I flashed Faast JB to my Amicroe tablet and the touchscreen wouldn't work at all. I applied some of the gsensor whatever files to the tablet, and now the touchscreen works but it appears to be flipped (i.e where i press does not correlate to where the screen recognises it.) What can I do?
Alternatively, does anyone have a backup Amicroe Rom?
Hello,
Unfortunately that is not a common device and I was unable to find any relevant threads out here. However you can register if you want and ask your question here
Good luck
Related
Hi All,
I'm completely lost on this one, I want to get help with a bricked device but do not know what the device is, thus unsure where to ask.
I tried to flash CM10 onto the device, but now realise I got something very wrong as touch screen does not work.
Only buttons on device are volume or power, Seemingly i cannot find a combination of these that will go to bootloader, adb nor any other program i have tried will pick up the device, trying with UBUNTU 14.04 and Windows 7 both without success. Gets stuck on a screen telling me about compatibility zoom (all it needs is press ok to continue but touch screen unresponsive).
Its an unbranded 7 inch tablet with an Allwiner A10, attched should be all the photos needed for someone to work out what it is (i hope) as well as one before I broke it of its original ROM build. Has a mini usb connection on it for connecting to PC.
Worst case i want to flash the original ROM back on it, best case I get new fancy ROM working once I can establish which device it is.
Any help would be much appreciated.
I used to own an a7 and was able to find a few ROMs for that tab back when, I'm sure there is something out there for your device but be sure to only flash software meant for your device or there can be serious issues
A great place to ask for help will be in the general q&a forum found here
http://forum.xda-developers.com/android/help
Best of luck!
Thread closed an thanks!
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......
Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
I tried to install unofficial cwm for my tablet cause it is chinese or something and it failed,i backed up the stock recovery in internal memory before doing it but forgot to copy from the device to my pc now i flash different recoveries and none works,btw when it starts i hear the usb from my pc working which mean it might start on fastboot,i wan't to ask if:
1)There is any way i can access the internal memory through fastboot so i can get the original recovery and install it.
2)If someone here has a backup of the recovery (The model is eStar IPS Quad Core 7' tablet).
3)If there's an unofficial cwm that works with tablets like the one i have.
Thanks,and please even if you are not sure just answer i want to save it cause i bought it yesterday
Unless you can find stock firmware, and flash the recovery. You may wish to ask in the thread that you found the recovery (if the thread was meant for your device). I was unable to find anything about your device on XDA
I can only suggest you register and ask your question here http://forum.xda-developers.com/showthread.php?t=2259645
Good luck
First I installed Samy Deluxes ROM (Pick your king) everything went fine exept for the bootloader(using cwm) touch was not responding so i had to install it using the volume, power and home buttons. I somehow managed to install the rom but then the setup menu was turned horizontally( i was holding the device in a normal position....vertically) then i also realized that the touchscreen wasnt responding either. (hardware buttons were all working fine). I decided to do a hard reset and install a diffrent GS5 rom( this time went for Imperium v3.5). EXACT SAME SH*T. Touchscreen not responding + Gyroscope not working properly....What can I do to fix the Screen+Gyro problem and enjoy the Galaxy S5 rom???
PS: Sorry if I'm making myself unclear or am to stupid to know the obvious solution. I'm new to the Android-Modifiying process.:crying:
Hi,
Best to ask the experts who own your device about this.... In the dedicated help thread in your device section,
http://forum.xda-developers.com/showthread.php?t=2700073
Good luck!
Hi every body so it's in the title it's started when i was useing cyanogenmod rom 5.1 on my phone rooted and CWM recovery on it the touch screen gone crayz with touch every where, after a reboot the touch screen don't respond any more just sometime if i push hard it goes, i did a factory reset and returned to a original rom + root + CWM it worked for 2 days and the problem comes back, so now after many trys i found that when i rom and install a recovery it work for a while and the problem return so i think that it's not a harware problem, so if someone can help me to find the source of the problem and to solve it.
XDA Visitor said:
Hi every body so it's in the title it's started when i was useing cyanogenmod rom 5.1 on my phone rooted and CWM recovery on it the touch screen gone crayz with touch every where, after a reboot the touch screen don't respond any more just sometime if i push hard it goes, i did a factory reset and returned to a original rom + root + CWM it worked for 2 days and the problem comes back, so now after many trys i found that when i rom and install a recovery it work for a while and the problem return so i think that it's not a harware problem, so if someone can help me to find the source of the problem and to solve it.
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Galaxy Note 2 Q&A, Help & Troubleshooting
Your device experts are located there....(You will have a much better chance of getting help there)
Also, here is the Main Galaxy Note 2 Area just in case:
http://forum.xda-developers.com/galaxy-note-2
Always Remember to use the Search...
Thank you! Hope this help!