs?
A: No, see answer above.
Q: Is my data wiped during root?
A: No.
Q: Do i lose root after factory reset or wipe date?
A: No.
Q: I get an error in Engineer mode entering telnet command.
A: If Swiftkey is installed / enabled try settings Google AOSP Keyboard as default.
Q: How can I start telnet server manually?
A: Try this.
What you can do with root:
Apply Supercharger V6 by zeppelinrox and significally speed up your tablet! [My small How-To]
Install Adaway, an ad-blocker for webbrowsers and apps containing ads.
Install ROM Toolbox and customize boot screen and other funny things.
Install Titanium Backup to Backup, Freeze, Uninstall any App and more.
Install Datasync to sync app data like save states between rooted devices.
What you can NOT do with root on these devices:
Change DPI
Flash Custom Recoveries
Flash Custom ROMs
Sources and Changelos @ github (thanks to nikagl)
Changelog:
v0.9.4
======
- Updated SuperSU to 2.46
- Removed Xposed APK
- Added Liquid S1 support!
v0.9.3
======
- Fix Xposed removal
- Wait longer for MTKLogger to press settings
- Add 811 and KK 810 and 811 to root from system.img
v0.9.2
======
- Removed Xposed till it works
- Add global for allatonce
v0.9.1
======
Added option to enable write access to external sdcard
Added comment for Xposed not working
Removed su delete command in invalid section
v0.9.0
======
- A1-811: Kitkat Support
- A1-xxx: Added proper su-binary
- Added timestamps
- Added descision for Superuser/Supersu
- Added selection for Xposed **not working yet**
- Added option to enable write access to external sdcard
- Added selection to continue automatically (also import the system instead of waiting for enter)
- Removed invalid quote and double exit command
- Added forward delete of characters to make sure Run command is empty
- Added some additional messages during the root process
v0.8.5
======
- A1-810: Fixed target directory for system image (no permissions for /cache directory since Kitkat)
- A1-810: Fixed root from scratch for Kitkat versions (thanks to Just_Another_N00b)
v0.8.4
======
- A1-810: Fixed root for Android Kitkat >= 4.4.2
- A1-810: Fixed abd devices id, changed sind Kitkat update
v0.8.3
======
- Fixed pulling system.img.gz from Windows
v0.8.2
======
- New: Supporting B1-720
v0.8.1
======
- A1-81x: Fixed missing read/write permissions for /system partition (thanks
to twu2!)
- All other devices: fixed missing path to su binary (thanks to arzakon.nn)
v0.8.0
======
- New: Pull system.img.gz from your tablet
- New: Supporting A3-A10
v0.7.8
======
- fixed Swap Internal to External for A1 and B1-710
v0.7.7
======
- Supporting Swap Internal to External for A1 and B1-710
- fixed bug in root from scratch: checking for /bin/su although it's not there
Full Changelog inside the Download.
Error "Permision denied"
entonjackson said:
Changelog:
v0.2.1
======
- Windows: Providing an .exe, so Python is no more needed for Windows users. But you could still use the Python script.
- Unix: Python3 compatibility fixes
v0.2.0
======
- supporting windows 64 and 32 bit (only for rooting with prerooted system.img.gz)
- Linux: added option to choose between 'Root from scratch' and 'Root from prerooted image'
- supporting all versions between python 2.7.4 and 3.3
v0.1.1
======
- supporting linux 64 AND 32bit
- instructions at the beginning
- make compatible to python 3.3
v0.1.0
======
- initial release, only supporting linux 64bit
Click to expand...
Click to collapse
Hi Thanks for your effor and sharing with us.
I got error "failed to copy system._image\system.image.gz to cache/system.image.gz , permission denied
can you give me solution.
thanks very much
cakadut said:
Hi Thanks for your effor and sharing with us.
I got error "failed to copy system._image\system.image.gz to cache/system.image.gz , permission denied
can you give me solution.
thanks very much
Click to expand...
Click to collapse
Windows or Linux?
edit: Ok i found the issue, I just fixed it and going to upload a new version this evening.
New version v0.2.2 is up.
entonjackson said:
New version v0.2.2 is up.
Click to expand...
Click to collapse
I thanks for your work.
I have one problem
failed to copy 'system_image\system.img.gz' to '/cache/system.img.gz': Permissio
n denied
Traceback (most recent call last):
File "easy_root_iconia_b1.py", line 724, in <module>
else:
File "easy_root_iconia_b1.py", line 26, in main
win_main(python3)
File "easy_root_iconia_b1.py", line 642, in win_main
out = p.stdout.readline()
File "subprocess.pyc", line 575, in check_output
subprocess.CalledProcessError: Command ' bin\windows\32\adb.exe push system_imag
e\system.img.gz /cache' returned non-zero exit status 1
Thanks for your futur help
sorry for my english
V0.2.2 still Error
entonjackson said:
New version v0.2.2 is up.
Click to expand...
Click to collapse
Dear Eaton,
after dowbload and run v0.2.2 , still found same problem.
No Progress bar during copy image.
and system shown
failed to copy 'system_image\system.img.gz' to '/cache/system.img.gz': Permissio
n denied
Traceback (most recent call last):
File "easy_root_iconia_b1.py", line 724, in <module>
else:
File "easy_root_iconia_b1.py", line 26, in main
win_main(python3)
File "easy_root_iconia_b1.py", line 642, in win_main
out = p.stdout.readline()
File "subprocess.pyc", line 575, in check_output
subprocess.CalledProcessError: Command ' bin\windows\32\adb.exe push system_imag
e\system.img.gz /cache' returned non-zero exit status 1
Note I am using windows 7.- 64 Bit
Regards,
I uploaded a new version where I added some commands that hopefully resolve the permissions issues.
The problem is, that I can't reproduce it.
Are you rooting the Iconia the first time? or did you already have root before?
Regarding the progress bar. It only appears when writing the system.img.gz
I have Windows 7 64 bit, btw.
entonjackson said:
I uploaded a new version where I added some commands that hopefully resolve the permissions issues.
The problem is, that I can't reproduce it.
Are you rooting the Iconia the first time? or did you already have root before?
Regarding the progress bar. It only appears when writing the system.img.gz
I have Windows 7 64 bit, btw.
Click to expand...
Click to collapse
Dear Enton,
Yes this is the first time B1 will rooting,
I will try again, and report to you,
Regards
cakadut said:
Dear Enton,
Yes this is the first time B1 will rooting,
I will try again, and report to you,
Regards
Click to expand...
Click to collapse
Dear Enton,
The Messages still same, I Attached the Error Pic.
Note :
Iconia B1-A71
ROM 16 GB
RAM 512 MB
Android Version : 4.1.2
Kernel Version : 3.4.0
Image Version : Acer_AV051_B1-A71_RV05RC05_WW_GEN1
Build Number : Acer_AV051_B1-A71_1.258.00_WW_GEN1
Regards,
cakadut said:
Dear Enton,
The Messages still same, I Attached the Error Pic.
Note :
Iconia B1-A71
ROM 16 GB
RAM 512 MB
Android Version : 4.1.2
Kernel Version : 3.4.0
Image Version : Acer_AV051_B1-A71_RV05RC05_WW_GEN1
Build Number : Acer_AV051_B1-A71_1.258.00_WW_GEN1
Regards,
Click to expand...
Click to collapse
I will try to fix it asap. The problem is, that I cannot reproduce it.
I assume that the chmod 777 /cache command that I do, before the adb push command fails with "Operation not permitted."
But this I still don't know how to fix. If someone knows, tell me!
error in v.0.2.3
Dear entonjackson,
thanks for your work and for the time you spend on it.
Unfortunately, I too have problems with the tool for Windows since version 0.2.0 and also with the latest version (0.2.3).
The error messages that I receive are identical (with the same line numbers) to those receiving cakadut in his last post.
I am trying to root Iconia for the first time.
I tried with Windows 7-32bit and Windows 7 64-bit.
My configuration:
Iconia B1-A71 8GB ROM, 512Mb ram
Android 4.1.2
kernel 3.4.0
Image version: Acer_AV051_B1-A71_RV04RC04_WW_GEN1
Build Number: Acer_AV051_B1-A71_1.174.00_WW_GE
I hope you can find the solution.
Thank you for sharing your work with us.
Just uploaded a new version. Could you please try again?
It's hard to fix for me, because I don't have the problem, so all I can do is try. Thanks for the patience!
****, I think i found the bug. Don't try 0.2.4 it won't work also.
foxterrier said:
Dear entonjackson,
thanks for your work and for the time you spend on it.
Unfortunately, I too have problems with the tool for Windows since version 0.2.0 and also with the latest version (0.2.3).
The error messages that I receive are identical (with the same line numbers) to those receiving cakadut in his last post.
I am trying to root Iconia for the first time.
I tried with Windows 7-32bit and Windows 7 64-bit.
My configuration:
Iconia B1-A71 8GB ROM, 512Mb ram
Android 4.1.2
kernel 3.4.0
Image version: Acer_AV051_B1-A71_RV04RC04_WW_GEN1
Build Number: Acer_AV051_B1-A71_1.174.00_WW_GE
I hope you can find the solution.
Thank you for sharing your work with us.
Click to expand...
Click to collapse
Ok, people. With pawitp's help I hopefully fixed the permissions bug.
The problem was, that i was trying to chmod the /cache directory directly from adb shell, which isn't possible. I forgot, that this needs to be done from telnet. So in 0.2.6 I'm setting permission with telnet. This should fix it!
Please report!
Good luck :fingers-crossed:
Dear ethon
hi ethon can u do tutorial video cause i can't found the directory for the "step 6 : go to go to connectivity -> CDS Inforamtion ->Network Utility " and Thnk You :good:
diskenz said:
hi ethon can u do tutorial video cause i can't found the directory for the "step 6 : go to go to connectivity -> CDS Inforamtion ->Network Utility " and Thnk You :good:
Click to expand...
Click to collapse
I will try to do a video tutorial, but it's very easy to do.
Download and install Ex Dialer & Contacts.
Launch the app.
Dial *#*#ENGMODE#*#*.
Swipe from right to left (to Connectivity). Then choose CDS Information and Network Utility.
There you paste this command: /data/local/tmp/busybox telnetd -l /system/bin/sh -p 1234
stell no thing happen maybe i must upgrade to pro version ???
diskenz said:
stell no thing happen maybe i must upgrade to pro version ???
Click to expand...
Click to collapse
No.
Try to dial *#*#3646633#*#*
Else I don't know... this should work in any case...
entonjackson said:
Ok, people. With pawitp's help I hopefully fixed the permissions bug.
The problem was, that i was trying to chmod the /cache directory directly from adb shell, which isn't possible. I forgot, that this needs to be done from telnet. So in 0.2.6 I'm setting permission with telnet. This should fix it!
Please report!
Good luck :fingers-crossed:
Click to expand...
Click to collapse
Thanks entonjackson,
unfortunately with version 0.2.6 I can not get the ADB connection with the tablet. The message it gives me is:
"Trying to Establish ADB Connection (If this hangs, ADB Connection failed. CMD Shell Close and open a new one) ..."
and remains so without making the connection.
If I run the command 'adb devices' in another command line session, the device is seen correctly (0123456789ABCDEF device),
but when I run the new version (0.2.6) of the tool, the message is what I wrote above.
Thank you for your patience.
I built a kernel which includes Mali r3p1 driver.
It helps to port Samsung 4.2.2 STOCK Firmware [ i9300 I9300XXUFME3 ].
It includes correct modem source and all driver will be work.
For developers,
1. You should modify the ramdisk for this kernel.
[ Please mod I9300XXUFME3 for I9305 ]
2. Put my modules to lib/modules/.
3. Make boot.img [ make.sh ]
4. Mod android ROM [ ril, sensors and etc.... ]
[ You should base I9300XXUFME3 4.2.2 ROM ]
Sorry to poor english ;(
I'm Korean.
and I don't have I9305 device.
but Korean Galaxy S3 LTE (SHV-E210S/K) and Korean Galaxy Pop (SHV-E220S) were already ported Samsung 4.2.2 ROM ( I9300XXUFME3 base ).
More Korean device's information link :
http://blog.naver.com/sktjdgns1189/100198243057
http://theteamdev.com
Thanks
Thanks man!!!
Would be awesome to try 4.2.2!
Ah sweet this is probs y my 4.2.2 port didn't work
Sent from my GT-I9305 using xda app-developers app
Could anyone provide a link for a working custom recovery for Samsung SHV-E220S, pls?
I'm looking for 2 days, found 2 versions, Odin flashable, but after flashing OK(?!), I'm still on stock recovery(3e)!!!
SOLVED!
Due to xda mskip problem is solved:
Quote
"Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery it will NOT be overwritten after a reboot. You can also do this via the Toolkit."
All credits go to mskip!
you can find here
bib*oops said:
Could anyone provide a link for a working custom recovery for Samsung SHV-E220S, pls?
I'm looking for 2 days, found 2 versions, Odin flashable, but after flashing OK(?!), I'm still on stock recovery(3e)!!!
SOLVED!
Due to xda mskip problem is solved:
Quote
"Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery it will NOT be overwritten after a reboot. You can also do this via the Toolkit."
All credits go to mskip!
Click to expand...
Click to collapse
http://www.sayanogen.com/file
you can find here
much roms for galaxy pop [shv-e220s]
Hi
Here is the way i used to flash the firmware, i advise to backup all your data before the flash.
All the files here are provided without any waranty.
Flash at your own risks.
Remember that go back to 4.3 is impossible after this procedure.
You may too void your knox counter when you attempt to root your device...
Click the pictures to open the root of the Mirror and find others goodies.
- Flash The Firmware :
First: Set the reactivation lock setting of your phone to OFF.
Be sure the battery of the phone is full.
- Uninstall Kies if you have it on your computer to avoid conflicts.
- Download PC Odin and Install / update the drivers from Samsung[/URL], that's all you need.
- Best and safe way is to use the original stock usb3 cable and make the job on a portable computer with his own power supply (battery connected).
1 - Download the latest repacked rom in this folder and extract it.
This is pure stock rom with only Multi-CSC OXXEND2 added.
Currently, this rom contain 19 Country Codes:
BGL, CYO, ERO, MSR, ORX, PHE, ROM, SEB, SEE, SIO, TEB, TOP, TPH, TRA, TSR, TWO, XEF, XEH, XSK
As it have a small sized hidden partition there is no need of any PIT File. More safe in my opinion.
If you need another CSC, maybe one of then is yours:
The Multi-CSC VFGENA4, 19 Country Codes:
ATL, CNX, CYV, MOB, MTL, OMN, PRO, SIM, SWC, TCL, TOP, VD2, VDC, VDF, VDH, VDI, VGR, VOD, XFV
As it have a small sized hidden partition there is no need of any PIT File.
The Multi-CSC OLBEND1, 10 Country Codes:
GLB, MM1, SIN, SMA, STH, THL, XME, XSP, XTC, XTE (Asia)
As it have a small sized hidden partition there is no need of any PIT File.
The Multi-CSC OXAEND1, 5 Country Codes:
BTU, DBT, ITV, XEF, XEO
As it have a small sized hidden partition there is no need of any PIT File.
The Multi-CSC OJVENB2, 3 Country Codes:
KSA, XFM, XSI
As it have a small sized hidden partition there is no need of any PIT File.
The CSC ITVEND1, 1 Country Code:
ITV (Italy)
As it have a small sized hidden partition there is no need of any PIT File.
The CSC ZZHENE3, 1 Country Code:
TGY (Hong Kong) - The attached modem ZHUENE2 is here.
As it have a small sized hidden partition there is no need of any PIT File.
The CSC VNZDMJ4, 1 Country Code:
VNZ (New Zealand)
The csc parts are from 4.3 rom but are confirmed working fine.
As it have a small sized hidden partition there is no need of any PIT File.
Three others CSC for specifics operators in France.
As they have a small sized hidden partition there is no need of any PIT File.
Check at the bottom of this post for French thread.
Just grab the one you want and put it in CSC in PC ODIN during the same flash process and it first flash the CSC inclued in the firmware, and then overwrite the CSC with the one you added.
2 - Download CF Auto Root for KitKat from Chainfire ODIN version.
Extract the tar.md5 file inside the zip to use with pc odin.
3 - Download the custom recovery PhilZ Touch ODIN version.
I advise to apply this unlock procedure before anything to avoid flash errors:
-> You need Triangle Away from Chainfire with a root acces granted.
Free version is avaible but consider to support the dev for his great job...
a/ Install the app on your phone.
b/ Run Triangle Away and Reset Flash Counter - Follow exactly what the program ask.
At the time to choose the way to reboot after the reset is done in recovery, choose reboot in download mode and then start the flash process immediatly.
4 - In download mode flash the file that you had previously downloaded N9005-hlte_PDA-xxxxxxx_CSC-xxxxxxx_MODEMS-xxxxxxx_REPACK.tar.md5 with PC Odin in AP.
Do not forget to check/enable the Phone Bootloader Update option in pc odin. (seems working nevertheless without this option ticked)
Leave all others one by default.
Make sure re-partition is NOT ticked.
If you have an error (size error - Your phone may mismatch with this rom, another Samsung lock...) as odin fail at the end of the flash process.
- Shutdown the phone, disconnect the battery, disconnect the phone from your computer and wait a minute, return to download mode.
- Download and flash the file wich contain the CSC that you want.
5 - Auto self-reboot, let the stock recovery do his work completly (the green android man).
If you don't want to install root and a custom recovery, you can stop here.
6 - Go back download mode, flash the PhilZ Touch recovery with pc odin in AP.
7 - Again, in download flash, CF Auto Root with pc odin in AP, let the installation process terminate.
Note: If you were previously rooted, jump this step and download, If not yet done, SuperSu to update by flashing the file in custom recovery..
In this case, re-flash CF Auto Root will loose all your settings of SuperSu...
8 - Download the fix for the ExtSdCard issue and flash it in custom recovery.
This is a Google security restriction, unnecessary to wait for a fix from Google, just from developpers of apps. Quick way is to apply this fix.
9 - Don't forget BusyBox which should be usefull too.
- About Mobile Odin :
As Mobile Odin seems to be unable to update the bootloader, don't use this one to avoid brick issues when operate with a different rom version than you have.
If you are already on the same firmware, you can use Mobile Odin to re-flash the rom or any other single part:
- Copy the file on your phone.
- Open this file in Mobile Odin.
- Enable EverRoot and Inject Superuser (SuperSu) in case of a system flashing.
- Choose to reboot in Recovery when you flash System and Cache partitions. If not, you may have problems regarding the CSC.
- Start Flashing.
- Do not skip md5 check to gain a little time. (For the life of your phone...)
- Issues :
All theses solutions were tested by me and worked for me, but without any other warranty.
The CSC region code or version are invisibles, the CSC folder is missing in system/.
The stock samsung keyboard crash often once booted.
You need another CSC (warning, you wil loose all your datas and settings, change for another CSC perform a wipe of the phone)
- Check here for the file you need, download and extract it.
-> Apply the Unlock Procedure.
- Flash the file N9005-hlte_CSC_xxxxxxx_RECOVERY-xxxxxxx_REPACK.tar.md5 with pc odin in CSC.
The Modem is not updated.
Download and extract the .tar.md5 modem file.
-> Apply the Unlock Procedure.
- Flash the file that you had previously downloaded N9005-hlte_MODEMS_xxxxxxx_REPACK.tar.md5 with pc odin in CP.
- Reboot normally.
The Bootloader is not updated.
You can check by using this app.
-> Download and extract the .tar.md5 bootloader file.
-> Apply the Unlock Procedure.
- Flash the file N9005-hlte_BL_xxxxxxx_REPACK.tar.md5 with pc odin in BL and check/enable the Phone Bootloader Update option.
- Reboot normally.
Flash player doesn't work anymore.
-> Install Firefox last up to date version and the original latest apk from adobe, nothing else to do.
-> If you prefer Dolphin, download the special version of adobe flash player, more here.
Maybe someone make an xposed module later, it should be a dream...
This fix seems working with this rom (bootloop efs corrupted related).
Not personally affected, just tested the flash.
Download here too.
After all this procedure, you should be fine, upgraded and with all yours datas and settings...
At this state, i just made a wipe of the cache and dalvik cache with phil'z recovery.
- Tune :
- Enable Init.d Support.
- To simply restore the sound at the (de)connection of the charger, you can install this app.
- If you want an imaged battery, you can use RECOVERY - SystemUI N9005 xxxxxxx MOD tkari4-Version by tkari4 based on the guide from parkhyb.
Basically revert to the old 4.3 style for battery and network icons.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just Flash the mod with any custom recovery.
To revert back to the original situation, just flash in custom recovery the file RECOVERY - SystemUI xxxxxxx ODEX STOCK. (STOCK ODEX version)
You can use my blue battery mod. (I reworked a little the graphics for a better scale.) Just extract the .rar archive and install normally the apk Inside, you need too a working Xposed Framework installed.
You can find other Xposed compatibles battery Mods here.
Just reboot once installed.
Many Thanks to tkari4 for keeping alive his mod. :good:
- The repacks i made still works fine.
The rom repacks are made by me with this tool.
Many thanks and credits to all the persons who made this possible.
Notes:
As i do not have the time to download/extract all the roms, if someone needs another CSC repack for him or just to share, please post here with a link for the extracted CSC files only (cache.img.ext4 - hidden.img.ext4) related and with all the details (region, full code name, original rom it come from ... )
To unpack a .tar.md5 file, simply rename it as .tar and extract the content with any good archive software.
I will centralize here.
All others requests in any another form will be ignored, thanks for understanding.
To keep as simply and clear as possible, i will maintain on the Mirror and on thread only the latest updated rom, so if you put elsewhere any link from here, it may be broken in the time, the only ones which would be permanent is the one of the folder and the one of this thread. If you Mirror any file, thanks to keep credits.
Keep a local copy of the downloaded files if you think you will need then later as the content should be updated here.
I maintain the updates only for multi-csc repacks and keep others ones in the mirror, if you need one of theses mono-csc wich is not updated with the latest recovery avaible, simply ask here...
French users, clone thread is here.
Just press thanks if i helped.
Did you search the forum before posting? because if you did, you'd see that there are 500 thread about this already.
polish_pat said:
Did you search the forum before posting? because if you did, you'd see that there are 500 thread about this already.
Click to expand...
Click to collapse
Yes, every day i do.
And i saw no thread that talk about merging two différents roms to make a new one for a specific country, centralize all the majors tools with direct download links for correct versions to avoid confusions between JB & KK, that i often saw, and attached xda threads, and too provide others files needed at the same place for my device (n9005)
Maybe i had read the forum more often than you think...
Sincerly.
Perhaps you should look again
http://forum.xda-developers.com/showthread.php?t=2617932
http://forum.xda-developers.com/showthread.php?t=2631395
http://forum.xda-developers.com/showthread.php?t=2614787
http://forum.xda-developers.com/showthread.php?t=2618633
these are just thread in general section, hit in the past 24 hours, i didnt even get the ones in FAQ nor in dev section, i'm sure i could add about 10 more just by looking at the first page of each. If your thread is not getting hits from anybody, must be for a reason. Just sayin'
I made also my Rom N9005XXUENA7_OXXENA5_XXUENA2_ NoBootloader whit this TOOL from A.S._id Dev. Thanks @A.S._id
Only this files:
boot.img
cache.img.ext4 -->from NA6 (OXX)
hidden.img.ext4 -->from NA6 (OXX)
modem.bin
NON-HLOS.bin
recovery.img
system.img.ext4
Whitout Bootloader (5 files). Work well whit BL XXUENA6 and no Knox appl's.
At first boot, after enter whit my language, I have my csc TPH automatic, alright.
It's very good this [TOOL] TAR.MD5 PACKAGER and easy to make changes whit.
Anyway, thanks by Your work.
Best Regards
Valente
=======================================================================================
polish_pat said:
Did you search the forum before posting?
Click to expand...
Click to collapse
polish_pat said:
Perhaps you should look again
Click to expand...
Click to collapse
Hi Dear @polish_pat
Please, we have a MODERATION to see all Member's work. Not censure this Member. He have rights like You.
Thank You
polish_pat said:
Perhaps you should look again
....................
these are just thread in general section, hit in the past 24 hours, i didnt even get the ones in FAQ nor in dev section, i'm sure i could add about 10 more just by looking at the first page of each. If your thread is not getting hits from anybody, must be for a reason. Just sayin'
Click to expand...
Click to collapse
You made a thread, Others made a thread, i made a thread too, i just wanted to simply share my experience in another form, without any other pretention.
You seems to have a problem about that, not me.
You have time to waste, not me.
I'm not interested to play to the one that has the biggest.
Sincerly
Le [email protected] said:
You made a thread, Others made a thread, i made a thread too, i just wanted to simply share my experience in another form, without any other pretention.
You seems to have a problem about that, not me.
You have time to waste, not me.
I'm not interested to play to the one that has the biggest.
Sincerly
Click to expand...
Click to collapse
i made a thread a month ago, when it was relevant and nobody else did it.
Le [email protected] said:
Hi,
Set the reactivation lock setting of your phone to OFF.:
Click to expand...
Click to collapse
How do you do that on 4.3? (It's not on security setting).
Samsung Galaxy Note 3 T-Mobile USA.
johnvicencio said:
How do you do that on 4.3? (It's not on security setting).
Samsung Galaxy Note 3 T-Mobile USA.
Click to expand...
Click to collapse
I found it easly in security settings.
Maybe because you are on a Galaxy Note 3 T-Mobile USA, i have the HLTE international one.
In any case, check this video at about 2.30 mn
Le [email protected] said:
I found it easly in security settings.
Maybe because you are on a Galaxy Note 3 T-Mobile USA, i have the HLTE international one.
In any case, check this video at about 2.30 mn
Click to expand...
Click to collapse
I see thank you. That doesn't exist on T-Mobile USA at least not on 4.3.
1 - Download the official Poland rom...
2 - Download any NA7 rom...
To this step's We have here a MIRROR on MEGA Host.
Updated the op with a link to the repacked rom and refreshed the guide.
So it is more easy and simple, i think.
Good and informative First Post. Thanks!
Maybe you can do the same with the update that came out today
Pierre118 said:
Good and informative First Post. Thanks!
Maybe you can do the same with the update that came out today
Click to expand...
Click to collapse
Op Updated
No need to repack the whole firmware as all which is needed is Inside.
I am currently upload the rom to mirror it ...
Just made a new repack for the multi-csc.
Just flashed over the NA7 rom by following my guide and all went fine.
No full wipes.
Just made a wipe in dalvik cache and cache in recovery once done.
Great and complete Guide. Useful this ALL IN ONE PLACE. Bookmarked.
Thanks
I QUOTE from my THREAD next useful posts by @letama and @Le [email protected]
After this question to a member that not managed to flash the Bootloader NB3:
ValenteL said:
What Rom have You installed? If You have flashed the XXUENB3 why You are in NA6 BL?
Click to expand...
Click to collapse
letama said:
There is a catch in going from NA6 to NB3, it seems bootloader flashing is ignored now in NA6 BL if your rom status is custom. Solution is triangle away, reflash na6 stock, then make sure that you status is official before flashing NB3.
Click to expand...
Click to collapse
Le [email protected] said:
I was on NA7 BL previously flashed over NA6 BL without any problem.
Followed your trick and flashed my own made NB3 flashable file.
I did not any reflash, just reseted with triangle away.
And it worked, i am now on NB3 BL.
Updated my thread too..
Thanks.
Click to expand...
Click to collapse
letama said:
Thanks, good to know that reflashing pure stock is not mandatory, so the bootloader checks custom status flag only and not the whole firmware. Great, will save time for next one .
Click to expand...
Click to collapse
Updated the OP with a new version of Flash Player i found on xda wich work with Firefox too now.
Hi @Le [email protected]
Only for this time: Do not forget to check/enable the Phone Bootloader Update option in pc odin.
I don't understand why, if we flash a complete Rom whit a new bootloader. We not update the bootloader installed. Why You have this opinion now?
Thank You
Hi ValenteL
I saw (here or on other frenchs forums, no links to provide, forgot then) twice posts of somes personnes who don't have checked the option and have updated their bootloader and others one who don't had bootloader update and got soft brick issues as the rest was updated (JellyBean to Kitkat essentially)
It is usually advised here to check this option.
I not personnally took the risk to bypass this option in pc odin and always used it, so i can not confirm if it is important, effective or not.
There is this option in pc odin, i think too this is not for nothing at all.
For all this reasons, i prefer advise to enable this option when flashing a new rom, and it cost nothing to do.
Personnaly, i think it is important to do when using multi-files roms as the first Poland Leaked KitKat, but the bootloader update must be done automatically when flashing a single file rom which contain Inside all the needed parts.
Of course we can have problems when the knox is trigerred or the status of the rom is to custom, then somes parts seems to be 'jumped' when flashing. I feel this fact is increasing in the time.
When i bought my note 3, Under JellyBean, in France, i updated the rom with the latest version of JellyBean avaible on sam mobile for my country (XEF) and had no issue after the flash.
I got problem when i starded to flashed KitKat from others countries as the XEF one is not yet avaible and as i am a little an impatient flash-addict.
I wonder sometimes if i could have all this problems if were more patient and waiting for an upated version for my country.
At this time i identified three parts wich seems locked (not a secret).
CSC -> Ok, Samsung do not want i flash from another country, new policy from Samsung to lock by geographics sectors.
Modem -> Ok, region lock again.
Bootloader -> Why ? Does samsung want to block customs rom such CM, roots and others sames things? And knox related certainly too.
Samsung want to control and limit me a lot, to make more money with me.
Me, i want to be able to do ALL what i want with the device i bought, this is mine, as i can do with my Note 1.
There is a lot of chances that samsung never see again my money...
Time to bed here.
Sincerly
@ Le [email protected], Mega gives me a error when trying to download BOOTLOADER_N9005XXUENB3_REPACK.rar. Is there something wrong with the file?
---------- Post added at 09:22 PM ---------- Previous post was at 08:36 PM ----------
Pierre118 said:
@ Le [email protected], Mega gives me a error when trying to download BOOTLOADER_N9005XXUENB3_REPACK.rar. Is there something wrong with the file?
Click to expand...
Click to collapse
Never mind, Mega had a problem. Download is ok now.
Inception is a set of tools for auto configuring android devices. You can do the following:
Include any apps to be (pre)installed
Remove any stock apps
Root the device
Install busybox
Configure Wifi networks
Generate all device settings
Patch APKs
Replace Kernel, and/or ramdisk data in both boot and recovery imgs
Place your adb keys, configure USB debugging
You specify all this in a JSON config file. And then inception creates the following depending on what you specify in your configuration:
OTA Update Package that applies all your changes once installed
Modified recovery img
Modified boot img
Cache img that bundles the update package and instructs android to install it once in recovery
Odin flashable tar.md5
With the right configuration, you can also generate auto-root update packages, or update packages that just install busybox, or both.
Code:
incept autoroot --code samsung.degaswifi
or
Code:
incept busybox --code samsung.degaswifi
Or out of a stock recovery img:
Code:
incept autoroot --code inception.device --recovery /path/to/recovery.img
Inception does not create a full system image or compile roms. It bundles only the required changes in an Android update package and generates an update script which applies those changes. This results in update packages that are substantially smaller than when flashing a whole ROM.
As an output example, I posted this Samsung SM-T230 auto-root package, and another Samsung SM-T113 auto-root package that were both generated using inception.
Full source code for inception and installation instructions are available here: https://github.com/tgalal/inception
Please post feedback/questions/problems here
XDA:DevDB Information
inception, Tool/Utility for all devices (see above for details)
Contributors
tgalal
Source Code: https://github.com/tgalal/inception
Version Information
Status: Testing
Created 2015-06-11
Last Updated 2015-06-11
i have a file %USERPROFILE%\.android\adbkey.pub in windows, how to incept into /data/misc/adb/adb_keys with odin? (Samsung Galaxy Tab 3 Lite SM-T113)
where exactly place the key? is this a JSON config file?
Code:
{
"update": {
"adb": {
"__make__": true,
"keys": [
"PUBLIC_KEY_DATA_1",
"PUBLIC_KEY_DATA_2"
]
}
}
}
edit: found the README.md but it is a lot of information. can you please post minimal steps how to create a tar.md5 from adbkey.pub?
1. install linux
2. add packages (requirements)
3. download and install inception (at this point it fails with exit 1 older version of dulwich)
4. incept bootstrap?
5. pass the adbkey.pup to json?
6. incept make?
7. generate odin package??
8. ... ?
Surely someone has or can get the Official ROM for The Doogee T5s Note it's T5s not T5 nor T5 Lite.
It's Processor is MTK6735 not MTK6753. I need the ROM with the Scatter file. If you have a Custom Recovery TWRP/CWP that would be helpful too.
If need be I'll put a bounty on it but I am hoping some samitan will be so kind as to post it.
Thanks in Advance.
Included is a screen cap of the Diagnostic Software:
I am looking for the same!
T5 Rom Needed
Hi, i'm looking for the same rom, i miss my phone's imei,
I was able to install the t5 lite Rom, but the NVRAM partition seems to be incompatible.
Thanks
Doogee t5s Stock rom
Please doogee t5s Stock rom link
Not a new ROM, but a step forward. (TWRP & SuperSU)
ethan_hines said:
Surely someone has or can get the Official ROM for The Doogee T5s Note it's T5s not T5 nor T5 Lite.
It's Processor is MTK6735 not MTK6753. I need the ROM with the Scatter file. If you have a Custom Recovery TWRP/CWP that would be helpful too.
If need be I'll put a bounty on it but I am hoping some samaritan will be so kind as to post it.
Thanks in Advance.
Included is a screen cap of the Diagnostic Software:
Click to expand...
Click to collapse
(Edited: Removed all external links due to my newcomer status)
To be brief:
I have not found the stock ROM for the DOOGEE T5S, nor tried any new custom ROM to replace it.
I have managed to install a TWRP with SuperSU powers.
These instructions might help you clean up your current system.
Bonus: the recovery menu (TWRP) is multilingual.
Caveat emptor:
My stock ROM came with a nasty couple of Trojans(a) and other potential malware(b) embedded. The Trojans subscribed me to "premium" phone services, costing me some money. I went through the whole hassle in order to get rid of them.
If you have a DOOGEE T5S, your phone is probably infected too. Owners of other DOOGEE phones should beware. (c,d,e)
DISCLAIMER: The following instructions could seriously harm or brick your phone. I make no guarantees of any type, shape or form as to the end results. These operations WILL VOID YOUR WARRANTY.
What I did:
Last warning: during these operations I had to do a factory reset of my phone. I strongly recommend you BACKUP ALL YOUR DATA before you continue.
1] Install TWRP & root the phone (f)
* Download the required files:
- The TWRP image file here:
[Search the NEEROM dot COM website]
- The SuperSU patch file here:
[Search the NEEROM dot COM website]
* Unrar the TWRP image. Leave the SuperSU patch zipped.
* Enter fastboot mode.
Using ADB in terminal:
Code:
adb reboot bootloader
* Flash the TWRP image in the recovery partition.
Code:
fastboot flash recovery /path/to/twrp/image/recovery.img
(in my case fastboot requires root privileges, so sudo it.
* Reboot and enter in recovery mode.
In fasboot send the reboot system, but press Volume UP during reboot.
* Enter into TWRP and Install the patch "SuperSU 2.78-SR1"
Once in TWRP, ADB is again functional.
Load SuperSU patch to your sdcard:
Code:
adb push /path/to/your/patch/SuperSU_Pro_v2.78-SR1.zip /sdcard/
In the TWRP menu, go to "Install". Browse to the "sdcard" directory. Select the SuperSU patch and Install.
* Reboot to the system.
Beware: system will not start if you haven't installed the SuperSU patch. It will loop at startup, and won't progress beyond the startup logo.
2] Initial setup.
From factory reset, the phone will go through the first installation procedures. Follow the setup until your system logs on, and you can connect again to your phone via ADB.
3] Get rid of the malware.
* Disable the apps:
Without need of supercow powers:
- Enter an adb shell:
Code:
adb start-server
Code:
adb shell
Disable the apps:
In a normal ADB shell:
Code:
pm disable your.package.name.here
If you don't know the name of the packages, you can always get the full list with:
In your normal terminal (not adb):
Code:
adb shell 'pm list packages -f'
In an ADB shell:
Code:
pm list packages -f
* Remove the apps:
First try a normal removal. If they are system apps this will fail, but try anyways.
Code:
pm uninstall your.package.name.here
* Escalation to remove apps:
Now that the first try has failed, get supercow powers:
In the ADB shell:
Code:
su
(You should get a message on your phone telling you that ADB is requiring root privileges. Say OK)
Now your ADB console should read something like "[email protected]"
And we try again:
Code:
pm uninstall your.package.name.here
But we have a super hardcore app that fails to be removed with the normal supercow powers. So we step it up. (g)
Code:
pm uninstall -k --user 0 your.package.name.here
... SUCCESS!
But wait, the app is still there. Yes, you only removed it for root. So... lets do some overkilling:
Meanwhile:
Let's check the ID of the system user:
Code:
id system
In my phone "system" is 1000
So, here we go:
Code:
pm uninstall -k --user 1000 your.package.name.here
Your mileage may vary. Sometimes the first command does the trick, sometimes the app is still there.
Is it gone? Not always.
Can it creep out from the netherworld? Maybe. So, let's beat the dead horse.
* Silence the dead (h)
Just in case the app is still lurking, let's make it harder for it to creep up on us.
Code:
pm hide your.package.name.here
Great. Silent in its coffin.
But is the app still there? Sadly, yes. I looked around and the apps were still there, in a privilege data folder.
* Root it out (i)
This is an extreme measure. You can really harm yourself doing this, so... you have been warned.
At this stage, you should be using supercow powers. If you are not, brief recap:
Code:
adb shell
su
Now, the systems partition is read only, so you cannot remove the content there. So, to remove the files there, you have to remount it in read-write mode. Here we go:
Code:
mount -o rw,remount /system
Now, find the app directories you want to remove. In my case, the apps were in "/system/priv-app". So:
Code:
rm -rf /system/priv-app/YourAppFolder/
And, eventually, erase the associated data:
Code:
rm -rf /data/data/your.package.name.here
A read-write /system/ partition is not a good idea, so we reset as read-only:
Code:
mount -o ro,remount /system
[You might need this]
I don't remember if this is required. Maybe to be able to write to the recovery partition via fastboot...
Code:
adb shell setprop ro.secure 0
This voids the GUARANTEE. You have been warned (AGAIN).
----
(a) Found Trojan.Hiddad & Adware.Retsanvie. Probable carrier app: com.gangyun.beautysnap (aka com.android.snap).
(b) Antivirus programs tag the OTA program as potentially dangerous: com.fota.wirelessupdate
(c) [Some articles on DOOGEE and LEAGOO shipped with Trojans]
(d) [Some articles on DOOGEE and LEAGOO shipped with Trojans]
(e) [Some articles on DOOGEE and LEAGOO shipped with Trojans]
(f) [NEEDROM dot COM website]
(g) [ROMPROVIDER dot COM website]
(h) [Reddit Post]
(i) [ANDROID dot STACKEXCHANGE dot COM Post]
rrm. said:
(Edited: Removed all external links due to my newcomer status)
To be brief:
I have not found the stock ROM for the DOOGEE T5S, nor tried any new custom ROM to replace it.
I have managed to install a TWRP with SuperSU powers.
These instructions might help you clean up your current system.
Bonus: the recovery menu (TWRP) is multilingual.
I am amazed you were able to do as much as you did with just ADB! Usually this type of phone (ChinaPhone) requires flashing the bootrom with a utility called SP Flash Tool and , VCOM Drivers as well as the aforementioned Scatter file! BTW There is a rom for the T5S LITE but not T5S (Despite many many requests, falling on deaf ears)
Click to expand...
Click to collapse
ethan_hines said:
rrm. said:
(Edited: Removed all external links due to my newcomer status)
To be brief:
I have not found the stock ROM for the DOOGEE T5S, nor tried any new custom ROM to replace it.
I have managed to install a TWRP with SuperSU powers.
These instructions might help you clean up your current system.
Bonus: the recovery menu (TWRP) is multilingual.
I am amazed you were able to do as much as you did with just ADB! Usually this type of phone (ChinaPhone) requires flashing the bootrom with a utility called SP Flash Tool and , VCOM Drivers as well as the aforementioned Scatter file! BTW There is a rom for the T5S LITE but not T5S (Despite many many requests, falling on deaf ears)
Click to expand...
Click to collapse
Yes, I did notice the lack of help regarding the release of the stock ROM. Given that (in my case) it was a compromised ROM (Trojans & Co.), I would imagine why they would not release the original one. It surprises me they are not releasing a cleaned up version, though.
The TWRP for the T6 works fine on the T5S. I was tempted to try one of the custom roms for T6 pro available at needrom DOT com. The thing is I need a working phone, so I cannot hard or soft brick my T5S. Not having a fallback ROM, that kind of nails it down for now.
I'm deploying LineageOS on a series of other devices. If all goes well, I might give LineageOS for T6 pro a try on my T5S. My concern is not the chipset of the SOB, it's the periphericals. Chiefly the capacity to recognize the SIM cards. It would defeat the purpose to have a running Android Nougat on my phone and not be able to make calls.
Click to expand...
Click to collapse
Replacement stock ROM: use the T5 lite stock ROM
ethan_hines said:
Surely someone has or can get the Official ROM for The Doogee T5s Note it's T5s not T5 nor T5 Lite.
It's Processor is MTK6735 not MTK6753. I need the ROM with the Scatter file. If you have a Custom Recovery TWRP/CWP that would be helpful too.
If need be I'll put a bounty on it but I am hoping some samitan will be so kind as to post it.
Thanks in Advance.
Included is a screen cap of the Diagnostic Software:
Click to expand...
Click to collapse
UPDATE:
Previously described to have successfully flashed TWRP 3.0.3 from needrom, with root powers, allowing for housekeeping of the original ROM.
I now inform you to have successfully flashed the T5 Lite stock rom (the UPDATE) into the T5S.
The ROM is apparently fully functional: RadioFM, front camera, back camera, WiFi, SIMs. I have not found any non-functioning feature.
I have tried to flash in a custom ROM, but until now I have been unsuccessful. While flashing the ROM with TWRP I get a 255 error. I'm thinking I need TWRP 3.1 or 3.2 to flash the custom ROMs I have. Sadly, there doesn't seem to be a TWRP 3.2 for the DOOGEE T5 lite/T5S.
I'll keep you all posted.
Need SuperSU
Is anyone here who can send me the "SuperSU_Pro_v2.78-SR1.zip"
PLEASEEEE don't send me the needrom link. Thanks!
ethan_hines said:
Surely someone has or can get the Official ROM for The Doogee T5s Note it's T5s not T5 nor T5 Lite.
It's Processor is MTK6735 not MTK6753. I need the ROM with the Scatter file. If you have a Custom Recovery TWRP/CWP that would be helpful too.
If need be I'll put a bounty on it but I am hoping some samitan will be so kind as to post it.
Thanks in Advance.
Included is a screen cap of the Diagnostic Software:
Click to expand...
Click to collapse
Finally the T5S firm is available at doogee.cc comunity!
I had to use it to revive my T5S after trying to flash TWRP recovery: I tried TWRP from T5, T6 and T6 Pro but in all cases phone got stuck in a boot loop. :crying:
I don't know if the official firmware contains bloatware... I'll keep any eye on it...
Doogee T5S rooten
After some time consuming experiments, I finally got my T5S rooted.
The main point after installing TWRP, througth fastboot or SP-Flash tool is:
1st: Booting immediatly into the recovery mode (prevents the operating system to switch to the original recovery app)
2nd: installing Super-SU before booting in the system (I my case it prevents the boot-loop. I think a must!)
When you finally restarted successfully the operating system, deactivate the APP "Aktualisierung mit Funknetz" (in englisch I think something like "OTA WiFi upgrade") , which seems to be reason for the malware. I my case, since I did it, no pop ad's appeared! (since 3weeks)
Remark:
As the T5S has the some CPU as T5light you can flash this firmware as well. I did it with the SP-tool but with same problem of poping up of unwished AD's, i.e. you have to root to put the above mention APP in deactivat mode (I did it with the app: 3C System Tuner Pro).