Related
Hi,
I'm in the situation of having a working tablet, but the dodgy version of CWM. The original thread has been deleted and I remember there was adb command at the end to stop the original update.zip from flashing the factory recovery, but not what it was so I can reverse it !
So if anyone can help me out, that would be great, so I can avoid a bricked device !
jpearn said:
Hi,
I'm in the situation of having a working tablet, but the dodgy version of CWM. The original thread has been deleted and I remember there was adb command at the end to stop the original update.zip from flashing the factory recovery, but not what it was so I can reverse it !
So if anyone can help me out, that would be great, so I can avoid a bricked device !
Click to expand...
Click to collapse
go finding a original recovery dump,and flashing it in fastbootmode.
Has anybody been able to find a stock recovery for the A700? JP, I also flashed this broken CWM, thankfully I haven't used it but I want to put the stock one back on to avoid any issues.
1
californiarailroader said:
Has anybody been able to find a stock recovery for the A700? JP, I also flashed this broken CWM, thankfully I haven't used it but I want to put the stock one back on to avoid any issues.
Click to expand...
Click to collapse
reflashing the official update.zip
but,delete the first and the third comands in the updating list,this could avoid wiping/formating action to avoid damage to the /data partition.
lsnc said:
reflashing the official update.zip
but,delete the first and the third comands in the updating list,this could avoid wiping/formating action to avoid damage to the /data partition.
Click to expand...
Click to collapse
Thanks! However, the US Version doesn't have an update for it, at least not yet, and I haven't been able to find a stock US A700 ROM.
So we would need to rename the install-recovery.old back to install-recovery.sh in /system as this was disabled in CWM ??
So has anyone managed to successfully put on the stock recovery ?? !!
jpearn said:
So has anyone managed to successfully put on the stock recovery ?? !!
Click to expand...
Click to collapse
Take a little advice folks. If you don't know what you're doing, and your tab is running fine, don't be messing with anything. Just leave it alone til a better method comes.
My guess, if you rename your recovery.sh, is that when you boot, you will either get;
A. a "loading recovery kernel" message that just stays there
or
B. an "invalid recovery image", or something similar.
MD
Moscow Desire said:
Take a little advice folks. If you don't know what you're doing, and your tab is running fine, don't be messing with anything. Just leave it alone til a better method comes.
My guess, if you rename your recovery.sh, is that when you boot, you will either get;
A. a "loading recovery kernel" message that just stays there
or
B. an "invalid recovery image", or something similar.
MD
Click to expand...
Click to collapse
That's what I'm doing, I'm just leaving the CWM on there until somebody comes up with a fixed version.
californiarailroader said:
That's what I'm doing, I'm just leaving the CWM on there until somebody comes up with a fixed version.
Click to expand...
Click to collapse
Sounds like a plan I'll keep things working for now, thanks !
jpearn said:
Sounds like a plan I'll keep things working for now, thanks !
Click to expand...
Click to collapse
View attachment updater-script.rar
use this attachment to replace the original file,then reflash update.zip via cmw.
'cos i delete the formating commands in the list,u could reflash the official package to restore the official recovery.
lsnc said:
View attachment 1190247
use this attachment to replace the original file,then reflash update.zip via cmw.
'cos i delete the formating commands in the list,u could reflash the official package to restore the official recovery.
Click to expand...
Click to collapse
I don't understand these instructions. What original file is being replaced? What update.zip are you referring to?
EDIT
Well, I tried to swap out the update script that came in the ROM: SDs_Acer_A700_AV043.RV00RC00_AV043.RV07RC04_EMEA_CUS1, with the one provided above and seemed to have made some progress...I put on an external SD card and renamed to update and then flashed it through the CWM recovery and it completed. A random offset was noted and then the SD update completed note. However, when I rebooted the device it stuck at the Acer logo and never went any further.
EDIT
So, it then occurred to me that the flash through CWM was probably only partially successful - maybe the replacement of the recovery worked. So, I took the same ROM I noted above, unmodified, placed on the external SD card, renamed, etc. and flashed it and it worked - I never saw any signs of CWM during this process. I hope this helps others too.
EDIT
Looks like I spoke too soon...the flash never got past a 1/4 of the progress bar. Looks like I still have a non-functioning device.
lsnc said:
View attachment 1190247
use this attachment to replace the original file,then reflash update.zip via cmw.
'cos i delete the formating commands in the list,u could reflash the official package to restore the official recovery.
Click to expand...
Click to collapse
Hi, I'm a A510 user. I used the CWM to wipe data/factory reset, after that i cant flash any zip, and even cant enter the system. When i turn on the tab, it stuck on 'iconia tab' LOGO, I tried to hard reset, then i got a 'Unrecoverable bootloader error (0x19000008)'
I enter the fastboot and flash the stock recovery back. next i use the recovery to flash update.zip as usual, but every time the flash will stuck in 1/5 of the whole progress bar, I changed it with other rom zip, or even change the SD card, it didn't work anyway!
every time the flash stuck in the same place of the whole progress bar, i guess it is not an accident! After read your solution, I check the script in my zip, then i delete 2 lines about 'format' command. I think this time will be ok! but to my surprise the green turtle fell down when flashing.
I think the idea is great, but it maybe make the script incomplete, so it cant be flash in.:crying:
Hello, I seem to have soft bricked my tf700.
I flashed a newish pacman nightly in CWM (after wiping data/cache/dalvik cache), which completed with no errors, then I flashed the corresponding GAPPS. But my device became stuck in the pacman boot intro.
So I tried flashing slimkat which led to my device not getting past the first bootup screen (where you can enter recovery if pressing the corresponding buttons).
After this screw-up I stupidly hit the wipe data button on the bootloader. I then tried doing the method of using fastboot to erase system, cache, and all that so I could flash system blob of the newest asus US SKU (that is correct for a US bought tf700 right?). Either this or wiping the data caused me to have a different bootloader as pictured below as I no longer have the android button and it does not ask me to press volume up to access recovery (the only way to access recovery is by hitting the wipe data button in bootloader).
I can still fastboot flash CWM, but trying to flash TWRP does not work as it finishes but going into recovery causes the tablet to just restart. Trying to flash asus stock as above would always give me an error like the one pictured below. Similar errors occur if trying to flash any rom inside CWM via an external sd card.
I do not have access to adb as i believe i dont have usb debugging enabled since the pacman rom or any other rom did not ever start. It just gives me the device not found error even after manually installing the drivers on two different computers.
Cant seem to get these pics to load, but copying the url and pasting it works.
http://imgur.com/AaU0GMt
http://imgur.com/vDTVa4B
You probably flashed the wrong Rom. Try flashing the >right< stock Rom and go from there. Double check everything you flash.
tylerleo said:
You probably flashed the wrong Rom. Try flashing the >right< stock Rom and go from there. Double check everything you flash.
Click to expand...
Click to collapse
Whats the "right" rom here? Talking about the original asus stock rom? I have now tried the the pacman nightly, pacman release, slim kat release, clean rom release, an ICS asus stock rom, and two different versions of the jellybean asus stock rom. These were either done in CWM via internal sd card, external sd card, or done through fastboost flash system blob and flash zip.
gio3505 said:
Whats the "right" rom here? Talking about the original asus stock rom? I have now tried the the pacman nightly, pacman release, slim kat release, clean rom release, an ICS asus stock rom, and two different versions of the jellybean asus stock rom. These were either done in CWM via internal sd card, external sd card, or done through fastboost flash system blob and flash zip.
Click to expand...
Click to collapse
Whatever Rom came on the device,(Good thing to have, da) I'm not familiar with this device.
tylerleo said:
Whatever Rom came on the device,(Good thing to have, da) I'm not familiar with this device.
Click to expand...
Click to collapse
As far as i know, i have installed the stock rom, or atleast multiple versions of it with no success as it gives me an error stating something like staging or system when trying to write it.
gio3505 said:
As far as i know, i have installed the stock rom, or atleast multiple versions of it with no success as it gives me an error stating something like staging or system when trying to write it.
Click to expand...
Click to collapse
Hmm, I'd Download a stock Rom for the device offline, take on the sd card and put it on there real quick and try to flash that, if not, you probably bricked your device. I wouldn't know how to fix it beyond that. Ask the dev that made the Rom were everything that went south and an email to cwm wouldn't hurt either
I am also not sure if I need to have my external sd card formatted a certain way or download a specific CWM to allow flashing the stock rom. Ive spent over 10 hours trying to figure this out, very frustrating.
I have run CWM 6.0.4.6, CWM 6.0.4.7, and older versions to see if I could flash the stock rom with no luck. I have also tried different versions of TWRP but they always hang and reboot my tf700. I get errors ranging from status 6, status 7, cannot mount data, cannot mount staging, and cannot mount system. I am completely lost on what I can do. I have even tried a seperate sdcard to see if maybe the one I was originally using was bad with no luck. GG :/
gio3505 said:
I have run CWM 6.0.4.6, CWM 6.0.4.7, and older versions to see if I could flash the stock rom with no luck. I have also tried different versions of TWRP but they always hang and reboot my tf700. I get errors ranging from status 6, status 7, cannot mount data, cannot mount staging, and cannot mount system. I am completely lost on what I can do. I have even tried a seperate sdcard to see if maybe the one I was originally using was bad with no luck. GG :/
Click to expand...
Click to collapse
You gotta stop flashing stuff and slow down!
During all of this you never posted your bootloader version, so you may have been on the wrong bootloader to begin with - who knows.
When you hit the Wipe Data in the bootloader menu you caused the BL do write a wipe data command to the misc partition, causing the tablet to boot to recovery each time you booted (I'm guessing here) and then interrupting it. Usually, with CWM installed, it eventually sorts it out and executes the wipe data command, but that takes hours! You just have to leave it alone.
Hard to tell where you are now since you flashed all kinds of stuff since then.
Can you still boot into the bootloader and have a fastboot connection?
What's the BL version number?
If you boot, what does it boot into?
The picture links are broken - at least in Tapatalk. Post them again?
berndblb said:
You gotta stop flashing stuff and slow down!
During all of this you never posted your bootloader version, so you may have been on the wrong bootloader to begin with - who knows.
When you hit the Wipe Data in the bootloader menu you caused the BL do write a wipe data command to the misc partition, causing the tablet to boot to recovery each time you booted (I'm guessing here) and then interrupting it. Usually, with CWM installed, it eventually sorts it out and executes the wipe data command, but that takes hours! You just have to leave it alone.
Hard to tell where you are now since you flashed all kinds of stuff since then.
Can you still boot into the bootloader and have a fastboot connection?
What's the BL version number?
If you boot, what does it boot into?
The picture links are broken - at least in Tapatalk. Post them again?
Click to expand...
Click to collapse
Yes, the pictures are broken. You can still copy paste the url though. Couldnt figure out why it wouldnt work.
The tablet boots into the first screen that states it is unlocked, but does not go any further.
There is no bootloader version on the top left when holding down power + volume down.
I can still get to the place where it allows me to wipe data or fastboot, but the android icon to boot into android is now gone.
adb does not recognize my device even after manually installing the drivers, but fastboot works fine.
Is there any other way to find my bootloader version?
gio3505 said:
Yes, the pictures are broken. You can still copy paste the url though. Couldnt figure out why it wouldnt work.
The tablet boots into the first screen that states it is unlocked, but does not go any further.
There is no bootloader version on the top left when holding down power + volume down.
I can still get to the place where it allows me to wipe data or fastboot, but the android icon to boot into android is now gone.
adb does not recognize my device even after manually installing the drivers, but fastboot works fine.
Is there any other way to find my bootloader version?
Click to expand...
Click to collapse
Maybe you want to edit your post with the urls then.... Makes it easier for people trying to help...
You're seriously messed up, I think. I see a USB icon in there which would indicate that your bootloader is ancient. But then it says: "starting USB fastboot protocol".
Is that after you selected the USB icon?
Anyway, I think you're only chance is buster99's method to get it back. Did you try that already?
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
Naturally you have to extract the system blob from the 10.6.1.14.10 US Asus firmware, but then you can try to fastboot flash it with buster's method.
Good luck!
berndblb said:
Maybe you want to edit your post with the urls then.... Makes it easier for people trying to help...
You're seriously messed up, I think. I see a USB icon in there which would indicate that your bootloader is ancient. But then it says: "starting USB fastboot protocol".
Is that after you selected the USB icon?
Anyway, I think you're only chance is buster99's method to get it back. Did you try that already?
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
Naturally you have to extract the system blob from the 10.6.1.14.10 US Asus firmware, but then you can try to fastboot flash it with buster's method.
Good luck!
Click to expand...
Click to collapse
Its starts the usb fastboot automatically if no input is selected. I had a different bootloader up until i tried that thing that buster did. It always gives me an error like cant write to system or something if i try it.
gio3505 said:
Its starts the usb fastboot automatically if no input is selected. I had a different bootloader up until i tried that thing that buster did. It always gives me an error like cant write to system or something if i try it.
Click to expand...
Click to collapse
Which blob did you flash with buster's method?
I'm afraid you flashed something totally incompatible with your tablet...
You did not generate your nvflash blobs sometime prior to this, did you?
berndblb said:
Which blob did you flash with buster's method?
I'm afraid you flashed something totally incompatible with your tablet...
You did not generate your nvflash blobs sometime prior to this, did you?
Click to expand...
Click to collapse
I flashed the asus stock rom downloaded from their website. The US version as it was bought in the US (right? 0.o). I hadnt heard of nvflash before trying to install a rom so i did not make a backup.
gio3505 said:
I flashed the asus stock rom downloaded from their website. The US version as it was bought in the US (right? 0.o). I hadnt heard of nvflash before trying to install a rom so i did not make a backup.
Click to expand...
Click to collapse
Are you sure you downloaded the correct firmware? For the TF700?
Do you still have the original zip you extracted the blob from?
Post the exact file name please.
berndblb said:
Are you sure you downloaded the correct firmware? For the TF700?
Do you still have the original zip you extracted the blob from?
Post the exact file name please.
Click to expand...
Click to collapse
US_epaduser10_6_1_14_10_UpdateLauncher (2)
or
US_epaduser_VER104425UpdateLauncher
or
US_epad_user_9_4_5_30_20120907_UpdateLauncher
Ive downloaded a lot of different versions from the asus website. The last one came from a forum post listing older firmware, which I have tried a lot of different ones.
gio3505 said:
US_epaduser10_6_1_14_10_UpdateLauncher (2)
or
US_epaduser_VER104425UpdateLauncher
or
US_epad_user_9_4_5_30_20120907_UpdateLauncher
Ive downloaded a lot of different versions from the asus website. The last one came from a forum post listing older firmware, which I have tried a lot of different ones.
Click to expand...
Click to collapse
You flashed all of those blobs???
In which order?
With what result?
Jeez - I think you're done for...
Sorry mate, but gotta catch some sleep now. Maybe somebody else has a bright idea...
berndblb said:
You flashed all of those blobs???
In which order?
With what result?
Jeez - I think you're done for...
Sorry mate, but gotta catch some sleep now. Maybe somebody else has a bright idea...
Click to expand...
Click to collapse
I flashed the newest one first, and it gave me one of those errors that wouldnt allow me to flash it, and i tried the others with the same result. So technically i didnt flash any of them. I have been able to flash some roms, but they wouldnt boot so i would be stuck where i was when i started.
gio3505 said:
I flashed the newest one first, and it gave me one of those errors that wouldnt allow me to flash it, and i tried the others with the same result. So technically i didnt flash any of them. I have been able to flash some roms, but they wouldnt boot so i would be stuck where i was when i started.
Click to expand...
Click to collapse
Right stop flashing random stuff - you have combinations of JB4.2.1, JB4.1.1 and ICS 4.0.3 just listed there.
Let me put a call out to @lj50036 who may be able to save you but if you have messed the bootloader up with no nvflash backups you are not going to be happy with the result. If you can still get to the bootloader screen then he can perform miraculous superhero acts and *maybe* save your device.
gio3505 said:
I flashed the newest one first, and it gave me one of those errors that wouldnt allow me to flash it, and i tried the others with the same result. So technically i didnt flash any of them. I have been able to flash some roms, but they wouldnt boot so i would be stuck where i was when i started.
Click to expand...
Click to collapse
Shoot me an email at [email protected]
We can use hangouts see if there is a solution to your issue ...
Thx Josh
Hey guys, I'm trying to downgrade to KitKat after all the issues Lollipop is giving me and the incompatible apps I'm trying to run.
I am following instructions here but I came across a problem when flashing the system.img file.
The error it gives me is:
FAILED (remote: Insufficient memory.)
I can't flash over system and can not boot.
What am I missing? I was rooted and my bootloader unlocked prior to starting and I tried with the factory recovery and the 1.2.1 recovery image.
Edit: My issue has been solved. Flashing the Full OTA.zip file will install KitKat over Lollipop. No need to manually flash each file through fastboot. I wish guides would tell you that instead.
BlackDave said:
Hey guys, I'm trying to downgrade to KitKat after all the issues Lollipop is giving me and the incompatible apps I'm trying to run.
I am following instructions here but I came across a problem when flashing the system.img file.
The error it gives me is:
FAILED (remote: Insufficient memory.)
I can't flash over system and can not boot.
What am I missing? I was rooted and my bootloader unlocked prior to starting and I tried with the factory recovery and the 1.2.1 recovery image.
Click to expand...
Click to collapse
I don't know why that wouldn't work. Have you tried just downloading the image from nvidia HERE?
I'm assuming wifi since your sig says 16GB
Keithn said:
I don't know why that wouldn't work. Have you tried just downloading the image from nvidia HERE?
I'm assuming wifi since your sig says 16GB
Click to expand...
Click to collapse
Those are the same files as the ones I downloaded in the other thread.
I got my tablet working again on Lollipop 5.0.1 but that's not where I want to be. I've searched about my error message but most threads I found went unanswered.
Your best bet might just be to try getting a full OTA and flashing it through cwm or something. I'll try with mine when I have some time to backup and flash, probably later tomorrow. If I find anything out I'll post.
Sent from my SHIELD Tablet
BlackDave said:
I got my tablet working again on Lollipop 5.0.1 but that's not where I want to be. I've searched about my error message but most threads I found went unanswered.
Click to expand...
Click to collapse
I just flashed the images and booted.
Did you accidentally try flashing to the wrong place, such as flashing to boot( which would be too small) instead of system? Did you do all of the commands yourself or use the .bat? My shield disconnected after doing the boot.img and system.img for some reason, so I had to select fastboot protocol to reboot the bootloader and continue to flash the userdata.img, blob, and battery.dtb.
was your tablet internal memory full?, try wipping data and chace and you could use the script that the original Nvidia recovery image has zipped. I went up and down like 3 times, im in kitkat right now and not experiencing any problem.
Iams1002 said:
was your tablet internal memory full?, try wipping data and chace and you could use the script that the original Nvidia recovery image has zipped. I went up and down like 3 times, im in kitkat right now and not experiencing any problem.
Click to expand...
Click to collapse
No I wipped internal data since I keep everything on external and it still didn't work.
Keithn said:
I just flashed the images and booted.
Did you accidentally try flashing to the wrong place, such as flashing to boot( which would be too small) instead of system? Did you do all of the commands yourself or use the .bat? My shield disconnected after doing the boot.img and system.img for some reason, so I had to select fastboot protocol to reboot the bootloader and continue to flash the userdata.img, blob, and battery.dtb.
Click to expand...
Click to collapse
So I should just flash the ota.zip?
Also i did everything like the guide. I flashed boot to boot, recovery to recovery. The only thing that gave me an error was system. Userdata, blob, and battery also flashed successfully. After that didn't work, I also tried the .bat and that didn't work either. Flashing the 5.0.1 update got my tablet running again.
BlackDave said:
No I wipped internal data since I keep everything on external and it still didn't work.
So I should just flash the ota.zip?
Also i did everything like the guide. I flashed boot to boot, recovery to recovery. The only thing that gave me an error was system. Userdata, blob, and battery also flashed successfully. After that didn't work, I also tried the .bat and that didn't work either. Flashing the 5.0.1 update got my tablet running again.
Click to expand...
Click to collapse
If you can find a full ota.zip for update 1.2.1 I'd try that. I'm not sure why you would be having this issue. The only other things I can say to try is redownloading and rebooting the boot loader (select fastboot protocol) between images in case something funny is happening there. Let us know how you end up doing.
Sent from my HTC M8
Keithn said:
If you can find a full ota.zip for update 1.2.1 I'd try that. I'm not sure why you would be having this issue. The only other things I can say to try is redownloading and rebooting the boot loader (select fastboot protocol) between images in case something funny is happening there. Let us know how you end up doing.
Sent from my HTC M8
Click to expand...
Click to collapse
I flashed the 1.2.1 OTA update and it worked. The first time I tried, I did using the TWRP recovery but for some reason, that recovery fails to flash OTAs, so I went with CWM and flashed the 2.1 update and all worked again. After a while, I got tired of all the issues lollipop gave me so that's why I tried following that guide to downgrade.
In the end, using CWM and flashing the OTA is the best way to go. Thank you all for you help.
Hi Everyone!
Because of having issues i can´t fix on my OnePlus, i´m finally asking for some professional help here, as it´s getting more and more complicated and i don´t want to ruin my phone.
What was my plan?
Installing CM11S 44S on my OPO, which had the 05Q Version as factory setting.
Also i wanted to install a franco kernel.
I hoped, if i do both steps successfully, my OPO will have a good battery life (44S seemed to be the most efficient version, according to some forums).
What did i do so far?
First i set up an adb backup for my data, but not for the OS. However, i installed SDK plus tools and drivers.
Next step was installing a new recovery, which is able to flash a new version of CM11S, so i set up TWRP with fastboot, which means my device is "unlocked" now.
Everything worked well so far, i also made an backup in TWRP.
The problem:
I wanted to reboot my OPO at some point and TWRP asked me for rooting my device. Accidentally i swiped over so it started rooting process, but i didn´t want to root it, so i immediately shut the device down.
By now TWRP recovery/fastboot is working, but my OS 05Q is lost and i can´t install a new ROM because im getting the Report:
--
Checking for MD5 file...
Skipping MD5 check; no MD5 file found
Error flashing zip /<path to .zip file>
--
Can anyone help me to get 05Q back or the 44S with the franco kernel?
I know there might be some other threads that deal with similar problems, but actually none of them helped me so far. For example: do i need a fastboot image or signed flashable zips (which i have)? In which order do i install the kernel and the ROM?
Some Information:
I can access my device via fastboot and my OPO is also shown as a adb device on my MAC.
When starting in TWRP, i can also access the device in USB Mode, transfering files is also possible.
I´m not really competent with android modding or programming, so i will need some noob-friendly answers, but i bet you guys know how to help me out here.
Thank you very much for your help, i really don´t know what to do anymore.
EDIT:
I found out how to place a md5 file to the referring version, but it still sais: MD5 does not match.
I´m so done with it right now that i wish i had my OPO back as it was few days ago.
Well, i cant really help here as i have not face this problem but ur mistake was that u Immediately shut the device down the moment it was installing root. It may have corrupted the partitions of the phone and left it at that state, so maybe restoring the partitions of that section may help. Like i said im not knowledgeable about this
Agreed, you shouldn't have shut down the phone while it was modifying a partition. The root wouldn't have mattered anyway because you were about to overwrite the system partition by flashing a ROM. Go to my guide thread and look at section 8 to flash the stock images for the build you desire:
http://forum.xda-developers.com/showthread.php?t=2839471
Heisenberg said:
Agreed, you shouldn't have shut down the phone while it was modifying a partition. The root wouldn't have mattered anyway because you were about to overwrite the system partition by flashing a ROM. Go to my guide thread and look at section 8 to flash the stock images for the build you desire:
http://forum.xda-developers.com/showthread.php?t=2839471
Click to expand...
Click to collapse
Can i follow all these instructions altough im using a mac?
I will try it out today, hopefully this will fix the problem.
Thyrix said:
Can i follow all these instructions altough im using a mac?
I will try it out today, hopefully this will fix the problem.
Click to expand...
Click to collapse
Yes you can still use fastboot on a Mac, but you'll need to Google how to set it up on a Mac first.
Heisenberg said:
Yes you can still use fastboot on a Mac, but you'll need to Google how to set it up on a Mac first.
Click to expand...
Click to collapse
Alright, so fastboot is ready, but i need to know, if i will need one of those "unofficial stock rooted fashable zips" a fastboot image. or anything else? sorry to ask for
Can i trust an android version anyone rooted...?
Thyrix said:
Alright, so fastboot is ready, but i need to know, if i will need one of those "unofficial stock rooted fashable zips" a fastboot image. or anything else? sorry to ask for
Can i trust an android version anyone rooted...?
Click to expand...
Click to collapse
You need the fastboot images.
Heisenberg said:
You need the fastboot images.
Click to expand...
Click to collapse
Got stuck at step 2: It Terminal said error: cannot determine image filename for sbl1.mbn - although the name is correct and the file is in the correct folder :/
EDIT:
Fixed it, forgot to type sbl1 2 times, im sorry
And it worked, thank you sooooo much!!!
Let me preface this by saying I'm an idiot, I know just enough to be dangerous. Rooted and I wanted to restore and relock the bootloader. Instead of flashing the factory image first, I skipped that step and relocked the bootloader thinking it would wipe everything anyway. Of course now I realize I'm an idiot and I should not have skipped that step. Now I am soft bricked in the bootloader, and nothing will flash properly. Pretty sure I damaged the bootloader.
So my plea for help is, is there any way to repair or restore the bootloader?
I'm pretty sure as long as you can get into fastboot you can run the flash all bat.
You will have to download and extract the full factory image tho...and it should be like starting from fresh.oem
Also if you just wanted to flash a new bootloader you would just have to make sure it was the one extracted from the factory image you were already on.
noXcape said:
I'm pretty sure as long as you can get into fastboot you can run the flash all bat.
You will have to download and extract the full factory image tho...and it should be like starting from fresh.oem
Also if you just wanted to flash a new bootloader you would just have to make sure it was the one extracted from the factory image you were already on.
Click to expand...
Click to collapse
Well I've tried flash-all multiple times, it runs almost as normal except for one fail in the script (I'll show a pic of that after I go home and try again), and finishes as though it worked but when it reboots it can't get past bootloader. I'll try flashing the bootloader separately too.
Plus whenever I lock or unlock bootloader now it goes through the motion and then says "locked" or "unlocked" but it's faster than it should be and doesn't do that wiping animation at all.
Might be time to delete the old factory images and redownload new stuff
noXcape said:
Might be time to delete the old factory images and redownload new stuff
Click to expand...
Click to collapse
Already using the most recent, been playing around with that twrp beta, magisk, and v4a
Are you on current fastboot/adb?
cntryby429 said:
Are you on current fastboot/adb?
Click to expand...
Click to collapse
I think so, I downloaded it fresh a few weeks ago
trhacker01 said:
I think so, I downloaded it fresh a few weeks ago
Click to expand...
Click to collapse
Check again, I think a new version (late October) is in the most recent package.
I ran into the "stuck in bootloader" issue earlier today after running flash-all, but got out of it using some script by someone named Deuce that flashes the images one by one. I'll try and find a link.
Edit: here it is. This worked for me. Read carefully - you have to unzip the factory image that you've downloaded, then unzip the zip file that's in THAT zip.
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
JayBlack_686 said:
Check again, I think a new version (late October) is in the most recent package.
I ran into the "stuck in bootloader" issue earlier today after running flash-all, but got out of it using some script by someone named Deuce that flashes the images one by one. I'll try and find a link.
Edit: here it is. This worked for me. Read carefully - you have to unzip the factory image that you've downloaded, then unzip the zip file that's in THAT zip.
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Click to expand...
Click to collapse
Trying this now but still not working for me. Everytime where it fails is writing the bootloader, and everything else works fine. The bootloader writing fails in this deuce script, the regular flash-all, and flashing the bootloader separately.
Attached pics, 2 during deuce script, one during flash-all, and one during separate bootloader flash.
trhacker01 said:
Trying this now but still not working for me. Everytime where it fails is writing the bootloader, and everything else works fine. The bootloader writing fails in this deuce script, the regular flash-all, and flashing the bootloader separately.
Attached pics, 2 during deuce script, one during flash-all, and one during separate bootloader flash.
Click to expand...
Click to collapse
Sorry to hear that. I also got a bunch of failures during the process, and I don't think it automatically rebooted at the end of the process, but it ended up working on the first try (I was shocked when it did, since I saw so many failure warnings). He says in the thread that if it doesn't work, try formatting user data when prompted...I didn't have to, but may be worth a try, since you expected everything to be wiped anyway. Good luck.
trhacker01 said:
Trying this now but still not working for me. Everytime where it fails is writing the bootloader, and everything else works fine. The bootloader writing fails in this deuce script, the regular flash-all, and flashing the bootloader separately.
Attached pics, 2 during deuce script, one during flash-all, and one during separate bootloader flash.
Click to expand...
Click to collapse
A locked boot loader means you can't flash anything, that's the point. You can still flash an OTA.zip if you can get into stock recovery (you can still side load it in stock recovery I believe). Otherwise, you'll need to unlock the boot loader, and if it won't, and you can't get into Android to allow unlocking, then I'm not sure what, if anything, you can do.
Sent from my Pixel 2 using Tapatalk
danaff37 said:
A locked boot loader means you can't flash anything, that's the point. You can still flash an OTA.zip if you can get into stock recovery (you can still side load it in stock recovery I believe). Otherwise, you'll need to unlock the boot loader, and if it won't, and you can't get into Android to allow unlocking, then I'm not sure what, if anything, you can do.
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
Exactly.
At this point I'd try sideloading the latest ota.zip. If that doesn't work, I'd consider calling support and telling them your phone won't boot, without mentioning how you got there.
foosion said:
Exactly.
At this point I'd try sideloading the latest ota.zip. If that doesn't work, I'd consider calling support and telling them your phone won't boot, without mentioning how you got there.
Click to expand...
Click to collapse
yeah, good point. If I remember correctly, the Deuce script prompts you to unlock the bootloader at the beginning of the process - have you done that?
JayBlack_686 said:
yeah, good point. If I remember correctly, the Deuce script prompts you to unlock the bootloader at the beginning of the process - have you done that?
Click to expand...
Click to collapse
Yes, it's unlocked whenever trying to flash deuce or anything else. That's one of the strange things actually, it will respond to locking and unlocking, but it goes too quickly, skipping the process of wiping. Yeah I think I might be out of luck on this one.
JayBlack_686 said:
Sorry to hear that. I also got a bunch of failures during the process, and I don't think it automatically rebooted at the end of the process, but it ended up working on the first try (I was shocked when it did, since I saw so many failure warnings). He says in the thread that if it doesn't work, try formatting user data when prompted...I didn't have to, but may be worth a try, since you expected everything to be wiped anyway. Good luck.
Click to expand...
Click to collapse
Yeah I formatted to no avail.
Btw I ran out of my daily thanks, I'll continue as I get more. Thank you all very much for bothering to help me with this!