[Q] unbricking htc sensation problem ricognize usb - HTC Sensation

I did everything as you described. but the problem is that I can not get to see my phone. I understand it as a modem etc. how can I do to make it recognize usb? On windows is as described in the video ALCATEL HS-USB QDLoader 9008 (COM11). Thank you for your help:crying::crying:

Related

[Q] Qualcomm HS-USB QDloader 9008 - dead phone

Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
4tunecookie said:
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
Click to expand...
Click to collapse
It is hard bricked my friend a lot of us have suffered this also, JTAG or maybe warranty is your only option.

xt926 Qualcomm HS-USB QDLoader

Hi, I have bricked my phone. Now it is recognized by computer as Qualcomm HS-USB QDLoader. I have read that it possible to make blankflash to gain ability to boot into fastboot, but it necessary to have some specific files... Is it possible now to return it back to life?
maybe service provider can help?

[Completed] [Q] How to solve hardbrick on motorola android phones? maybe same way for all models

Hello, what is the right way to solve hardbricked phones on motorola android?
I dont know if every model has a different way...
I will ask about motorola xt626, iron rock...
I'll tell what I did to get
"Qualcomm HS-USB QDLoader 9008"
I was playing with this model, and then, tried to erase one file and phone never turned on again....
when phone is connected, "Qualcomm HS-USB QDLoader 9008" appears....
I remember I deleted one of these: svn.bin, dbl.mbn or osbl.mbn.
then phone never turned on again
I had no way to write that file again...
what steps should I follow when a phone is on this state?
I attach 2 files, you can see the files I have, and maybe tell me which one should I use to get that phone alive again....
I was able to get phone to "fasbtoot" again using "qflash -ramload MPRG7x30.hex -v", but, phone does not let me write... it always says remote failed
and when you reboot phone using fastboot reboot-bootloader, phone is stuck on "Qualcomm HS-USB QDLoader 9008" again....
could you please, point me, how to fix this phone?
I have working phones if needed
thanks
Hi,
Thanks for using XDA Assist Please post here Android Q&A, Help & Troubleshooting
Good Luck!
Thread Closed.

Hardbricked OnePlus One Doesn't Get Recognized by RestoreTool

Hi all,
I have a OnePlus One that's hardbricked (it doesn't show any forms of life).
I followed this guide, but I'm stuck. I installed QPST Drivers, and Qualcomm 2012 Drivers (although after installing this one, I get a message stating that the newest drivers are already installed.).
At the moment, my device is recognized in device manager as "Qualcomm HS-USB- QDLoader 9008 (COM10)" and sometimes it doesn't get recognized at all. The device manager will then say "unknown device".
When the device is recognized as "Qualcomm HS-USB- QDLoader 9008 (COM10)", it doesn't get recognized by the OnePlusRestoreTool (even if I run it in administrator mode).
I'm using Windows 7.
Could any of you perhaps help me find a solution?
Thanks in advance!
Robert

HS-USB QDLoader 9008 Issue

Hello everyone,
When flashing stock firmware, my phone suddenly went non-responsive during the reboot and now it seems to be bricked pretty bad. When looking in the device manager, the only weird thing I see is that the device is coming up as Qualcomm HS-USB QDLoader 9006.
From what I have seen, I need a package called an EMMC, but I have no idea where to get that. Does anyone have any suggestions for me?
I get no response, no bootloader, no logo, no recovery, and buttons do not work. I have other Razer 2 devices to test from to get this working and will do any suggestions to unbrick this device.
thank you,

Categories

Resources