Hello.
I succesfully port Vanilla OS from this post: http://forum.xda-developers.com/android/development/rom-vanillaos-walton-primo-f3i-t2849699 to my GooPhone i6 MTK6572.
OS works very fast, smooth and great, but I've problems with GSM.
After add IMEI and put SIM card inside (Virgin Mobile), device recognize card, but shows no signal icon. Also, lockscreen shows: "NO SERVICE - VIRGIN MOBILE".
Everything works perfectly on crappy and laggy stock ROM.
How can I fix that?
Which files I must replace in system folder?
i have see a solution to change imei number with a taste code manufactury mode and change imei, gsm works after have new imei
Related
Hi,
I managed to install Android on my HTC Polaris using HaRET. Everythings works fine (GSM, WLAN, GPS, Bluetooth) except mobile internet via GPRS, EGDE or UMTS. I updated the radio to the latest version I could find for my Polaris (1.65.38.14). I even called my mobile carrier (O2 Germany) to get the correct APN settings. With WM the connection via UMTS works perfectly.
Any ideas what goes wrong? If I would be able to solve this problem, I would abandon WM and flash Android on my phone.
I tried Android 2.1 and 2.1, but the problem remains.
Here are the details of my setup:
Device: O2 xda Orbit 2, i.e. HTC Polaris 200
Android: 2.2
Kernel: 2.6.25-01130-g99a3b07-dirty bell(at)bell-laptop #383
Build:eu_vogue-userdebug 2.2 FR91 eng. martin.20100711.172453 test-keys
Thanks for any help,
Ralf
you can try following to activate mobile inet connection:
- put your phone into airplane on - airplane off
- (re)enter your apn via settings - wireless&network - mobilenetworks - access point names - press menu to enter new apn(s) or reset to defaults.
- force connection using modem.apk (connect/disconnect)
- reinstall/install another build, leave data
- install togga (toggle data connect), put on your sdcard and install via file manager
- use another zImage
- use stock radio
HTH
rhaller said:
Hi,
I managed to install Android on my HTC Polaris using HaRET. Everythings works fine (GSM, WLAN, GPS, Bluetooth) except mobile internet via GPRS, EGDE or UMTS. I updated the radio to the latest version I could find for my Polaris (1.65.38.14). I even called my mobile carrier (O2 Germany) to get the correct APN settings. With WM the connection via UMTS works perfectly.
Any ideas what goes wrong? If I would be able to solve this problem, I would abandon WM and flash Android on my phone.
I tried Android 2.1 and 2.1, but the problem remains.
Here are the details of my setup:
Device: O2 xda Orbit 2, i.e. HTC Polaris 200
Android: 2.2
Kernel: 2.6.25-01130-g99a3b07-dirty bell(at)bell-laptop #383
Build:eu_vogue-userdebug 2.2 FR91 eng. martin.20100711.172453 test-keys
Thanks for any help,
Ralf
Click to expand...
Click to collapse
Have you put the MMC and MNC values for the APN correctly? I had that problem.
Hello,
as posted in another answer, none of warm donut, eclair and froyo was able to get my XDA2(Pola200) online by 3G due booting from haret.
Also none of the tricks given above and in another posts and wikis(i tried everything, believe me)had done the trick.
After flashing it on NAND (Kallt_kaffes eclair RLS7c with latest available eclair kernel), 3G was starting out of the box after boot, w/o further configurations. Curiously with an apn entry from O2. I use a prepaid provider which is based on the O2 network but it has another apn name.
Better be careful, maybe it will be an expensive experience, to go online with the wrong apn entry - in my case it wasn`t.
Anyway, dont`t know what`s the difference relatet to the hardware of my device between Haret and NAND boot and not/working modem.
Matthias
hi matthias,
i have a very similar problem here in austria, using Yesss (which is using the Orange network). i can't get any data connection with froyo build. so i switched back to eclair (VaniljEclair_RLS7c) and 3g connection works out of the box - curiously with an apn from orange.
no idea what is wrong with froyo?
i'm using polaris 200 (xda orbit 2) with haret boot.
Hi i just bought a galaxy beam from a shop in singapore.
Everytime i try to install an appz from google market, it doesn t even start to download, just get a message "download unsuccessfull".
this happend either i am in wifi or 3g
never experienced such a prob with any of my android phones.
here is the version:
firmware 2.1-update 1 <-- is there a newer update?
kernel 2.6.29-zeus1 [email protected]
it seems that it s an unlock starhub phone, was new.
i am in france using another operator, i ve seen in the language only english is available for this phone.
thxx for your tips
herve
Moved to general as not device related to the SGS
hi,
any chance to have a subsection for galaxy beam?
i ve did some debuging.
when i took off my sim card and sd card , market was working over wifi
i ve put the sim card, market works
i put the sd card i had in my nexus, market doesn t work :'(
i guess it s a rom bug
I'm Trying to install Android in my china phone with much tutorials i found in internet, about windows mobile 6.5 phones booting android, but i dont know where to start from
someone can tell me a specific GenY or Android mod (Xdandoid for example) for my phone? if dont know, a version with WQVGA support? needs or have a tutorial?
my phone is a Nexus MF168 (same as MF68)
CPU 360MHZ HI-SILICON K3, Processor MTK 6235
Dcual SIM (i dont need dual sim, its not a problem for me)
Windows mobile 6.5
thanks for help and sorry for confusing post
EDIT: i tried XDAndroid (http://forum.xda-developers.com/showthread.php?t=601751), formated sd to FAT 32, put all files in root(include the .txt file), and after i execute appear:
"HaRET Boot
Shutting Down Hardware
Turning of MMU...
PSR=600000df"
and anyting more, i need to remove battery to restart phone, some help? a specific version for this phone? its low after this or really crashed?
thanks for help
Hello,
I have problem with using RAM Expander, it shows me error message that my kernel does not support using swapp file..
So I contacted Developer and he told me that I should switch to cyanogenmod, well I have B3000 (chinese phone), and for this device there is no support.. If I install this mod I will loose my application for Analog TV tuner (and I can not find that one anywhere to download), and I have double SIM, So I also think that I will be able to use just one SIM card after I flesh my phone, (if I install ROM for some other device , if that is possible)..
Anyway, if anyone have any suggestion I will be very grateful!
Regards,
Emrah.
good day everyone!:highfive:
i have successfully ported lewa os (ICS) to my device which is Kata i1 a MEDIATEK MT6577 device, i already fixed camera issues, but now i noticed when i turned on my Mobile DATA, the signal is only in GPRS, then i tried to switch the preferred network to "3G ONLY" i get no signal. can anybody point me in the right direction? i don't know which files to copy from stock or which file to modify. TIA