[Q] ReLocked & Stuck At Boot Menu - Android General

​
In an attempt to install cyanogenmod I have got myself in a mess.
The phone is now 'relocked' and stuck at the boot menu:
**** RELOCKED ****
**** Security Warning ****
VILLEC2 PVT SHIP S-ON RL
HBOOT-3.01.0000
RADIO-16.11.20.24_M
OpenDSP-v11.6.0.2235.00.0304
eMMC-boot
Apr 21 2014,21:25:11:-1
FASTBOOT-USB
...
Selecting REBOOT (with no volume key pressed) reboots straight back to this same menu.
REBOOT BOOTLOADER does the same thing.
BOOTLOADER shows the HBOOT menu.
From HBOOT:
RECOVERY reboots to FASTBOOT
FACTORY RESET reboots to FASTBOOT.
While in FASTBOOT I am able to connect via the fastboot command from my PC
$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.01.0000
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid:
(bootloader) product: villec2
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PJ4020000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: low
(bootloader) battery-voltage: 3431mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.485s
But as I'm relocked, I can do much from fastboot.
And, being stuck as the boot menu, ADB is not able to help me.
Is there any thing I can do to recover this phone (HTC One S)?
Thanks for any advice.

Related

Stuck on HTC Logo After S-Off

hey all
I've just got a desire s, but I can't pass the htc logo after trying to s-off the phone.
Enter the bootloader menu and this is all i have
SAGA PVT SHIP S-OFF RL
HBOOT-0.98.0000
RADIO-38.03.02.15_M
eMMC-boot
Mar 10 2011, 14:58:38
any advice? thanks
Flash a custom rom!
Aquous said:
Flash a custom rom!
Click to expand...
Click to collapse
i can't enter the recovery, just a phone with green circle arrows, what should i do?
Cyber_C said:
i can't enter the recovery, just a phone with green circle arrows, what should i do?
Click to expand...
Click to collapse
Install a custom recovery (4ext, cwm,...) in fastboot mode, and then flash a rom from recovery
teadrinker said:
Install a custom recovery (4ext, cwm,...) in fastboot mode, and then flash a rom from recovery
Click to expand...
Click to collapse
not allowed by fastboot, my device can't be detected by adb command, but detected by fastboot command
this is my device status:
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.15_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.32.161.2
(bootloader) serialno: xxxxxxxxxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG88*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3734mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s

[Q] Some things dont work over all of the roms - Firmware??

Hey,
with every ROM I can remember I have a few problems:
1. I cannot change volume when phoning via headset
2. Now every opening of the Camera-App crashes the phone so I manually have to take out the battery.
the Vol-UP + Power button shows me this:
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Mar 2 2012,18:14:34
may it be that I have the wrong firmware or sth like that?
Ph1b said:
Hey,
with every ROM I can remember I have a few problems:
1. I cannot change volume when phoning via headset
2. Now every opening of the Camera-App crashes the phone so I manually have to take out the battery.
the Vol-UP + Power button shows me this:
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Mar 2 2012,18:14:34
may it be that I have the wrong firmware or sth like that?
Click to expand...
Click to collapse
i don't think is firmware related
what recovery do you have?
rzr86 said:
i don't think is firmware related
what recovery do you have?
Click to expand...
Click to collapse
My recovery is 4EXT Recovery Touch v1.0.0.5 RC8. That could cause these problems?
Ph1b said:
My recovery is 4EXT Recovery Touch v1.0.0.5 RC8. That could cause these problems?
Click to expand...
Click to collapse
nope i don't think so
try with changing firmware but i don't think it will help
Damn it. I even installed Revolutionary HD (Sensebased?), updated my Recovery to RC9, but camera just crashes. Yesterday after several tries it worked once.
What firmware should I flash then? Or what could cause the problem anyway?
This is my firmware etc:
Code:
[[email protected] platform-tools]# ./fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: 123456789
(bootloader) imei: 123456789
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3901mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.482s
Ph1b said:
Damn it. I even installed Revolutionary HD (Sensebased?), updated my Recovery to RC9, but camera just crashes. Yesterday after several tries it worked once.
What firmware should I flash then? Or what could cause the problem anyway?
This is my firmware etc:
Code:
[[email protected] platform-tools]# ./fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: 123456789
(bootloader) imei: 123456789
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3901mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.482s
Click to expand...
Click to collapse
flash 3.33 uinversal
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums
but i think it is camera related

[Q] Help with HTC Sensation xe

Help please. I have spent over a week searching and trying to fix my phone but its not good.
I tried turning s-off and somehow the phone wont boot anymore.. Worse still it wont accept any roms at all or let any RUU get past the sending part.
I can boot into fastboot usb but thats all it will let me do.. It was unlocked via htcdev but i have since relocked it somehow an.
The boot loader screen says the following
******relocked***********
****security warning**********
PYRAMID PVT SHIP S-ON RL
HBOOT- 1.29.0000
RADIO-11.24A. 3504. 31_M
OpenADSP-v05.6.0.2226.00.0418
FASTBOOT USB
MAR 2 2012, 18:14:34
The phone is a HTC Sensation Xe
Any help would be appreciated as i have tried so much but still have a dead phone.. Thanks in advance guys and girls..
And yes.. I am a NOOB when it comes to software.. Believe it or not i repair mobiles for cash..But i solder ALOT better than i install roms it would seem..
here are some more details i managed to get
HT235V800066 fastboot
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: HT235V800066
(bootloader) imei: 359614044557754
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3804mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.484s

[Q] Unbrick/back to stock HTC One S, HTC__y13 model.

Ok so my HTC One S went to boot loop during Friday night. I some how managed to get it back to factory setting even though I don't know how because every time I tried to go to factory reset from bootloader phone just went back to bootloop. Well once I got to factory state I of course had lost all my photos which I wanted to recover. So I used this guide http://forum.xda-developers.com/showthread.php?t=1583427 to root my phone in order to recover photos. Well I could not recover photos and my phone went back to bootloop.
At the moment I can't access recovery or factory reset. When I try to access them phone gets stuck on the HTC screen with red text "This build is for development...". I can access bootloader and fastboot/fastboot usb but don't know how to proceed. Any advises?
Phone info:
VLE PUT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.11.50.05.28
OpenSDP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012, 17:10:75:-1
fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23SW404294
(bootloader) imei: 359901041149242
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3721mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
fastboot oem readcid:
(bootloader) cid: HTC__Y13
Phone is both from Finland and I think it is C3 variant but not sure because I can't access settings. Now I am not anymore interested in recovering photos. I just want to get the phone working again. All advises are warmly welcomed.
-Gulthal
put the phone on fast boot mode and run this RUU http://androidruu.com/download.php?...c6c7501d48f34630cc1dfe55665b67ecf9b8869177334 http://androidruu.com/getdownload.p...28_10.27.50.08L_release_301814_signed_2_4.exe
JavierG123 said:
put the phone on fast boot mode and run this RUU
Click to expand...
Click to collapse
Thank you for the info, but when I relocked my boot loader with
Code:
fastboot oem lock
and tried to run that RUU I get the following error from installshield wizard
Code:
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 1 (7601)
IE Version: 9.11.9600.18097
Running it as a admin didn't help.
-Gulthal
Really I don't. Know men. I'm sorry

[Completed] Can't install RUU on bricked HTC One M8s

Hey guys,
So... I've got a little problem. I've got a bricked HTC One M8s and I'm trying to install a RUU which gives me the error 171: "Waiting for Bootloader" (It does restart my phone into fastboot USB). There is currently no OS installed. Fastboot is recognizing my M8s but ADB can't see my phone anymore and most of the time I get the message "Waiting for Device" (used to work). Because I tried to install the RUU I relocked my phone (fastboot oem lock) so TWRP recovery can't load atm.
When I boot into Bootloader I get this information:
*** Software status: Modified ***
*** RELOCKED ***
*** Security Warning ***
M8QL_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
[email protected]
OS-
eMMC-boot 2048MB
Aug 13 2015,20:26:48.0
When I run a fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT53SYS02005
(bootloader) imei: 358031060131300
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__031
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1d456ef7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
I downloaded the RUU and Recovery from this site: ruu.lalleman.net
Could someone help me out how I can fix this problem and get my M8s to work again with a stock Android version?
Thanks!
Hi !
Find the official RUU for your device download website and try again , it should exactly match your device variant
Here is a post which suggests a possible fix https://forum.xda-developers.com/showpost.php?p=68717380&postcount=2
Some more threads specific to your device here https://forum.xda-developers.com/htc-one-m8/one-m8s-general
Good luck !

Categories

Resources