Q&A for [MOD] [unofficial] Multirom V28 (GPE/STOCK - testing)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD] [unofficial] Multirom V28 (GPE/STOCK - testing). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
@montamer can you update the multirom package to make it working with lollipop??? its possible? :fingers-crossed:
Cyanogenmod 12
I was trying to install C.M. 12 on my Moto G XT1031 and some error had occured while trying to boot into C.M. 12 I have a log from Multirom called multirom_log.txt I can attach this log to this post. Hopefully you may know what this actually means. I have been trying to read into the log but I have come up with nothing. It may be that Multirom does not support Android L at the moment. Please let me know if this is the case. Also the Multirom version is V28
multirom moto g + ubuntu touch
So i got multirom on my moto g working. Did it via the app, while the thread says that's not supported yet.
I'm curious, is there any way i can install ubuntu touch now?
thanks a lot
So whats d progress of new multirom v30.Is it building && moto e got its multirom v30 port but is currently in testing ...so what about our devicr
Primary - Secondary
Hi all,
I have Cyanogenmod 11 on primary rom and slimkat 8 on secondary.
Slimkat for my moto g works better, so i'd like to make it primary rom.
There seems to be an option to make slimkat primary.
Does that work? and if so, how to do it correclty?
Many thanks,
Shino
Replace Primary rom
Hello everyone,
I would like to replace the primaly rom. How exactly should i do this?
thanks
Is there any way to remove multirom? I found removal tools for the nexus 5 etc but not for the moto g. Please help
OFFICIAL CM12 is giving error on both primary and secondary installation
Official download of CM12 giving error while installing on XT1033. Tried to install CM12 as a secondary ROM. Also tried to update CM11 into CM12. But its getting stuck on boot-logo. Is any file is need to update in Multi-booted device?
ROM selection option is not displaying, after swapping ROMs
After swapping ROMs between STOCK and CM12, multiple ROM selection option is not displaying. On rebooting it is directly booting into Primary ROM. Whats the solution
Any update from devs who are trying to build MultiRom compatible with Lollipop?
I'm not sure this is the right place to post this, but I have posted less than 10 posts, so I have to.
This may not be news, but I have gotten Lolipop to boot as the primary ROM with the multirom and recovery from this thread. I have built my own kernel from latest CM12 sources. The boot.img is attached to this post, the source is on Github. I hope it works for somebody else than me!
This probabbly won't work for GPE phones without modification to the ramdisk's fstab.qcom.
Hello!
Bootloader unlocked - check!
Rooted - check!
Able to flash a Moto G version of TWRP - check!
However I'm unable to boot into the MultiROM-modified TWRP. After flashing I immediately try to boot into it after selecting Recovery from the fastboot menu and using the Moto's up-volume-key but, I just get "Failed to boot" in yellow text.
Does anyone have any ideas? Once I re-flash the non-MultiROM-modified TWRP I can boot into TWRP recovery fine and boot the system again. Settings says my device is a "Moto G" so presumably it's a 1st-gen. It has 4G (it's a UK model).
Thanks in advance,
Steve
Related
Q&A for [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
update
So how do i update this rom im on 4.4.4l version 6.1 moto g and are u guys going to make one for android l just wondering love this rom best one ive had for this device
about validus
in case the maintainer finds this post, testing the latest milestone (6.2) on falcon (moto g, european version), found a few bugs :
- the setting to disable wifi in profiles and power saving mode for the battery (in the void options) is just ignored. When disabling wifi manually, it comes back everytime I exit the lock screen (maybe it's because of another setting but I couldn't find it).
- in sound option, music effects shows viper audio. When clicking on it, it proposes to install its driver automatically. Except that it doesn't work, since there is no log it's hard to know why. I tried the 3 proposed driver, to reinstall busybox (from the playstore), nothing worked.
- And the touch screen suddenly stopped working in 1 situation, I don't know why. I received a mail, when I tried toclick the screen it didn't work, and I couldn't use the touch screen anymore even after puting the phone to sleep and wake it up again, so I had to do a hard reset (power button pressed for a few seconds).
I'll try to keep on using it, but if the touche screen bug comes back I guess I'll have to do something... maybe try another kernel then, it seems related to the kernel...
http://forum.xda-developers.com/showpost.php?p=57054547&postcount=112
This 6.2 MS is built with what version of DK kernel? 1, 1.1 or 2?
Everything else works fine atm.
request
I just want to say that i have been using this rom as my daily driver since 2 days. no major bugs..
just wanted to request that the theme of the settings app should be changed back to the material white again. thank you
I'm using validus 5.0.2, build date says Jan 1. I noticed in a post you said you added the option to change nav bar dimensions, but I don't see it anywhere. Also "performance" under settings is empty.
I guess the questions asked here are of so little importance they don't deserve to be answered...
Can't post screenshot.
Groups still themed white text on white BG.
Rom, gapps, kernel so anything else I forgot to install apart from these?
Boost xt1031
Are You Going To fix Moto G xt1031 CDMA Data, Calls And Text Soon?
I just flashed latest build 1/14/2015 but WiFi not turning on pls help meh alone with ROM I flashed su and donkey kernel nothing helped meh
no Pie control in new build ?
Moto g consumer cellular xt1034 lollipop
anyone please let me know, I have MOTO G CONSUMER CELLULAR XT1034 UNLOCKED Device can i install original LOLLIPOP for my device (NOT ROM)
dracula1520 said:
no Pie control in new build ?
Click to expand...
Click to collapse
The latest build does have pie control, and I love the look of it. Although, I can't figure out how to configure 2nd layer buttons.
Boot loop
Hi guys,
thanks for this ROM but...
I can't understand.... is it for xt1032?
Cause I tried to flash latest build (v7.0) and it stucks on the boot logo... waited for 20 minutes...
any suggestions?
in latest build I cant find PIE controls. Maybe you forgot to include them? Apart from that thanks validus team for this awesome rom! Yesterday I made the jump from milestone 6.2 to lollipop and I am impressed
@koradiavatsal
Just reporting...
Bootloop after flashing the latest version with or without gapps.
koradiavatsal said:
A new test build
This will probably boot. Please confirm
Click to expand...
Click to collapse
@koradiavatsal Yup, boots all right!
@koradiavatsal I've just downloaded the latest version, I'll report back ASAP.
Q&A for [ROM][4.4.4] CyanogenMod 11 for Acer A510/A511 (with UMTS/3G) [UNOFFICIAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] CyanogenMod 11 for Acer A510/A511 (with UMTS/3G) [UNOFFICIAL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
[A511] check.partition.size=[__PROP_UNDEFINED__]
Hi,
I've tried installing CM11 on my A511. So in fastboot I've installed recovery-cwm-shreps-6.0.5.0-a510-lvm.img (and later, just to try recovery-cwm-shreps-6.0.4.9-a510-lvm.img).
After a reboot and wipe, I have used "apply update from external strorage" on file cm-11-M11-20141018-UNOFFICIAL-a510-a511_lvm.zip (and later, just to see, what happens cm-11-M10-20140920-UNOFFICIAL-a510-a511_lvm.zip).
In every case after "Verifying update package..." the message check.partition.size=[__PROP_UNDEFINED__] is displayed and everything stops.
What am I doing wrong?
AmiH_ said:
Hi,
I've tried installing CM11 on my A511. So in fastboot I've installed recovery-cwm-shreps-6.0.5.0-a510-lvm.img (and later, just to try recovery-cwm-shreps-6.0.4.9-a510-lvm.img).
After a reboot and wipe, I have used "apply update from external strorage" on file cm-11-M11-20141018-UNOFFICIAL-a510-a511_lvm.zip (and later, just to see, what happens cm-11-M10-20140920-UNOFFICIAL-a510-a511_lvm.zip).
In every case after "Verifying update package..." the message check.partition.size=[__PROP_UNDEFINED__] is displayed and everything stops.
What am I doing wrong?
Click to expand...
Click to collapse
Hi,
What's your bootloader version ?
On which recovery and ROM were you before trying this ?
Did you try with TWRP ?
Hi Shreps
Shreps said:
Hi,
What's your bootloader version ?
On which recovery and ROM were you before trying this ?
Did you try with TWRP ?
Click to expand...
Click to collapse
Bootloader is JB-8efc225 and I am running Image Acer_AV051_A511_RV00RC06_EMEA_DE (Android 4.1.2)
Nope, I have not tried TWRP (yet)- all manuals, I have seen said CWM.. do you think, using TWRP will do?
AmiH_ said:
Hi Shreps
Bootloader is JB-8efc225 and I am running Image Acer_AV051_A511_RV00RC06_EMEA_DE (Android 4.1.2)
Nope, I have not tried TWRP (yet)- all manuals, I have seen said CWM.. do you think, using TWRP will do?
Click to expand...
Click to collapse
Both TWRP and CWM are compatible with AOSP ROM (Cyano, AOKP, Paranoid, etc.)
I think we never try a jump from 4.1 stock to 4.4.4
Maybe this is the issue. Try with the latest TWRP first, and if it doesn't work try to flash CWM 6.04.5 and flash CyanogenMod 10.1 or 10.2 (Android 4.2.2 / Android 4.3)
If it's working fine, then upgrade recovery and flash a 4.4.4 ROM
applied EBossa
Hi,
TWRP did the job. Thank you very much
[Q&A] [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Q&A for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i need help
Az-one786 said:
here you go... http://forum.xda-developers.com/showthread.php?t=2397942
you can choose between micro/nano/pico
Click to expand...
Click to collapse
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(
mohammad jarrah said:
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(
Click to expand...
Click to collapse
I think u should put your questions here http://forum.xda-developers.com/showthread.php?t=1877166
This topic is only for LiquidSmooth questions
About your question: Install BMM and do partition stuffs then you will be able to install 4 more custom ROMs on your phone :fingers-crossed:
But first, read this great tutorial (including videos)
http://forum.xda-developers.com/showthread.php?t=2602229
System 6 Error when loading Nano/mini Gapps on LS v32 Atrix2
I got brave today, after much reading on the forums and watching Tech ArnY rooting videos and BMM 0.3.4 - Great information.
Here are the steps that I took today and their results:
1.) Rooted the Atrix 2 MB865 (AT&T) that has OTA ICS 4.0.4 ROM. Rooting was successful,
2.) Post install of MBB 0.3.4 and SuperUser, I kept the ICS 4.0.4 ROM on System 1 of the phone.
3.) Next, following Tech Arn Y's teaching, I was able to successfully flash LiquidSmooth (AcePort-LS-KK-Milestone-3.2-edison.zip) onto System 3 post wipe clean /dalvik, et cetera and successful install.
4.) So far, so good. Next I attempted to load GAPPS from this link (http://forum.xda-developers.com/showthread.php?t=2397942). Again, post check of MD5 check sum for both mini and nano GAPPS - no issues.
5.) While attempting to flash either the mini or nano GAPPS onto the Atrix 2 into System 3, it shows the following (E: Error in /ext/pa_gapps-modular-nano-4.4.4-20141121-signed.zip) (Status 6) Installation aborted.
6.) I can boot into either ROM without issues, however, even after a reflash of System 3 and again successful install of LS-KK-Miestone 3.2, GAPPS gives Status 6 install error.
Looking for clues in these forums, but I have not come across anything yet. Any/all help would be very much appreciated!
@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.
1BadWolf said:
@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.
Click to expand...
Click to collapse
Thanks 1BadWolf for the reply. At first, I thought that the size of the GAPPS was perhaps the issue, but it did not end up to be the case. After continuing my search in XDA Forums (a wealth of great information here without doubt!), I stumbled upon a video that explained Status 6 and Status 7 errors which are the most common when flashing GAPPS post ROM into any phone. In my case, here is the summary of the events:
1.) Flashed pa-gapps mini 4.4.4 (at 229 mbytes ) - Status 6 error.
2.) Wipe clean System 3 and then flashed pa-gapps-nano 4.4.4 (at 120 mbytes) 2x - Status 6 error.
3.) Being somewhat frustrated, and yet challenged, I took the clue for the status 6 error and by chance, I grabbed the Slim_mini-gapps 4.4.4 (at 65 mybtes) - Gapps successfully loaded!
4.) Wanting to confirm whether the issue lives in the size of the GAPPS - or - something in one of the scripts (Meta-INF > com > google > android > update-binary or update-script), I went ahead and did another Wipe-Clean and flashed Slim-normal-gapps 4.4.4 (at 183 mbytes) - Gapps successfully loaded
Summary: In business and in life, something a solution or a work-around is found and implemented without knowing the root cause!
Hopefully, the documenting of my journey here will be beneficial to someone down the road just as many of the posting in this forum have been (and continue to be) to me too!
I have installed this ROM on my Atrix 2.. Stable rom as mentioned.I just found one bug,i.e The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
Expecting a hope..
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?
_partha_ said:
I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
Click to expand...
Click to collapse
parthapmc said:
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?
Click to expand...
Click to collapse
Hey guys, thanks for trying out my Liquidsmooth port and offering your feedback. Unfortunately, I'm no longer able to work on the existing ports or even lollipop since development has completely died down.
This is because our current recovery, BMM isn't able to boot any lollipop rom and it's the only working one we have. All developers and supporters have moved on pretty much, so all you can do is just play around with what's there. I'm still kinda around with my A2, but don't have the time to do anything anymore since I've moved onto a newer device, work, life, etc.
If you want someone to blame for this, firstly blame Motorola for the locked bootloader and then blame Google for making 5.0 have enforced SELinux which is why we can't boot any LP rom. Aside from that, this device is amazing to have and I hope you all have a wonderful time with it.
Sent from the Ace's MB865 using Tapatalk
Hello guys
I successfully installed CM 10.2 - with description on Cyanogenmod wiki site with CWM recovery.
(http://wiki.cyanogenmod.org/w/Install_CM_for_xt897) it was few months ago, and now this branch is obsolete
Now i would like to move on CM-11-M12
i tryied to install with new guideline on cyanogen mod but it stops when i am showing the package at cwm - it is saying that package is not for this phone.
So main question - does somebody done something like that ? if so, please give me few main guidelines how to do that, or what i am doing wrong ?
Thanks in Advance
Wojciech
Update your recovery - CWM is not very updated for the PhotonQ.
Use TWRP or OpenRecovery for a more updated recovery.
arrrghhh said:
Update your recovery - CWM is not very updated for the PhotonQ.
Use TWRP or OpenRecovery for a more updated recovery.
Click to expand...
Click to collapse
Thanks for that - it was very helpful.
one more thing that should be noticed and it isn't written on tutorial :
for Photon q you should use moto_msm8960_jbbl because normal will not work, info found on CM blog post
lightning3 said:
Thanks for that - it was very helpful.
one more thing that should be noticed and it isn't written on tutorial :
for Photon q you should use moto_msm8960_jbbl because normal will not work, info found on CM blog post
Click to expand...
Click to collapse
We don't have many tutorials here. I spose you just gotta do a lot of reading before you understand all of the little idiosyncrasies with the device .
Q&A for [ROM][5.0.2][lollipop][xt925 and xt926]Resurrection Remix 5.3.5 Unofficial
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][lollipop][xt925 and xt926]Resurrection Remix 5.3.5 Unofficial. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
not work
hello,link for xt925 is offline
i getthis rom in other link..and flash it..
....not work..
not install
HELLO, DOWNLOAD VERSION UNIFIED AND SEND ME ERROR Error executing binary updater in zip IN TWRP , AND NO VERSION AVAILABLE FOR XT925 , XT925 HAVE A DIRTY WITH UNICORNS ROM V9.1
signal
does this rom have network issue i am on a gsm network and every lollipop i try for the xt926 i have to reboot the phone about 3times before i get signal
Can't download xt925
I can't download the xt925 version its not there
Boit loader is not unlocking
Hey Everyone,
I am using moto xt926 i wana install this rom but the bootloader is not unlocking what to do can any one help me ?
M0yc3z said:
HELLO, DOWNLOAD VERSION UNIFIED AND SEND ME ERROR Error executing binary updater in zip IN TWRP , AND NO VERSION AVAILABLE FOR XT925 , XT925 HAVE A DIRTY WITH UNICORNS ROM V9.1
Click to expand...
Click to collapse
I just removed the first line in the updater-script under: META-INF\com\google\android\updater-script. Make sure you have the right device though.