Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Just adding somting as a requirement.
If you need to by pass the mouse with OTG stuff use mymobiler . com google it
gr8 helps thanks:fingers-crossed:
PS as External SD card is required to make it work
cwm problem
Pls help, I have rooted my P500. But unable to install CWM recovery. I tried both methods Novotools and cem5ics command prompt method.
Novotools installs cwm in my tab but when i reboot it it hangs at mmx logo.
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
thatsgamer said:
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
Click to expand...
Click to collapse
I am going to replace my tab today. I know the fix ! Just wait !
Thanks for your patience.
devanshkumar said:
Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Click to expand...
Click to collapse
Thanks to this post i was able to unbrick, however there are a few steps that i would like to add to make it more clear.
at Step 4: After pressing the power button ten times, you will see that a pop up comes tellinga new hardware found and will ask to locate the drivers, now click continue to automatically update the driver. it will fail and then an option to browse and locate the driver will pop up. Now browse to the folder where you extracted live suit pack and choose the USB driver folder to install the driver. Next it will come up with two pop ups press Yes both the times
Step 6 Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer
Step 7 is the same
Whilst putting the backup file on the tab create a clockworkmod folder in the root of the tab create another folder called backup and extract the backup file downloaded onto it.
It worked
All the steps work perfectly..I was able to unbrick the device with touch using first Livewire image .. Thanks a ton developer..
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
deadnight.warrior said:
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
Click to expand...
Click to collapse
It looks like there is an issue with CMW installation. Follow rooting and other steps all over. Restoring backup of 26 should be good enough
Sent from my HTC One X+ using xda app-developers app
bricked funbook
guys,
i installed custom rom from cwm names cyanbook based on jelly bean but when phone started it stucked on mi logo....i tried many times but nothing happened...so i downloaded livesuite from some site and stock rom as on that site...and flashed the same.....but now i can see only blank screen.... pls guys help me...........is there any way to install stock rom...
Guys today I am going to discuss on how to Sign Your Own Moded Apps
Requirements:-
1) Sign_app.zip [-Download][ http://www.mediafire.com/?0rkk8hza8bhhj9a ] Thanks to olboss for this awesome app signer
2) 5 Sec of Your Precious Time
3) Pc/Lappy
Processs/Workingss
1)Download the zip from above mediafire link
2)Make a folder in Desktop
3)Copy/Paste the downloaded zip there...
4)Extract it there...
5)Now you will get a folder name " Sign+_v1.2.2 "
6)Go inside that folder, & Run the " Sign+.exe "
7)A white Popup will came..
8)Now simple drag & drop the desired apk on that white surface, or you can Browse to it.
9)Then click on " signfiles " button.
10)Then Goto that folder where your original files was kept & you will find the signed apk there....
CREDITS :- aguha1044
Don't Forget To Hit Thanks........ :good: :good:
Hello all , i post my new guide to change icons without using apktool . This guide is for newbies though other all advance developer may think this useless or may be they known this a very ago.
# Note :-
1) This guide is for all newbies who want to edit there app icons , but dont have apktool or have no knowledge about it .
2) This guide is only applicable for system apps .
3) You should have knoweledge for flashing zips by CWM .
# What is needed ?
1) A must have computer with paint (opptional) [ some phones with Zarchiver app can be used . ]
2) WinRar
3) A flashable zip file supplied by other developer .
4) A icon Set which you want to replace with .
# Procedure :-
1) Make a directory called " stock " .
2) Paste your app in it .
3) Below i have taken SystemUI.apk.
4) Rename that app to SystemUI.zip ( just make .apk to .zip format )
5) Then go to options (press right mouse button) press Extract to SystemUI
6) After extracting go to the extracted folder " SystemUI"
7) Browse to res / drawable-mdpi / you will find all icons there . ( In my case its mdpi , it may be hpdi .)
8) Note that the resolution must be same or it may not look good . [ Expiremental ]
9) Replace the icon which you want to from your icon set .
10) Go back to folder where you will find folders like META-INF , res , & files like AndroidManifest.xml , classes.dex, resources.arsc .
11) Now select that all files and press the right button of the mouse ( the options button) .
12) Select the Add to Archive option .
13) Now keep the same name of the app you are modding and select " zip " .
14) A new zip file is created like " SystemUI.zip" . Rename it to SystemUI.apk ( just from .zip to .apk )
15) Now your modded app is ready .
16) Take the flashable zip provided by other developer .
17) open that zip and replace your file with his . ( in folder system/app/ " replace here ." )
18) Save the zip . And Flash it using CWM !!! Enjoy now you can see your modded icons .!!
I will post xml editing guide for newbies afterwards .
So here is the way, how You can create Custom Home Button.
* Softwares you need to do this : (all download links provided below) : :good:
1) 7-Zip File Manager
2) Windows Image Resizer
* Stepwise Guide :
STEP 1 : Get you launcher’s (.apk) file
STEP 2 : Extract it with 7-Zip File Manager
STEP 3 : Open the folder where you have extracted the apk file
STEP 4 : You will find a folder named ‘res’ ; open it and go to ‘res\drawable-hdpi"; open all folders inside 'res' folder and make sure that you have replaced all the stock isons by desired icons.
STEP 5 : You will find your Launcher Icon. Right Click on it, go to Properties and then to Details ; there you will find dimensions of the image. Note them somewhere.
STEP 6 : Now select the desired Icon and resize it using Windows Image Resizer by right clicking and then clicking on ‘Resize Image’.
STEP 7 : Replace the Icon in extracted folder with the same name.
STEP 8 : Repeat the above steps in ‘ res\drawable-sw800dp-hdpi ‘ and ‘ res\drawable-xhdpi ‘ and ‘ res\drawable-xxhdpi ‘ folders.
STEP 9 : After replacing all the icons, come back to the folder and select all files, right click on them and using 7-Zip add them to an archive, when adding into an archive make sure that you (.zip) by (.apk).
STEP 10: Install the launcher or place it in an Custom Rom. ( I would suggest place this launcher in an Custom Rom )
* All Screenshots, Download links and Custom launcher provided below
My Earlier Post Related to this :
http://forum.xda-developers.com/tools/frameworks/apple-home-button-android-devices-4-2-x-t2822146
(Do not forget to Click the Thanks Button) (Please tell me if any problem comes)
Hello friends
today i am going to tell you how you can root your Micromax Nitro 3 E352
So first let me tell you, there are 2 methods of rooting this device.. (i have personally tested it)
1. Using Kingroot
2. Flashing SuperSu
Method 1 : Rooting through Kingroot :-
what you need :-
1. Kingroot Apk (Get it Here : Kingroot App
2. Micromax Nitro 3 Working Device
3. Fast Internet Connection ( 3G/4G)
4. Human Brain
that's all we need , lets get started !
First of all We need to Enable Unknown Sources Installation,
to do this, go to Settings>Security> scroll down a little and enable Unknown Sources
Now Install Kingroot Apk and open it.
Now tap on big blue button (ROOT) and wait for some time...
your device may reboot but you need not to worry..
after 2-3 minutes your device will be rooted..
Enjoy
Method 2 : Flashing SuperSU zip through TWRP :
What we need for this :
1. PC
2. TWRP recovery for E352 ( Get it here : TWRP for Nitro3 )
3. SP Flash Tool ( Google it)
4. Mt6592 Scatter File (View attachment MT6592_Android_scatter.txt
5. Human Brain Only
that's all we need right now.. lets get started
( Note : Before doing anything with your device, make sure you have made a backup of all the apps, contacts and all important things )
1. First of all create a new folder in any drive
2. Copy TWRP.img, Mt6592 Scatter file, to that newly created folder
View attachment 3851620
3. Rename recovery_TWRP.img to recovery.img
View attachment 3851617
5. Open SP flash tool
6. Click on Scatter-Loading
7. Go to the newly created folder and select scatter file.
View attachment 3851626
8. Now make sure that the Recovery row is ticked
View attachment 3851627
9. Now click on Download
View attachment 3851628
10. Switch off Your mobile and Connect it using USB cable
11. Wait for sometime and a Green Circle will appear..
**Done**
You have successfully flashed TWRP on your Micromax Nitro 3 E352.
Now to flash SuperSu file :
download the latest Supersu Zip file.. ( here : SuperSU
download this file and put it in the root of your SD card
Now reboot into recovery ( Power + Vol Up button ) for 5 seconds
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLRU5TRTk5bERWSGM
Now in TWRP tap on Install
Now select the SuperSU zip file
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLMlRPRkJtZnE4aG8
Now Swipe to Confirm flash...
wait 10 seconds it will be flashed..
done...
now reboot !
Congrats ! You have successfully rooted Your MMX Nitro 3 and Installed TWRP 3
hit thanks if it worked for you
commend down if you encountered any problem..
twrp download link not working
Hello sir, please provide me the working download link of twrp for micromax e352, your given link is not working. I badly need the file. You can also share the file in email attachment : [email protected] . Thanks in advance.
Twrp for micromax F666
Sir please make Twrp for my device as it is not available
MICROMAX F666
ANDROID 5.0
MT6582
RAM1GB
KERNEL 3.10.54