Related
Hello, I have a Motorola Defy which i have rooted and installed clockworkmod on it. I tried to install Cyanogen mod 7.1 from the website. The phone got to the boot screen where it continued to cycle through it thing and nothing more. I restarted the phone and now it gets stuck at the first screen where its says "google". I tried to enter recovery again (power + volume down) and clockworkmod is completely gone. I want to go back to the stock OS so it atleast works again. Ive tried using the update.zip option in the stock recovery mode but I keep getting an error "failed to verify whole-file signature" when using a signed copy of cyanogen mod. I also tried putting my backup in a zip with the same error. Ive even tried formatting my sd card. What do i do?
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a different way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Marvelicious75 said:
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a dirrerent way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Click to expand...
Click to collapse
I cant use the program as my phone doesnt get detected when connected to my pc.
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Marvelicious75 said:
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Click to expand...
Click to collapse
I fixed it, there were a different set of buttons to hold to get into boot loader. The default recovery was not over written as i thought (happened to all my other phones). Thank you very much for you help. It has been very much appreciated.
Glad to hear it.
I was trying to find a custom recovery, or any recovery that will work on my lg realm. I boot recovery and it gives me a error message so im guessing its either wiped out or blocked...any ideas out there on how to correct or replace it
twtoned said:
I was trying to find a custom recovery, or any recovery that will work on my lg realm. I boot recovery and it gives me a error message so im guessing its either wiped out or blocked...any ideas out there on how to correct or replace it
Click to expand...
Click to collapse
Looking for one as well. I have not found one.
Recovery is actually preinstalled
I found this just tooling around. Use your favorite file browser, I used
Total commander. /system/vender/itson
The zip file is there. Hope this helps. (Rooted LG ls620)
Could you explain in a little better detail on what you mean Enigmatic177... I'm pulling my hair out Hehe
If anyone makes or finds a working recovery please post it.
Itson is a zip file that was installed after last update it has the basics to unlock the boot loader. I unpacked it used Rom toolbox pro rebooted to RECOVERY did regular reboot system upgraded.
A couple if bit mapp errors 11111. Then I basically flashed CWM.
Before you do this the partitions change from ext2-ext4. I'd advise
Backing them up.
LG Realm & exceed 2 TWRP recovery/fastboot files
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
TWRP recovery help L620 LG Realm
hello I followed the steps in the read me file and i succeeded in installing twrp although im having troubles booting up to my system os. when i power on my device it takes me straight to twrp. i have a feeling i might of missed a step. i tried creating a backup but i cant because i noticed my screen turns off fast. do you think you might know what might be the problem why i cant boot up to my os? thanks!
I think i know what seems to be the problem. I think i might have accidentally replaced the boot img with the twrp recovery img. i did not make a backup before this happened. is there anything i can do to make my phone boot up to its normal image? thanks
Nope. It is officially a paperweight and no one I know of has access to the stock ROM either.
Sent from my LGLS620 using XDA Premium 4 mobile app
Hey
Has anybody found a custom rom?
Finally. Easy as pie
Ok, I downloaded an image (w5c_twrp_bumped.img)
put that img on the root of my sd card
downloaded Rashr from the google play store
opened rashr and tapped 'recovery from storage', navigated to external sd and tapped the image and tapped
ýes please'
flashed it. after the flash the phone rebooted into the twrp recovery.
then just rebooted back into the system
worked perfectly.
im new here im not allowed to post outside links yet, just google "w5c_twrp_bumped.img" should take you to a link for a download of that recovery
i got twrp now as a custom recovery. on my lg realm.
That_One_Person760 said:
hello I followed the steps in the read me file and i succeeded in installing twrp although im having troubles booting up to my system os. when i power on my device it takes me straight to twrp. i have a feeling i might of missed a step. i tried creating a backup but i cant because i noticed my screen turns off fast. do you think you might know what might be the problem why i cant boot up to my os? thanks!
Click to expand...
Click to collapse
You have the bumped recovery so all i can say if u messed up is to flash a stock rom u can find on google i had to re flash mine a few times messing with root
right on, thanks for the info. I had no problems at all. it all fell in place like i was hoping. The Realm is the easiest device Iv ever rooted, flashed, and messed with. Well, as far as rooting and flashing a custom recovery. dunno bout roms though. Im sure its simple?
The_android_Modder said:
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
Click to expand...
Click to collapse
OK, I grabbed and extracted this. I used Flashify to simply flash the recovery (w5c_twrp_bumped.img) and it works like a dream on my LG Realm.
OTOH, trying the same on an Exceed 2 gets me TWRP, but it cannot mount much of anything and the backup fails. After failing, it tells me "No OS found, continue?" I continue and get the message "Appears your device has no Root, install now?' I am absolutely certain I have root, or wouldn't even be able to run Flashify, so I continue and it simply boots into the OS just fine. Perhaps the readme isn't complete, as I see the following file in the extracted folder (resources.zip) with no explanation of why it's there. It "appears" to be a flash-able zip that installs "itson" (whatever THAT is). Note that the Realm has this in the /system/vendor/itson, yet the Exceed 2 doesn't.
Have you actually used this on an Exceed 2? And if so, what am I missing here?
The_android_Modder said:
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
Click to expand...
Click to collapse
Link is DEAD. Any chance you can reupload this file? I can't make heads or tails of some of this thread and I don't want to destroy this phone. Thanks!!!
petermg said:
Link is DEAD. Any chance you can reupload this file? I can't make heads or tails of some of this thread and I don't want to destroy this phone. Thanks!!!
Click to expand...
Click to collapse
I'll do you one better. Just forget about the post you replied to, as it's convoluted as hell. Install TWRP 2.8.6 from here. Ignore the big red warning about the Realm, as he evidently hasn't updated the OP. You can view my notes regarding the Realm in this reply. Tested several times and verified working better than anything else available. Easiest recovery to install I've ever dealt with (all done with an .apk). The option to access via cold boot (battery pull procedure) is something to behold
Be sure to thank the developer, even if you need to create an account to do so. Very VERY nice work!
fathergweedo said:
I'll do you one better. Just forget about the post you replied to, as it's convoluted as hell. Install TWRP 2.8.6 from here. Ignore the big red warning about the Realm, as he evidently hasn't updated the OP. You can view my notes regarding the Realm in this reply. Tested several times and verified working better than anything else available. Easiest recovery to install I've ever dealt with (all done with an .apk). The option to access via cold boot (battery pull procedure) is something to behold
Be sure to thank the developer, even if you need to create an account to do so. Very VERY nice work!
Click to expand...
Click to collapse
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Before you replied I installed the version 2.8.5 from here:
http://androidforums.com/threads/twrp-2-8-5-0-for-realm-ls620-and-exceed-2-vs450pp.908704/
Is 2.8.6 better? Looks like the 2.8.5 can't be booted into via key combo from power off? Are there any other differences? I just used the Rashr flash tool from the market to flash 2.8.5. Worked flawlessly. This is actually my mom's phone and it wanted to do a system upgrade but I wanted to back it up first so that's the reason I wanted a recovery.
Pretty cool though, this recovery installs just via an APK!!!? That's amazing!
I'm tempted to install this on her phone next time she comes over... it should be fine right?
Thanks again!!!!!!!!!!
petermg said:
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Before you replied I installed the version 2.8.5 from here:
http://androidforums.com/threads/twrp-2-8-5-0-for-realm-ls620-and-exceed-2-vs450pp.908704/
Is 2.8.6 better? Looks like the 2.8.5 can't be booted into via key combo from power off? Are there any other differences? I just used the Rashr flash tool from the market to flash 2.8.5. Worked flawlessly. This is actually my mom's phone and it wanted to do a system upgrade but I wanted to back it up first so that's the reason I wanted a recovery.
Pretty cool though, this recovery installs just via an APK!!!? That's amazing!
I'm tempted to install this on her phone next time she comes over... it should be fine right?
Thanks again!!!!!!!!!!
Click to expand...
Click to collapse
That one will cold boot with the battery pull procedure too. A little further down that thread you'll see I modded it to work correctly with the Exceed 2 in addition to the Realm. I like the 2.8.6 better if only that the dates of the backup are correct now. The 286.apk will work fine and overwrite your current recovery. If you leave it installed, you can always open it and reboot to recovery from within the app. If I have more time I'll post a screenshot, but running late for work. I think the screen dimming/timeout issue was fixed as well, but I haven't verified that. I normally disable that in TWRP anyway, as I like to monitor what it's doing during a backup/restore in case of errors.
fathergweedo said:
That one will cold boot with the battery pull procedure too. A little further down that thread you'll see I modded it to work correctly with the Exceed 2 in addition to the Realm. I like the 2.8.6 better if only that the dates of the backup are correct now. The 286.apk will work fine and overwrite your current recovery. If you leave it installed, you can always open it and reboot to recovery from within the app. If I have more time I'll post a screenshot, but running late for work. I think the screen dimming/timeout issue was fixed as well, but I haven't verified that. I normally disable that in TWRP anyway, as I like to monitor what it's doing during a backup/restore in case of errors.
Click to expand...
Click to collapse
THANKS!!!! I'll make it a point to flash that to my mom's phone next time I get the chance!
Hello, my name is Shagington
I have been slowly unlocking the potential of my tf700t, yet I have come to a point where I am stuck loading the android OS. The problem started when I installed xposed to gain the ability to modify the permission of apps. Now it just sits with the loading circle spinning around and 'round. I tried wiping from the bootloader yet the same thing happens. While looking into the bootloader more, I found twrp installed after what I thought were many failed attempts. I tried a wipe from that as well and the same thing happens. I was thinking about just flashing a stock (rooted) rom with twrp but I am afraid of getting into a worse spot than I already am in, any help is appreciated.
Thanks, Shag
You need to post your bootloader version (read the tiny script when you boot with Power and Volume Down) and your recovery version.
That will determine what you can flash or what type of repair you can try.
Do you have fastboot and adb setup on your PC?
Check if you have a fastboot connection when booted into the bootloader and adb when booted into recovery.
See if you can capture a logcat of the boot process in adb.
Then report back.
Whatever you do, do not use the Wipe Data option from the bootloader!!!!!!!!!
Thank you for the quick reply berndblb, it seems im on build us 10.6.1.14.8-20130514. I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb but I will give it a go tomorrow. Will any custom rom work with the current build i have?
Thanks again, Shagington (Newbington)
shagington said:
Thank you for the quick reply berndblb, it seems im on build us 10.6.1.14.8-20130514. I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb but I will give it a go tomorrow. Will any custom rom work with the current build i have?
Thanks again, Shagington (Newbington)
Click to expand...
Click to collapse
Yes, there are. You are one version behind to the latest (and last) bootloader 10.6.1.14.10. Might be a good idea to update to the latest while you're at it...
Which recovery and version thereof did you flash?
Once we are sure that you have compatible software installed you can flash a bootloader/TWRP package to get you up to date, but let's resolve your current pickle first.
berndblb said:
Yes, there are. You are one version behind to the latest (and last) bootloader 10.6.1.14.10. Might be a good idea to update to the latest while you're at it...
Which recovery and version thereof did you flash?
Once we are sure that you have compatible software installed you can flash a bootloader/TWRP package to get you up to date, but let's resolve your current pickle first.
Click to expand...
Click to collapse
Thanks again for responding good sir, I am on twrp 2.8.5.0, which still loads just fine.
-shagington
When you install xposed it puts an emergency uninstall zip on the internal sdcard partition. Try flashing that from twrp to reverse it out.
Be careful with xposed it can sofbrick easily as you have found out.
shagington said:
I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb
Click to expand...
Click to collapse
I tried the first Win10 preview, and I just had to connect the tablet and run adb.exe - it worked fine with the automatically installed drivers.
Thanks for the replies guys, I couldnt find any zips on my internal, I looked through almost every folder. After looking through the adb tutorials, it is a little to intimidating for me. Kinda sad, I was under the impression that now I have twrp I could just throw some other rom on quickly or even a download a backup from someone else with the same versions to recover and be done with it. I think im just going to leave it soft bricked for a while and use my nexus 7 for now. Appreciate the help guys, it's just a little over my head.
-Shag
Hey guys!
To start, I want to say what an amazing place XDA is and how much information and knowledge you can get from here and how awesome the moderators are. I don't think I could ever find another amazing and/or helpful community such as those found here! Thanks to all who have helped me out with my Android issues!
Now to my issue and I apologize ahead of time if there is another thread (or related thread) found in the forum.
As the title states, I have a 2013 Motorola Moto G XT1031 Boost Mobile device. I had upgraded it to Lollipop 5.0.2 or 5.1 when it came out (I can't remember which one it was) and I had then decided to root it. I can say that I believe I was successful in rooting the device because I was able to install Supersu and use RootChecker to verify the install. Everything was going okay until i decided to research and eventually install a custom recovery and attempt to install a custom ROM. Well, let's just say that the recovery install was a bust...
In doing my research for a custom recovery, I found that TWRP had a custom recovery for my phone and apparently for my firmware via TWRP's app on the Play Store. So, I searched for my device in their in-app search for a custom recovery, downloaded it and installed it from the app. Now, my gut told me that this probably wouldn't work and that I should probably be installing a custom recovery via CLI. Nope. I didn't do this. Instead, like I said, I installed a custom recovery from the app itself. That screwed things up for me. I have no idea if it was the install, but my phone began to act incredibly strange. When in the TWRP recovery, my screen had this line that would continuously scroll from top to bottom. It wasn't a completely solid line, but it was transparent, almost like an empty thermometer glass stick was going down the screen. It was weird and not normal. I figured the phone's software was partially broken. It only did this in the TWRP recovery. Nowhere else did this happen. It was slightly annoying.
Later on I decided to install a custom ROM. Again, I did the necessary research to find out if there were any ROMs available for my phone (using XDA of course and others) and found that there were a few out there. So, I downloaded one (wish I could remember which one) and attempted to install it...keyword there. After attempting the install, my phone would not boot. Like at all. Dead. So back to the drawing board I went to try and reverse the damage. Using XDA (ironically) and a plethora of other sites, I tried to resurrect my phone and bring it back to life. After countless hours of trying and trying and trying and more and more research, I just gave up. The phone is dead. Great. $170 spent on a phone to break it a year later.
It's been roughly 4-5 months since I have attempted to redo the process and after another minor attempt, somehow I was able to remove the root completely, including the custom recovery and ROM. I don't know what the heck I did, but it worked....sort of. The phone is now stuck in a bootloop on the logo and sometimes the "bootloader has been unlocked" screen when try and factory reset the phone from the default recovery. When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set and to have this and that. I have this and that installed on my PC, but obviously cannot enable USB-debugging which is needed for ADB and fastboot to recognize my device.
So, my question for anyone who would like to help me out is this: what are my options? Is the phone recoverable? Is there any way I can get ADB/fastboot to see my device and finally install the stock firmware on the phone? I have the proper drivers installed and ADB/fastboot are on my PC. Any help would be amazing, even if you have to tell me to junk it.
blckdragn22 said:
When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set
Click to expand...
Click to collapse
This is incorrect, where did you read that? To reinstall the stock firmware using fastboot, you must be able to boot to the bootloader menu only.
I heard this from a few websites actually, although I could never find a situational fix for my phone. I am trying to restore back to Lollipop without a custom recovery, because within the past hour I found out TWRP was never fully removed when I tried booting into recovery from the AP Fastboot menu when doing to power+vol down option. The TWRP logo shows for about 10 seconds and then the phone tries booting normally, showing the unlocked bootloader warning.
So, yes I can boot into the bootloader menu all day long with no problems. It's just an selection I make doesn't get me anywhere. My question I guess now is: how do I go about reinstalling stock firmware via the bootloader menu. I have Minimal ADB and Fastboot installed on my PC. If I need the full ADB, I can download that. And of course I'd need the firmware, too.
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
This thread had the firmware I was looking for thank you. I believe I have the flashing stock firmware process down, I hope. I'l refer to the guide if I need help. Thank you so much!
_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
I am trying to follow the steps listed here http://forum.xda-developers.com/showthread.php?t=2542219&page=35 and for some reason I cannot run any of the commands pertaining to the sparsechunks. This is what I get:
Is there anything you could tell me about that?
Edit: I was able to figure what the issue was when trying to write the sparsechunks. I had to insert a "." after 'sparsechunk' because that is how the file is named in the folder. However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
blckdragn22 said:
However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
Click to expand...
Click to collapse
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
_that said:
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
Click to expand...
Click to collapse
I will try that. There was a ...sparsechunks.0 as well apart from sparsechunks.1, sparsechunks.2 and sparsechunks.3. Shall I include that, too?
And adding the screenshot was an amateur mistake. My bad.
@_that this worked like a charm. Phone is 100% working ans usable now. Incredibly helpful. Thank you so much!
Not sure if my phone is a lost cause and only good as a door stop. My phone at one stage would only display a screen asking me to plug into smart switch to recover the phone so I tried that but smart switch wasn't happening. I downloaded the latest stock rom and installed it successfully via ODIN but now my phone will not get past the boot logo. I can only get into download mode, Any advise on if I can get my phone working again?
Thanks
Andrew
andrew88 said:
Not sure if my phone is a lost cause and only good as a door stop. My phone at one stage would only display a screen asking me to plug into smart switch to recover the phone so I tried that but smart switch wasn't happening. I downloaded the latest stock rom and installed it successfully via ODIN but now my phone will not get past the boot logo. I can only get into download mode, Any advise on if I can get my phone working again?
Thanks
Andrew
Click to expand...
Click to collapse
Bro, I've been there and this is why I made an account on xda to see if my s6 (G-920F) can be fixed in any way. Yesterday I had the same thing as you when I tried to re-flash the phone with its proper, latest stock-ROM (UK/EE Nougat 7.0). Given how it hadn't worked, the update attempt through Odin screaming a big "FAIL!" at me, I was afraid I had bricked it completely, so I proceeded to re-install TWRP with Odin by putting the phone in download mode. I wiped the phone again with TWRP and now I'm not sure what I have to do as I am stuck with the UK Nougat bootloader and nothing else on it.
Before this whole ordeal I had rooted the phone and unlocked the bootloader following some instructions from a Youtube video and successfully installed a nighty build of LineageOS, which was buggy as **** (couldn't answer calls, use data, use the camera and a ****ton of apps were just not working). Dumbly enough, I thought I could just remove it through a wipe and put something else back on it but oh was I wrong.
Right now I'd just want to get my phone back to working (like you), as I am out of a job and need to be able to take phone calls with a normal, working phone.
Sorry I couldn't be of much help, but yeah maybe a first step towards fixing it would be to flash TWRP recovery on it and through the terminal, see what bootloader version you have with the command "getprop ro.bootloader". At least you will know the version of the broken bootloader you're experiencing difficulties with and *hopefully* an actual dev from the forums will entertain themselves in trying to solve this noobish puzzle we've created for ourselves.
Seriously, if there is a dev ready to board this crazy adventure with us, please help.
My namesake or username is pretty much a clue to what got me into this position.
I wish it was that simple for me mate, I cant access the recovery menu, I've tried flashing various recovery options but cant boot into any of them. I'm certain I could fix the phone if I could get to recovery. I'm now leaning towards it being a hardware fault with my phone. As you have access to recovery I think you may have more luck with your phone.
TerribleChoices said:
Bro, I've been there and this is why I made an account on xda to see if my s6 (G-920F) can be fixed in any way. Yesterday I had the same thing as you when I tried to re-flash the phone with its proper, latest stock-ROM (UK/EE Nougat 7.0). Given how it hadn't worked, the update attempt through Odin screaming a big "FAIL!" at me, I was afraid I had bricked it completely, so I proceeded to re-install TWRP with Odin by putting the phone in download mode. I wiped the phone again with TWRP and now I'm not sure what I have to do as I am stuck with the UK Nougat bootloader and nothing else on it.
Before this whole ordeal I had rooted the phone and unlocked the bootloader following some instructions from a Youtube video and successfully installed a nighty build of LineageOS, which was buggy as **** (couldn't answer calls, use data, use the camera and a ****ton of apps were just not working). Dumbly enough, I thought I could just remove it through a wipe and put something else back on it but oh was I wrong.
Right now I'd just want to get my phone back to working (like you), as I am out of a job and need to be able to take phone calls with a normal, working phone.
Sorry I couldn't be of much help, but yeah maybe a first step towards fixing it would be to flash TWRP recovery on it and through the terminal, see what bootloader version you have with the command "getprop ro.bootloader". At least you will know the version of the broken bootloader you're experiencing difficulties with and *hopefully* an actual dev from the forums will entertain themselves in trying to solve this noobish puzzle we've created for ourselves.
Seriously, if there is a dev ready to board this crazy adventure with us, please help.
My namesake or username is pretty much a clue to what got me into this position.
Click to expand...
Click to collapse
andrew88 said:
I wish it was that simple for me mate, I cant access the recovery menu, I've tried flashing various recovery options but cant boot into any of them. I'm certain I could fix the phone if I could get to recovery. I'm now leaning towards it being a hardware fault with my phone. As you have access to recovery I think you may have more luck with your phone.
Click to expand...
Click to collapse
Oh dear.
Yeah it does sound like something got deeply ****ed up in this case. I had the luck to somehow get past the smart switch error when the phone died of low battery. As I attached it to the charger I quickly boot it into download mode before the screen would become a bootloop again and that's where I was able to reinstall the latest version of TWRP recovery. After that, I was able to flash a stock ROM of Nougat that didn't have a ****ed up bootloader like I had. Specifically the one from this thread: https://forum.xda-developers.com/galaxy-s6/help/device-5-binary-3-s6-sm-g920f-t3706025
by forumber2.
It's the Netherlands stock-ROM. Not sure if you're from the US and the carrier would be wrong with that CSC, but it was a good bet for me. I got my phone back to working normally now.
Worst case scenario I'd say see if you have a phone repair shop nearby and ask them an opinion on what could be wrong. I'm just an amateur like you.
Still, I wish you the best of luck with it. Maybe there's still some hope. :/