Sorry I am a novice to tablets
I purchased a chinese tablet, when I check 'About Device' it shows below information
Model Number - SdkDemo
Android Version - 2.3.1
Kernel version - 2.6.32.27 [email protected] #222
Build number - rk29_gingerbread_v1.28
sdkDemo-eng 2.3.1 Gingerbread eng.root.20111028.111547 test-keys
revers side it shows - LST M98C201111000319
How will I be able to upgrade the software without knowing the model/brand
Iyer S
root android 2.3.1 sdkdemo rk29_gingerbread_v1.28
iyersb said:
Sorry I am a novice to tablets
I purchased a chinese tablet, when I check 'About Device' it shows below information
Model Number - SdkDemo
Android Version - 2.3.1
Kernel version - 2.6.32.27 [email protected] #222
Build number - rk29_gingerbread_v1.28
sdkDemo-eng 2.3.1 Gingerbread eng.root.20111028.111547 test-keys
revers side it shows - LST M98C201111000319
How will I be able to upgrade the software without knowing the model/brand
Iyer S
Click to expand...
Click to collapse
Hi did you manage to root this tablet cos i have the same specs and i m looking for help on how to root it. thanks
Search for the uberizer on xda ( my thread ) and your tablets will be rooted and the best is....you will safe yourselfs time and worries
Sent from my shooteru using Tapatalk 2
Hello!
I need link for the latest original firmware of tablet model Aoson M98C (CPU Rockchip RK2918).
I break my tablet on accident and now need to reflash its NAND. Can you make backup ROM (update.img) for your table - and send me this firmware rom (update.img or etc.) on email (via PM).
I can assist you if you can't do it alone. It is safe procedure!
So please, anyone that have stock firmware of this device - please contact me via PM.
Please! Thanks in advance!
!ntel said:
Hello!
I need link for the latest original firmware of tablet model Aoson M98C (CPU Rockchip RK2918).
I break my tablet on accident and now need to reflash its NAND. Can you make backup ROM (update.img) for your table - and send me this firmware rom (update.img or etc.) on email (via PM).
I can assist you if you can't do it alone. It is safe procedure!
So please, anyone that have stock firmware of this device - please contact me via PM.
Please! Thanks in advance!
Click to expand...
Click to collapse
Hi, Have you found the rom?
afwong said:
Hi, Have you found the rom?
Click to expand...
Click to collapse
I found the original stock firmware on a nice Russian web site (NICE!): magmid.ru/help.php#1,101 - LuckyStar M98C firmware.
But I still can't flash the tablet. What is the right way to enter the tablet in flash/recovery mode?
I try to hold the trackball button when connect USB cable, then I tried to hold the Menu/Power button, but the result is always the same:
The RK Flash Tool shows Blue square 1 box and when I click restore, it returns error:
Code:
22:25:27 543 <LAYER 2-1-7> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(3782),Sended(0)
22:25:27 543 <LAYER 2-1-7> ERROR:DownloadBoot-->Boot_VendorRequest471 failed,index(0)
22:26:14 486 <LAYER 2-1-7> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(3782),Sended(0)
22:26:14 486 <LAYER 2-1-7> ERROR:DownloadBoot-->Boot_VendorRequest471 failed,index(0)
22:27:48 325 <LAYER 2-1-7> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(3782),Sended(0)
22:27:48 325 <LAYER 2-1-7> ERROR:DownloadBoot-->Boot_VendorRequest471 failed,index(0)
Hello.
I'm french and I have a Lumia820 with RM825_059R178_1232.5957.1308.0001_066.
I have problem with blackscreen when I'm phoning, so I try to flash to GDR2. I install and crack Nokia tools : Product Support Tool and I download last firmware debranding for France : RM825_3047.0000.1328.3002.
I click on Offline --> Programming --> Recovery --> Open product --> rm-825 --> Update list--> Start And I connect my phone.
The flash is OK but when the phone starting, I don't have touch-screen and I'm blocking
I try with oter product code with 3047.0000.xxxx.xxx and ha've the same problem.
Sorry for my English. I hoppe you have a solution for installing GDR2
Hi, I tried with triangle away to convert the custom device status to official, but unsuccessful. Is there any other way to reset it to official again?
Update : with the help of super su pro and triangle away , I have managed to reset device status to official under about device ->status and device status in download mod both. But after complete unroot , the system setting device status back to custom again . Any solution?????
Flash the stock firmware with Odin.
And you will return to Official again.
Sent from my GT-I8160 using Tapatalk 4
Dhiraj said:
Update : with the help of super su pro and triangle away , I have managed to reset device status to official under about device ->status and device status in download mod both. But after complete unroot , the system setting device status back to custom again . Any solution?????
Click to expand...
Click to collapse
I updated my phone's software using smart switch while my device status was custom after updating my phone's software update it was changed to official but I am not able to use secure folder it is showing an error message saying unauthorised software was installed on this device but my device status is official please anyone help ??
Hi everyone!
Sorry to bother you but my sister in lay has a big problem and her XT925…it become a brick over night!!
The phone wasn´t rooted o even had the bootloder unlock!
When we turn on the phone, it loads the Motorola logo and wont continue.
I tried to flash it but can’t make it throw.
We are from Argentina and use Personal as a carrier.
These were the thing I try (all in AP FASTBOOT… Device is LOCK. Status Code 0):
First:
I download a firmware (9.8.2Q-50-XT925_VQLM-20_Personal_AR_SIGNED_S12_USAVANQUPERARLA01F.0R_VANQJBPERARLA_P006_A007_CFC_fb.xml) and use the RSD 6.1.4 but fail. In the phone, had the following error:
“downgrade security version
Update gpt_main version faild
Prefash validation failed for GPT”
Second:
Using the same firmware and RSD, I erase the following line “<step operation="flash" MD5="68b23ea5ffaeb78ee66580697dd07cad" filename="partition_signed" partition="partition"/>” and had a different error:
“invalid image size for partition tz”
Third:
I download a new firmware (XT925_rcica-user-4.4.2-KDA20.117-3-4-release-keys-cid14-RCI-CA.xml”) and try the fastboot.
Got the following error:
“failed to hab check for boot 0x56 preflash validation failed for boot”
(same error using the RSD)
Fourth:
I try to use the motopocalypse but nothing happened…
Can anybody help me? I run out of option!
Thanks!!
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola Droid RAZR HD
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
RAZR HD Q&A, Help & Troubleshooting
Good luck!
Thanks for been so kind!!
Hope someone can help me.
Last night i try to get the unlock code from the motorola page but keep geting "your imput text was not recognized as a valid dataset. please try again" when entering the ID digits!
I´ll keep trying and let you know if a get a different result!
Thanks
Solve!!!!
I load again the page of motorola y was able to get the unlock code!
Once the phone was unlock, I loaded the firmware XT925_rcica-user-4.4.2-KDA20.117-3-4-release-keys-cid14-RCI-CA.xml using fastboot.
Thanks and hope i can help somebody with the same issue!!
Hey guys, first of all: BIG THANKS to all of you (especially UD).
Really appreciate all your hard work.
Unfortunately im stuck in EDL-mode after i installed LineageOS and i dont find a way to get out of it.
My model is A2020U:
What did i do:
Full Backup with EDL-Tool (old version! There are some more options available in the new version.. )
unlocked bootloader with fastboot
installed TWRP + Magisk
installed LineageOS (lineage-16.0-20200512-UNOFFICIAL-pine.zip) & reboot phone --> after reboot the phone does not boot OS and im stuck in EDL-mode. No chance to get into recovery or fastboot
Now i cant find a way to unbrick my phone.. I have tried to restore my Backup, but it does not work. i guess i should have used the newest version of the EDL-Tool to backup all my files..
I also tried to flash GEN_NA_P855A03V1.0.0B11_DL with Miflash --> not working because of :
Code:
[19:03:25 COM20]:MiFlash 2019.12.6.0
[19:03:25 COM20]:flash in thread name:COM20,id:8
[19:03:25 COM20]:need provision
[19:03:25 COM20]:need provision
[19:03:25 COM20]:flash in thread name:COM20,id:8
[19:03:25 COM20]:need provision
[19:03:25 COM20]:[COM20]:start flash.
[19:03:26 COM20]:cannot receive hello packet,MiFlash is trying to reset status!
[19:03:27 COM20]:try to reset status.
[19:03:29 COM20]:write time out try agian 1
[19:03:32 COM20]:write time out try agian 2
[19:03:34 COM20]:write time out try agian 3
[19:03:37 COM20]:write time out try agian 4
[19:03:39 COM20]:write time out try agian 5
[19:03:42 COM20]:write time out try agian 6
[19:03:44 COM20]:write time out try agian 7
[19:03:45 COM20]:error:Timeout bei Schreibvorgang überschritten.
[19:03:45 COM20]:System.Exception: write time out,maybe device was disconnected.
bei XiaoMiFlash.code.Utility.Comm.WritePort(Byte[] send, Int32 offSet, Int32 count)
bei XiaoMiFlash.code.bl.SerialPortDevice.SaharaDownloadProgrammer(Int32 programmertype)
bei XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash() bei XiaoMiFlash.code.Utility.Comm.WritePort(Byte[] send, Int32 offSet, Int32 count)
bei XiaoMiFlash.code.bl.SerialPortDevice.SaharaDownloadProgrammer(Int32 programmertype)
bei XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[19:03:45 COM20]:before restart close COM20
[19:03:45 COM20]:vboy-test err return
[19:03:45 COM20]:flashSuccess False
[19:03:45 COM20]:isFactory False CheckCPUID False
[19:03:45 COM20]:before:flashSuccess is False set IsUpdate:True set IsDone True
[19:03:45 COM20]:after:flashSuccess is False set IsUpdate:false set IsDone true
I also tried to flash it with newest EDL-Tool --> Error:
Code:
ERROR: C:\EDL_TOOL\flash\full\userdata.img - SPARSE image!!!
ERROR: C:\EDL_TOOL\flash\full\vendor.img - SPARSE image!!!
ERROR: C:\EDL_TOOL\flash\full\system.img - SPARSE image!!!
ERROR: C:\EDL_TOOL\flash\full\system_other. img - SPARSE image!!!
Tried on different clients and USB ports.
You guys have any tips for me? May i try to flash a A2020G EDL (eg. A2020G_PRO_V1.6_FULL_EDL.zip) ? Im not really sure about that, because of G/U model difference.
I am really ready to donate some bucks to someone for any useful tips.. Of course i will also provide any more status updates to this case in the future.
-GrayFox
EDIT #1
I used the old version of EDL-Tool to restore my backup-files. Successfully flashed, but my phone is still booting into EDL mode only.
Code:
22:02:20: INFO: {percent files transferred 100.00%}
22:02:20: INFO: ==============================================================
22:02:20: INFO: Files used and their paths
22:02:20: INFO: 1 'C:\EDL_TOOL\logs/port_trace.txt'
22:02:20: INFO: 2 'C:\EDL_TOOL\tools\full.xml'
22:02:20: INFO: 3 'C:\EDL_TOOL\backup\full\xbl.elf'
22:02:20: INFO: 4 'C:\EDL_TOOL\backup\full\xbl_config.elf'
22:02:20: INFO: 5 'C:\EDL_TOOL\backup\full\abl.elf'
22:02:20: INFO: 6 'C:\EDL_TOOL\backup\full\aop.mbn'
22:02:20: INFO: 7 'C:\EDL_TOOL\backup\full\apdp.mbn'
22:02:20: INFO: 8 'C:\EDL_TOOL\backup\full\boot.img'
22:02:20: INFO: 9 'C:\EDL_TOOL\backup\full\BTFM.bin'
22:02:20: INFO: 10 'C:\EDL_TOOL\backup\full\cmnlib.mbn'
22:02:20: INFO: 11 'C:\EDL_TOOL\backup\full\cmnlib64.mbn'
22:02:20: INFO: 12 'C:\EDL_TOOL\backup\full\ddr.img'
22:02:20: INFO: 13 'C:\EDL_TOOL\backup\full\devcfg.mbn'
22:02:20: INFO: 14 'C:\EDL_TOOL\backup\full\dspso.bin'
22:02:20: INFO: 15 'C:\EDL_TOOL\backup\full\dtbo.img'
22:02:20: INFO: 16 'C:\EDL_TOOL\backup\full\dummy_mlvm.img'
22:02:20: INFO: 17 'C:\EDL_TOOL\backup\full\hyp.mbn'
22:02:20: INFO: 18 'C:\EDL_TOOL\backup\full\imagefv.elf'
22:02:20: INFO: 19 'C:\EDL_TOOL\backup\full\km4.mbn'
22:02:20: INFO: 20 'C:\EDL_TOOL\backup\full\logfs_ufs_8mb.bin'
22:02:20: INFO: 21 'C:\EDL_TOOL\backup\full\msadp.mbn'
22:02:20: INFO: 22 'C:\EDL_TOOL\backup\full\NON-HLOS.bin'
22:02:20: INFO: 23 'C:\EDL_TOOL\backup\full\qupv3fw.elf'
22:02:20: INFO: 24 'C:\EDL_TOOL\backup\full\splash.img'
22:02:20: INFO: 25 'C:\EDL_TOOL\backup\full\storsec.mbn'
22:02:20: INFO: 26 'C:\EDL_TOOL\backup\full\system.img'
22:02:20: INFO: 27 'C:\EDL_TOOL\backup\full\tz.mbn'
22:02:20: INFO: 28 'C:\EDL_TOOL\backup\full\uefi_sec.mbn'
22:02:20: INFO: 29 'C:\EDL_TOOL\backup\full\vbmeta.img'
22:02:20: INFO: 30 'C:\EDL_TOOL\backup\full\vendor.img'
22:02:20: INFO: _ (done)
22:02:20: INFO: | |
22:02:20: INFO: __| | ___ _ __ ___
22:02:20: INFO: / _` |/ _ \| '_ \ / _ \
22:02:20: INFO: | (_| | (_) | | | | __/
22:02:20: INFO: \__,_|\___/|_| |_|\___|
22:02:20: INFO: {All Finished Successfully}
22:02:20: INFO: Overall to target 138.828 seconds (37.61 MBps)
22:02:20: INFO: {percent files transferred 100.00%}
EDIT #2
I tried to move my backup-files into the Flash/Full folder. After starting the flash in EDL-Tool this error occurs:
Code:
ERROR: C:\EDL_TOOL\flash\full\rawprogram0.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\rawprogram1.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\rawprogram2.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\rawprogram3.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\rawprogram4.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\rawprogram5.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\patch0.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\patch1.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\patch2.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\patch3.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\patch4.xml - not found !!!
ERROR: C:\EDL_TOOL\flash\full\patch5.xml - not found !!!
I wonder if I can copy these files from GEN_NA_P855A03V1.0.0B11_DL and paste them into my backup?
I managed to flash A2020G_PRO_V1.6_FULL_EDL.zip on Windows 7(!) with miflash_pro_en_4.3.1220.29_setup. My Windows 10 Client cannot receive "hello packet" in Miflash.. I dont know why, drivers are all installed correctly.. if someone comes across something like that: always try different computers / ports / versions of software..
After Miflash finished flashing the A2020G_PRO_V1.6_FULL_EDL.zip my phone was on 0% battery.. I wait until it is fully charged again, then i will try to boot into OS..
I have concerns about the G version because my phone is the A2020U model.. I live in europe, so it wouldn't be a problem for me if I stay with the G version..
Tomorrow I will test all functionalities and describe my experiences. I would love to have LineageOS running on my phone, but i guess i should stay with the Stock ROM with my A2020U model ..
I would rather not like to get stuck in EDL mode again...
EDIT:
Phone booted into OS (v1.6). Now i am looking for a way to get back to A2020U firmware..
Which Version?
GrayFox1950 said:
I managed to flash A2020G_PRO_V1.6_FULL_EDL.zip on Windows 7(!) with miflash_pro_en_4.3.1220.29_setup. My Windows 10 Client cannot receive "hello packet" in Miflash.. I dont know why, drivers are all installed correctly.. if someone comes across something like that: always try different computers / ports / versions of software..
After Miflash finished flashing the A2020G_PRO_V1.6_FULL_EDL.zip my phone was on 0% battery.. I wait until it is fully charged again, then i will try to boot into OS..
I have concerns about the G version because my phone is the A2020U model.. I live in europe, so it wouldn't be a problem for me if I stay with the G version..
Tomorrow I will test all functionalities and describe my experiences. I would love to have LineageOS running on my phone, but i guess i should stay with the Stock ROM with my A2020U model ..
I would rather not like to get stuck in EDL mode again...
EDIT:
Phone booted into OS (v1.6). Now i am looking for a way to get back to A2020U firmware..
Click to expand...
Click to collapse
GrayFox, Which were you initially running Android 9 or 10? Is the GEN_NA_P855A03V1.0.0B11_DL Android 9 or 10?
I currently have a new out of the box A2020U running the Stock Android 10 ROM. I could upload the backup created by the EDL tool for you. If that would help. Frankly I'm looking for a way to revert it to Android 9. I'm not a fan of v10.
karlnorth said:
GrayFox, Which were you initially running Android 9 or 10? Is the GEN_NA_P855A03V1.0.0B11_DL Android 9 or 10?
I currently have a new out of the box A2020U running the Stock Android 10 ROM. I could upload the backup created by the EDL tool for you. If that would help. Frankly I'm looking for a way to revert it to Android 9. I'm not a fan of v10.
Click to expand...
Click to collapse
@karlnorth i was initially running Android 9. The GEN_NA_P855A03V1.0.0B11_DL is Android 9. Thanks for being helpful, but i dont need the Stock Android 10 A2020U EDL-Backup. I'm not a fan of v10 either. Currently I'm running the GEN_EU_EEA_A2020G_Pro_V1.8 on my A2020U. It works great with root and Magisk, no problems with Modem or other things. Are you running the v2.07? There is a roll back package available on easy-firmware. You could downgrade to v1.13 (Android 9).
GrayFox1950 said:
@karlnorth i was initially running Android 9. The GEN_NA_P855A03V1.0.0B11_DL is Android 9. Thanks for being helpful, but i dont need the Stock Android 10 A2020U EDL-Backup. I'm not a fan of v10 either. Currently I'm running the GEN_EU_EEA_A2020G_Pro_V1.8 on my A2020U. It works great with root and Magisk, no problems with Modem or other things. Are you running the v2.07? There is a roll back package available on easy-firmware. You could downgrade to v1.13 (Android 9).
Click to expand...
Click to collapse
I have flashed mine back to the EU 1.8 build as well. The phone recognized my SIM but I could not get service. I flashed the Modem.bin from my initial backup and that didn't work either. I'm thinking the problem is that the modem.bin files I have are from Android 10. Other than the ability to use my phone... as an actual phone. It's amazing! Any ideas?
karlnorth said:
I have flashed mine back to the EU 1.8 build as well. The phone recognized my SIM but I could not get service. I flashed the Modem.bin from my initial backup and that didn't work either. I'm thinking the problem is that the modem.bin files I have are from Android 10. Other than the ability to use my phone... as an actual phone. It's amazing! Any ideas?
Click to expand...
Click to collapse
Here is my a2020u b12 full edl backup, https://www.mediafire.com/file/zhlc5y7nkfxhhsa/A2020U_B12_FULL_EDL_FIRMWARE.7z/file , good luck.
@rafyvitto
Thank you so much. Unfortunately I figured out and built a EDL based on 1.11. Either way, thank you for going out of your way to help. That's what we need to do for our fellow members.
karlnorth said:
@rafyvitto
Thank you so much. Unfortunately I figured out and built a EDL based on 1.11. Either way, thank you for going out of your way to help. That's what we need to do for our fellow members.
Click to expand...
Click to collapse
Cool, glad you figured out.
karlnorth said:
@rafyvitto
Thank you so much. Unfortunately I figured out and built a EDL based on 1.11. Either way, thank you for going out of your way to help. That's what we need to do for our fellow members.
Click to expand...
Click to collapse
Could you possibly share how you built it so I can fix my phone, please? I don't really know what's going on with it. I tried unlocking the bootloader and it wasn't working so I was using fastboot to flash the abl and boot and I think I forgot to flash one of them because I was distracted by my toddler and then my phone said it was corrupt. I tried flashing everything under the sun posted on this site via miflash and the tool and nothing worked until I was finally about to give up and the EU 1.6 worked for me. The phone it will acknowledge my sim card but I have no service since I am in the US, and I don't know how to fix that since everything else I flashed resulted in nothing but errors. Please share your secret.
ufo8mymunky said:
Could you possibly share how you built it so I can fix my phone, please? I don't really know what's going on with it. I tried unlocking the bootloader and it wasn't working so I was using fastboot to flash the abl and boot and I think I forgot to flash one of them because I was distracted by my toddler and then my phone said it was corrupt.... Please share your secret.
Click to expand...
Click to collapse
Hi, sorry for the late reply. Did you get your phone working yet? Also, do you want your phone on Android 9 or 10? My EDL is going to be for 9.0. I'm simply not a fan of Android 10 on this device.
karlnorth said:
Hi, sorry for the late reply. Did you get your phone working yet? Also, do you want your phone on Android 9 or 10? My EDL is going to be for 9.0. I'm simply not a fan of Android 10 on this device.
Click to expand...
Click to collapse
i myself am in boot loop tuck from an oppsie while trying to flash a rom where i booted back into recovery (after wiping) because i didnt know about the having to decrypt thing i have the US model to do you have the EDL for 9.0? literally all i really wanted to do is get magisk working for changing the emoji i think im fine with the OS but did wanted to do Lineage . i luckily can boot into bootloader mode and EDL.
hi
Hi
i am stuck in EDL mode with the same devices you have
i tried miflash and this is what happend :
[
1:02:33 AM COM9]:MiFlash 2017.4.25.0
[1:02:33 AM COM9]:[COM9]:start flash.
[1:02:34 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:35 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:36 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:37 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:38 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:39 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:40 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:41 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:42 AM COM9]:try to reset status.
[1:02:42 AM COM9]:Switch mode back
[1:02:42 AM COM9]:cannot receive hello packet,MiFlash is trying to reset status!
[1:02:42 AM COM9]bject reference not set to an instance of an object.
[1:02:42 AM COM9]:flashSuccess False
[1:02:42 AM COM9]:isFactory False CheckCPUID False
[1:02:42 AM COM9]:before:flashSuccess is False set IsUpdate:True set IsDone True
[1:02:42 AM COM9]:after:flashSuccess is False set IsUpdate:false set IsDone true
Click to expand...
Click to collapse
Edl tool :
File analysis: The syntax of the command is incorrect.
Error !!!
!!! Important files missing or detected SPARSE image !!!
in folder: E:\Axon10_EDL_TOOL_v3.2.5\ flash\full
!!! Please read the information in the LOG-file !!!
Click to expand...
Click to collapse
karlnorth said:
Hi, sorry for the late reply. Did you get your phone working yet? Also, do you want your phone on Android 9 or 10? My EDL is going to be for 9.0. I'm simply not a fan of Android 10 on this device.
Click to expand...
Click to collapse
I am on 9 on the European Rom. I have service because I flashed the non_hlos.bin with the tool but I am so sick and tired of the fingerprint scanner not working. I am downloading the rom you posted in the other thread and I will see if that restores my phone to its original NA glory. Thank you.