Database Info

Wireless charger does not interfere with NFC & different types of Qi receivers

Wireless charger third party does not interfere with NFC.
The base plate is 1500milliamps and wall adapter is also 1500milliamps and recieving plate for s4 is 1000 milliamps and actual power recieved by s4 checked by using galaxy charging app is about 640milliamps with about 35% loss.
The s-view cover fits nicely with the recieving plate but is tricky to put back on so be careful and dont break the glass by pressing too hard, adjust the position of the plate and close the cover. the flip case if it remains open slightly then crease the folds by your fingers and keep closed with screen facing down overnight and case wont remain open.
enjoy your wireless charging s-view cover with this third party add on.
see http://www.youtube.com/watch?v=Xz6KBH-eDFk
my original upload avbout the wireless charger and how to insert it for newbies and working with the s-view cover http://www.youtube.com/watch?v=reYUIN_2nho
mods please note making a separate post as the link gets lost in 28 pages and more of the wireless charging cases post and everyone asking same questions again and again. so making separate post for my case and add on which works and all queries are answered in the first post itself.
have a great weeekend and buy this great accessory from where ever you get it but check the milliamps as on ebay there are many with lower output so check base and recieving power carefully.
In my video description i have linked some cheaper options from same seller and seller was kind enough to give discount code listed on my youtube video. PLEASE NOTE I PAID FULL PRICE MYSELF ON PREORDER plus extra for special delivery, so dont blame me if you dont get discount. Thats just a bonus if you get it. I paid full price at launch for the s-view cover as well at £45 in a three store when i got my phone.
edit 30 may 2013: it works fine with NFC tags as well http://www.youtube.com/watch?v=sjcygHXvlQQ please watch out for my new upload on saturday for new receiver and base plate
further edit for new uploads on 30 may 2013:
yes there is a slight reduction for NFC launching difference but in practise it still works. see new upload for difference with and without wireless charging receiver in place and see the signal attenuation yourself and see if the distance is fine for you. http://www.youtube.com/watch?v=DFW7U5W5GIk
also another upload to show that it fits the standard back the phone comes with which is a snugger fit than the s-view case shown in my earlier videos http://www.youtube.com/watch?v=0sk2aXHWn7g
edit 1 june 2013:
here is a new thinner qi wireless charging receiver i bought with another white base unit i bought. see it working http://www.youtube.com/watch?v=n2TCR6mACSs
but new one has NFC interference a lot and NFC very buggy. will upload the NFC interfernce video in a few mins as well and link here but there is a fix to get NFC working, see below for fix as well
edit#2 for 1 june 2013
NFC and wireless charging works through cases http://www.youtube.com/watch?v=QTHgVPqfQ2U
NFC intereference using thinner qi wireless receiver http://www.youtube.com/watch?v=qSrpZym8fYQ see fix for NFC with simple mod everyone can do below in another video
**********edit #2 1 june 2013:***********
simple fix to get NFC working on paper thin Qi wireless charging receiver for samsung galaxy s4 http://www.youtube.com/watch?v=wlXeTs8dgiE
please hit the like button here and on youtube if you like this simple fix and please share the video on your social networks so that others can buy this great accessory too.
**************EDIT 17 june 2013 **************
new youtube uploads for differences between various qi receivers for the samung galaxy s4 even though they might look the same
part 1 http://www.youtube.com/watch?v=2c0KJeLwlUo
part 2 http://www.youtube.com/watch?v=uv5C5vDVxPY
part 3 http://www.youtube.com/watch?v=3KFLFeVgXPs
my qi goody bag with various qi chargers and receivers for the s4 and wireless charging cases for the s3 http://www.youtube.com/watch?v=Ds2laOAwULM
new powerqi model http://www.youtube.com/watch?v=9QVBVUKhg24
larger black qi charger made in china and designed in japan http://www.youtube.com/watch?v=ZbgtQgqWuws
Matte white qi charger http://www.youtube.com/watch?v=hyrTbMHp4S4
***********Edit 24 june 2013**********:
i have now posted videos showing how even though receivers for the s4 look the same outside but they are different on the inside.
see my uploads. copper coil inside vs PCB inside http://www.youtube.com/watch?v=dLcus2Aa4Wg
just linking another video showing no power input difference to s4 using wall charger or computer usb 3 input or computer usb 2 input via qi charger http://www.youtube.com/watch?v=qxsBrBUjWBY
will upload a few more qi videos with new Qi chargers and 4 different receivers built into regular cases and flip cases for the s3 and note2 the coming weekend
*****************edit 28 june 2013 *************
I have now finally got the NFC antenna that i ordered a few weeks ago from china and the NFC antenna works well in combination with wireless charging. No interference with wireless charging as far as i can tell and NFC sensing is better in my subjective opinion. see it working http://www.youtube.com/watch?v=rNrUrzUYa6k
this NFC antenna might be a solution for all those stuck with receivers interfering with NFC, it costs just about £2.50 delivered from china but took a while to come form there.

Only @ 640mA? Why would anyone get this? Am I missing something?
Makes your phone fatter and charging takes 3x longer then the standard 1900mA cable that comes with the phone.

dannyben said:
Only @ 640mA? Why would anyone get this? Am I missing something?
Makes your phone fatter and charging takes 3x longer then the standard 1900mA cable that comes with the phone.
Click to expand...
Click to collapse
Did you even check the wireless qi adapter? I think not.
This adapter does not add to the size of the phone.
Wireless charging is convenient for some and most of us charge the phone overnight, doesn't matter if it is slower.

dannyben said:
Only @ 640mA? Why would anyone get this? Am I missing something?
Makes your phone fatter and charging takes 3x longer then the standard 1900mA cable that comes with the phone.
Click to expand...
Click to collapse
It fits inside my s-view cover. tight fit and tricky to close back but can manage it by changing position of pad slightly by trial and error. so it doesnt increase the size in practical terms if you saw the video.
Yes its a bummer seeing the drop but that is expected in wireless charging. The convenience factor may be useful for people like me. Its not for everyone. But one avoids issues with USB port by repeated connections and disconnections for charging.
The receiver plate is 1000milliamps but base is 1500milliamps. hopefully soon a receiver with 1500milliamps may be available increasing the power available i guess to about 1000milliamps if wastage stays similar.
I am happy with mine. Its up to others to decide if they want wireless charging. My video just gives you the info and its for you to decide whether the accessory is for you. :good:

lambstone said:
Did you even check the wireless qi adapter? I think not.
This adapter does not add to the size of the phone.
Wireless charging is convenient for some and most of us charge the phone overnight, doesn't matter if it is slower.
Click to expand...
Click to collapse
I watched his YouTube. The Sview barely fits (which is fatter to begin with - and then with a buldge.
I'm all for convenience, but you still need to place the phone on a mat, which is plugged in. So you're telling me placing the phone on the mat is more convenient then plugging in the cord that's right there attached to the mat & charges (from empty) FOUR (4) hours quicker?
That's like saying is more convenient to drive 1000 miles then fly because you don't need to wait in a line at the airport. Cool, yes. Convenient, no.
Sent from my SGH-M919 using xda premium

Which reciever are you using? Or are you using the OEM Wireless Charging Cover?

dannyben said:
I watched his YouTube. The Sview barely fits (which is fatter to begin with - and then with a buldge.
I'm all for convenience, but you still need to place the phone on a mat, which is plugged in. So you're telling me placing the phone on the mat is more convenient then plugging in the cord that's right there attached to the mat & charges (from empty) FOUR (4) hours quicker?
That's like saying is more convenient to drive 1000 miles then fly because you don't need to wait in a line at the airport. Cool, yes. Convenient, no.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
the s-view cover fits fine, the flap closes fine after keeping it flat on the cover for a few hours. the bulge is barely noticable even when you look for it. For all practical purposes it is as if it isnt there.
I get your point about faster charging. But this is convenient (without long term issues with your usb ports from repeated plugging in of charger) for people to leave by their bedside or on their desk where they can just grab phone and go and no need to connect or disconnect their usb charger. Even toyota are including wireless chargers now in their newer car releases. This if clubbed with NFC to a suitable car stereo with app mode etc will be useful for using the features of your phone on your car stereo and make your car stereo smarter without spending more on a car stereo having the same custom built apps. Just one use case scenario that springs to mind.
This wireless kit will be useful for people who want to use their own cases rather than original samsung wireless charging case which does not have s-view cover option.
It wont be for everyone but will be fine for many like me.

SoM3_Idi0t said:
Which reciever are you using? Or are you using the OEM Wireless Charging Cover?
Click to expand...
Click to collapse
its shown in the second video link. i bought it from ebay but its available on amazon. the link is given in my video description as well on both the videos. think the white one is cheaper. but supply and demand the price might be different when you check it.

please note that the app called galaxy charging current, the developers have replied in the comments that the app doesnt work on qualcomm SOC so i dont know if it is showing an accurate reading on my SGS4 GT I9505 as it has a snapdragon chip.

Can you please also test NFC functioning with NFC tags ?

fmark said:
Can you please also test NFC functioning with NFC tags ?
Click to expand...
Click to collapse
Nfc works I have shown it on the video where I show NFC interaction between nexus 7 and Samsung galaxy s4. So no reason why they would work with NFC tags

bubblesmoney said:
Nfc works I have shown it on the video where I show NFC interaction between nexus 7 and Samsung galaxy s4. So no reason why they would work with NFC tags
Click to expand...
Click to collapse
I'm not sure it is the same thing. I'd very appreciate if you could test it with NFC tag as well. Thank you!

NFC either works or don't work, if it works for the nexus 7, then a tag will also work.

Are these for sale yet?
Sent from my SCH-I545 using xda app-developers app

Legacystar said:
Are these for sale yet?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Yes of course how do you think I got it. As already mentioned in my video linked in the original post I bought it from eBay. And if you see the video description I have given links for cheaper options from Amazon and eBay and even discount codes WHICH I don't know if they will work as mentioned in the description to my video

bubblesmoney said:
Yes of course how do you think I got it. As already mentioned in my video linked in the original post I bought it from eBay. And if you see the video description I have given links for cheaper options from Amazon and eBay and even discount codes WHICH I don't know if they will work as mentioned in the description to my video
Click to expand...
Click to collapse
May I have the name of the ebay seller??

dacbeth said:
May I have the name of the ebay seller??
Click to expand...
Click to collapse
might be cheaper on Amazon so check on Amazon first for the colour you wish. Go back to the two videos in the first post and see the five links and cut paste them into a browser it will take you to the respective pages on Amazon And eBay. See the video description below the video on YouTube where I have given all the links as o always do for all my videos.

mental sevegaem
dannyben said:
I watched his YouTube. The Sview barely fits (which is fatter to begin with - and then with a buldge.
I'm all for convenience, but you still need to place the phone on a mat, which is plugged in. So you're telling me placing the phone on the mat is more convenient then plugging in the cord that's right there attached to the mat & charges (from empty) FOUR (4) hours quicker?
That's like saying is more convenient to drive 1000 miles then fly because you don't need to wait in a line at the airport. Cool, yes. Convenient, no.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Lol that was funny, thanks.

bubblesmoney said:
Wireless charger third party does not interfere with NFC.
The base plate is 1500milliamps and wall adapter is also 1500milliamps and recieving plate for s4 is 1000 milliamps and actual power recieved by s4 checked by using galaxy charging app is about 640milliamps with about 35% loss.
The s-view cover fits nicely with the recieving plate but is tricky to put back on so be careful and dont break the glass by pressing too hard, adjust the position of the plate and close the cover. the flip case if it remains open slightly then crease the folds by your fingers and keep closed with screen facing down overnight and case wont remain open.
enjoy your wireless charging s-view cover with this third party add on.
see http://www.youtube.com/watch?v=Xz6KBH-eDFk
my original upload avbout the wireless charger and how to insert it for newbies and working with the s-view cover http://www.youtube.com/watch?v=reYUIN_2nho
mods please note making a separate post as the link gets lost in 28 pages and more of the wireless charging cases post and everyone asking same questions again and again. so making separate post for my case and add on which works and all queries are answered in the first post itself.
have a great weeekend and buy this great accessory from where ever you get it but check the milliamps as on ebay there are many with lower output so check base and recieving power carefully.
In my video description i have linked some cheaper options from same seller and seller was kind enough to give discount code listed on my youtube video. PLEASE NOTE I PAID FULL PRICE MYSELF ON PREORDER plus extra for special delivery, so dont blame me if you dont get discount. Thats just a bonus if you get it. I paid full price at launch for the s-view cover as well at £45 in a three store when i got my phone.
Click to expand...
Click to collapse
Thank you, ordered last night and got my 5% refund

dannclose said:
Thank you, ordered last night and got my 5% refund
Click to expand...
Click to collapse
thank you for confirming that you got the 5% discount as promised to be by the seller. I dont know him, so its good to know he gave the discount. how are you finding the product.

Wireless Charging - Current and future options

So, Phonearena has a few articles on how you can get wireless charging on the S4 now, but they involve a third-party wireless receiver (read: back cover) that looks like it adds a considerable amount of thickness to the phone -- far too much to fit into a case not designed for it. The receiver also won't be shipping for another 3-4 weeks. They've also released a charging pad (which doubles as a dock), but it looks goofy and just uses the Qi standard anyway, so there are plenty of options out there for that portion of the charging.
My question is: Are there other available receivers that actually work? eBay (and the like) displays a list of Galaxy S4 receivers (basically a little flat mat that sits on top of the battery and connects to the Qi hubs inside the back cover), but I'm extremely iffy on ordering any electronics from China unless they're proven...and all of the receivers listed are from mainland China. Has anyone given one of them a shot? And if so, are there any that work efficiently and don't cause problems?
I know, for the future, that Samsung has said they will have a wireless hub (mat) and receiver out sometime soon...but they said the same thing about the Galaxy S3, and it was never released. I trust the word of Samsung about as much as I trust the word of the IRS right now.
Anyone with experiences??

I feel the same way about china electronics, but I do have a Metrans brand one on the way I'm thinking sometime this week, I also go in on the indiegogo Monsterwatts receiver which probably wont show up till June.
so far all the info that I've read up in these forums about the receivers is that with just the Receiver the NFC does not work after installation, one guy used a note 2 NFC antenna to get it working. This sounds like too much fumbling to me and I prefer a sounder solution.
the official receiver covers are starting to show up in both white and black colors (black just recently) they cost 50 bucks and as you mentioned add considerable thickness. the cost doesn't bother me as much as the added thickness, which is what's holding me back from buying it.
The route I'm going to take for the time being is to try the receivers, if it works and does not add any bulge to the rear of the phone while disabling NFC, I could live with that.
maybe if they come out with a decent case for the official receiver cover I might get it.

I don't really use NFC anyway (who does), so that's an acceptable option for me. I have two people at work that I actually *would* use NFC stuff with, and we can just send files to each other without it anyway. Since Verizon has been so gracious as to make sure none of the devices on its network (outside of Nexus devices) can use Google Wallet, I really have no other reason to use NFC.

http://forum.xda-developers.com/showthread.php?t=2296301
Need to read thru his post. Yes, while the receiver is from china, the NFC is functional.
I ordered one from the UK and got it shipped to the US. Am I worried its from china? Not really its 20-30 bucks. It would be the last time I lose that amount.
I will agree that eBay has a lot of knock offs but its the chance you take.
I would like to see a Samsung product out as well, but this will have to do until they put something out.
The main reason Im trying it is because Im tired of looking for a desktop charger that I can use the S4 with while its in a case.
Good luck to ya!

that dude's thread confuses me, he shows some youtube video about a Sview case and how it doesn't close flush with the receiver and says you need to press it hard be careful not to crack your screen... after that he lost me.
I just want a thin receiver that I can slip in the rear without the bulge and closing issues, even if NFC is a NO-GO that's fine with me haha.

I purchased this http://www.ebay.com/itm/121111622748?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
The item does work fine, does NFC work I don't know as I never use it but I will try and find out in the near future.
Item was received quickly and "worked" out of the box but the phone would slide off of the touchstone fairly quick, I had modded multiple phones to work with touchstones including my galaxy nexus so I gad these laying around http://www.kjmagnetics.com/proddetail.asp?prod=D401-N52&cat=168
some N52 magnets, and after checking polarities and moving everything around it now works great and holds the phone very securely.
Charge rate looks to be about 800mA peaking at 615mA incoming charge while the phone is on, Average draw while off the charger is about 200mA with same apps running so about 800mA I do not know what it should be giving out but this is more than enough to charge.
Thought people would like to hear about this and am willing to help if necessary.

nice but I am already invested in QI charging pads.
I think that's the trend anyway, I'm surprised there are still an ample supply of touchstone chargers and palm pre back plates still in the market.

galaxy808 said:
nice but I am already invested in QI charging pads.
I think that's the trend anyway, I'm surprised there are still an ample supply of touchstone chargers and palm pre back plates still in the market.
Click to expand...
Click to collapse
They are being supplied by third parties lately. I try and get the originals only though..
I also had a Qi Nexus 4 but I missed the magnetic pull of the pre I had and the galaxy nexus I modded so I did this.
And I can get a proclip for my car and these make amazing car chargers, which is the main reason I purchased the touchstone version.

SoM3_Idi0t said:
http://forum.xda-developers.com/showthread.php?t=2296301
Click to expand...
Click to collapse
That link + this link
http://forum.xda-developers.com/showthread.php?t=2256339
= no need to create a new thread asking the same question!

KryptosXLayer2 said:
That link + this link
http://forum.xda-developers.com/showthread.php?t=2256339
= no need to create a new thread asking the same question!
Click to expand...
Click to collapse
I wouldn't have created a thread if either of those had helped :good:
The first thread is fairly useful...but is very hard to understand. Also, that solution is pretty much only available overseas for some time. My thread is about using this functionality in North America...which is a totally different story. It's possible to order his solution, but it would cost in the neighborhood of like $75 for the receiver alone...much more than any other available solution.
This thread about looking at options and figuring out what they are.

hotleadsingerguy said:
I wouldn't have created a thread if either of those had helped :good:
The first thread is fairly useful...but is very hard to understand. Also, that solution is pretty much only available overseas for some time. My thread is about using this functionality in North America...which is a totally different story. It's possible to order his solution, but it would cost in the neighborhood of like $75 for the receiver alone...much more than any other available solution.
This thread about looking at options and figuring out what they are.
Click to expand...
Click to collapse
I got the cheapest possible solution I could find on eBay and/or other Chinese sites like AliExpress.
The charger, including a 5V 1.5A wall charger cost me just under $30 ad I got the the Qi receiver for $23. Both prices including S&H from China. It took less than two weeks before I received those items. The reason why I choose this solution was because I wanted to keep the S4 as slim as possible, and also be able to use the flip cover. To get it cheap is also a bonus.
The charge rate is at 640ma, and the bulge the Qi receiver is making is not visible. I removed the thin plastic film from the backside of the receiver and shaved off as much plastic from the inside of the plastic cover as I dared. There was a small visible bulge before those small modification. After the modification one can still "sense" the Qi receiver, but it is not visible or make the phone wobbly when lying on its back.
The only downside beside the rather low charging rate from this kit is the poor quality of the wall charger. It gets very hot and the solution should have been replaced with a micro USB port on the charging pad to make it more versatile when it comes to replacing wall chargers. The pad is also made too glossy and has an annoying sound when the charging initiate and a continuos overly bright status light. I removed the internal speaker and also dimmed the light with some standard paper. The kit can be modified with other housing solutions, and I was thinking of maybe install it inside a small paper-book or something that is a more "standard" item on a nightstand I will just have to check how hot the charging plate and/or the S4 gets before I try out any mods like that.
My recommendation is; Get an iQ charging receiver on eBay. The one I got is OK, but I might have chosen the oddly shaped Qi receiver after the reviews I have read. There is also rumours about a v2 of this slimmest receiver available. Probably wise to sit on the fence a bit longer. I would also advise to stay clear of those cheapest T-100 kind of charging pads that you can find everywhere for $25-$40. I would rather get the Nokia DT-910 or the genuine Samsung charging pad (are there two different kinds of those; one with a micro USB input and another with a standard charging plug?) In Norway both those chargers costs around 40-45 British pounds
Here is a few pics of my kit:

The other threads do not claim that they are UK/EU based.
Lots of usefull information in both. Bubbles post was to verify that the NFC works with the receiver he got.
You should probably do some research on your own.
and BTW, the cost to have just the reciever is £16.99. which is 25$ US.
http://lmgtfy.com/?q=£16.99+to+US+Dollar
Your post is a dupe. Sorry. It just is.

Gear 2 / Gear 2 Neo Cradle

Samsung should release is a nice dock stand for these watches. I hated the Galaxy Gear 'photo frame' cradle. I am not very keen on the new 'snap on' cradle for the Gear 2 and Gear 2 Neo.
I do not mind either cradle for occasional data transfer/connection, but for daily charging, why can't they sell the charging cradle they give to retailers to display the watches..
It sits on the counter, you take the watch off and just sit it into the cradle. There is a small magnet inside that pulls your watch into place and keeps it firmly connected to the two charging pins. It's already been designed and manufactured, now just make them in both white and black and offer them for sale. I'll take two.
--

I don't see a power connection to those store docks. Do they have one to charge the watch?

JimSmith94 said:
I don't see a power connection to those store docks. Do they have one to charge the watch?
Click to expand...
Click to collapse
Those do have a charging cord that comes out the back/bottom of the unit. They only have 2 pogo pins, not 5, so they are for charging only. That's how they keep the display watches charged. I checked out on of the units at Best Buy and tried to convince they guy to sell it to me. but he wouldnt/couldnt.

Here is another angle of a retail dock. We obviously don't need the security cord.

I would love to have this to, I pass by the Swedish Samsung office sometimes. I could ask them if they would sell me some
Skickat från min GT-N7100 via Tapatalk

Ehallq said:
I would love to have this to, I pass by the Swedish Samsung office sometimes. I could ask them if they would sell me some
Skickat från min GT-N7100 via Tapatalk
Click to expand...
Click to collapse
That would be great, let us know what you find out.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

Any luck yet?
I have tried the local Samsung store here, that directed me to their call center, that directed me to another call center, that said they are only sent to retailers and sent back to Samsung after...
I really want one of these charging stands for my new Gear 2

possible problem?
So i ran some small magnets over the back of my watch and in the small space that the back has, I think there would need to be four magnets to hold it in a:
+-
-+
configuration, but even after doing it I didn't create the same pull that the store stands do. I have a experiment that I'd like someone to run (I won't be going to a bestbuy for awhile). Go in with your gear 2, and neo, and try to put yours on the store stand. Does the stand attract it the same? I am worried that the stronger magnetism is a store version with an alternative (ferrous) backplate to the watch...
If I'm wrong, then I actually might start designing a stand and placing the pins and magnet in it, print the object and ship it for you guys to enjoy. Also, the base seems a bit shower stall like, I may reduce the footprint and make some design changes.

abjc89 said:
So i ran some small magnets over the back of my watch and in the small space that the back has, I think there would need to be four magnets to hold it in a:
+-
-+
configuration, but even after doing it I didn't create the same pull that the store stands do. I have a experiment that I'd like someone to run (I won't be going to a bestbuy for awhile). Go in with your gear 2, and neo, and try to put yours on the store stand. Does the stand attract it the same? I am worried that the stronger magnetism is a store version with an alternative (ferrous) backplate to the watch...
If I'm wrong, then I actually might start designing a stand and placing the pins and magnet in it, print the object and ship it for you guys to enjoy. Also, the base seems a bit shower stall like, I may reduce the footprint and make some design changes.
Click to expand...
Click to collapse
Its possible they are using rare earth magnets.

I would love to have this to, I pass by the Germany Samsung office sometimes. I could ask them if they would sell me some

Cradles for Gear 2 in Black or White
I have those cradles if someone needs one. In Black or Creamy White. Not sure what the rules are on this forum and don't want to violate the admin rules. Here is what they look like.
Let me know if someone is interested.
Thanks.

I have the cradles
Breach said:
Samsung should release is a nice dock stand for these watches. I hated the Galaxy Gear 'photo frame' cradle. I am not very keen on the new 'snap on' cradle for the Gear 2 and Gear 2 Neo.
I do not mind either cradle for occasional data transfer/connection, but for daily charging, why can't they sell the charging cradle they give to retailers to display the watches..
It sits on the counter, you take the watch off and just sit it into the cradle. There is a small magnet inside that pulls your watch into place and keeps it firmly connected to the two charging pins. It's already been designed and manufactured, now just make them in both white and black and offer them for sale. I'll take two.
--
Click to expand...
Click to collapse
I posted on this thread the pics and the cradles I have for sale. Let me know the quantity you need.
Thanks.

captain1212 said:
I have those cradles if someone needs one. In Black or Creamy White. Not sure what the rules are on this forum and don't want to violate the admin rules. Here is what they look like.
Let me know if someone is interested.
Thanks.
Click to expand...
Click to collapse
Do you still have these?

Cradles
raiu said:
Do you still have these?
Click to expand...
Click to collapse
Yep. in order to be fair to the admin of the forum, I might suggest a search on ebay of: Galaxy Gear 2 / Gear 2 Neo Charging Cradle.
I have not seen them anywhere else.
Enjoy.

captain1212 said:
Yep. in order to be fair to the admin of the forum, I might suggest a search on ebay of: Galaxy Gear 2 / Gear 2 Neo Charging Cradle.
I have not seen them anywhere else.
Enjoy.
Click to expand...
Click to collapse
Not to be rude, but really.. $80? I'll wait for my local best buy to recycle theirs.

Breach said:
Not to be rude, but really.. $80? I'll wait for my local best buy to recycle theirs.
Click to expand...
Click to collapse
I understand what you are saying, but Ebay's fee's are really high. Then add Paypal fees and you can see it adds up quick.
Also the wimpy charger that comes with the Gear 2 is $40 and it's a pain to use.
I know the cradle is not for everyone, but for some like myself it is much more convenient and practical. Plus it is a better way to protect your Gear 2 when not in use.
If you were to order a larger quantity like 10 units I could work a better price.
Thanks for your feedback.

Thank you very much

captain1212 said:
I understand what you are saying, but Ebay's fee's are really high. Then add Paypal fees and you can see it adds up quick.
Also the wimpy charger that comes with the Gear 2 is $40 and it's a pain to use.
I know the cradle is not for everyone, but for some like myself it is much more convenient and practical. Plus it is a better way to protect your Gear 2 when not in use.
If you were to order a larger quantity like 10 units I could work a better price.
Thanks for your feedback.
Click to expand...
Click to collapse
The charger gear 2 is 15$ from samsung. Ebays fees are not that high, nor is paypals. But to each his own. I'll also wait for bb to do something with theirs. Thank you

raiu said:
The charger gear 2 is 15$ from samsung. Ebays fees are not that high, nor is paypals. But to each his own. I'll also wait for bb to do something with theirs. Thank you
Click to expand...
Click to collapse
Looks like the price came down since I last saw it. I just looked and it is $19.99 on Samsung website.
Again, it is not a purchase for everyone but at least it's an additional choice for some.
Thanks again.

captain1212 said:
Looks like the price came down since I last saw it. I just looked and it is $19.99 on Samsung website.
Again, it is not a purchase for everyone but at least it's an additional choice for some.
Thanks again.
Click to expand...
Click to collapse
captain1212, do you still have either of these charging cradles? I would like to buy one from you (preferably the black one if possible).

Samsung Wireless Car Dock

Just noticed the Samsung wireless car dock is now available.
Bonus is it looks like it works with the Samsung s-view case too.
"Supports Galaxy S 4, Galaxy S 5, Galaxy S 6, Galaxy Note 3, and Galaxy Note 4 using Wireless Charging S-View Cover"
Includes 2A USB Car Charger as well..
http://www.amazon.com/dp/B00NT5LDJ0/

Nice Find OP!!!
But...
Yeah... $86... nope.

mp3ster said:
Nice Find OP!!!
But...
Yeah... $86... nope.
Click to expand...
Click to collapse
Exactly what I thought. Maybe if it was 30-40ish.. maybe.

DextarRogue said:
Exactly what I thought. Maybe if it was 30-40ish.. maybe.
Click to expand...
Click to collapse
what? the Samsung wireless dock for home is $50 alone, so how can a wireless car charger that is more functional be cheaper?
it's ok to spend $800 on the phone but $80 is too much for an accessory?

there are a bunch of wireless charging car docks out there, here are 2 that are under $50. they arent samsung branded, but should function close to the same.
http://www.amazon.com/dp/B00IRHQZTI/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2EKG6AMG9E6Q5&coliid=I32ID41KSAL02Z&psc=1
http://www.amazon.com/dp/B00F5XPCSC/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2EKG6AMG9E6Q5&coliid=I7UP7HU6QGQRI

jda2631 said:
there are a bunch of wireless charging car docks out there, here are 2 that are under $50. they arent samsung branded, but should function close to the same.
Click to expand...
Click to collapse
i am aware of that, just like cars.. they all do the same thing get you from point A to B and cost vary depending on the brand..

tft said:
i am aware of that, just like cars.. they all do the same thing get you from point A to B and cost vary depending on the brand..
Click to expand...
Click to collapse
That's not necessarily true. Especially not for car chargers.
You end up moreso paying for the mount itself than its wireless capabilities, and as many people who've bothered trying to use a cheap mount to hold their device will tell you, you don't want a cheaply built mount holding your device while you're driving down a crappy road or going over speed bumps.
Not to mention the differences in effort required to remove the device once it has been placed. Some mounts allow one-handed operations, some require two, and some are best left alone entirely unless you can stop to interact with them.

mp3ster said:
Nice Find OP!!!
But...
Yeah... $86... nope.
Click to expand...
Click to collapse
tft said:
what? the Samsung wireless dock for home is $50 alone, so how can a wireless car charger that is more functional be cheaper?
it's ok to spend $800 on the phone but $80 is too much for an accessory?
Click to expand...
Click to collapse
The price of the phone is irrelevant. The dock is overpriced and doesn't provide even a decent value, the home wireless charger is overpriced too. They could have sold them both for 39.99, made a profit and sold significantly more than they will at the 80-100 price point. Either way, it's nice that there are other options for sub $50!

Poetique said:
That's not necessarily true. Especially not for car chargers.
You end up moreso paying for the mount itself than its wireless capabilities, and as many people who've bothered trying to use a cheap mount to hold their device will tell you, you don't want a cheaply built mount holding your device while you're driving down a crappy road or going over speed bumps.
Not to mention the differences in effort required to remove the device once it has been placed. Some mounts allow one-handed operations, some require two, and some are best left alone entirely unless you can stop to interact with them.
Click to expand...
Click to collapse
I've had my fair share with cheap car mounts, probably gone through 4-5 of those cheap $20 mounts in the past 2 years. so i agree on that part which was kind of my point except i'm not very good with analogies.. i would not pay $50 for the samsung home wireless pad , but i will pay $80 for the samsung car dock, because while it doesn't apply to all things, sometimes you do get what you pay for. the samsung dock just looks a lot better than other options, even if it cost $20-30 more. the last mount i had wouldn't even stick properly to the windshield when the outside temps dropped below 30F..

I bought an airdock last month. Its on backorder. My hopes were it arrives around the s6 launch. And its the same price as the Samsung one

zathus said:
I bought an airdock last month. Its on backorder. My hopes were it arrives around the s6 launch. And its the same price as the Samsung one
Click to expand...
Click to collapse
I seriously considered the hell out of that thing because I REALLY like the design. Also no wireless mount will be able to match it in terms of speed and ease of device placement and removal as well as positioning.
I just really couldn't bring myself to trust my $1000 device on a charger without some sort of "hands" to catch it on the off chance that the grip and magnet fail and allow the device to fall.
The Tylt car charger is the one to beat for that reason alone in my book. It's also a bit cheaper than the AirDock which is nice since it looks like I'm gonna end up buying 3 cases before I decide on one to keep haha.

After a lot of searching I decided to just get this dock. I will have mine wednesday from amazon for 85 bucks. In the past I used Ibolt for my S4 and absolutely loved it. Being that they don't have a specific dock for the S6 I just went with the samsung. Once I get my phone I will take pics and post a little review.

Michowski said:
After a lot of searching I decided to just get this dock. I will have mine wednesday from amazon for 85 bucks. In the past I used Ibolt for my S4 and absolutely loved it. Being that they don't have a specific dock for the S6 I just went with the samsung. Once I get my phone I will take pics and post a little review.
Click to expand...
Click to collapse
i want to get this charger too but i need to be able to use my vent mount base. when you get this can you check for me if the ball on the base is the standard 17mm?

neotekz said:
i want to get this charger too but i need to be able to use my vent mount base. when you get this can you check for me if the ball on the base is the standard 17mm?
Click to expand...
Click to collapse
Ive had this dock for a while now i bought it for my galaxy note edge and i have to say its a good car holder holds tight and im yet to have it fall off the window... knock on wood haha. The charge on it like any other qi charger is slow but it holds well if you are using the maps app or streaming music.
However i just dont like things on my window so i ended up buying a vent mount from a company here in sydney that makes specific mounts to your car. The website is: www.holdmyphone.com.au
And i also bought a garmin gps ball mount for it. Its a little tight but once you get it on there and tighten the nut it doesnt move. Out of site out of mind.
If anyone wanta me to post picks let me know [emoji4]

johnnyb33 said:
Ive had this dock for a while now i bought it for my galaxy note edge and i have to say its a good car holder holds tight and im yet to have it fall off the window... knock on wood haha. The charge on it like any other qi charger is slow but it holds well if you are using the maps app or streaming music.
However i just dont like things on my window so i ended up buying a vent mount from a company here in sydney that makes specific mounts to your car. The website is: www.holdmyphone.com.au
And i also bought a garmin gps ball mount for it. Its a little tight but once you get it on there and tighten the nut it doesnt move. Out of site out of mind.
If anyone wanta me to post picks let me know [emoji4]
Click to expand...
Click to collapse
thanks, if it fits the garmin than it is the standard 17mm ball. Where is the release button for the arm? i cant tell from the amazon pics.

neotekz said:
thanks, if it fits the garmin than it is the standard 17mm ball. Where is the release button for the arm? i cant tell from the amazon pics.
Click to expand...
Click to collapse
Release button is behind the holder its in a convenient spot so you can remove it one handed

anyone used this mount for the S6 yet? will the arms hit any of the buttons?

neotekz said:
anyone used this mount for the S6 yet? will the arms hit any of the buttons?
Click to expand...
Click to collapse
yeah im using it on the s6 nothing touches
you have access to all buttons

zathus said:
I bought an airdock last month. Its on backorder. My hopes were it arrives around the s6 launch. And its the same price as the Samsung one
Click to expand...
Click to collapse
I haven't heard of this. Can you provide a link to it?
Poetique said:
I seriously considered the hell out of that thing because I REALLY like the design. Also no wireless mount will be able to match it in terms of speed and ease of device placement and removal as well as positioning.
I just really couldn't bring myself to trust my $1000 device on a charger without some sort of "hands" to catch it on the off chance that the grip and magnet fail and allow the device to fall.
Click to expand...
Click to collapse
I have used the iMagnet mount with my S4 for the past two years and have never had it just fall off. The magnet is incredibly powerful. The problem with the S6, however, is that I can't put the metal disc in my case without disrupting wireless charging.

Wireless charger recommendations?

I'm looking at this one, http://www.amazon.com/Wireless-Compatible-Blackberry-SlimPWRcard-Qi-enabled/dp/B00DQDE1K8. I'd rather not pay $50 for the Samsung charger. Does anyone have experience with this one, or have any other recommendations?

I have this one, and really like it.
http://www.amazon.com/dp/B00PCAXGX6/ref=twister_B00IXZ5OCS?_encoding=UTF8&psc=1

Personally, I'm not a fan of single coil chargers like this one. I've always ended up spending more time than I would like trying to line the device up correctly, which seems to defeat the point of convenience. Triple coil chargers are really the way to go, but they're going to run you quite a bit more. I just picked up a Qi-infinity Folding Wireless Dock and have been quite happy with it (that is, after I plugged it into a properly sized wall plug lol) so far, but that's definitely hitting that $50 price point.

ledvedder said:
I'm looking at this one, http://www.amazon.com/Wireless-Compatible-Blackberry-SlimPWRcard-Qi-enabled/dp/B00DQDE1K8. I'd rather not pay $50 for the Samsung charger. Does anyone have experience with this one, or have any other recommendations?
Click to expand...
Click to collapse
I'm using this one and I'm quite happy. 3 Coil is the way to go.
Link

Here is a cross-post from the Galaxy S6 Edge forums:
http://forum.xda-developers.com/galaxy-s6-edge/accessories/quality-cheap-wireless-charger-t3066090
Here is the product from that post:
http://www.amazon.com/gp/product/B0082YVBO0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Kill3rmonk said:
Here is a cross-post from the Galaxy S6 Edge forums:
http://forum.xda-developers.com/galaxy-s6-edge/accessories/quality-cheap-wireless-charger-t3066090
Here is the product from that post:
http://www.amazon.com/gp/product/B0082YVBO0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Wow, and only $10. It's a shame they didn't update it for the newer iPhones. My daughter as a newer iPhone, and it would be perfect if we both could use this. I'm going to order one anyway.

I made this thread about the Samsung charger, but there are other recommendations in it.
Also it should be kept in mind that you should be able to get 50% off the Samsung charger by registering your S6, so it'd actually be $25.

Poetique said:
I made this thread about the Samsung charger, but there are other recommendations in it.
Also it should be kept in mind that you should be able to get 50% off the Samsung charger by registering your S6, so it'd actually be $25.
Click to expand...
Click to collapse
Where did you get your discount? I already registered and I haven't seen anything. Thanks!

I just registered my device when it asked during setup and they e-mailed me the code. Unfortunately it's only 30% off now apparently -_-

I got my Galaxy S6 on the 9th April and I purchased the standard Samsung S Charging Pad from the store too... It works great with a case on... I had a few issues with the charger as it approached 100% it kept disconnecting and reconnecting but nonetheless it's great! It takes 170 minutes to fully charge.