Hi xda-mates. In this post I'm gonna show you, How to get wifi monitor mode on your device without external wifi adapter. If you don't know what is "wifi mode" goto wikipedia. The package consist from drivers, some wifi tools and aircrack.
Monitor Mode getting steps:
1. You have to root your device.
2. Flash CM 9.1.0.
3. Check out, your using originally cwm kernel included in the firmware you flashed.
4. Download my package(the password is my nickname).
5. Extract it to your sd.
6. Open up the terminal.
7. Type
Code:
su
cd pathToYourSd
sh install.sh
it will simply install all stuff to your system.
8. Type 'wmon on' in the terminal to activate monitor mode (type 'wmon off' to activate managed mode).
That's all. You have installed all that you needed, activated monitor mode and now you can use aircrack.
Troubleshooting:
Problem:
Code:
cannot find wireless tools, exiting!
Solution:
a) You must execute wifi tools (aircrack also) from root directory!
Code:
cd /
b) Check out of iwconfig, iwmulticall, iwpriv existance in /data/local/bin/.
Problem:
Code:
insmod: can't insert 'dhd.ko': invalid module format
error: SIOCGIFFLAGS (No such device)
Solution:
a) Make sure you are in supported rom and kernel.
b) Check out the file existance in /data/wmon/ (3 file).
Credits:
Aspartame21
Omri Ildis
Ruby Feinstein
Yuval Ofir
MemoryController
Could this possibly work on the Sprint Galaxy S2?
Sent from my SPH-D710 using xda premium
Mattix724 said:
Could this possibly work on the Sprint Galaxy S2?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
May be but I don't know exactly. Try to istall it. I'll help you.
GREAT!
Thanks man! i was waiting for someone to go into this much detail, but does the wmon siyah mean that i can dualboot CM 9 and w/e rom ( in my case alliance) and get this to work? my problem with this before is that nothing would happen after my wifi is disabled and module is "loaded", also what do you mean run aircrack from the root dir? like root of the sd?
P.S. Testing now on the Galaxy S2 LTE version ( Rogers)
tutchthesky7 said:
Thanks man! i was waiting for someone to go into this much detail, but does the wmon siyah mean that i can dualboot CM 9 and w/e rom ( in my case alliance) and get this to work? my problem with this before is that nothing would happen after my wifi is disabled and module is "loaded", also what do you mean run aircrack from the root dir? like root of the sd?
P.S. Testing now on the Galaxy S2 LTE version ( Rogers)
Click to expand...
Click to collapse
I get suck after airmon-ng wlan0
says cannot find wireless tools, exiting!
Some help please and thanks?
tutchthesky7 said:
I get suck after airmon-ng wlan0
says cannot find wireless tools, exiting!
Some help please and thanks?
Click to expand...
Click to collapse
Use iwconfig wlan0 instead of airmon-ng wlan0. And make sure that you are in the root directory.
Code:
su
cd /
wmon on
iwconfig wlan0
iwconfig wlan0
aspartame21 said:
Use iwconfig wlan0 instead of airmon-ng wlan0. And make sure that you are in the root directory.
Code:
su
cd /
wmon on
iwconfig wlan0
Click to expand...
Click to collapse
OK thank you!, i'll give that a shot and post back!
Nada
aspartame21 said:
Use iwconfig wlan0 instead of airmon-ng wlan0. And make sure that you are in the root directory.
Code:
su
cd /
wmon on
iwconfig wlan0
Click to expand...
Click to collapse
# wmon on
Original module loaded. disabling wifi
LOADING MODULE
insmod: cant insrt dhd.ko : file exists error : SI0CIFFLAGS (no such device)
then i tried iwconfig wlan0
wlan0 No such device
so i checked iwconfig to see whats up
and my Wlan0 isn't there.. hmmm
Edit: I typed in wmon on and it responded with LOADING MODULE, then i did iwconfig wlan0 and it showed it in manage mode, what next?
tutchthesky7 said:
# wmon on
Original module loaded. disabling wifi
LOADING MODULE
insmod: cant insrt dhd.ko : file exists error : SI0CIFFLAGS (no such device)
then i tried iwconfig wlan0
wlan0 No such device
so i checked iwconfig to see whats up
and my Wlan0 isn't there.. hmmm
Edit: I typed in wmon on and it responded with LOADING MODULE, then i did iwconfig wlan0 and it showed it in manage mode, what next?
Click to expand...
Click to collapse
Don't pay attention to "managed mode" lettering, you are in monitor mode. To test monitor mode working type 'airodump-ng wlan0' and you will see that everything works perfect.
errrm.. not QUIIITEE, it says cannot find wireless tools, exiting. then it deletes all the files i extracted
IT IS WORK! one little question
THIS WORK, first, and ofc, THX man
I had a sgs2(official), rooted in gingerbread, and then i flashed ICS with CM 9.1, then i folllow yours steps, y putted my sgs2 in mode monitor and i checked.
Just one question, i searched in google, and ask in IRC, but i don't find the answer:
¿Do can i use the same steps to get WPA as Ubuntu or Backtrack? else... ¿do you know some link where a tutorial get wpa via sgs2?
I want complete the last step, thx for your time, and sry for my english
Clitoris Errante said:
THIS WORK, first, and ofc, THX man
I had a sgs2(official), rooted in gingerbread, and then i flashed ICS with CM 9.1, then i folllow yours steps, y putted my sgs2 in mode monitor and i checked.
Just one question, i searched in google, and ask in IRC, but i don't find the answer:
¿Do can i use the same steps to get WPA as Ubuntu or Backtrack? else... ¿do you know some link where a tutorial get wpa via sgs2?
I want complete the last step, thx for your time, and sry for my english
Click to expand...
Click to collapse
You can use all stuff like in ubuntu/bt.
Mode inyecction?
Thx for answer me, i did decide install another time backtrack in my sgs2(i removed ), but i want crack wpa without brute force or diccionaries, because it is imposible.
¿Is there some way to crack a wpa without brute force or diccionaries? ¿Do i could implement rainbow tables in sgs2, or is there some way to hashing with aircrack?
Thx for your time,
Clitoris Errante said:
Thx for answer me, i did decide install another time backtrack in my sgs2(i removed ), but i want crack wpa without brute force or diccionaries, because it is imposible.
¿Is there some way to crack a wpa without brute force or diccionaries? ¿Do i could implement rainbow tables in sgs2, or is there some way to hashing with aircrack?
Thx for your time,
Click to expand...
Click to collapse
Aircrack-ng is included to the package you installed. Just type aircrack-ng after switching wifi monitor mode
from a day to other, i can't use this
i didn't use somedays, and now i can't use, it is appears as delete, or simplely, not work. I did install applications in my sgs2.
But now i can't run it. I tried reinstall, but always put in the output:
"wmon on" not found
"wmod on" not found
"wmod monitor" not found
i did that in /, and i executed the install.sh in sdcard as you said in your post.
In internet i not found nothing, and i know programming bash a little, i tried solved gave wmon bit executable but is useless, i follow all steps rights as you said. The only one thing interesant when i execute install that is the output:
Installing Driver...
OK
Installing Utils...
OK
Creating Symlink...
link failed FIle exists
link failed File exists
//I think here is the fail of my steps, i think that make reference to /data/wmon, but i am not sure, i checked that files, but i can't solved
OK
Fixing Permissions...
OK
Temporary FIles Cleaning...
OK
Installation COmpleted! To start WiFi monitor mode just type : "wmod monitor"
I am sry if i am heavy, thx for your time.
This is pretty cool, I managed to make some progress, however got error at authorization stage at line:
aireplay-ng -1 0 -a MAC wlan0
Waiting for beacon frame (BSSID: .......) on channel -1
Couldn't determine current channel for wlan0, you should either force the operation with --ignore-negative-one or apply kernel patch
same error with injection
I'm pretty new to linux stuff, is there any way to bypass this?
Another thing is that I can't use wi-fi after using monitor mode, even if i shut it down (wmon off) until phone restart, is that alright?
Thanks in advance, and keep doing the great job!
Clitoris Errante said:
i didn't use somedays, and now i can't use, it is appears as delete, or simplely, not work. I did install applications in my sgs2.
But now i can't run it. I tried reinstall, but always put in the output:
"wmon on" not found
"wmod on" not found
"wmod monitor" not found
i did that in /, and i executed the install.sh in sdcard as you said in your post.
In internet i not found nothing, and i know programming bash a little, i tried solved gave wmon bit executable but is useless, i follow all steps rights as you said. The only one thing interesant when i execute install that is the output:
Installing Driver...
OK
Installing Utils...
OK
Creating Symlink...
link failed FIle exists
link failed File exists
//I think here is the fail of my steps, i think that make reference to /data/wmon, but i am not sure, i checked that files, but i can't solved
OK
Fixing Permissions...
OK
Temporary FIles Cleaning...
OK
Installation COmpleted! To start WiFi monitor mode just type : "wmod monitor"
I am sry if i am heavy, thx for your time.
Click to expand...
Click to collapse
I've to correct my scripts, but don't wait for it. Just type "export PATH=/data/local/bin:$PATH". You can also add this to your terminal emulator as launch commands or create a script in autostart folder:
Code:
su
cd /system/etc/init.d/
touch 17env
echo "#!/system/bin/sh\nexport PATH=/data/local/bin:$PATH\nexit 0" > 21env
makslll said:
This is pretty cool, I managed to make some progress, however got error at authorization stage at line:
aireplay-ng -1 0 -a MAC wlan0
Waiting for beacon frame (BSSID: .......) on channel -1
Couldn't determine current channel for wlan0, you should either force the operation with --ignore-negative-one or apply kernel patch
same error with injection
I'm pretty new to linux stuff, is there any way to bypass this?
Another thing is that I can't use wi-fi after using monitor mode, even if i shut it down (wmon off) until phone restart, is that alright?
Thanks in advance, and keep doing the great job!
Click to expand...
Click to collapse
I use "aireplay-ng -2 -b VICTIM -h FAKEDMAC wlan0"
aspartame21 said:
I've to correct my scripts, but don't wait for it. Just type "export PATH=/data/local/bin:$PATH". You can also add this to your terminal emulator as launch commands or create a script in autostart folder:
Code:
su
cd /system/etc/init.d/
touch 17env
echo "#!/system/bin/sh\nexport PATH=/data/local/bin:$PATH\nexit 0" > 21env
Click to expand...
Click to collapse
Where is this Terminal autostart folder? Also, I tried executing the first command and it gave me nothing but a "> " line. What should I do?
Hi guy,
first of all, thanks for your great job.
I've seen as you have uploaded a wmon_siyah4.5.1 version... does it work with that siyah version?
I have that kernel (and that version), and I get the error:
Code:
insmod: can't insert 'dhd.ko': invalid module format
error: SIOCGIFFLAGS (No such device)
just after run 'wmon on'.
Can you help me, please?
thanks
Related
OpenVPN on SENSE & Buzz OC/UV 1.51Ghz 1.1.4 HOW TO
NEW UPDATE: 17/12/2010
OpenVpn.zip - FLASH IN CLOCKWORK MOD AND FOLLOW ON FROM STEP 4!!
WHAT IT DOES.
- New iptables
- New Openvpn binary
- All Symlinks created.
- All Permissions.
- Folders Created.
REQUIREMENTS:
-ROOT
-CWM-RECOVERY
-BusyBox
-OpenVpn config files, certs etc in /sdcard/openvpn
CONFIRMED WORKING ON :
-LeeDroid 1.2
-[RUU_Ace_HTC_WWE_1.32.405.6 Stock Sense Rom] - thanks to Walker Street For Testing.
Please inform me if you can confirm this working on Other ROM'S Thank you.
I AM USING ,
[KERNEL]Buzz OC/UV 1.51Ghz CFS+BFQ+SmartAss+TUN+EXT4+.27 ACE 1.1.4 [15/12/2010]
IN THEORY THIS SHOULD WORK WITH ANY SENSE ROM & KERNEL..
JUST MAKE SURE YOU THE KERNEL HAS A TUN.KO ETC CONFIGURED FOR IT.
DOWNLOAD :
http://dl.dropbox.com/u/15057375/mero01-xda/OpenVPN.zip
And a BIG thanks to ecips for helping with this
NO LONGER NEED TO DO ANY OF THIS , JUST USE OpenVPN.zip & FOLLOW ON FROM STEP 4!!
Ok guys had alot of problems gettings this too were it working, hopefully you guys might see some errors/fix's to improve on this
Requirements:
OpenVPN-Settings - Market
OpenVpn Binary File - Located in the openvpn4DesireHD.ZIP
LeeDrOiD HD v1.2 - http://forum.xda-developers.com/showthread.php?t=842802
Buzz OC/UV 1.51Ghz 1.1.4 - http://forum.xda-developers.com/showthread.php?t=835616
UPDATED 17/12/2010: CONFIRMED WORKING ON, LeeDroiD HD v1.2 & Buzz OC/UV 1.51Ghz 1.1.4
A) Not sure if this matters or not but i copied LeeDroids iptables file from the Desire.
B) Copy your client.conf or .ovpn file and certs to /sdcard/openvpn
C) Implementation:
1. Unzip/copy openvpn binary file to device.
1.b replace the current openvpn file in /system/xbin with this new one
1.c -- chmod +x with it.
Code:
adb remount
adb push openvpn /system/xbin/
adb shell
chmod +x /system/xbin/openvpn
exit
If " adb remount " didnt work
Code:
su
mount -o rw,remount -t yaffs2 /dev/block/mmcblk0p25 /system
in order to mount system as read/write
2. Make folder /system/xbin/bb
Code:
adb remount
adb shell mkdir /system/xbin/bb
exit
3. Make symbolic links to ifconfig and route & busy box.
THIS IS WERE THE PROBLEMS ALL COME FROM AND IF YOU HAVE ISSUES THIS IS WHAT WILL BE CAUSEING IT! SOMETHING TO DO WITH LINK BETWEEN BUSY BOX AND IFCONFIG......BUT I TRIED FROM FRESH BOOT AND IT WORKS FLAWLESSLY NOW WILL TALK TOO LEE ABOUT GETTING EVERYTHING INBUILT IN LEEDROID
Code:
adb remount
adb shell
ln -s /system/xbin/ifconfig /system/xbin/bb/ifconfig
ln -s /system/xbin/route /system/xbin/bb/route
ln -s /system/xbin/busybox /system/xbin/ifconfig
reboot
4. Install/Configure OpenVPN-Settings
4.0 Install OpenVPN-Settings from "Market" its free dont worrie
Code:
4.1 On device, launch OpenVPN Settings.
4.2 Long press openvpn.conf, Preferences.
4.3 Check "Use VPN DNS Server"
4.4 Enter your VPN DNS Server
4.5 Script Security Level Select Built-in + scripts
4.5 press back
4.6 Click click the sub-menu option select Advanced
4.7 Load tun kernel module and make it 'insmod /system/lib/modules/tun.ko' before starting openvpn.
7.8 Change path to openvpn binary to /system/xbin/openvpn
Click " Fix HTC Routes "
You should now be connected
IF I FORGOT ANYTHING PLS LET ME KNOW VERY TIRED WHEN I DID THIS HAHA
Here is my config anyways for reference and here is my client config
Code:
client
dev tun
proto udp
remote XXX.XXX.XXX.XX 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert mero-android.crt
key mero-android.key
comp-lzo
verb 6
script-security 2
Have also realised if you go terminal and do following gives you nice log
basicly , su root, cd to your openvpn folder location, run openvpn on your client conf
Code:
su
cd /sdcard/openvpn
openvpn client.ovpn
For added security. To make the OpenVPN request a password on connect. do the following
change step 4.5 to Script Security Level Select Built-in + scripts + passwords
add the following to your server conf.
Code:
username-as-common-name
plugin /usr/lib/openvpn/openvpn-auth-pam.so login
and this to your client
Code:
auth-user-pass
Change Log:
Use OpenVPN.zip & step 4 and beyond.
17/12/2010
DOWNLOAD:
http://dl.dropbox.com/u/15057375/mero01-xda/OpenVPN.zip
Out of curiosity, what is OpenVPN used for?
Then i will know if i have to use your spot on tutorial
no1male said:
Out of curiosity, what is OpenVPN used for?
Then i will know if i have to use your spot on tutorial
Click to expand...
Click to collapse
It's a VPN (virtual private network). I can access my home and work computers from my android.
I am super-impressed mero. But I wasn't able to get it to work .... I think it's my fault .... I've stuffed around so much. I'm right now starting a clean install.... It should work..... I hope.
Walker Street said:
I am super-impressed mero. But I wasn't able to get it to work .... I think it's my fault .... I've stuffed around so much. I'm right now starting a clean install.... It should work..... I hope.
Click to expand...
Click to collapse
thanks
I did alot of stuffing around aswell thats why i wanted to test it.
So i did a full wipe. then flash to 1.2 reboot. flash to 1.0.1.fix. and then first thing i did was follow those steps.
connection worked first go
please update me, as im sure i can help.
Walker Street,
I attached a screen shot of the actual adb session i did just incase. the bottom 3 commands to my knowledge and what i can see dont work so i ommited them from the tut. but they might do somthign and not display it so thought i might upload incase.
mero01 said:
Walker Street,
I attached a screen shot of the actual adb session i did just incase. the bottom 3 commands to my knowledge and what i can see dont work so i ommited them from the tut. but they might do somthign and not display it so thought i might upload incase.
Click to expand...
Click to collapse
Silly me. I forgot to set 'Fix HTC Routes'. Now I've done that and your method rules.
You're a genius mero. It works.
I changed permissions for the new openvpn and iptables using root explorer so they could execute. Maybe you didn't need to because you were doing adb push from linux (I was doing it from windows).
I don't have a DNS server, so I didn't need to specify one.
I would highly recommend these changes to LeeDroid for his rom. Have you messaged him yet?
Walker Street said:
Silly me. I forgot to set 'Fix HTC Routes'. Now I've done that and your method rules.
You're a genius mero. It works.
Click to expand...
Click to collapse
+1
Thank you very much
Walker Street said:
I changed permissions for the new openvpn and iptables using root explorer so they could execute. Maybe you didn't need to because you were doing adb push from linux (I was doing it from windows).
I don't have a DNS server, so I didn't need to specify one.
I would highly recommend these changes to LeeDroid for his rom. Have you messaged him yet?
Click to expand...
Click to collapse
to be honest the only part i did in adb was the symlinks did everything else in root explorer.i didnt change any permissions :S
Yes i have PM'd him, awaiting a reply
just updated to Buzz 1.0.2 , everything still works
Walker Street said:
It's a VPN (virtual private network). I can access my home and work computers from my android.
Click to expand...
Click to collapse
Yes and tunnel all your internet traffic back through the VPN encrypted in many ways
also works with buzz 1.0.8.
and after pushing the openvpn binary, you need to do chmod +x with it.
raw235 said:
also works with buzz 1.0.8.
and after pushing the openvpn binary, you need to do chmod +x with it.
Click to expand...
Click to collapse
No worries thanksss, i shall update
anyone tried with 1.1.0 ?
Hello,
i'm in trouble....
At first, i have an error when i try the adb remount command : Operation not permitted
Then i have a second message when i try to create the "bb" folder : mkdir failed for bb. Read-only file system.
I'm confused because tel is rooted, S-OFF and suped-CID. I even changed the Kernel with Buzz's one 1,2Ghz.
Did i miss something?
Thanks for your help
Lionel
EFCAugure said:
Hello,
i'm in trouble....
At first, i have an error when i try the adb remount command : Operation not permitted
Then i have a second message when i try to create the "bb" folder : mkdir failed for bb. Read-only file system.
I'm confused because tel is rooted, S-OFF and suped-CID. I even changed the Kernel with Buzz's one 1,2Ghz.
Did i miss something?
Thanks for your help
Lionel
Click to expand...
Click to collapse
hmm thats very strange... adb remount should work...
actually quite puzzled at that dunno why it wouldnt work if you do have root etc.
only other thing i can think of is have you got busybox installed ?
what state is your phone in when your trying to do this ? ie off. on, recovery mode.
Hi,
thanks for reply!
I have a branded SFR phone in France but i managed to root it and S-OFF it without problem.
I switched to another Kernel with the tun.ko file and that's all.
When i tried adb remount, the phone was ON (no recovery or anything else).
I will try in recovery mode.
Busybox is installed.
Note : impossible to connect adb while in recovery.
This seems to be the problem :
when switching kernel only, i don't change the property ro.secure because it's nested (of what i read) in the boot.img. I have a branded phone and this property is set to 1.
Is there a way to change this property without changing the whole ROM? I would llike to stay with this one.
Thanks for your advice
lionel
Ok,
switched to Leedroid 1.2 and re-changed kernel to Buzz 1,22Ghz.
This tutorial is awesome!
Thanks mero01!!!
Is there a way to use the WIFI connection instead of 3G?
EFCAugure said:
Ok,
switched to Leedroid 1.2 and re-changed kernel to Buzz 1,22Ghz.
This tutorial is awesome!
Thanks mero01!!!
Is there a way to use the WIFI connection instead of 3G?
Click to expand...
Click to collapse
no worries
yer just disable 3g and use wifi. just make sure that its not using the same wifi your openvpn server is on...
Yes, of course!
I will try from a friend's wifi this afternoon!
Thanks
lionel
I have succesfully changed wifi mac address of my optimus.
We have to just insert a line "macaddr=XX:XX:XX:XX:XX:XX" in the nvram.txt
Here is how I did it:
You require:
1.)Rooted phone.
2.)anroid sdk
1.)First pull the nvram.txt file from /etc/wl to sdcard:
in cmd(windows) goto android-sdk-windows\tools and type
adb shell
2.)Copy nvram.txt from /etc/wl to sdcard
cp /etc/wl/nvram.txt /sdcard/nvram.txt
3.) Using text editor in phone add following line at the end:
macaddr=XX:XX:XX:XX:XX:XX (replace XX:XX:.... with desired mac addr.)
4.)Save file and copy it to /etc/wl from adb shell
cp /sdcard/nvram.txt /etc/wl/nvram.txt
5.)Reboot and it is done.
To restore orignal mac address just delete the macaddr line.
Note:
1.) Tested only in stock LG rome with GNM OC kernel. In other roms or kernel the location of nvram.txt may differ according to the parameter using which driver module (wireless.ko or bcm4325.ko) just find that file and use the above process. It will work.
2.) The file cannot be edited in windows as windows has different new line character than linux. It has to be edited in some linux compactible file editor like Programmers Notepad.
y wud u wanna change ur mac?
B'Coz I can access free Internet by doing this.....
Nice one
And to change hostname? Any ideas?
I changed it, and in phone it appears to be changed. But my router doesn't say the same... Has original hostname...
Yup thats worked with me thanks for sharing
Sent from my LG-P500 using XDA App
Yea bcoz android does'nt use hostname to connect with router. I'm trying to figure out the configuration file for that.....
how to find mac address
how to find the mac address in lg optimus one???
Thats why my optimus one can not take the ip from some puplic networks??
make this thread sticky
not working on Acer Liquid E ! !!
how can I change my mac !!??!!
1st step i already duno how to do T_T
know the pull things from nvram.txt file from /etc/wl to sdcard which require me to root my phone 1st then only can pull out
but after that in cmd(windows) goto android-sdk-windows\tools and type
adb shell
my computer can't detect that was a file in computer,and what is the android-sdk ?
Screw android-sdk ..LOLz..Do this install root explorer on your phone ..navigate to that file on your phone using root explorer , click on mount r/w button ,then long press and select open in text editor, then go to the end of the file and add this
macaddr=xx:xx:xx:xx:xx:xx
replace xx with a combination of hex letter i.e. 1,2,3,4,5,6,7,8,9,A,B,C,D,E,F
example DB:12:3F:4F:11:AA
Save and exit
Reboot
You are all done check phone status in settings
sarfaraz1989 said:
Screw android-sdk ..LOLz..Do this install root explorer on your phone ..navigate to that file on your phone using root explorer , click on mount r/w button ,then long press and select open in text editor, then go to the end of the file and add this
macaddr=xx:xx:xx:xx:xx:xx
replace xx with a combination of hex letter i.e. 1,2,3,4,5,6,7,8,9,A,B,C,D,E,F
example DB:12:3F:4F:11:AA
Save and exit
Reboot
You are all done check phone status in settings
Click to expand...
Click to collapse
after root my phone using z4root/gingerbreak,then download the root explorer from here is it ??
https://market.android.com/details?id=com.speedsoftware.rootexplorer&feature=search_result
if correct navigate to which file ??
sry android newbie here T_T
How about IMEI in some other file.
Wohhh atom bomb.
Sent from my LG-P500 using XDA Premium App
arrgh need solve my wifi problem ASAP
already more than 2week can't connect wifi in my college wifi T_T
Awesome, I've been looking for this everywhere. I can verify this method also works on stock rooted LG Optimus V.
whant's next
i've been change macaddr 'but nothing happen .device not connet wifi.it sitll ask password
you said you can access free internet.
i was just curious that how?
i mean free internet from the service provider or from where???
i too want to use it.
does that mean that if there is any wifi network then i will be able to use it without any pass???
Its simple to change your wifi mac address xD
Root you phone
install busybox (market.android. com/details?id=stericson.busybox) remove the space in link
download Terminal Emulator (market.android. com/details?id=jackpal.androidterm)
in terminal emulator
type -
su
then
busybox ifconfig wlan0 down
busybox ifconfig wlan0 hw ether wlan0 xx:xx:xx:xx:xx:xx
busybox ifconfig wlan0 up
YOU'RE DONE
DONT FORGET THE THANKS BUTTON
vermilion871 said:
Root you phone
install busybox (market.android. com/details?id=stericson.busybox) remove the space in link
download Terminal Emulator (market.android. com/details?id=jackpal.androidterm)
in terminal emulator
type -
su
then
busybox ifconfig wlan0 down
busybox ifconfig wlan0 hw ether wlan0 xx:xx:xx:xx:xx:xx
busybox ifconfig wlan0 up
YOU'RE DONE
DONT FORGET THE THANKS BUTTON
Click to expand...
Click to collapse
is there a way to revert this?
I mean get back to the original hardware mac?
This is for CyanogenMod and its derivates. Stock ROMs should be fine.
If you are inrested in editing your MAC address, there's a guide linked below. I don't know if stock ROMs will automcatically correct the MAC. In this case I think you have to edit /efs/imei/.nvmac.info (read more something about /efs before playing with it!)
Click to expand...
Click to collapse
The easiest way to do the calibration is:
Turn wifi ON and run
Code:
tiwlan_plts -n
This is the script called from a oneshot init service in my init.latona.rc if someone is interested. It will calibrate and correct the MAC automatically, even after a data wipe:
Code:
#!/system/bin/sh
if [ ! -f /data/misc/wifi/nvs_map.bin ]; then
insmod /system/lib/modules/tiwlan_drv.ko
/system/bin/tiwlan_loader -i /system/etc/wifi/tiwlan.ini -f /system/etc/wifi/firmware.bin
/system/bin/tiwlan_plts -n
rmmod tiwlan_drv
fi
____________________________________
Older method
Click to expand...
Click to collapse
UPDATE: I found an easy way to get the real MAC.
Download the apk attached or run the following commands:
Code:
su
mount -o remount,rw /system
ln -s /system/lib/modules/tiwlan_drv.ko /system/etc/wifi/tiwlan_drv.ko
#Make sure wifi is off
./mfgloader -l #Take the binary from a stock ROM
./mfgloader -u
rm /system/etc/wifi/tiwlan_drv.ko
mount -o remount,ro /system
After that your MAC address shoud begin with D0:C1:B1 and not 08:00:28.
To see your current MAC: System Settings > About phone > Status (turn wifi on)
Click to expand...
Click to collapse
____________________________________
This is the first post with some more informations about the calibration
Click to expand...
Click to collapse
While I was reading some logs, I noticed these lines
Code:
TIWLAN: 1089.979242: Starting to process NVS...
TIWLAN: 1089.983698: No Nvs, Setting default MAC address
TIWLAN: 1089.989007: pHwInit->uEEPROMCurLen: 1c
TIWLAN: 1089.993462: ERROR: If you are not calibating the device, you will soon get errors !!!
...
TIWLAN: 1094.726827: Station ID : 08-00-28-12-03-58
...
You can see that the device is not calibrated and that the default MAC address is assigned.
Each device should have a unique MAC address, two devices with the same MAC address in the same network will give problems.
________
UPDATE
I made two flashable files:
wlan_calibration.zip will only do the calibration
wlan_calibration_rand.zip will do the calibration and will randomize the last three octets of the address
Click to expand...
Click to collapse
If you still want to do it on your own, here the guide:
_______________
WLAN Calibration
Here the steps you need to follow (taken from: WLAN Calibration):
1) Turn wifi off
2) From ADB/terminal emulator run the following commands [1]:
Code:
$ su
# cd /data/misc/wifi
# insmod /system/lib/modules/tiwlan_drv.ko
# start wlan_loader
# ifconfig tiwlan0 up
# tiwlan_cu -b
/ w p 1 l 2 f 2
/ t b v 21
/ t b t 1 0 0 0 0 0 0 0
/ q
# rmmod tiwlan_drv
This will create this file: /data/misc/wifi/nvs_map.bin. If it's not there, you did something wrong.
After that you should not get the error while turning wifi ON.
________
MAC address fix
Even after the calibration, you'll still have the default MAC address (Station ID : 08-00-28-12-03-58). But no problem, you can 'easly' change it: Editing the MAC Address.
You need to get the newly created /data/misc/wifi/nvs_map.bin and edit it with an hex editor as described in the guide linked above.
I still don't know if the calibration will improve anything, but it surely won't hurt:
For optimal Wi-Fi performance it is mandatory to calibrate the Wi-Fi hardware
Click to expand...
Click to collapse
NOTE: nvs_map.bin is in /data, so if you do a factory reset you have to do this again.
___
[1]
ADB: System settings > Developers options (ON) > Root access > Apps and ADB
Wow...good solution buddy. I think u shouldpost this in development thread. People dont look much in general thread.
this should be added to the cm9/10 instalation .zip file
I did flash the zip file, ran the other commands thru terminal and see the file /data/misc/wifi/nvs_map.bin.
I don't understand the next step to be done.
I cannot open the bin file using hexeditor, I gave it root access.
And, in case i open it what mac address should i use? Is some address hard coded to each phone?
Hetalk said:
I did flash the zip file, ran the other commands thru terminal and see the file /data/misc/wifi/nvs_map.bin.
I don't understand the next step to be done.
I cannot open the bin file using hexeditor, I gave it root access.
And, in case i open it what mac address should i use? Is some address hard coded to each phone?
Click to expand...
Click to collapse
I don't know how MAC are assigned, I simply randomized the last part of the address (I kept the first part: 80:00:28).
Anyway I just uploaded a new zip file to make things even simpler. It will automatically randomize the last four three groups. If you want to use it, you need to delete /data/misc/wifi/nvs_map.bin first. EDIT: I changed the script, now you can do the calibration without removing the file.
Anyway I don't know what's wrong with your editor, I did it from my computer.
I tried using hex editor from play store.
I'll try the new zip tomorrow..
As I wrote in the OP, today I found the way to get the original MAC.
I don't know what is needed to make the commands work while in recovery (services needed etc...), so I made a dummy app (I simply adapted the code of an app I made few days ago to do a similar thing).
No fancy icon (it's the default one), no checks, ugly etc... It simply does the job (my Java knowledge is almost zero)
EDIT:
I almost forgot to say that the real MAC is in /efs/imei/.nvmac.info. It was the first place where I looked, but it's an hidden file an I didn't see at first.
bam....
Dear @loSconosciuto
I following this guide to solve the problem that actually I have in my phone with CM 11. In the Status menu, "non available" appears in my device WIFI mac. I following the guide step by step and I couldn't change it.
Could you help me?
carniman78 said:
Dear @loSconosciuto
I following this guide to solve the problem that actually I have in my phone with CM 11. In the Status menu, "non available" appears in my device WIFI mac. I following the guide step by step and I couldn't change it.
Could you help me?
Click to expand...
Click to collapse
This guide is for the kernel 2.6.35 which uses a completely different driver, it's quite an old thread. The calibration is done in a different way and I don't think that's the problem.
I'm not using CM11, so it's quite hard for me to know exactly what's wrong.
loSconosciuto said:
This guide is for the kernel 2.6.35 which uses a completely different driver, it's quite an old thread. The calibration is done in a different way and I don't think that's the problem.
I'm not using CM11, so it's quite hard for me to know exactly what's wrong.
Click to expand...
Click to collapse
Ok, sir. Thank you for your help.
Hi there
trying to fix Samsung s4 active i9295 wifi problem. at least got the MAC address showing (was 02:lots of zeroes) still unable to start wifi. is there anything else I should search for? tiwlan_drv.ko was not there so I downloaded it sepparately. do I need some more modules to be added? using stock 4 file engineering FW Android 5.0.1
Has anyone tested if it works on our tab or not....Plus does anyone know ho to find the power output of our tab's usb host mode????
I'll be geting my new usbotg cable soon so i'll also try n post the result....
For those who don't know about pppwidget, its a which allows you to use your 3G/2G stick(dongle) on your tab using the otg cable...
Market link
Read More about project here..
Hi thanks for this information, I tried this and it requires extra kernel modules (option, which is not included in cm10 kernel).
proudfoot said:
Hi thanks for this information, I tried this and it requires extra kernel modules (option, which is not included in cm10 kernel).
Click to expand...
Click to collapse
Can you please tell the steps you took and the result you got...This isn't supposed to need any modules except usb_modswitch which it already include....It works on CM10 nexus 7 too...Which dongle did you use???
Yup, it works it requires couple of modules not included in cm10 p5100 kernel, i already build the modules (see attachment) . Enjoy
I uses zte cdma modem, that modem requires 'option' module but most 3g/CDMA dongle uses this module.
You just need to copy those modules to /system/lib/modules.
edit: forgot to actually attaching the modules ~_~
Update: Vpn doesn't seem to work with pppwidget.
Update2: works, needs to manually set the gateway
cool...i'll get back to you in couple of days(waiting for my new otg cable)... can you please give the .c file for the modules also....still learning all this stuff so wlll be helpful....
kan_bleach said:
cool...i'll get back to you in couple of days(waiting for my new otg cable)... can you please give the .c file for the modules also....still learning all this stuff so wlll be helpful....
Click to expand...
Click to collapse
clone it from here -> https://github.com/cmenard/android_kernel_samsung_espresso10
as for compiling it follow/adapt from this tutorial -> http://stevechui.blogspot.com/2011/10/compiling-kernel-modules-tunko-for.html
Its giving 'port not found'....any solutions??
Did you directly connected the dongle to tab or used a powered hub???
kan_bleach said:
Its giving 'port not found'....any solutions??
Did you directly connected the dongle to tab or used a powered hub???
Click to expand...
Click to collapse
Directly, what the log (it should be in /sdcard/pppwidget/log/) say?
edit: actually with this -> http://www.amazon.com/Samsung-EPL-1PL0BEGXAR-USB-Connection-Kit/dp/B005518J6Q it's still count as directly right?
proudfoot said:
Directly, what the log (it should be in /sdcard/pppwidget/log/) say?
edit: actually with this -> http://www.amazon.com/Samsung-EPL-1PL0BEGXAR-USB-Connection-Kit/dp/B005518J6Q it's still count as directly right?
Click to expand...
Click to collapse
Yup that's direct
Checked the log...mod_switch successful, but loading option module fails...option.ko is in the correct folder..
I tried insmod but it says operation not permitted...
Tried su and then insmod but then it says failed (trying using terminal emulator)..
kan_bleach said:
Yup that's direct
Checked the log...mod_switch successful, but loading option module fails...option.ko is in the correct folder..
I tried insmod but it says operation not permitted...
Tried su and then insmod but then it says failed (trying using terminal emulator)..
Click to expand...
Click to collapse
Your option.ko probably not compatible with the kernel, try to do
Code:
strings option.ko | grep vermagic
uname -a
and compare both output, it should be similar.
also if you use insmod I think you'll need to insmod usb_wwan.ko first, because option.ko depends on that module, so it should be
Code:
insmod usb_wwan.ko
insmod option.ko
then, move the pppwidget to launcher and plug the dongle.
proudfoot said:
Your option.ko probably not compatible with the kernel, try to do
Code:
strings option.ko | grep vermagic
uname -a
and compare both output, it should be similar.
also if you use insmod I think you'll need to insmod usb_wwan.ko first, because option.ko depends on that module, so it should be
Code:
insmod usb_wwan.ko
insmod option.ko
then, move the pppwidget to launcher and plug the dongle.
Click to expand...
Click to collapse
Tried the command...output is the same...still not able to use insmod...
Log
Code:
USB_ModeSwitch log from Sat Oct 27 16:23:19 IST 2012
Raw args from udev: 1-1.4/1-1.4:1.0
Using top device dir /sys/bus/usb/devices/1-1.4
----------------
USB values from sysfs:
manufacturer ZTE, Incorporated
product USB Storage
serial 000000000002
----------------
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /data/data/de.draisberghof.pppwidget/app_tmp/19d2.fff5
! matched. Reading config data
config: TargetVendor set to 19d2
config: TargetProductList set to fff1,fffe,ffff
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
Logger is: /system/bin/log
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 14 -v 19d2 -p fff5 -f $configBuffer
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
--------------------------------
Reading long config from command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.4 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x19d2
DefaultProduct= 0xfff5
TargetVendor= 0x19d2
TargetProduct= not set
TargetClass= not set
TargetProductList="fff1,fffe,ffff"
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="5553424312345678c00000008000069f030000000000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/014 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 19d2:fff5
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using interface number 0
Using endpoints 0x0a (out) and 0x89 (in)
USB description data (for identification)
-------------------------
Manufacturer: ZTE, Incorporated
Product: USB Storage
Serial No.: 000000000002
-------------------------
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x0a for message sending ...
Trying to send message 1 to endpoint 0x0a ...
OK, message successfully sent
Resetting response endpoint 0x89
Resetting message endpoint 0x0a
Could not reset endpoint (probably harmless): -34
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.
ok:busdev
--------------------------------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Reading attributes ...
All attributes matched
Mode switching was successful, found 19d2:fff1 (ZTE, Incorporated: ZTE CDMA Tech)
Now checking for bound driver ...
No driver has bound to interface 0
Module loader is /system/bin/insmod
Trying to find module "option"
Have you try to insert those modules manually first, before running pppwidget and plug-in the dongle? I think we use the same dongle, so it should works ~_~
anyway this is how i get this to work:
1. create directory /data/loca/modules/ on tab
2. move all those modules (option.ko, usb_wwan.ko, ppp_async.ko) to this directory.
3. su and insmod all those modules:
Code:
insmod /data/local/modules/usb_wwan.ko
insmod /data/local/modules/option.ko
insmod /data/local/modules/ppp_async.ko
5. move pppwidget to launcher and plug the dongle.
optional:
create this script and put it in /data/local/userinit.d/93loadmod directory
Code:
#!/system/bin/sh
/system/bin/insmod /data/local/modules/usb_wwan.ko
/system/bin/insmod /data/local/modules/option.ko
/system/bin/insmod /data/local/modules/ppp_async.ko
so it will load all those modules at boot time.
I am doing the same thing...but insmod is giving error
When i run the insmod command i get
insmod: init_module 'usb_wwan.ko' failed(Exec format error)
kan_bleach said:
insmod: init_module 'usb_wwan.ko' failed(Exec format error)
Click to expand...
Click to collapse
From a bit of googling it looks like your module is not build for your kernel (or even build for wrong architecture), what is your kernel? and where do you get the modules, do you compile it yourself or is it from somebody else?
try to do dmesg after you do insmod to see more information.
btw, the module that i have posted only works for p5100 and cm10 kernel (3.0.8-CM-g11fad65)
proudfoot said:
From a bit of googling it looks like your module is not build for your kernel (or even build for wrong architecture), what is your kernel? and where do you get the modules, do you compile it yourself or is it from somebody else?
try to do dmesg after you do insmod to see more information.
btw, the module that i have posted only works for p5100 and cm10 kernel (3.0.8-CM-g11fad65)
Click to expand...
Click to collapse
I used the modules you posted...I am using CMOC-10 kernel....Maybe that is the issue...But the kernels are supposed to be identical except for the OC and the governors feature...i am on 3.0.8-CM-gbd034d0
kan_bleach said:
gbd034d0
Click to expand...
Click to collapse
Yup that the problem, it needs to have the same extra version number even though it comes from same source. I guess I could compile it for you.
proudfoot said:
Yup that the problem, it needs to have the same extra version number even though it comes from same source. I guess I could compile it for you.
Click to expand...
Click to collapse
Please do...
kan_bleach said:
Please do...
Click to expand...
Click to collapse
Here, I hope it works because it comes from cm10 source, I only change the extra version to match yours.
proudfoot said:
Here, I hope it works because it comes from cm10 source, I only change the extra version to match yours.
Click to expand...
Click to collapse
Thanks i'll try and post the result...can you give me the github link for the cm10 kernal for our tab???
NOT SYSTEMLESS!
This writes to system, so systemless master race stay away.
Someone wanna make a Magisk version?
Instructions:
0. Download zip below and place inside internal storage.
1. Boot to TWRP.
2. Mount>System
3. Flash zip
4. Boot to Android and open a terminal emulator
5. Run dnscrypt enable. You probably have to do this every reboot.
Changing resolver:
Edit /system/etc/init.d/99dnscrypt. There's a line RESOLVER_NAME, change it to a suitable one from here under Name. I suggest you ping every server geographically nearby and go with the lowest ping.
Changing DNS server:
On Nexus 5X at least, use a Terminal Emulator and run
Code:
setprop net.dns1 127.0.0.1:53
Self-compile guide:
Requirements:
Linux computer (x86_64)
Android NDK (r12b is the newest so far, get the 64-bit one)
libsodium
dnscrypt-proxy
Here's how I did it:
1. Extract the NDK (unzip android-ndk-rXXb.zip )
2. Run
Code:
export ANDROID_NDK_HOME=<NDK Location>
3. Extract libsodium and dnscrypt-proxy.
4. Enter the folder of libsodium/dist-build, then edit android-build.sh such that NDK_PLATFORM:-android-16 becomes NDK_PLATFORM:-android-24. Then modify android-armv8-a.sh and add
Code:
-mtune=cortex-a57.cortex-a53 -mcpu=cortex-a57.cortex-a53
to the end of CFLAGS.
5. Return to libsodium root folder (cd ..) and do ./autogen.sh then ./dist-build/android-armv8-a.sh. When the script finishes it will tell you where the output is.
6. (Optional) Run android-toolchain-armv8-a/aarch64-linux-android/bin/strip on the output .so (typically in libsodium-android-armv8-a/lib/libsodium.so)
7. Now we do
Code:
export SODIUM_ANDROID_PREFIX=<libsodium output>
8. Enter the folder of dnscrypt, do the same modifications to dnscrypt's dist-builds. Again, do ./autogen.sh and ./dist-build/android-armv8-a.sh.
9. Now you have a fresh compilation of AArch64 dnscrypt-proxy!
It's usually dnscrypt-proxy-android-armv8-a.zip
10. Finally, we need to edit the zip file and rename the /system/lib folder to lib64, and change references in updater-script and /system/addon.d/75-dnscrypt.sh.
11. (Optional) Add --ephemeral-keys to 99dnscrypt for extra security.
Credits:
qwerty12 for the basic instructions
Changelog:
02/19: Updated libsodium (1.0.8->master) and dnscrypt-proxy(01/27 master->master)
03/17: Pulled freshest code from masters, compiled with NDK r11b and platform android-23
09/26: Latest stable branch of libsodium and master of dnscrypt. Compilation target now android-24. Compiled with NDK r12b
Changes to both dnscrypt-proxy and libsodium:
dist-build/android-build.sh:
Code:
NDK_PLATFORM:-android-16 to NDK_PLATFORM:-android-24
dist-build/android-arm-v8-a.sh:
Code:
Appended:
-mtune=cortex-a57.cortex-a53 -mcpu=cortex-a57.cortex-a53
to end of CFLAGS
Why not just release the compiled binaries ? would safe others with tinkering compiling it
Flashable zip
DragonHunt3r said:
Why not just release the compiled binaries ? would safe others with tinkering compiling it
Click to expand...
Click to collapse
Uploaded. I just thought most people would be more comfortable compiling their own code rather than trust a stranger. I still don't know how to fix the updater script though, it's the default one for now.
aschere said:
Uploaded. I just thought most people would be more comfortable compiling their own code rather than trust a stranger. I still don't know how to fix the updater script though, it's the default one for now.
Click to expand...
Click to collapse
That's true, but at the other side we trust random flashable zips for roms, mods etc from XDA
Thanks for the upload will take a look
Edit: well it works but in DNSManager for example it shows greyed out "Enable DnsCrypt"
dnsleaktest.com shows dnscrypt works though
DragonHunt3r said:
That's true, but at the other side we trust random flashable zips for roms, mods etc from XDA
Thanks for the upload will take a look
Edit: well it works but in DNSManager for example it shows greyed out "Enable DnsCrypt"
dnsleaktest.com shows dnscrypt works though
Click to expand...
Click to collapse
Shows up OK in my device.
So can I just flash the zip and use dns manager? nothing else?
---------- Post added at 03:25 AM ---------- Previous post was at 03:17 AM ----------
Will this work with a non 64 bit snapdragon 805
gangrenius said:
So can I just flash the zip and use dns manager? nothing else?
---------- Post added at 03:25 AM ---------- Previous post was at 03:17 AM ----------
Will this work with a non 64 bit snapdragon 805
Click to expand...
Click to collapse
This works only on 64-bit devices. For 32-bit devices, a download is provided here.
Yes, this is a flashable zip. However, DNS needs to be changed manually such as through DNS Manager because iptables doesn't entirely work.
Any major changes with 4/6? Thanks for updating this BTW.
th3g1z said:
Any major changes with 4/6? Thanks for updating this BTW.
Click to expand...
Click to collapse
It's all commits from 03/17 to 04/06.
Installed the zip successfully, when in terminal emulator, its not working, pls help!:crying:
Using rooted Lenovo A7000
Here's the full text directly copied from terminal emulator:
[email protected]:/ $ dnscrypt enable
Enabling dnscrypt-proxy...
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
[INFO] - [cs-uswest] does not support DNS Security Extensions
[INFO] + Namecoin domains can be resolved
[INFO] + Provider supposedly doesn't keep logs
[NOTICE] Starting dnscrypt-proxy 1.6.1
[INFO] Generating a new session key pair
[INFO] Done
[INFO] Server certificate #808464433 received
[INFO] This certificate is valid
[INFO] Chosen certificate #808464433 is valid from [2015-11-05] to [2016-11-04]
[INFO] Server key fingerprint is 881A:AED0:0427:BAF0:47D6:BDFA:6161A38:F019:571C:9BD2:A083:4A5F:C938:7E5D:8434
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
Done
[email protected]:/ $
kuchienkz said:
Installed the zip successfully, when in terminal emulator, its not working, pls help!:crying:
Using rooted Lenovo A7000
Here's the full text directly copied from terminal emulator:
[email protected]:/ $ dnscrypt enable
Enabling dnscrypt-proxy...
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
Done
[email protected]:/ $
Click to expand...
Click to collapse
Did you read the error you got? You have to be root. Try running 'su' before 'dnscrypt enable'
aschere said:
Did you read the error you got? You have to be root. Try running 'su' before 'dnscrypt enable'
Click to expand...
Click to collapse
Lol, i would not post my problem here if that could solve my problem :v
Already tried that several times. Still gives the same error.
kuchienkz said:
Lol, i would not post my problem here if that could solve my problem :v
Already tried that several times. Still gives the same error.
Click to expand...
Click to collapse
Can you post what version of Android, what phone?
aschere said:
Can you post what version of Android, what phone?
Click to expand...
Click to collapse
Android Version: 5.0.2
Lenovo A7000 : Phone Spec
kuchienkz said:
Android Version: 5.0.2
Lenovo A7000 : Phone Spec
Click to expand...
Click to collapse
Hmmm... I can't really think of anything other than the root: are you sure you rooted it? When you type su, do you switch to the root user?
aschere said:
Hmmm... I can't really think of anything other than the root: are you sure you rooted it? When you type su, do you switch to the root user?
Click to expand...
Click to collapse
Ah nevermind, i just reinstalled my phone with stock ROM, then rooted it. Now it works. :good:
If you curious about last rom, it is MIUI 7
Thank you so much for your help :victory:
Btw now that i understand how to run it. But as u said that i have to run it on every boot. Is there a way to run it automatically? Actually, im quite new to Terminal Emulator
kuchienkz said:
Ah nevermind, i just reinstalled my phone with stock ROM, then rooted it. Now it works. :good:
If you curious about last rom, it is MIUI 7
Thank you so much for your help :victory:
Btw now that i understand how to run it. But as u said that i have to run it on every boot. Is there a way to run it automatically? Actually, im quite new to Terminal Emulator
Click to expand...
Click to collapse
Good to hear that!
For automatic execution, you can create a script in /system/su.d or /system/addon.d I guess.
Ah actually, it should be in /system/etc/init.d
aschere said:
Ah actually, it should be in /system/etc/init.d
Click to expand...
Click to collapse
And.... how to make that script?
Im seriously beginner here
I dont have any idea what kind of script it is and what language it uses.
Maybe you can give me link to a site where i could learn to make one
kuchienkz said:
And.... how to make that script?
Im seriously beginner here
I dont have any idea what kind of script it is and what language it uses.
Maybe you can give me link to a site where i could learn to make one
Click to expand...
Click to collapse
Actually, the script should already be in there. See this.