Related
[APP/OPEN SOURCE]Screen Standby ♯ Root [2.0]-Screen off while keeping device active
SCREEN STANDBY ♯ ROOT 2.0
TURN OFF SCREEN AND AVOID OVERHEATING PROBLEM FROM PROLONGED STREAMING/GAMING OVER HDMI / MHL | DOWNLOADING DATA OVER WIFI
SAVE YOUR SCREEN AND BATTERY WHILE PHONE IS STILL RUNNING!
OPEN SOURCE!
AUTO SCREEN OFF / ON WITH HDMI CONNECTION / DISCONNECTION
Git Repo: https://github.com/nkahoang/screenstandby
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remote Controller Feature - Public Review
Setting Wizard
Search Plugin
Selectable UI
Outgoing call automator
TURN YOUR SCREEN INTO TOUCHPAD, NO NEED FOR BUYING AN EXTERNAL MOUSE!REMOTE CONTROLLER FEATURE!SCREEN STANDBY IS NOW LIVE ON GOOGLE PLAY STORE!
The app is published under the name "Screen Standby ♯ Root"
VIDEO CLIPS SHOWCASING THE APPS:
SEE NEW FEATURES IN ACTION!
SEE APP IN ACTION! (thanks Doctor.Krouch so much for the awesome clips)
All About Android - Episode 86 with a short review of Screen Standby
XDA TV Review of Screen Standby!
CooLoserTech·Top 10 Best Apps of the week # 171
Click to expand...
Click to collapse
INTRODUCTION
Hi everyone,
This is originally for HTC One X, however, I have ported it to the Galaxy Nexus and now it could work on all devices! (Galaxy S3 / Moto Razr / etc). "Screen Standby" will completely turn off the backlight while keeping the phone running for MHL / HDMI streaming|gaming. That means you can now watch movie / play games on big screen and can still turn off the screen (touch screen still works!).
Click to expand...
Click to collapse
ROOT REQUIRED (Non-root method also available but not as effective & battery saving as root)
FEATURES
- Switch off the screen temporarily without actually putting the phone into 'sleep mode'. The phone is still running! It saves your battery, avoids heating to prolong battery life
- Since 1.96, screen can be optionally turned into touchpad!
- It has a nice little widget that let you quickly turn the screen off from your homescreen
- Since version 1.5 beta 2, shaking your device will temporarily toggle between complete screen off and lowest brightness level (so that you can perform quick action without playing a blind guessing game)
- Non-root method now available with 1.98 Beta 7
- One two dimmer: Turn off screen automatically after an idling time (no user interaction)
- Simple interface
Click to expand...
Click to collapse
WHY?
This little app will temporarily turn off screen backlight, however, unlike putting the phone to sleep, the phone is kept running. It is perfect for keeping the phone from heating from prolonged HDMI streaming over Medialink HD or MHL connection (the screen is off yet image/movie/games continue to be streamed) / or wifi data downloading, etc.
HOW DOES IT WORK?
It attempts to perform various actions (cutting screen voltage / brightness / light switch / writing a blank image to frame buffer, etc)
(Since 1.5, the voltage method is temporarily disabled)
For some devices, the screen may shutter a bit if Automatic Brightness is turned on. However, the app will automatically detect it and put the backlight into sleep again. So if you want to avoid the problem, set Automatic Brightness to false.. Since 1.7, enable auto brightness handling in app setting helps preventing this flickering
HOW TO TURN ON THE SCREEN AGAIN?
+ Click on the app notification on your status bar (since version 1.3) or
+ Simply put the phone into true sleep (short press power button) then turn it on (power button again)
+ Temporarily lid the light a bit by shaking the device (since 1.5b2, enable it in Menu -> Settings)
+ If you can't turn on using any of the above methods, press emergency button (in main app interface) to turn on / or use 2 by 1 widget
Click to expand...
Click to collapse
SCREENSHOTS (Updated for version v1.97)
Installation
Install as normal apk No big deal
Remember, install and use as your own risk, even though I can't think of any damage this little app can cause to your phone
Click to expand...
Click to collapse
Changelogs:
ßeta 2 Changelog:
Add toggable UI: Metro and Android Dark Holo (in Settings -> Extra)
New feature: Outgoing call automator !
First ßeta Changelog:
- New! Setting Wizard to help user quickly and easily set up Screen Standby. Simply select your known-supported device (the list is expanding!
Please help me) and your use-case (Streaming movie / Playing ingress / Playing Youtube etc) and the wizard will automatically select the optimised preset for you!
- New! Screen Standby Search Plugin to help automate Screen Standby from Search key (long press search hardware-key or softkey) or Google Now gesture (swipe up from Home softkey on Jellybean device). The plugin can now open Screen Standby interface, activate / deactivate / toggle screen off or launch Remote Controller
- Added better Root & BusyBox checker and helper
- Added new Tasker intent to control screen standby:
com.nkahoang.screenstandby.action.TOGGLE : to toggle screen on and off automatically
com.nkahoang.screenstandby.action.REMOTE_CONTROL: to launch Remote Control from tasker
- Added new option to broadcast an intent to Tasker when HDMI is detected (go to my app's settings -> HDMI Detection -> Enable broadcast on HDMI Connection/Disconnection. Specify intent action (case-sensitive) for each case. Go to tasker, add New System Event -> Intent Received, type exactly the action intent you provided in Screen Standby). The best part is, HDMI Intent can also be broadcast without activating Screen Standby (yeah, so you can use SS as a HDMI sensor for tasker)
- Added ability to use Remote Controller with Wifi-Direct (if a warning message is shown, just click 'Continue Anyway')
Optimizations:
- Continued optimisation for Nexus 4
- Added wake-lock to One Two Dimmer
- Slightly tuned sensors
From user report:
Normally, with the same amount of time watching movie, battery drain drops from 30% down to just 2%!!!!!!!!!!!
Click to expand...
Click to collapse
Please report bugs / feedbacks / suggestions.
To help me solving your issue faster, since version 1.31, you may want to open the app, hit "Menu" key -> Print debug info. It will then generates a log file containing the required information. Please send that file over pm to me. Thank you
Click to expand...
Click to collapse
Special thanks to:
- ppmeis (helps with S2, now S3 / Transformer and lots of other stuffs)
- winsettr (helps with Galaxy Nexus compatibility and constant reports)
- mnsk (helps with his Sony and Iconia)
- cocatriz (helps with S2)
- TheDarkLux (helps with Galaxy S3)
- evilmtv (helps with problems on GB devices)
Coffee buyers:
Styles Vancleave
- agronick from AppRadio / ARLiberator forum
- jjwatmyself (and also thanks for his mention of my app on his thread)
- jdbaldi
- jhanson
- MichaelMotes
Youtube clip:
- Doctor.Krouch
Click to expand...
Click to collapse
Tutorial: Setup app to work with tasker / Llama
Follow the instruction of this post:
http://forum.xda-developers.com/showpost.php?p=33073452&postcount=92 (Tasker)
http://forum.xda-developers.com/showpost.php?p=33073452&postcount=565 (Llama, thank Buzzthebuzzsaw)
DOWNLOAD
Stable version of app can be downloaded in attachments section on through Google Play Store. In addition, this thread will receive beta / experimental build in the future.
Archived build (1.1 to 1.96) can be downloaded from here
Click to expand...
Click to collapse
I like this great idea
Sent from my SPH-L710 using xda premium
Good idea finally something like this
Sent from my SGH-T989 with Darthstalker
Awesome app. I don't know if this makes sense, but on my Galaxy Nexus the previous version was much quicker to turn the screen off...
Sent from my Galaxy Nexus using Tapatalk 2
OCT 14 2012. App updated.
UI rework + Add notification to quickly turn off screen without put phone into sleep (see screenshot)
winsettr said:
Awesome app. I don't know if this makes sense, but on my Galaxy Nexus the previous version was much quicker to turn the screen off...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
It should be slower the first time you use it only (since now it will manually find screen device for every phone, not hardcoded like before)
Working on TF300T almost perfect. The only "issue" is that when I turn off display, keyboard dock doesn't work (touchpad and usb works but not keyboard).
It doesn't work on my sgs2...I'll try at home with mhl connected and I'll report again. Nice work man. A must have app!
Confirmed it doesn't work on SGS2. It turns brightness at lowest level without standby screen.
Device Info:
Samsung Galaxy S II GT-9100 International
OS Version: 4.0.4 ICS (tested on GB 2.3.6 too)
Awesome app, one thing is that is a bit of a guessing game when trying to select apps and actions inside apps. Could be a tiny bit higher, so we can see at least barely what we are tapping on?
ppmeis said:
Working on TF300T almost perfect. The only "issue" is that when I turn off display, keyboard dock doesn't work (touchpad and usb works but not keyboard).
It doesn't work on my sgs2...I'll try at home with mhl connected and I'll report again. Nice work man. A must have app!
Confirmed it doesn't work on SGS2. It turns brightness at lowest level without standby screen.
Device Info:
Samsung Galaxy S II GT-9100 International
OS Version: 4.0.4 ICS (tested on GB 2.3.6 too)
Click to expand...
Click to collapse
Please download the latest version (1.31) which have print debug info ("Menu" -> "Print debug info") and sends the file it generates over to me. I don't have either of your devices so this may be the only way I can fix that bug.
jgaf said:
Awesome app, one thing is that is a bit of a guessing game when trying to select apps and actions inside apps. Could be a tiny bit higher, so we can see at least barely what we are tapping on?
Click to expand...
Click to collapse
Ugh, i'm not sure what you mean. Can you explain it a bit clearer? If it is possible then I shall implement that.
I think he's asking if you can make it have a little bit of light so he can barely see the screen. When you are using the phone with a TV, you have to guess where to touch the screen.
Perhaps an adjustable brightness setting or just a barely on setting would be helpful for some.
That really defeats the purpose of this app... If you need that functionality, look into Screen Filter or something similar that will lower the brightness but keep the screen on.
Sent from my Galaxy Nexus using Tapatalk 2
How about this:
Pressing the button will now toggle(circle) between three modes:
- Brightness On (app not functioning)
- Lowest brightness possible (but not completely off) and
- Zero brightness (completely turn off screen)
I HAVE BEEN LOOKING FOR THIS.!!!!! THANK U.! LOL
Sent from my PG86100 using xda app-developers app
nightwinn said:
I think he's asking if you can make it have a little bit of light so he can barely see the screen. When you are using the phone with a TV, you have to guess where to touch the screen.
Perhaps an adjustable brightness setting or just a barely on setting would be helpful for some.
Click to expand...
Click to collapse
Yeah this what I meant. Specially when playing games it is very hard, for stuff that can't be mapped into a gamepad
winsettr said:
That really defeats the purpose of this app... If you need that functionality, look into Screen Filter or something similar that will lower the brightness but keep the screen on.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
The thing with screenfilter is that it lowers the brightness on the TV too.
I just had another idea, don't know how complicated it would be to implement though. Would it be possible to add "an always on top or floating button" that would toggle the screen on and off. For example there's an app for exploiting games called Game Guardian, this app has a very small, semi transparent and movable icon that lets you access it from anywhere. This way when we need to open mxplayer and select a movie from our library we can easily turn the lights back on and then turn them off after selecting the video.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
nkahoang said:
Please download the latest version (1.31) which have print debug info ("Menu" -> "Print debug info") and sends the file it generates over to me. I don't have either of your devices so this may be the only way I can fix that bug.
Click to expand...
Click to collapse
Here's the log. I hope it'll help to find the issue.
Hi, i have a I9300 SGS3 and i doenst work.
Here's the debug log.
TheDarkLux said:
Hi, i have a I9300 SGS3 and i doenst work.
Here's the debug log.
Click to expand...
Click to collapse
Your log has nothing inside! Is it because you didn't grant root access to my app? Try uninstall / reinstall and answer "Allow" when superuser/supersu asks you.
ppmeis said:
Here's the log. I hope it'll help to find the issue.
Click to expand...
Click to collapse
Sent you a pm for beta version.
nkahoang said:
Your log has nothing inside! Is it because you didn't grant root access to my app? Try uninstall / reinstall and answer "Allow" when superuser/supersu asks you.
Click to expand...
Click to collapse
It has, i tried uninstall/reinstall now, with same result. Log is empty
It is in my SuperSU app an has root access.
Here the log of SuperSU, because the app is writing anything in the log.
first log:
find /sys/devices -name 'brightness'
exit
sh: <stdin> (1): find: not found
second log:
find /sys/devices
sh: <stdin> (1): find: not found
BIG UPDATE: VERSION 1.4 BETA
+ Now have another way to turn off screen: SET SCREEN VOLTAGE TO ZERO VOLT. With this we have some bonus advantages:
- Much faster turn off time
- No more shuttering with auto brightness!
- Should work with AMOLED Devices (Galaxy S2 / S3 owners, please report!)
However, you should upgrade only if previous version does not work for your devices since this method is still a bit unstable.
Thanks a lot mate, now it works
Confirm working on SGS3.
Bug Report (1):
I have the app VirtualSat.eu to watch tv. When i'm in the app menu, display is off/black (tv still on) when i then select to watch something, the display powers on again.
Bug (2):
after the first operation, i pushed the home button (display powers off again), then scrolled down the notification bar to disable screenOff, it disappears from the notification bar. But display is still off. So i pushed the power button to get to the lock screen (this method is working).
Edit(1)
Tested a bit more, (for bug 2): If i reopen the app an repush on the screen off button (to get the app back in the notification bar), and then tried to reactivate the display, the display powers on for about 2-3 seconds and then again powers off.
For Bug(1): Tried another TV app (Zattoo) there the display stays off if i select a station to watch. So i think it's the app who uses a command that gets the display back on.
But in anyway thanks for your work. Will test with some other apps.
TheDarkLux said:
Yeah thanks a lot mate, now it works Big up
Click to expand...
Click to collapse
Can you test your S3 with MHL as well? I want to make sure that my method guarantees MHL and HDMI works
Finally got my app up and running on the Market and being a die hard xda user, I thought it would only be appropriate to post it here for fellow users to enjoy. =)
IntelliCover is a utility which uses your device’s proximity sensor to control its display and allow fast and efficient access to your phone or tablet.
It turns the screen turns off automatically when you put your device in your pockets, close its flip cover, store the device in a bag, or even just leave the device facing down on a table. As soon as the device is back in your hand the proximity sensor is triggered again, the screen turns back on and your phone is instantly ready for use.
IntelliCover is more feature-filled than any other similar application on the market. And the best part? It's FREE!
Click here to visit the market page and download the app for free
P.S. If you find a bug, I'd appreciate if you could report it to me before giving a bad rating because it usually only takes me less than a day to fix.
*** Features ***
Calibration:-
Proximity Sensor Delay – Add a delay to the time takes to trigger the sensor and turn the screen off.
Application Settings:-
Automatic Unlock – Automatically dismiss the Unlock Screen, provided there is no password. *Experimental*
Disable in Landscape Mode – Disable the proximity sensor when an application is in landscape mode.
Go to Home Screen – Show the home screen when the screen turns on.
Screen Off Only – The screen will turn off but not on when the proximity sensor is triggered.
Screen On Only – The screen will turn on but not off when the proximity sensor is triggered.
Start on Boot – Automatically start the IntelliCover service when the device turns on.
Notifications:-
Proximity Warning – Vibrate every time the proximity sensor is triggered.
Status Bar Notification – Show an ongoing notification in the status bar.
Screen On and Off Actions:-
Airplane Mode – Enable or disable airplane mode.
Auto Rotate (will be removed) – Activate or deactivate.
Auto Sync – Activate or deactivate auto-sync.
Bluetooth – Enable or disable Bluetooth.
Haptic Feedback (will be removed) – Activate or deactivate haptic feedback.
Ringer Mode – Switch ringer mode to Normal (Sound with Vibration), Vibrate or Silent.
Wi-fi – Enable or disable wi-fi.
*** Frequently Asked Questions ***
Q) Is it really free? Where are the ads?
Ans) IntelliCover is completely free and has no ads whatsoever!
Q) Do I require a rooted device to use IntelliCover?
Ans) Nope. IntelliCover works on all supported phones and tablets, rooted or unrooted.
Q) Doesn’t using the proximity sensor consume a lot of battery?
Ans) Actually, the proximity sensor consumes minimal power, almost little enough to be insignificant.
Q) What are the ‘Screen On’ and ‘Screen Off’ actions?
Ans) IntelliCover allows you to set events to be triggered when the screen turn on or off. For example, by setting wi-fi to turn on when your screen turns on and setting it to turn off when the screen turns off, you could save a huge amount of battery power.
Q) Can I request a feature?
Ans) Of course! Head over to the Contact section to drop me an e-mail.
Q) Why does IntelliCover keep running in the background?
Ans) It has to run in the background to know when the proximity sensor is triggered.
Q) Can I donate to the developer?
Ans) Not yet but hopefully I’ll have something set up soon.
*** Permissions Required ***
INTERNET - Required for error logging (to send crash reports)
WAKE_LOCK - Required to unlock screen
WRITE_SETTINGS - Required to toggle ringer mode
VIBRATE - Required to vibrate phone
RECEIVE_BOOT_COMPLETED - Required to detect phone boot
WRITE_SYNC_SETTINGS - Required to toggle autosync
READ_SYNC_SETTINGS - Required to toggle autosync
BLUETOOTH - Required to toggle bluetooth
BLUETOOTH_ADMIN - Required to toggle bluetooth
ACCESS_WIFI_STATE - Required to toggle WiFi
UPDATE_DEVICE_STATS - Required to toggle WiFi
CHANGE_WIFI_STATE - Required to toggle WiFi
*** Contact ***
Feel free to contact me at [email protected] with any issues, bug reports, feature requests, suggestions or queries. Please read the FAQ above before sending an e-mail to avoid redundancy.
Click here to visit the market page and download the app for free
Hello! I love the app! I just installed it, and it works great so far keep up your good work!
Sent from my HTC Sensation Z710e using xda premium
Seems good, some questions though.
1. Is it supposed to be able to turn the screen on? Take phone out of pocket, proximity sensor detects values that indicate there's nothing near (Sorry, dunno how / what values are calculated / used) and viola, screen on?
2. Dunno if I've set it up incorrectly. But, currently, if I turn on my screen, via the power button (Sony Xperia S), the stock lockscreen will show, and either one of two things will happen. Either I unlock it successfully, and the split second I'm completing the unlock, the phone will screen off, and engage the lockscreen - after unlocking this, can I get into my phone. OR it'll do what I've previously mentioned, without input.
timmy-kidd said:
Hello! I love the app! I just installed it, and it works great so far keep up your good work!
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Thanks! Glad you liked it! =)
Profool said:
Seems good, some questions though.
1. Is it supposed to be able to turn the screen on? Take phone out of pocket, proximity sensor detects values that indicate there's nothing near (Sorry, dunno how / what values are calculated / used) and viola, screen on?
2. Dunno if I've set it up incorrectly. But, currently, if I turn on my screen, via the power button (Sony Xperia S), the stock lockscreen will show, and either one of two things will happen. Either I unlock it successfully, and the split second I'm completing the unlock, the phone will screen off, and engage the lockscreen - after unlocking this, can I get into my phone. OR it'll do what I've previously mentioned, without input.
Click to expand...
Click to collapse
Yup, it turns the screen on as well. The values are pretty much just FAR and NEAR for most proximity sensors, so once it detects that there's no object close to it, it should turn the screen on. If it's not turning on at all, that might be the root of the problem i.e. it might be causing the unlock issue as well...Hmmm...I checked out your phone specs and since you said "stock lockscreen", I think it's safe to assume you're on the stock ROM but are you still on Gingerbread? If so, that partially explains the issue. Some Gingerbread ROMs have compatibility issues with the app that are very similar to what you've described, I have no idea why but I'm still looking into it. I had to fix ALOT of Gingerbread issues to get it working this far lol. If you're not on GB though, I guess I need to hunt for an Xperia and begin testing/debuggin. :fingers-crossed:
HUGE update released! V2.0 Hope you all like it. =)
Thanks a lot for sharing your app, it looks grate but unfortunately it is not working with my Galaxy note 10.1
Sent from my GT-N8000 using XDA Premium HD app
I like it! Works fine in my SII stock rom. It will be perfect if i could enable a sound notification when turns off the screen. Not really necessary but cool 4 me (car unlock beep-beep)
Thanks mate!
Frank
thanks for the update
working good.
I'm working on adding a widget and changing the design, but if anyone has any better suggestions, I'd love to hear them because design is not as important as functionality.
Love it. great app, and working fine on both my LG Optimus 3D and Samsung Galaxy Note II.
could we have a choice on the notification icon, would be nice to have a small black dot or something. i just like a empty notification bar but understand the need for it to actually be in the notification bar
thanks
other than that this is my fav ap on my phone
won't this drain battery
mikeschevelle said:
could we have a choice on the notification icon, would be nice to have a small black dot or something. i just like a empty notification bar but understand the need for it to actually be in the notification bar
thanks
other than that this is my fav ap on my phone
Click to expand...
Click to collapse
Yea, it's unfortunate that foregrounding requires the notification icon. You could try using the app without foregrounding, it works for some people. Adding more notification icons should be easy, won't take much time. =) Which ones do you think I should add? A small black dot would disappear on most black status bars (but it'll look like there's an empty space in the status bar so it'll look a little weird)...
skyrocketeer said:
won't this drain battery
Click to expand...
Click to collapse
The proximity sensor uses very little battery and the app itself is pretty light (4-5MB RAM). So far I've only gotten one deep sleep complaint out of 3500+ downloads but no battery issues.
im fine with the black dot, it will keep my bar looking empty
mikeschevelle said:
im fine with the black dot, it will keep my bar looking empty
Click to expand...
Click to collapse
Finally! Found a way to completely remove the icon and the notification from the status bar when the app is foregrounded. It'll be in the next update (today or tomorrow). It can still be enabled manually from the Notifications section but yea, enjoy the emptiness of your status bar. xP
Pretty Huge Update. Hope you like it!
Version 3.0
-Added Screen On Fix for some phones (Enable in settings)
-Status Bar Notification/Icon will no longer automatically show up when app is foregrounded.
-Added Pocket Mode
-Added Table Mode
-Added Widget
-Fixed Screen On/Off Actions bug
One thing I notice (which is NO WHERE CLOSE to a big deal)
The launcher I use (Nova) I hide the status bar and use a gesture to bring it down. When ever Intellicover turns the screen on, the status quickly shows itself and then goes back hidden, not more than a half second of this, but I cannot select anything on the screen until after that status bar thing happens
I like the concept of the app, and it works fine with my sensors. I have one complaint though, I don't like how when the phone screen turns on, it opens to the Intellicover App. Sure I can set it to go to the home screen, but I don't always want that. Once Intellicover is running, I don't want to ever see it again unless I manually launch it from the app drawer. If I have Chrome open and I have to suddenly put my phone down or in my pocket, I'd like to pull my phone back out and have Chrome still be on the screen, just like happens now using the sleep button.
Turns my dumb flip cover on my note 2 into a smart cover. Thanks
Sent from my SPH-L900 using xda premium
garfnodie said:
I like the concept of the app, and it works fine with my sensors. I have one complaint though, I don't like how when the phone screen turns on, it opens to the Intellicover App. Sure I can set it to go to the home screen, but I don't always want that. Once Intellicover is running, I don't want to ever see it again unless I manually launch it from the app drawer. If I have Chrome open and I have to suddenly put my phone down or in my pocket, I'd like to pull my phone back out and have Chrome still be on the screen, just like happens now using the sleep button.
Click to expand...
Click to collapse
Actually, that shouldn't be happening. Once set you never have to see it again. I'm not quite sure what could be triggering this but if you could provide a little information about the OS/phone model/etc. I could try to get a hold on the device and try to replicate the error...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was tired of pressing the power button whenever I need my phone for a second. Thus I created the Gravity Screen Off app which can turn automatically the screen ON when I grab my phone and turn it OFF when I put it into my pocket or onto a table. Basically, no need to touch any button and you are ready to go.
HOW IT WORKS:
The app turns the screen off by monitoring the orientation of the device through the gravity sensor. When your phone is pointing downward by its top, below a certain angle, it's likely to be out of use. In this situation the proximity sensor is activated to determine if it is covered. If yes, the screen turns off because probably you placed the phone into your pocket or onto a table.
The screen turns on when you lift up your phone. The phone wakes up if the proximity sensor is uncovered or if it was not covered the app is looking for movements to detect the action.
The Keep Screen On feature based on screen orientation and motion detection as well. If the device is pointing upward and small movements are detected it's probably held in hand and the screen timeout is extended.
MAIN FEATURES:
- Pocket Sensor: Recognizes if your phone is in your pocket. By turning your phone below the angle you set, it'll prepare to turn the screen off.
- Table Sensor: Detects your phone is lying on a table and turns the screen off.
- Turn Screen On by Motion: If the screen is off and it's facing up the device can be woken up by any movements (ex. lift up by hand) according to the sensitivity set.
- Keep Screen On by Motion: It's a Screebl like feature but it's relying on the small movements you are doing by your hand while holding the phone. If small motions are detected while the screen is facing up the feature keeps the screen on because it can be suspected that the phone is held and probably you are reading something. If the phone is steady the timeout will work as normal in any position you leave your device unlike in another apps.
- Turn Screen On by Proximity: Turns the screen On when you take your phone out from your pocket and Off when you put it back. By swiping your finger over the proximity sensor the phone can be woken up as well.
- Turn Screen Off by Proximity: If the device is pointing downward it takes the proximity sensor into account. By turning this off the program will rely only on the gravity sensor.
- Tasker, Llama, Locale supported by plug-in.
- 3 widgets/shortcuts: (available in Unlocked version)
(i) pause/resume
(ii) turn screen off: It's like pressing the power button
(iii) turn screen off persistently: turn screen off and keep it off until power button is pressed. It's good when you have to keep the phone in your hand or while driving and do not want the screen turned on by the app. After pressing the power button it will work as before.
- Power Toggles plug-ins
BATTERY USAGE:
You can set the app to minimize the energy consumed by the screen and by this you can extend your battery life. Or you can extend your own life by using another features of the app In the first case the battery usage should be not significant. I experienced about 7 per cent extra consumption on the test device. However it can be higher if you are activating often the Turn Screen On by Motion feature by leaving your device face up on table and you set a relatively long timeout for the feature. Read FAQ [4] for more details.
IMPORTANT
On some devices if it's lying face down the alarm clock is switched off by the app after it had gone off! Please check if it's the case for you. If, yes, use a third party app, for example: https://play.google.com/store/apps/details?id=com.vp.alarmClockPlusDock
DOWNLOAD
Gravity Screen
NOTE
Probably not all feature will work for everyone. It was tested so far mainly on Samsung devices with stock rom. If you think it does not work for you, please read the FAQs below or report your issue in this thread.
REPORT YOUR ISSUE
If you have an issue, do NOT post it until you read the FAQ below and try to solve it alone by trying different settings for some hours. If still no solution, please write all your settings in your question otherwise your question will be ignored. If you feel you have a battery drain, do not post it in this thread. We are not speaking about it anymore
VERSIONS: FREE vs. UNLOCKED by IN-APP PURCHASE
In the Unlocked version, there is no 15 minutes limit for turning the screen on by motion and the Table sensor can be set more precisely, plus it has an Exclude App list, a more advanced Delayed lock option and Widgets.
CREDIT
Thanks to @remidesroques and everyone who helped and keep helping the development by testing the beta versions, sending feed backs or any another way supporting this app.
Translations:
Spanish: Johandri Silva and Eduardo Iñiguez
Russian: Gljadkov Oleg
French: @gregland
Italian: @DesmoDavid
Czech: Jaroslav Vrána
Portuguese (Brazilian): Irwing Junqueira Braga
Change log:
- - v2.4.1 - -
Added: Android M support
Fix: Power button support issue when screen turned off during lock screen
Fix: small issues
- - v1.80.1 - -
Added:
- 3 widgets: (available in Unlocked version)
(i) pause/resume
(ii) turn screen off: It's like pressing the power button
(iii) turn screen off persistently: turn screen off and keep it off until power button is pressed. It's good when you have to keep the phone in your hand or while driving and do not want the screen turned on by the app. After pressing the power button it will work as before.
- Power Toggles plug-ins
- Translation: Traditional Chinese, Turkish
- - - v1.78.2 - -
Fix:
- works on LG P880
Added:
- Languages: Arabic, Chinese, Dutch, Hungarian. Thank you for the translations.
- Car dock detection
APKs:
Gravity Screen - FAQ
Hi,
thanks for your feedback.
[1] Q: The screen not always turns off when I put my phone into my pocket, why?
A: The proximity sensor not always accurate. It can fail recognizing some materials specially if they are very close to it. If it happen occasionally, probably it's still worth to use the sensor. But even you can eliminate the accidental turning on by selecting the False Turn On Protection in Pocket option.
[2] Q: The Table Sensor not really works for me when I place my phone onto a table face down, why?
A: This issue is quite common. The first problem is that the free version is limited to 15 degree. If you are turning your phone fast downward the proximity sensor is activated only when it's very close to the table. Many proximity sensors cannot judge distance accurate if the object is too close to it. This is the reason the screen remains on often. And even more the reliability of the sensor depends partly on the material as well. Thus if you are using the free version it's recommended to place your phone onto a table not too fast and try to keep it parallel to it. The paid version allows you to increase the angle and by this the problem is significantly reduced. Moreover, the problem can be reduced by selecting the False Turn On Protection in Pocket option.
[3] Q: Why does the Lying Face Up feature turn the screen off regardless I'm tapping the screen?
A: Due to Android security restrictions a running service cannot detect if the screen was tapped. If you want to continue using the device you have to swipe over the proximity sensor to keep it on or turn it back on.
[4] Q: I'm experiencing high battery usage, why?
A: The app should use about 6 percent extra energy per day if you are not using too much the Turn Screen On by Motion feature. If you frequently lay your phone face up on a table and the Turn Screen On by Motion Timeout is too long, the battery consumption can be much higher. Because the CPU has to be constantly analyzing the data of to acceleration sensor to catch the movement when you lift up the device. Thus if you want to reduce the battery usage it's recommended to keep your phone often lying face down when it's on a table. Because in this situation the proximity sensor is responsible for turning the screen back on which uses much less energy. Moreover, please, keep in mind that the android en-built battery consumption measurement can show much higher results, because it shows the battery usage relatively to another apps. If the phone was not in use or the measurement period was short, it looks like my app uses too much energy however there was not too much energy used all together.
[5] Q: The Keep Screen On by Motion feature does not work for me, why?
A: It can be the result of battery saving processes on your device. Ask for support from the app in this case.
[6] Q: Turn Screen On by Motion feature does not work for me, why?
A: It can be the timeout of the feature is expired, in this case you have to increase it within the app. Or it can be caused by battery saving methods by killing the service of the app. In this case you have to turn off battery saving methods of your device. Please visit: https://dontkillmyapp.com/
[7] Q: The screen turns off in landscape mode, why?
A: This issue has many different solutions. You can make the Pocket Sensor Angle smaller or if you have the Any Direction feature ticket, you can pause the GS app temporally. There are ways to pause it: 1. tick the Landscape mode feature; 2. using the Locale plug-in by Tasker or Llama; 3. using the Menu - Exclude apps option.
[8] Q: It gives me a huuuge wakelok, why?
A: The wakelock is necessary for the "Turn Screen On by Motion" feature but if you turn the screen off through the proximity sensor (i.e. put it into your pocket or place face down onto a table) there won't be wakelock held. So if you want to reduce the wakelock try to keep your phone face down. Moreover, you can limit it by the Timeout scrollbar as well but this means you will loose the feature after the timeout you set.
[9] Q: I'm prompted to type my pass code immediately after screen turns on.
A: You have to enable the Fingerprint, Smart Lock Support option in the app.
[10] Q: It makes a buzzing sound when listening to music and stuff. Can you turn it off?
A: Due to a hardware problem the proximity sensor is causing the buzzing noise on Nexus 4 when it's active.
At the moment I can recommend some changes in the settings. If you turn on the Headset support and connect your headphone, you are able to turn off the "Turn Screen Off by Proximity" and "Turn Screen On by Proximity" features independently from the state when headphone is not connected. The app will remember this and always turn off the proximity sensor when headphone is connected.
[12] Q: Will you add an option to scheduled the app to stop it for night hours?
A: Not really. Please, use the Locale plug-in in Tasker or Llama;
[13] Q: Why my alarm clock does not work?
A: Unfortunately many alarm clocks cancel the alarm when the screen turns off. It can happen if you leave your phone face down at night and my app turns the screen back off when the alarm goes off. The app is trying to detect the alarm event and pause itself, but it's not possible with all alarm clock apps. Thus it's strongly recommended to test your alarm clock with this app.
You can solve this problem by using a well written alarm clock, for example: https://play.google.com/store/apps/details?id=com.amdroidalarmclock.amdroid, https://play.google.com/store/apps/details?id=com.vp.alarmClockPlusDock,
https://play.google.com/store/apps/details?id=ch.bitspin.timely, https://play.google.com/store/apps/details?id=com.amdroidalarmclock.amdroid, https://play.google.com/store/apps/details?id=com.alarmclock.xtreme.free.
[14] Q: The screen turns on during driving. How to avoid it?
A: The simplest method is to pause the app before driving. There are different widgets in the app for this. Or if you are driving often you can use the Power button support feature A more advanced method can be to pause the app when the phone is connected to the car by bluetooth and resumed when disconnected. You can do this by Llama via the Locale plug-in.
[15] Q: The notification not responding/disappearing when I try to pause/resume the app from the notification area, why?
A: Please try to un-tick the NOTIFICATION -> LOW PRIORITY option in the app. It should solve the problem.
[16] Q: What are the shortcuts/ widgets for:
A:
(i) pause/resume
(ii) off: It's like pressing the power button
(iii) persistent off: turn screen off and keep it off until power button is pressed again. It's good when the phone is moving but you do not want it to turn on.
(iv) lock: turns off the screen and locks it. Useful if delayed lock is in use but you want to lock the device manually.
[17] Q: Where is the Pro version? I cannot find it on Play Store.
A: The Pro version is discontinued unfortunately, due to security reasons.
To change to the Unlocked version, please, do the following:
- send me the purchase number of the Pro and I'll send you a promotional code which you can use to unlock the free version
[18] Q: In-App Purchase fails. Why?
A: It's a Play Store app issue probably which happening on some devices.
Please make sure you are connected and restart the device. Other method can be to uninstall the Play Store updates and try with an older version of the Play Store app. It often helps.
[19] Q: I bought the app by IAP but it's still locked. Why?
A: It's a Play Store app issue probably which happening on some devices when not connected to the internet.
Please make sure you are connected and restart the device. Moreover, do you have more than one Google account registered on your device? That can cause the issue too, that you bought the app under a different account. Other method can be to uninstall the Play Store updates and try with an older version of the Play Store app. It often helps.
[20] Q: After some time the phone does not wake up. Why?
A: I'd check any kind of battery saving methods your device may use currently. Probably that disables the sensor after some time.
Moreover, make sure that the Turn screen on by motion timeout is set properly. Please visit: https://dontkillmyapp.com/
[20] Q: I cannot uninstall it. Why?
A: You have to press the uninstall button in the app, not in Play Store or in Android settings. If still no luck reboot your device and try again .
[21] Q: The POWER BUTTON SUPPORT option does not work for me. Why?
A: You have to change the screen timeout from AUTO to another value in Android settings and do a reboot.
[22] Q: The fingerprint sensor does not work, instead I have to type my pin every time. Why?
A: This is an Android thing, for developers the Smart lock features are not supported. That's why we have to use workarounds.
Using the FINGERPRINT UNLOCK, SMART LOCK SUPPORT option should solve the issue but you may have to wait about 5-10 seconds for the complete turning off with the Timeout method.
The Accessibility method is recommended to choose above Android 8.
Root your device to make this workaround perfect. In this case the turning off will be instantaneous.
[23] Q: Why does the screen only turns black but not turning completely off?
A: It's because you have selected the Timeout method of the SMART LOCK SUPPORT option and your device is not rooted. This is an Android thing, for developers the Smart lock features are not supported. That's why we have to use workarounds. Using the SMART LOCK SUPPORT option you have to wait about 5-10 seconds for the complete turning off.
Root your device to make this workaround perfect. In this case the turning off will be instantaneous.
[24] Q: The app is paused when I got a notification from an app which is on the Exclude Apps list. Why?
A: To avoid this issue, you have to grant the app an extra permission in Settings - Notifications - Notification Access
[25] Q: Why the screen timeout is changed by the app?
A: The Keep Screen On by Motion feature extends the timeout always an extra amount of time to keep the screen on when motion is detected. The timeout resets when the screen is turned off.
This method is used only for Xiaomi and Samsung devices above Android Pie.
[26] Q: The app stops working on MIUI (xiaomi redmi) after some minutes. Why?
A: To solve the issue please visit: https://dontkillmyapp.com/
[27] Q: The Turn Screen On features does not work on Samsung S8 or S8+. Why?
A: Luckily there is a very easy and quick fix! You just have to go to the edge light settings on your phone and there you can select which apps are affected by the edge light. So if you turn it off Gravity Screen in this list the notification of the app will get handled by android again, not Samsung's system. So this means that it will turn on the screen again!
Here is a video made to show the bug and how to fix it: https://youtu.be/WSSKvMrx7X0 (Thanks for finding the solution: Kitt3120)
[28] Q: The app stops working on Nokia Oreo. Why?
A: Because of a bug in the power saving method of Nokia devices, background processes are closed even if they are protected.
To overcome this issue you have to do the followings:
In Settings/Apps => Show system apps - deactivate these two packages:
- com.evenwell.powersaving.g3
- com.evenwell.powersaving.g3.overlay.base.s600ww
Please visit: https://dontkillmyapp.com/
[29] Q: The app stops working on Huawei EMUI 8. Why?
A: Because of a bug in the power saving method of Huawei devices, background processes are closed even if they are protected.
To make the app work on EMUI 8 you have to do the following:
Settings --> Battery --> Launch. Find GS there, click on it, open every option (which also includes "Run in background") and let it say "Manage manually".
Please visit: https://dontkillmyapp.com/
[30] Q: The app stops working on Android 9. Why?
A: Because of a bug in the power saving method, background processes are closed even if they are chosen to be not optimized.
To solve this issue you have to grant Gravity Screen access to notifications in: Menu - Permission Control
Please visit: https://dontkillmyapp.com/
TROUBLESHOOT
- make sure the app is installed on internal memory card; external sd cards can cause many kind of problems
- if it looks like the app stopped working correctly do an uninstall, re-install and a reboot
Interesting! Downloading and testing...
Great app, testing it now. For the proximity function, shouldn't the drain be higher because when the phone is in the pocket the proximity sensor is always on?
mliou said:
Great app, testing it now. For the proximity function, shouldn't the drain be higher because when the phone is in the pocket the proximity sensor is always on?
Click to expand...
Click to collapse
Yes, that's right. When it's turned off by proximity, there is no significant drain.
Great app :good: this is exactly what i was looking for :victory:
what benefits offers me the pro version??
Acousticbeatz said:
Great app :good: this is exactly what i was looking for :victory:
what benefits offers me the pro version??
Click to expand...
Click to collapse
You can live with the free version quite well. But by buying the paid version your life will be easier little bit:
- you can drop your phone face down onto your undone bed and your screen will turn off
- when you wake up and hardly find your phone the screen will turn on automatically at the moment you grab it and no need to find any button
Probably there are more advantages, but I could recall only these at the moment
Some feedback
1- Pocket sensor
*** gravity - can turn off but can't turn on.
*** proximity - can't even turn off
2- Table Sensor
*** gravity - can turn off but can't turn on
*** proximity - working (both face down/up and off/on)
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Request
Keep Screen On by Angle - Sometimes, i didn't hold my phone. Just put on the table in standing position. So, 0-10 degree will off the screen while higher than that will keep the screen on. No need to keep shaking
I'm on Motorola Defy CM7.2 btw. Keep your good work :good:
plexnor said:
You can live with the free version quite well. But by buying the paid version your life will be easier little bit:
- you can drop your phone face down onto your undone bed and your screen will turn off
- when you wake up and hardly find your phone the screen will turn on automatically at the moment you grab it and no need to find any button
Probably there are more advantages, but I could recall only these at the moment
Click to expand...
Click to collapse
sounds good... and already purchased
plexnor said:
Yes, that's right. When it's turned off by proximity, there is no significant drain.
Click to expand...
Click to collapse
Do you mean check the box for "Turn Screen OFF by Proximity" or uncheck the box?
its a really nice app, thank you.
one question:
if i put my galaxy nexus in the pocket, it turns off and then it turns on immediatly.
sometimes it won´t even turn off. if i rotate it in my hand and cover the brightness
sensor it will definitely turn off.
if the galaxy nexus rotates in my pocket (sometimes it is on the side) then it turns
on.
is this a bug or do i have to wrong settings.
thank you
antukubo said:
Some feedback
1- Pocket sensor
*** gravity - can turn off but can't turn on.
*** proximity - can't even turn off
2- Table Sensor
*** gravity - can turn off but can't turn on
*** proximity - working (both face down/up and off/on)
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Request
Keep Screen On by Angle - Sometimes, i didn't hold my phone. Just put on the table in standing position. So, 0-10 degree will off the screen while higher than that will keep the screen on. No need to keep shaking
I'm on Motorola Defy CM7.2 btw. Keep your good work :good:
Click to expand...
Click to collapse
For keeping screen on, try the booster option. That's the only option.
Request: Turn off some settings when it's charging as my phone is flat on a surface and it is quiet annoying when I turn phone on it has a very short display timeout (due to tablet sensor)
antukubo said:
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Click to expand...
Click to collapse
mliou said:
For keeping screen on, try the booster option. That's the only option.
Click to expand...
Click to collapse
Thanks. That trick works! I wonder why i didn't try that before
antukubo said:
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
Click to expand...
Click to collapse
After playing a bit more, found that it is partially working on proximity. When facing down, it works. But while facing up, it is not working. Unless i face it down again, then the screen will turn on by motion.
Now, monitoring the battery usage. Hopefully it will not drink too many juice...
Can upload apk please? Stupid play store won't allow me to install, says incompatible.
Acousticbeatz said:
sounds good... and already purchased
Click to expand...
Click to collapse
It's great, thanks
mliou said:
Do you mean check the box for "Turn Screen OFF by Proximity" or uncheck the box?
Click to expand...
Click to collapse
Yes, I mean keep the "Turn Screen OFF by Proximity" check box checked and after switch off the phone by the proximity sensor. You can do this by placing your phone face down or put it into your pocket when you want to turn the screen off. In this situations the proximity sensor will be activated and the screen will be turned off by it.
an0nym0us_ said:
Can upload apk please? Stupid play store won't allow me to install, says incompatible.
Click to expand...
Click to collapse
Hm, interesting why it doesn't allow you to install it ... I attached the file.
myhrdak said:
its a really nice app, thank you.
one question:
if i put my galaxy nexus in the pocket, it turns off and then it turns on immediatly.
sometimes it won´t even turn off. if i rotate it in my hand and cover the brightness
sensor it will definitely turn off.
if the galaxy nexus rotates in my pocket (sometimes it is on the side) then it turns
on.
is this a bug or do i have to wrong settings.
thank you
Click to expand...
Click to collapse
This is an issue with the proximity sensor. Unfortunately it looks like the sensor on your phone cannot recognize well the material of your trouser. If it happens quite often; the solution is to uncheck the "Turn screen ON by proximity" feature. In this situation when you place your phone into your pocket the screen will turn off and the proximity sensor will be inactive after. You can wake up your device by motion only after this. Downside: it costs more energy.
If the phone is often on its side in your pocket try to increase the pocket sensor angle. If it's still turning on, the only way is too keep your phone not to turn on its side or switch off the "turn screen on by motion" feature and in that case the phone will only turn off automatically which is still not too bad.
This app is so good!! I will report my experience
Automaton Locker
Intelligently sleeps & wakes your device right when you want using various Sensors
Automaton Locker from Automaton Family focuses on Automating your Device by making Locking & Unlocking device Tremendously Simple & Magical.
♥♥ XDA : “Magically” wakes the device right when you want to use it
♥ Designed for Phones, Phablets & Tablets too.
Automaton Locker provides Powers to Control Locking & Unlocking of your device :
♥ Intelligent algorithm to lock & unlock when required
● Gives you ability to use various sensors of your device like Proximity, Light, etc Sensors depending upon which Sensor configuration you choose & very high precision of determining whether to lock / unlock device.
● Instantly locks & unlocks your device just when you want to
● Designed for both Flip Cover & Normal Hand usage.
♥ Too many customization
♥ Lowest battery consumption
● You can skip your lockscreen for instant access to device.
● Keep the screen ON till you lock the screen using Automaton or power key this is great when you need to look at the screen continuously.
● Stops the sensors when you don't need them saving battery
● Tons of Sensor Modes to choose from, variety of features which you would love to use.
Extra Features :
● Ignore App List: Select the app for which my app should stop for preventing accidental lock while playing game & app doesn't disturb during that game
● Invert Ignore App List
● Pocket Timeout
● Night Mode: Select the time & app stops during that time interval
● Calibration: Sensors can be calibrate means you can adjust the value for lock & unlock for better usage & comfort (Only in Pro Version)
● Custom ROM support: Applies special tweaks during first start up
● Plethora of Well Tailored Settings for Customizing the working of App
● Say Time : Tell the time on Unlock
♥ Experience true Automation in Locking & Unlocking your device
Basic uses of app:
● Control Device
● Basic Lock / Unlock of device
● Saves the hardware keys from damage
● Saves battery by instantly locking device instead of pressing any key
● No need to find the unlock/lock hardware key again
● Faster access to device
● Makes you MAGIC MAN
● Keep the screen ON during some work
● Pocket Friendly
● Helps you instantly unlock while driving (Don't try !)
Lot many benefits ...
For more USAGE details refer Tutorial in App.
Please, read FAQ for more information
---------------------------------------------------------
Expires after 31 days of installation.
In order to continue using the app after that period, purchase the Automaton Unlocker, but first make sure you are fully satisfied with it.
I want to thank all the beta testers, especially from the xda-developers forum and the people who took part in the translation project. Without you it would never come out of the beta stage. Thank you!
Join the Community to make Automaton Better
This is thread is for discussing issues & bugs found in Automaton
Report all your queries & discussions here or mail me
Flip Cover, Auto Lock/Unlock, Gestures, S4 Gestures, Sensors, Screen, Save Battery, Automation,Motion (Upcoming), Display, ON/OFF, Calibrate, Hand, Pocket, Shake, Proximity, Magnetic, Fusion, Split, Power
XDA:DevDB Information
Automaton Locker, a App for the Samsung Galaxy S III I9300
Contributors
Akshay (Aky), TheWayOfTheAce, sordna, Ravi Jani
Version Information
Status: Stable
Current Stable Version: 3.90
Stable Release Date: 2014-02-01
Created 2013-10-27
Last Updated 2014-02-01
Downloads
Download
Automaton Locker Trial (Free)
OR
Click here to download from PLAY STORE
Automaton Unlocker (Removes Trial)
Consider, paying me a buck for my development by buying the unlocker
OR
Click here to download PRO from PLAY STORE
If you don't have Play Store in your region download the below attachment. But, it is recommended to always download from Play Store
Click here to download Automaton Locker from XDA
Reserved
Changelog
Code:
v3.90
-Improved Call handling
-Improvements to Tutorial
-Misc bugs fixed
v3.80
-Holo dark theme set to Sensor Mode dialog
-German translation improvements
-Few bugs fixed
v3.71
-Quick Fix for Sensor Card Dialog
v3.70
-Increased Trial period to 31 days
-Dutch Translation added
-Backup apps can now backup data of Automaton
-New trial checking method
-Tweaked the text display of Sensor Mode dialog
-Bug fixes
v3.60
-New Card styled Sensor Mode dialog
-New Flip Cover: Magnet & Light mode added
-Removes Trial perfectly
-Auto Smartness FCs fixed
-UI improvements for 7 inch Tablet users
-Settings UI improved
-Updated Tutorial
-Updated Strings
-Updated Credits
v3.50
-New Shake Algorithm with less memory consumption & better results
-New Shake Calibration added
-Changed looks according to Android KitKat theme guidelines
-Changed Switch Style to Jelly Bean Switch Style
-Removed the un-neccessary clear framework data dialog
-Added XXXHDPI icon
v3.00
-Change: Completely new Pocket Proximity Mode
-Change: Completely new Pocket Delay, now saves battery too
-Auto Smartness completely integrated
-New: Shortcut for Locking Device added
-Resized Night Mode icon
-Updated Tutorial
-Updated Strings
-Fixed: No Call Interference working even though turned OFF
-German Translation improved, Thanks to Marc Napitupulu
-Small tweaks to Device Administrator Receiver
-Small memory improvements
-Bug fixes & improvements
v2.80
-Compatible with Android KitKat
-Tweaks to call detection
-UI improvements on Tablet
-Bug: Automaton not starting on boot fixed
-Improper strings in settings fixed
-Translation improvements & fixes
v2.74
-Bug: Showing expired dialog even after unlocking fixed
-Bug: Split sensor mode not working fixed
-Update: Added recheck to hit for few Proximity related Sensor modes
-Strings improved
v2.70
-Harcoded Trail Removed (Now app expires after 14 days of use)
-New Sensor Mode Preference
-Update: Faster Sensor Monitor
-Say Time improper greeting fixed
-Unused Auto Shut Down feature removed
v2.65
-Update: Disable Automaton improved
-Update: Much faster root access
-Update: Night Mode unticking itself fixed
-New icon by Marc Napitupulu
-Improved strings, Thanks again to Sordna
Reserved
One more reservation
Subscribed! Don't want to miss any developments regarding this fantastic app!
I'll always give my best to make this more & more better
Sent from my GT-I9300 using XDA Premium 4 mobile app
Automaton Locker v2.65 now available to download
v2.65
Update: Disable Automaton improved
Update: Much faster root access
Update: Night Mode unticking itself fixed
New icon by +Marc Napitupulu*
Improved strings, Thanks again to Sordna
I'll upload the the apk here soon
Sent from my GT-I9300 using XDA Premium 4 mobile app
Automaton Locker v2.70 released will be available to download from Play Store in few hours
Note : Don't forget to update Unlocker to remove the Trial
v2.70
-Harcoded Trail Removed (Now app expires after 14 days of use)
-New Sensor Mode Preference
-Update: Faster Sensor Monitor
-Say Time improper greeting fixed
-Unused Auto Shut Down feature removed
APK uploaded
First off, brilliant app. I feel functionality such as this should be standard in all smart phones. And if I may, I'd like to give some feedback and make a few suggestions.
UI:
1) I think the three quick toggles in the main view should rather be in a vertical layout, instead of a scrollable horizontal layout. It might look better than having the last toggle (Start Landscape Disable) cropped off.
2) Consider one of the following two options regarding "Sensor Data":
2a) Add the raw sensor data for each sensor to its respective dialog. The string "Sensor Data" implies actual input data from the sensor. I think this would be pretty cool anyway.
2b) Rename to "Sensor Information". Currently, the dialog only provides information regarding the sensor, eg brand, resolution, power, etc, and no data.
3) The text of the last option in the "Sensor Mode" selection list (Fuse + Split:.... Editor's Choice) is slightly cropped off, and the radio button isn't visible. I guess this is due to the images added - which looks nice btw.
4) This is pure personal preference, but I would rather use the android holo style blue as the in-app theme (or provide an option to change it). I understand that the orange is to match the app icon. However, this is really not important.
Bugs:
For the record, the sensor mode I'm using is the editor's choice (Proximity + Shake|Proximity), where proximity locks only, and shake|proximity unlocks only.
1) I've set the "Screen Lock Delay" to 3s. Now I've noticed that if I quickly swipe over the sensor, for example in 0.5s, the device will still lock after 3s. This is infuriatingly annoying. I frequently place my phone flat on a surface and work on it from there, and if I accidentally block the sensor it will lock. This also sometimes causes great confusion when unlocking. Eg, when I take my phone out of my pocket it will unlock correctly, but most of the time it will lock again immediately due to something that blocked the sensor again. I would suggest fixing this by checking after 3s if the sensor is still blocked, and only then should the device actually lock. If the described behavior is intended, then please consider adding what I just suggested as a fix.
2) This is a weird one. Whenever I use any sensor mode with the proximity sensor (proximity only, proximity fuse, proximity split, any of them), I get noise over my headphones. I don't know how exactly to describe it, but it sounds like a rapid ticking sound. I've tried combinations of all the other settings in the app, but the only thing that causes this noise is when the proximity sensor is used. Upon further testing, I've found that the noise occurs whenever the phone does something, and for exactly 4s after that operation. For instance, if I press any of the soft keys like the back button, the ticking noise will be audible for 4s. Tapping on a blank area of the screen, or scrolling has no effect. However if I launch an app, or tap a button, the noise would be there and would stop after 4s. Now, this might seem stupid and insignificant, but what is driving me crazy is the fact that when I listen to music, this noise would go on constantly, until I've stopped music playback. The volume setting (and volume button) has no effect on the noise, as I've played music with muted volume and still get the noise. I have a Nexus 4, stock ROM, rooted and SGS4 (4pin) headphones.
The rest of the app is stunning. Great job!
TheModDoctor said:
First off, brilliant app. I feel functionality such as this should be standard in all smart phones. And if I may, I'd like to give some feedback and make a few suggestions.
UI:
1) I think the three quick toggles in the main view should rather be in a vertical layout, instead of a scrollable horizontal layout. It might look better than having the last toggle (Start Landscape Disable) cropped off.
2) Consider one of the following two options regarding "Sensor Data":
2a) Add the raw sensor data for each sensor to its respective dialog. The string "Sensor Data" implies actual input data from the sensor. I think this would be pretty cool anyway.
2b) Rename to "Sensor Information". Currently, the dialog only provides information regarding the sensor, eg brand, resolution, power, etc, and no data.
3) The text of the last option in the "Sensor Mode" selection list (Fuse + Split:.... Editor's Choice) is slightly cropped off, and the radio button isn't visible. I guess this is due to the images added - which looks nice btw.
4) This is pure personal preference, but I would rather use the android holo style blue as the in-app theme (or provide an option to change it). I understand that the orange is to match the app icon. However, this is really not important.
Bugs:
For the record, the sensor mode I'm using is the editor's choice (Proximity + Shake|Proximity), where proximity locks only, and shake|proximity unlocks only.
1) I've set the "Screen Lock Delay" to 3s. Now I've noticed that if I quickly swipe over the sensor, for example in 0.5s, the device will still lock after 3s. This is infuriatingly annoying. I frequently place my phone flat on a surface and work on it from there, and if I accidentally block the sensor it will lock. This also sometimes causes great confusion when unlocking. Eg, when I take my phone out of my pocket it will unlock correctly, but most of the time it will lock again immediately due to something that blocked the sensor again. I would suggest fixing this by checking after 3s if the sensor is still blocked, and only then should the device actually lock. If the described behavior is intended, then please consider adding what I just suggested as a fix.
2) This is a weird one. Whenever I use any sensor mode with the proximity sensor (proximity only, proximity fuse, proximity split, any of them), I get noise over my headphones. I don't know how exactly to describe it, but it sounds like a rapid ticking sound. I've tried combinations of all the other settings in the app, but the only thing that causes this noise is when the proximity sensor is used. Upon further testing, I've found that the noise occurs whenever the phone does something, and for exactly 4s after that operation. For instance, if I press any of the soft keys like the back button, the ticking noise will be audible for 4s. Tapping on a blank area of the screen, or scrolling has no effect. However if I launch an app, or tap a button, the noise would be there and would stop after 4s. Now, this might seem stupid and insignificant, but what is driving me crazy is the fact that when I listen to music, this noise would go on constantly, until I've stopped music playback. The volume setting (and volume button) has no effect on the noise, as I've played music with muted volume and still get the noise. I have a Nexus 4, stock ROM, rooted and SGS4 (4pin) headphones.
The rest of the app is stunning. Great job!
Click to expand...
Click to collapse
Thanks friend for such an awesome detailed description of the app.
I was glad to read it.
I'll make the changes effectively except the theme changes would be hard because I'm in love with the new looks.
I've been hearing that ticking sound issue when headphones plugged for Nexus 4 because other devices aren't facing it.
Can you check out if other apps using Proximity sensor give this issue?
No other sensor is checked again except Proximity sensor because when compared with other sensor it is accidently hit.
I'll check why it doesn't work when using Proximity + Shake|Proximity
Thanks for the review. I hope you rate the app on Play Store.
Sent from my GT-I9300 using XDA Premium 4 mobile app
I have experienced high battery usage on ARHD 31 and matching firmware with latest update.. Can you suggest the best setting for HTC One with flip cover used to lock and unlock?
The proximity sensor runs constantly..
Thanks in advance..
Sent from my HTC One using XDA Premium 4 mobile app
Automaton Locker v2.74 uploaded & will be available to download from Play Store in few hours
v2.74
-Bug: Showing expired dialog even after unlocking fixed
-Bug: Split sensor mode not working fixed
-Update: Added recheck to hit for few Proximity related Sensor modes
-Strings improved
APK for Non-Play Store users uploaded
zapford said:
I have experienced high battery usage on ARHD 31 and matching firmware with latest update.. Can you suggest the best setting for HTC One with flip cover used to lock and unlock?
The proximity sensor runs constantly..
Thanks in advance..
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here are few tips to decrease battery consumption :
1. Try decreasing Unlock Screen Timeout. If 0 unlocks your device then use it only.
2. Try changing the wake lock type in advanced panel. I guess one of the wake lock type should decrease your battery consumption
3. None of the above works then, change advanced unlock to Activity Method or System Method from basic panel.
Sent from my GT-I9300 using XDA Premium 4 mobile app
KUDOS to the Developer. Its Awesome and Tested on nearly 5 Devices without any problem whatsoever.
Nexus 4, Gionee Elife E6, Htc One, Galaxy S3 and Galaxy Note 2.
Cover the Proximity sensor with a Finger and Shake. The Phones Lock.
Now slide your hand from left to right over the Proximity Sensor, and the devices Unlock.
Repeated Tests on 5 Devices and Its really awesome.
Sorry Developer, I bought One time , and shared it to my other devices to check whether it really works or not.And It Does.
Respect Your Great Work and let me know If I could be of any help to you Guys.
(Y) The Problem to Hardware Buttons solved for ever for NON-ROOTED Devices.
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
KUDOS to the Developer. Its Awesome and Tested on nearly 5 Devices without any problem whatsoever.
Nexus 4, Gionee Elife E6, Htc One, Galaxy S3 and Galaxy Note 2.
Cover the Proximity sensor with a Finger and Shake. The Phones Lock.
Now slide your hand from left to right over the Proximity Sensor, and the devices Unlock.
Repeated Tests on 5 Devices and Its really awesome.
Sorry Developer, I bought One time , and shared it to my other devices to check whether it really works or not.And It Does.
Respect Your Great Work and let me know If I could be of any help to you Guys.
(Y) The Problem to Hardware Buttons solved for ever for NON-ROOTED Devices.
sunnylovesalman said:
KUDOS to the Developer. Its Awesome and Tested on nearly 5 Devices without any problem whatsoever.
Nexus 4, Gionee Elife E6, Htc One, Galaxy S3 and Galaxy Note 2.
Cover the Proximity sensor with a Finger and Shake. The Phones Lock.
Now slide your hand from left to right over the Proximity Sensor, and the devices Unlock.
Repeated Tests on 5 Devices and Its really awesome.
Sorry Developer, I bought One time , and shared it to my other devices to check whether it really works or not.And It Does.
Respect Your Great Work and let me know If I could be of any help to you Guys.
(Y) The Problem to Hardware Buttons solved for ever for NON-ROOTED Devices.
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
KUDOS to the Developer. Its Awesome and Tested on nearly 5 Devices without any problem whatsoever.
Nexus 4, Gionee Elife E6, Htc One, Galaxy S3 and Galaxy Note 2.
Cover the Proximity sensor with a Finger and Shake. The Phones Lock.
Now slide your hand from left to right over the Proximity Sensor, and the devices Unlock.
Repeated Tests on 5 Devices and Its really awesome.
Sorry Developer, I bought One time , and shared it to my other devices to check whether it really works or not.And It Does.
Respect Your Great Work and let me know If I could be of any help to you Guys.
(Y) The Problem to Hardware Buttons solved for ever for NON-ROOTED Devices.
Click to expand...
Click to collapse
Thanks mate for testing on all the devices.
Even if you purchased only once for all the 5 devices it's okay. You just supported the development.
Just don't forget to rate the app.
Thanks again.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Yeah Surely . Its a Great App.
sunnylovesalman said:
Yeah Surely . Its a Great App.
Click to expand...
Click to collapse
Thanks mate
Sent from my GT-I9300 using XDA Premium 4 mobile app
Subscribed. Sounds great, I'm interested
Sent from my Nexus 4 using tapatalk
Akshay (Aky) said:
Thanks mate
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In Setting - Basic Panel - Sensor Function, how do I change the language to English for selecting?
stuartwee said:
In Setting - Basic Panel - Sensor Function, how do I change the language to English for selecting?
Click to expand...
Click to collapse
It should be in English, I'll check that out.
Sent from my GT-I9300 using XDA Premium 4 mobile app
*** App is now suspended, since it doesn't work in Tizen 3.0 and this OS has bezel blocking feature itself. Thank you for participation in this project! ***
Hi, I created app "ScreenLock Gear", because I want to monitor my sleep with locked bezel, eliminate turning screen on by my shirt etc. The mission of this thread is to make it comfortable for all of us.
So what is it?
Simple application for screen locking (bezel/screen/button).
Add widget -> Customise -> Tap to lock -> Enjoy locked screen
I uploaded new version (2.0) to Gear store. Description of the new version:
[Widget icons]
- Please see the first image in this post.
[Features]
- Battery friendly - CPU sleeps all the time, big battery saver (there is just listener in background).
- Widget for easy locking and customise settings.
- Supports both - AOD / Display OFF (for AOD is best to set lowest time to unlock).
[New in 2.0]
- Alarm / PIN / Call compatible! It temporary suspends ScreenLock.
- Customisation in widget.
- Unlocking by bezel (right-left-right-left).
- Option to see unlocking pattern progress, including clock and time to unlock.
- HOME button will temporary disable ScreenLock (until next display turn-off)
Again, thanks for the app.
I have not been out in the rain - when I use your app to lock my Gear S3, will it keep logging my walking/hiking/etc? Or does it pause other operations.
I would prefer it you keep it simple but I'm sure others will have requests for more options.
As I wrote elsewhere, when logging walks/hikes, the strap of my hiking pole hits the Back and On buttons and it eventually terminated the logging of my hikes. So this would be a perfect way to prevent accidental touchs of the buttons or screen from changing things.
Again, THANKS.
fred2546 said:
I have not been out in the rain - when I use your app to lock my Gear S3, will it keep logging my walking/hiking/etc? Or does it pause other operations.
Click to expand...
Click to collapse
No, the ScreenLock has no impact to any logging. Because it does simple job: When DISPLAY TURN ON, call DISPLAY TURN OFF. It is like if you set screen timeout to 0.3 sec. So it is only shortening screen timeout, having no negative impact on battery life or influence of logging.
fred2546 said:
I would prefer it you keep it simple but I'm sure others will have requests for more options.
Click to expand...
Click to collapse
Yes, I will add more options, but primary I want to make it more comfortable to unlock.
fred2546 said:
As I wrote elsewhere, when logging walks/hikes, the strap of my hiking pole hits the Back and On buttons and it eventually terminated the logging of my hikes. So this would be a perfect way to prevent accidental touchs of the buttons or screen from changing things.
Click to expand...
Click to collapse
Yes, it can be used, but now only with screen off. S health will continue to log your trip, but you can't see your statistics until you unlock the screen, which is not so comfortable. Maybe only on long hikes. It is in my future plans to enable this app on top of another app.
Thanks for testing
Great idea, I'll give it a run! Thanks for getting this out there
Used it on a 3 mile walk this afternoon. It appears to have worked fine. Shealth still informed me of my statistics at 1, 3 and 3 miles including pace, distance and heart rate. I played with the buttons while walking and the screen stayed dark (there is the brief message "locked") and did not interrupt my hike log. This walk was not as strenuous and steep as the one last week that prematurely ended when the pole straps pressed the wrong buttons. But since I was pressing randomly, it stayed locked.
I was easy to UNlock it and then to stop Shealth's logging.
Obviously, with the screen locked I could not see what the email alerts were but that is fine. I don't have to be permanently connected to my email.
Again, THANKS.
Thanks for the app. I've found I light them room up if I hit the watch while in bed. I may see if tasker can lock the watch at a certain time and maybe even unlock it. I don't know how difficult it would be for you but adding those features would be nice additions. Again, great job and THANKS!!
Konvalink, man, this bezel wake up was making my life miserable.
IMO the app works perfectly, no bells and whistles, just shuts the thing down.
So many thanks, also on behalf of my wife who was about to file.
Love ya man
Brilliant!
Brilliant idea! Thanks.
Thank you very much for this app. Maybe you can add the the back button for lock also.
I've been using this app every night for the past several days. Only issue I have noticed is that when I move my wrist, the watchface will show for 1/2 a second or less then give the "locked" notice. Overall tho, this works great and I really appreciate you sharing it with us.
Needs Polishing
A very essential app. THANK YOU! for sharing
Observations:
1. Hotspots are visible on the AOD screen
2. Momentary "screen on " before showing number of unlock tries
3. Delay in unlocking when a notification is active
Please continue the good work. Again, thank you.
konvalink said:
- It is not compatible with PIN protection - too hard to unlock screen
Click to expand...
Click to collapse
Can you please clarify? Can't I use your app if I need Pin also? I use Samsung Pay, so it's mandatory to have pin protection.
Ljusalfheim said:
Can you please clarify? Can't I use your app if I need Pin also? I use Samsung Pay, so it's mandatory to have pin protection.
Click to expand...
Click to collapse
The problem is, when PIN protection is enabled, I'm not able to monitor keys or run my app, since PIN protection is killing everything because of safety reasons.
But you can use it. Locking will work. Only unlock will be harder, because app has no chance to monitor BACK key for exit. I will try to solve it somehow, but now, this unlocking would work with PIN enabled:
- Press HOME several times. This will minimise ScreenLock app, so you can write your pin.
- Then you will see black screen, press BACK several times. Otherwise the ScreenLock will start on another SCREEN ON event.
So it's not comfortable yet, but it works.
So it's not comfortable yet, but it works.
Click to expand...
Click to collapse
Thanks, amigo, will wait for updates! Keep up the great work!
i just cant find it. tried a lot of times. may i get a link? thank you
konvalink said:
Hi, I created app "ScreenLock Gear", because I want to monitor my sleep with locked bezel, eliminate turning screen on by my shirt etc. The mission of this thread is to make it comfortable for all of us.
So what is it?
Simple application for screen locking (bezel/screen/button).
Add widget -> Tap to lock -> Enjoy locked screen -> Press BACK quickly several time to unlock.
Or set this app for HOME double-click.
[Features]
- Widget for easy locking
- Supports both - AOD / Display OFF
- Battery friendly - there is just listener in background, so CPU sleeps all the time
- Counter of locks
[Notes]
- This is alpha version, so please try it and comment your ideas
- It is not compatible with PIN protection - too hard to unlock screen
- To explain the unlock pattern - you have to press the BACK three times in sequence of time 0.1 to 0.3 sec between every press. Because if I let here more time, it will delay global locking time.
[Future plans]
- Primary: make unlocking more friendly
- Make user to select different unlocking pattern
- Ability to lock screen on current app (S health)
Click to expand...
Click to collapse
HI again.
i need to have one particular app permanently on screen (Skydive altimeter) during a certain period of gime (approximately 5 min ). It's essential that the bezel doesn't interfere so it would be great if your app could block it but I must see the interface of Skydive altimeter. Is it possible?
Thanks great app.please make time based lock option or lock when detect sleeping
Great app. I got 4 days of working time with AOD in red font.
About unlocking: maybe full 360 bezel movement instead of clicking back button?
Hi,
First off, thanks so much for this app, I don't understand why Samsung didn't put this type of feature directly in the gear... Anyways, I'll test this tonight and see how it goes
However, is it possible for you to add an option page where you can decice how to unlock and if we can show the number of unlock tentatives? On my end, I would prefear if the gear stayed fully off, without showing the number of tentatives.
Thanks!!
More than happy with app
I used the app a few times hiking and find it working very well. It keeps S-health's log going and the underlying S-health app does not prematurely terminate logging of my hike or walk because something (like the straps from my hiking poles) has activated the Home or Back buttons.
And even though I have Samsung Pay activated and have a password/pin your app does not interfere.
THANKS VERY MUCH.