Related
Hi guys. I have a rooted samsung galaxy ace and i want to change my mac address so i've tried the following command (but i got an error):
Code:
su
busybox ifconfig wlan0 down
busybox ifconfig wlan0 hw ether 00:11:22:33:44:55
ifconfig: SIOCSIFHWADDR: Operation not supported
Is there someone that knows how i can solve this problem? thnx in advance
I have a Moto XT300/Spice.
Enabling the wireless and not have it connect automatically to the configured network, had to forget the network, I was able to run:
Code:
su
busybox ifconfig eth0 hw ether 00:11:22:33:44:55
and it worked, confirmed with
Code:
busybox ifconfig eth0
though I wasn't able to connect to a WPA network anymore, complained that the key was wrong.
Disabling wireless and enabling once more got reset the mac but enabled me to connect again.
And yes, my wireless interface is eth0.
I was tinkering around on my android and found the section where wifi info is specified, including mac address. Did a quick google search and found the article:
http://androidforums.com/t-mobile-g1/3506-changing-spoofing-mac-address.html
Basically you must change the file /data/misc/wifi/nvram.txt, at the end of the file is the mac addr...
Apparently it is bad to reboot with different mac... who knows. I haven't tested it.
snakerdlk said:
I was tinkering around on my android and found the section where wifi info is specified, including mac address. Did a quick google search and found the article:
hxxp://androidforums.com/t-mobile-g1/3506-changing-spoofing-mac-address.html
Basically you must change the file /data/misc/wifi/nvram.txt, at the end of the file is the mac addr...
Apparently it is bad to reboot with different mac... who knows. I haven't tested it.
Click to expand...
Click to collapse
Ok, i will try that method although it seems strange that the ipconfig command doesn't work :-/
It is probably the fault of the driver that ifconfig wlan0 hw ether does not work.
hello..
i've been trying to get openvpn to work on my Defy but no luck so far.
what i've done is:
-install busybox
-install openvpn settings and installer
-found my tun.ko
-copied my openvpn config to sdcard
-changed openvpn settings
-the vpn tunnel is created and connection is made but traffic doesnt seem to be routed to the tunnel
did anyone manage to get openvpn to work on Defy?
it was working fine for me for different android devices.
i used this tutorial:
hxxp://www.android-hilfe.de/root-hacking-modding-fuer-motorola-defy/58423-openvpn-auf-dem-defy-2.html
I use the phone's own VPN settings under Wireless & Networks and manage to get things working without any problems.
tim440 said:
I use the phone's own VPN settings under Wireless & Networks and manage to get things working without any problems.
Click to expand...
Click to collapse
this is for PPTP or IPSEC but not OpenVPN.
Ohhh.... Good i found this thread, maybe you guys will be able to help me...
I have a working VPN connection from for ex. my laptop > home (PPTP)
But i am unable to connect to it using Defy's original VPN connection...
I get:
"Unable to connect to the network. Do you want to try again?"
Also - what does mean this "DNS Search Domains " setting?
Darmach said:
Ohhh.... Good i found this thread, maybe you guys will be able to help me...
I have a working VPN connection from for ex. my laptop > home (PPTP)
But i am unable to connect to it using Defy's original VPN connection...
I get:
"Unable to connect to the network. Do you want to try again?"
Also - what does mean this "DNS Search Domains " setting?
Click to expand...
Click to collapse
what ROM are you using? on 2.2.1 L2TP works fine but not PPTP.
your options:
1. try L2TP or L2TP/IPSEC if your provider supports it
2. if your on a 2.1 ROM, try a 2.2.1 ROM
as for DNS search domains, you can put google's for example 8.8.8.8
or leave it blank if after connection is successful you can browse without problems.
Im on 2.1 - so its just that that on 2.1 PPTP is not working?
So DNS search domain are just specifying the DNS'es you will be using on this connection?
Darmach said:
Im on 2.1 - so its just that that on 2.1 PPTP is not working?
So DNS search domain are just specifying the DNS'es you will be using on this connection?
Click to expand...
Click to collapse
1. Yes, at least for me.
2. correct
does anyone here still need help with openvpn?
i managed to run openvpn through a dns tunnel over a public hotspot at the airport.
this works on most of the newer (hotspot)systems but is extremely slow.
i got it working, i will post the steps later on.
nolimitzz said:
i got it working, i will post the steps later on.
Click to expand...
Click to collapse
Hi,
Having the same issue as you.. My OpenVPN Connects but no unable to ping even the IP address.. Same Config ovpn file is working on previous phones. Please kind share you workaround . Thanks in advance
voided said:
Hi,
Having the same issue as you.. My OpenVPN Connects but no unable to ping even the IP address.. Same Config ovpn file is working on previous phones. Please kind share you workaround . Thanks in advance
Click to expand...
Click to collapse
Found the solution! here u go!
1. install openvpn-installer
2. Run openvpn-installer and during installation point to busybox (ifconfig/route) at at /system/xbin/bb
3. create the directory at /system/xbin/bb
Code:
mkdir /system/xbin/bb
4. Make symbolic links to ifconfig and route
Code:
ln -s /system/xbin/ifconfig /system/xbin/bb/ifconfig
ln -s /system/xbin/route /system/xbin/bb/route
enjoy~!
1) Install busybox using busybox installer from market, choose to install busybox in:
/system/bin
(dont install in /system/xbin , if already installed, please delete route and ifconfig in /system/xbin first very importanttttt)
Install Openvpn from Openvpn Installer in /system/xbin
using root explorer or whatever you use, replace openvpn binary with this:
http://github.com/downloads/fries/android-external-openvpn/openvpn-static-2.1.1.bz2
dont forget to change the permissions
using adb or terminal emulator:
Code:
su
mount -o rw,remount /dev/block/mmcblk1p21 /system
ln -s /system/bin/route /system/xbin/route
ln -s /system/bin/ifconfig /system/xbin/ifconfig
mkdir /system/xbin/bb
ln -s /system/xbin /system/xbin/bb
use openvpn settings to set your options (insmod for tun.ko, tun.ko location, openvpn location)
my main problem, which i dont know why, was because busybox is installed in system/xbin, while it should be installed in system/bin and then using symlink to system/xbin
anyway it works for me now, let me know if it does for you.
did you install busybox to /system/xbin/?
did you create /system/xbin/bb? and symlink route and ifconfig to that folder?
i hope you guys can post step by step tutorial here .. this is my first android phone ...
thanks !
Hi,
so after few days of playing with drivers patches kernel sources i finally got aircrack-ng working on g1 ! ( If you dont know whats aircrack-ng http://www.aircrack-ng.org/) I tested airodump for 1h, had it dumping packets to the sdcard to a cap file with channel switching and aireplay with deauth attack. I monitored this from my laptop to see if the packets are being sent ok and the client was disconnected from the network as expected.
I used patches for the n900 form the "download here" link at the bottom of this page http://david.gnedt.eu/blog/wl1251/. I also followed this tutorial http://bobcopeland.com/android_wifi.html and used his excellent kernel patch to get the msm_wifi.ko module. I then used the kernel and the zip file herehttp://forum.xda-developers.com/showpost.php?p=14768272&postcount=2427
You will want to make a backup of your system before you do anything. With that kernel you won't be able to use wifi in the Android UI.
Requirements to use attached files:
2.2 Rom
Debian installed in chroot on g1 with aircrack-ng installed ( you can use this img http://www.mediafire.com/?0ab95ia8xbale0i , just extract in on /sdcard/ so debian.img path is /sdcard/debian/debian.img )
How to make it work ?
steps 1-5 are one time only
First boot your android ROM and type
adb shell
$ su
# mount -o remount,rw /
# cd /system/etc/firmware
# ln -s ../wifi/Fw1251r1c.bin wl1251-fw.bin
# cat /proc/calibration > wl1251-nvs.bin
# mount -o remount,ro /
Click to expand...
Click to collapse
Extract attached files ( g1_wl1251.zip ) to sdcard
Apply ez_1.5.1_wl1251.signed.zip from recovery ( it got 2708 and ebi0 kernel for now will add ebi1 later)
Boot the phone
adb shell
su
cd /sdcard/wl1251_modules
sh ../insmod.sh
Click to expand...
Click to collapse
Now chroot into you debian installation ( if you used mine debian.tar.bz2 there is script startdeb just write: sh /sdcard/debian/startdeb and you should be chrooted correctly )
screen ( dont know why airodump doesnt give any output without screen on adb shell ?! )
bash
airmon-ng start wlan0
airodump-ng -i mon0
and DONE
How com compile it
First you need to get sources:
kernel sources i used https://github.com/ezterry/kernel-biff-testing tag ezgb-2636-v1.5.1-20110820
prepatched compat-wireless-2010-12-22 ( attached in sources.zip. I did some small build fixes and applied every patch from wl1251-maemo/patches/wireless-testing/ EXCEPT 0003-wl1251-fix-scan-behaviour-while-not-associated.patch as i got build errors with it )
rest of the files in patches.zip
Kernel:
You can just apply all patches in the kernel dir
If you want to make your config by yourself you have to compile as module cfg80211 and mac80211, compile in CONFIG_RFKILL_PM, CONFIG_CRC7 and UNSET CONFIG_TIWLAN1251. Its important as there as some ifdefs for CONFIG_TIWLAN1251 in drivers/mmc/core/core.c which is compiled in and with CONFIG_TIWLAN1251 WL1251 drivers doesnt work !
Compat wireless:
there is make.sh script edit it and change the patchs for your crosscompile toolchain and kernel location
./make.sh
and copy all *.ko modules
I hope everything is clear and more ppl can use it in custom roms If something is unclear plz write about it
too bad i sold my g1!
Thank you for the great tutorial! I think many people are using Gingerbread right now with several different incompatible ROMs. I think it would be useful if you list your ROM version as well as SPL & Radio info. Also if you could PLEASE make an image of your G1 with the debian install, it would help a lot. If you don't want your personal data in the image then I can remove it for you and will host the image. At the very least people need to know how exactly you installed debian before attempting this.
Please PM me if you can supply the image, thanks again!
Debian location can by anywhere, nothing depends on it and i got it on sdcard so g1 dump wont do anything. But i can send u ready debian.img to mount it with wireless tools installed just want to add new kismet and as i cant find ready deb for debian i would need to compile it probably. As for the radio u can use that new 2708 radio and old one for kernel i provided. I used cm6 for it but i think you can use any 2.2 rom as its froyo kernel. I need to clean up everything and redo it to write good tutorial how to compile it for any kernel and how to patch drivers.
zewelor said:
Debian location can by anywhere, nothing depends on it and i got it on sdcard so g1 dump wont do anything. But i can send u ready debian.img to mount it with wireless tools installed just want to add new kismet and as i cant find ready deb for debian i would need to compile it probably. As for the radio u can use that new 2708 radio and old one for kernel i provided. I used cm6 for it but i think you can use any 2.2 rom as its froyo kernel. I need to clean up everything and redo it to write good tutorial how to compile it for any kernel and how to patch drivers.
Click to expand...
Click to collapse
Thanks for the response. I just upgraded my hboot to a version that CM6 doesn't support, but I can use a different Froyo ROM that is still working.
On Gingerbread I am having a very hard time getting ext2.ko loaded. I already have an EXT(4) partition mounted, but since I am not on Froyo none of the kernel modules can be loaded correctly. I also think that ext2 support is already there but I don't know how to make use of it. There are filesystem modules under /system/lib/modules/2.6.36.4-s3-cos/.
My goal is to create a clockwork image of a Froyo/Debian install (with working injection driver) and use it as needed while keeping a 2.3.4/2.3.5 Android image for testing newer Apps that don't work on 2.2.
For anyone that just needs the Debian image, you can download it from the original G1 Debian tut site here: http://www.saurik.com/id/10
Please PM me if you are willing to upload a copy of your .img container file & I will host it for everyone to use. Thanks!
If u want u can still flash cm6 and after flashing it, flash kernel.zip from attached zip in 1st post ( it got also kernel for newer radio, but i havent tested it as i got older radio). As i saw in ezterry's kernel config ext2 partitions are mounted using ext4 so u dont have to load ext2 ( it works at least in froyo version of ezterry's kernel ). I can send now debian.img without working kismet but i think its better to get also kismet running so ppl wont have to redownload it. My debian.img its normal debian only with aircrack-ng installed nothing special in it. Only magic is kernel config and modules with patches compiled for that kernel thats it nothing more.
zewelor said:
If u want u can still flash cm6 and after flashing it, flash kernel.zip from attached zip in 1st post ( it got also kernel for newer radio, but i havent tested it as i got older radio). As i saw in ezterry's kernel config ext2 partitions are mounted using ext4 so u dont have to load ext2 ( it works at least in froyo version of ezterry's kernel ). I can send now debian.img without working kismet but i think its better to get also kismet running so ppl wont have to redownload it. My debian.img its normal debian only with aircrack-ng installed nothing special in it. Only magic is kernel config and modules with patches compiled for that kernel thats it nothing more.
Click to expand...
Click to collapse
Yes, let's wait until Kismet is working and then you can upload the image. I will try your suggestion and use EXT4. If I still have trouble I will create a flashable ZIP that has Froyo optimized for Debian with your Kernel patch included and a startup app to launch Debian via UI. Thanks again for your great contribution!
But when you mount debian img just write mount -o loop -t ext2 not ext4 it should work
Updated first post with some instructions how to compile drivers and kernel
Constantly getting "mount: can't setup loop device: No such file or directory"
I tried "mknod /dev/loop0 b 7 0" but neither "mount -o loop,noatime /mnt/sdcard/debian.img /data/local/mnt" nor other variations using ext2 work. I did mount / as rw and created the /data/local/mnt directory. I also tried 2 versions of busybox and so far no luck; I guess you are using the version that comes with CM6? Thanks
Yes i used busybox from cyanogenmod
Copy debian.img to /sdcard/debian/debian.img ( or change location in startdeb script )
First do mkdir -p /data/local/debian/mnt
then sh /sdcard/debian/startdeb ( or where u got it )
startdeb script i used:
#!/system/bin/sh
if [ ! -e /dev/block/loop99 ]
then
mknod -m 660 /dev/block/loop99 b 7 99
fi
if [ ! -e /dev/loop1 ]
then
ln /dev/block/loop99 /dev/loop0
fi
mount -o loop -t ext2 /sdcard/debian/debian.img /data/local/debian/mnt
busybox mount -o bind /sdcard /data/local/debian/mnt/sdcard
export PATH=/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
export USER=root
busybox mount -t proc none /data/local/debian/mnt/proc
busybox mount -t sysfs sysfs /data/local/debian/mnt/sys
busybox mount -t devpts devpts /data/local/debian/mnt/dev/pts
busybox chroot /data/local/debian/mnt/ /bin/bash
Click to expand...
Click to collapse
can u do it for lg optimus black ?
That depends on wifi chipset there, if its wl1251 it should be doable.
nice work, a year ago I did the same work (I think I posted it in the modaco android forum), however there was no injection patch at that time, so only packet capturing worked. The HTC Hero has the same TI wifi chip (wl1251). By the way you don't need an entire linux environment it is sufficient to compile static binaries (aircrack, kismet..). If i remember correctly compiling aircrack was very straight forward, however for kismet I had to make a dirty hack because it complained for a missing environment variable, but int he end Kismet worked fine too, even the gps . Unfortunately I lost my dev environment due to a harddisk failure, otherwise I would share the patches and binaries.
[EDIT]
HA! I found the aircrack binaries on an old backup disc
If you want to copy the files on your sdcard remember to remount it with (mount -o,exec,remount /mnt/scard), because by default the noexec flat is set or you copy the files to internal memory.
Thx for that aircrack I have chosen debian to avoid recompiling everything i will like to use and to have normal command line enviroment. Except aircrack and kismet u can also like to have iw / wireless tools / ping / nmap /tcpdump etc so you will have to search for it or recompiling staticly everything. I just prefer to find .deb file and install it, as using apt-get on g1 takes forever Also htc magic got wl1251 as afaik its the same as g1 (?).
yeah thats true, I decided to compile everything statically because I had very poor performance using debian (apt-get, compiling stuff etc), another advantage is you can start the programs very easily from the homescreen using gscript, sl4a..., in the end its just a question of preference
Sorry for asking in wrong topic, but:
Is there any airdump app that works well on HD2 ? (Broadcom chip: bmc 4329).
Or maybe the right question is : If it is even possible to create such app for hd2/nexus ?
misieq666 said:
Sorry for asking in wrong topic, but:
Is there any airdump app that works well on HD2 ? (Broadcom chip: bmc 4329).
Or maybe the right question is : If it is even possible to create such app for hd2/nexus ?
Click to expand...
Click to collapse
The problem is not the app, the problem is having wireless driver that support packet injection/Promiscuous-mode for the specific wireless chip, which in this case are afaik not available.
And even not a driver but firmware for specific chipset that allow to do that. As i read the main problem in bmc4329 is the firmware as driver can only do what firmware will allow. Well u can rewrite driver to workaround some limitations in firmware etc. Anyway here is a page u can follow http://linuxwireless.org/en/users/Drivers/brcm80211 they even got monitor mode in todo so maybe it can be done
Hi guy, final step, I got this:
airmon-ng start wlan0
Interface Chipset Driver
wlan0 wl1251_sdio - [phy0]SIOCSIFFLAGS: No such file or directory
(monitor mode enabled on mon0)
Click to expand...
Click to collapse
and this:
airodump-ng mon0
ioctl(SIOCSIFFLAGS) failed: No such file or directory
Click to expand...
Click to collapse
how should i fix this? plz.
Thank you.
Hey all,
I'm trying to spoof my MAC address on the Galaxy Ace, though nothing seems to be working. [Details and attempts listed below]
Phone Details:
Samsung Galaxy Ace GT-S5830
OS: Stock Gingerbread 2.3.5
Rooted
Installed Software:
Superuser
ES File Explorer (with show hidden (. prefix) files turned on & up to root enabled, root R/W)
Busybox (Free)
Android Terminal Emulator
(all with Superuser permissions)
What I've tried:
First I cleared the phone's IP DCHP lease in the router.
In Terminal on the phone whist not connected to a network, but wifi turned on I:
su
ifconfig wlan0 down
ifconfig wlan0 hw ether 112233445566
ifconfig wlan0 up
iplink show wlan0
Click to expand...
Click to collapse
also tried
su
ifconfig wlan0 down
iplink set wlan0 address 11:22:33:44:55:66
-->At which point I get (even with busybox prefixed)
iplink: SIOCSIFHWADDR: Operation not supported
Click to expand...
Click to collapse
The first code I quoted gave me no errors and appeared to execute successfully, but iplink show wlan0, the router (once the phone had connected), and several other tools (to see if ANY could see the change) also displayed the phone's default MAC.
(I also tired: ifconfig wlan0 hw link 112233445566, offsetting the existing MAC by only 1, and prefixing commands with busybox - busybox ifconfig wlan0 hw ether 112233445566 -resulted in ifconfig: SIOCSIFHWADDR: Operation not supported)
Looking for /data/misc/wifi/nvram.txt. Can see /data/misc/wifi/nvram.info containing my MAC. Have edited this and tried joining network again, but no MAC change is showing. Have read it's a rather bad idea to restart the phone before changing the MAC in files back, [Why?] so am yet to do a restart to test the file change...
Various apk tools (preceded by clearing DHCP lease for phone's IP & proceeded by checking router & iplink show wlan0) including:
Wireless MAC Changer - Osama Abukmail
Mac Address Ghost - diewland
MAC Spoofer for HD2 - Ian Kim (as the description stated although for a HD2, there was a change it may work for other types [later found out mine doesn't use/have /system/etc/calibration])
(all with super permissions)
Does anyone know of, or have any other ideas that may work?
Is this possible with only Custom ROM's?
Much thanks in advance,
Blue
MAC address spoofing is a type of discussion that XDA does not allow. For that reason, thread closed.
Hi xda-mates. In this post I'm gonna show you, How to get wifi monitor mode on your device without external wifi adapter. If you don't know what is "wifi mode" goto wikipedia. The package consist from drivers, some wifi tools and aircrack.
Monitor Mode getting steps:
1. You have to root your device.
2. Flash CM 9.1.0.
3. Check out, your using originally cwm kernel included in the firmware you flashed.
4. Download my package(the password is my nickname).
5. Extract it to your sd.
6. Open up the terminal.
7. Type
Code:
su
cd pathToYourSd
sh install.sh
it will simply install all stuff to your system.
8. Type 'wmon on' in the terminal to activate monitor mode (type 'wmon off' to activate managed mode).
That's all. You have installed all that you needed, activated monitor mode and now you can use aircrack.
Troubleshooting:
Problem:
Code:
cannot find wireless tools, exiting!
Solution:
a) You must execute wifi tools (aircrack also) from root directory!
Code:
cd /
b) Check out of iwconfig, iwmulticall, iwpriv existance in /data/local/bin/.
Problem:
Code:
insmod: can't insert 'dhd.ko': invalid module format
error: SIOCGIFFLAGS (No such device)
Solution:
a) Make sure you are in supported rom and kernel.
b) Check out the file existance in /data/wmon/ (3 file).
Credits:
Aspartame21
Omri Ildis
Ruby Feinstein
Yuval Ofir
MemoryController
Could this possibly work on the Sprint Galaxy S2?
Sent from my SPH-D710 using xda premium
Mattix724 said:
Could this possibly work on the Sprint Galaxy S2?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
May be but I don't know exactly. Try to istall it. I'll help you.
GREAT!
Thanks man! i was waiting for someone to go into this much detail, but does the wmon siyah mean that i can dualboot CM 9 and w/e rom ( in my case alliance) and get this to work? my problem with this before is that nothing would happen after my wifi is disabled and module is "loaded", also what do you mean run aircrack from the root dir? like root of the sd?
P.S. Testing now on the Galaxy S2 LTE version ( Rogers)
tutchthesky7 said:
Thanks man! i was waiting for someone to go into this much detail, but does the wmon siyah mean that i can dualboot CM 9 and w/e rom ( in my case alliance) and get this to work? my problem with this before is that nothing would happen after my wifi is disabled and module is "loaded", also what do you mean run aircrack from the root dir? like root of the sd?
P.S. Testing now on the Galaxy S2 LTE version ( Rogers)
Click to expand...
Click to collapse
I get suck after airmon-ng wlan0
says cannot find wireless tools, exiting!
Some help please and thanks?
tutchthesky7 said:
I get suck after airmon-ng wlan0
says cannot find wireless tools, exiting!
Some help please and thanks?
Click to expand...
Click to collapse
Use iwconfig wlan0 instead of airmon-ng wlan0. And make sure that you are in the root directory.
Code:
su
cd /
wmon on
iwconfig wlan0
iwconfig wlan0
aspartame21 said:
Use iwconfig wlan0 instead of airmon-ng wlan0. And make sure that you are in the root directory.
Code:
su
cd /
wmon on
iwconfig wlan0
Click to expand...
Click to collapse
OK thank you!, i'll give that a shot and post back!
Nada
aspartame21 said:
Use iwconfig wlan0 instead of airmon-ng wlan0. And make sure that you are in the root directory.
Code:
su
cd /
wmon on
iwconfig wlan0
Click to expand...
Click to collapse
# wmon on
Original module loaded. disabling wifi
LOADING MODULE
insmod: cant insrt dhd.ko : file exists error : SI0CIFFLAGS (no such device)
then i tried iwconfig wlan0
wlan0 No such device
so i checked iwconfig to see whats up
and my Wlan0 isn't there.. hmmm
Edit: I typed in wmon on and it responded with LOADING MODULE, then i did iwconfig wlan0 and it showed it in manage mode, what next?
tutchthesky7 said:
# wmon on
Original module loaded. disabling wifi
LOADING MODULE
insmod: cant insrt dhd.ko : file exists error : SI0CIFFLAGS (no such device)
then i tried iwconfig wlan0
wlan0 No such device
so i checked iwconfig to see whats up
and my Wlan0 isn't there.. hmmm
Edit: I typed in wmon on and it responded with LOADING MODULE, then i did iwconfig wlan0 and it showed it in manage mode, what next?
Click to expand...
Click to collapse
Don't pay attention to "managed mode" lettering, you are in monitor mode. To test monitor mode working type 'airodump-ng wlan0' and you will see that everything works perfect.
errrm.. not QUIIITEE, it says cannot find wireless tools, exiting. then it deletes all the files i extracted
IT IS WORK! one little question
THIS WORK, first, and ofc, THX man
I had a sgs2(official), rooted in gingerbread, and then i flashed ICS with CM 9.1, then i folllow yours steps, y putted my sgs2 in mode monitor and i checked.
Just one question, i searched in google, and ask in IRC, but i don't find the answer:
¿Do can i use the same steps to get WPA as Ubuntu or Backtrack? else... ¿do you know some link where a tutorial get wpa via sgs2?
I want complete the last step, thx for your time, and sry for my english
Clitoris Errante said:
THIS WORK, first, and ofc, THX man
I had a sgs2(official), rooted in gingerbread, and then i flashed ICS with CM 9.1, then i folllow yours steps, y putted my sgs2 in mode monitor and i checked.
Just one question, i searched in google, and ask in IRC, but i don't find the answer:
¿Do can i use the same steps to get WPA as Ubuntu or Backtrack? else... ¿do you know some link where a tutorial get wpa via sgs2?
I want complete the last step, thx for your time, and sry for my english
Click to expand...
Click to collapse
You can use all stuff like in ubuntu/bt.
Mode inyecction?
Thx for answer me, i did decide install another time backtrack in my sgs2(i removed ), but i want crack wpa without brute force or diccionaries, because it is imposible.
¿Is there some way to crack a wpa without brute force or diccionaries? ¿Do i could implement rainbow tables in sgs2, or is there some way to hashing with aircrack?
Thx for your time,
Clitoris Errante said:
Thx for answer me, i did decide install another time backtrack in my sgs2(i removed ), but i want crack wpa without brute force or diccionaries, because it is imposible.
¿Is there some way to crack a wpa without brute force or diccionaries? ¿Do i could implement rainbow tables in sgs2, or is there some way to hashing with aircrack?
Thx for your time,
Click to expand...
Click to collapse
Aircrack-ng is included to the package you installed. Just type aircrack-ng after switching wifi monitor mode
from a day to other, i can't use this
i didn't use somedays, and now i can't use, it is appears as delete, or simplely, not work. I did install applications in my sgs2.
But now i can't run it. I tried reinstall, but always put in the output:
"wmon on" not found
"wmod on" not found
"wmod monitor" not found
i did that in /, and i executed the install.sh in sdcard as you said in your post.
In internet i not found nothing, and i know programming bash a little, i tried solved gave wmon bit executable but is useless, i follow all steps rights as you said. The only one thing interesant when i execute install that is the output:
Installing Driver...
OK
Installing Utils...
OK
Creating Symlink...
link failed FIle exists
link failed File exists
//I think here is the fail of my steps, i think that make reference to /data/wmon, but i am not sure, i checked that files, but i can't solved
OK
Fixing Permissions...
OK
Temporary FIles Cleaning...
OK
Installation COmpleted! To start WiFi monitor mode just type : "wmod monitor"
I am sry if i am heavy, thx for your time.
This is pretty cool, I managed to make some progress, however got error at authorization stage at line:
aireplay-ng -1 0 -a MAC wlan0
Waiting for beacon frame (BSSID: .......) on channel -1
Couldn't determine current channel for wlan0, you should either force the operation with --ignore-negative-one or apply kernel patch
same error with injection
I'm pretty new to linux stuff, is there any way to bypass this?
Another thing is that I can't use wi-fi after using monitor mode, even if i shut it down (wmon off) until phone restart, is that alright?
Thanks in advance, and keep doing the great job!
Clitoris Errante said:
i didn't use somedays, and now i can't use, it is appears as delete, or simplely, not work. I did install applications in my sgs2.
But now i can't run it. I tried reinstall, but always put in the output:
"wmon on" not found
"wmod on" not found
"wmod monitor" not found
i did that in /, and i executed the install.sh in sdcard as you said in your post.
In internet i not found nothing, and i know programming bash a little, i tried solved gave wmon bit executable but is useless, i follow all steps rights as you said. The only one thing interesant when i execute install that is the output:
Installing Driver...
OK
Installing Utils...
OK
Creating Symlink...
link failed FIle exists
link failed File exists
//I think here is the fail of my steps, i think that make reference to /data/wmon, but i am not sure, i checked that files, but i can't solved
OK
Fixing Permissions...
OK
Temporary FIles Cleaning...
OK
Installation COmpleted! To start WiFi monitor mode just type : "wmod monitor"
I am sry if i am heavy, thx for your time.
Click to expand...
Click to collapse
I've to correct my scripts, but don't wait for it. Just type "export PATH=/data/local/bin:$PATH". You can also add this to your terminal emulator as launch commands or create a script in autostart folder:
Code:
su
cd /system/etc/init.d/
touch 17env
echo "#!/system/bin/sh\nexport PATH=/data/local/bin:$PATH\nexit 0" > 21env
makslll said:
This is pretty cool, I managed to make some progress, however got error at authorization stage at line:
aireplay-ng -1 0 -a MAC wlan0
Waiting for beacon frame (BSSID: .......) on channel -1
Couldn't determine current channel for wlan0, you should either force the operation with --ignore-negative-one or apply kernel patch
same error with injection
I'm pretty new to linux stuff, is there any way to bypass this?
Another thing is that I can't use wi-fi after using monitor mode, even if i shut it down (wmon off) until phone restart, is that alright?
Thanks in advance, and keep doing the great job!
Click to expand...
Click to collapse
I use "aireplay-ng -2 -b VICTIM -h FAKEDMAC wlan0"
aspartame21 said:
I've to correct my scripts, but don't wait for it. Just type "export PATH=/data/local/bin:$PATH". You can also add this to your terminal emulator as launch commands or create a script in autostart folder:
Code:
su
cd /system/etc/init.d/
touch 17env
echo "#!/system/bin/sh\nexport PATH=/data/local/bin:$PATH\nexit 0" > 21env
Click to expand...
Click to collapse
Where is this Terminal autostart folder? Also, I tried executing the first command and it gave me nothing but a "> " line. What should I do?
Hi guy,
first of all, thanks for your great job.
I've seen as you have uploaded a wmon_siyah4.5.1 version... does it work with that siyah version?
I have that kernel (and that version), and I get the error:
Code:
insmod: can't insert 'dhd.ko': invalid module format
error: SIOCGIFFLAGS (No such device)
just after run 'wmon on'.
Can you help me, please?
thanks