[Q&A] [DEV|ROM] CM12 non-scheduled builds - ONE Q&A, Help & Troubleshooting

Q&A for [DEV|ROM] CM12 non-scheduled builds
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV|ROM] CM12 non-scheduled builds. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Will there be advanced reboot (+Screenshot in power menu) and double tap 2 wake?
Everything else is quite stable!
Thanks for this men!

thanks for your work.can you make the rom support F2FS?
thx

First off thank you for your work.
My question is, can we dirty flash the latest versions?

Anyone have a Moto 360 or other Android Wear and getting a notification that says "Connected, running sync loop"? As far as I can tell it isn't touching the battery, but it's nothing I've experienced on any other OPO rom.

benwalburn said:
Anyone have a Moto 360 or other Android Wear and getting a notification that says "Connected, running sync loop"? As far as I can tell it isn't touching the battery, but it's nothing I've experienced on any other OPO rom.
Click to expand...
Click to collapse
This shows up when user space is set to debug(or something like that). Basically most non stock roms.

Bootloop after setting alarm
flashed the last one. than install google home. I setted the alarm by voice. And boom bootloop!

Bluetooth on r 3.1
I had to downgrade from 3.1 to 3.0 because of Bluetooth not turning on...

any one else getting :
android.process.phone has stopped
android.process.clock has stopped
after reboot
and i keep getting
android.process.media has stopped ? i get this error all the time?
i did factory reset, wiped all data and flached like in OPs post.

Same question

Does this have Lollipop?

What's broken in the latest 3.1 build?

First Test
Bluetooth, GPS, Camera... - everything works fine on my OPO
---------- Post added at 11:56 AM ---------- Previous post was at 11:40 AM ----------
What are the main differences between this and this version?

Can we use this on multirom?

bnonymous said:
Same question
Click to expand...
Click to collapse
i got these errors away by reflashing and wiping data after reflashing. i guess it cleans it up.

Search bar
I think for the search bar you have to delete google search not google now launcher.

Crazy-Silver said:
Can we use this on multirom?
Click to expand...
Click to collapse
Yes. You just have to set this as the primary ROM.

yakuzlin said:
Does this have Lollipop?
Click to expand...
Click to collapse
Yes it does!!!

about the on screen keys
###delete###

dentillozie said:
any one else getting :
android.process.phone has stopped
android.process.clock has stopped
after reboot
and i keep getting
android.process.media has stopped ? i get this error all the time?
i did factory reset, wiped all data and flached like in OPs post.
Click to expand...
Click to collapse
Did you try formatting System partition from recovery before flashing?

Related

[Q&A] [ROM] [18Aug] [GNU/Linux] Sailfish OS (Alpha) - now with MultiROM

Q&A for [ROM] [18Aug] [GNU/Linux] Sailfish OS (Alpha) - now with MultiROM
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
5pik3 said:
When I flashed sailfish from the zip before the multirom version, I saw my internal storage (I needed root access to see it), in a dark corner of the system folders, but now with the .mrom version I can't find it anymore :'(
Anyway I found a easier solution to use the jolla store and have keyboard predictions, a solution where you don't have to edit any file \o/
If you want to install warehouse app download from here https://openrepos.net/content/basil/warehouse-sailfishos
Now open your terminal app or use the ssh access.
You need to have root permissions with 'devel-su'. Enter your password (the one in the developper options in the settings app).
Now you have to disable some repos : enter 'ssu dr home' and 'ssu dr adaptation0'.
Try a litle 'zypper refresh' and you will see no more authentication errors
And you can install the warehouse app with 'pkcon install-local /home/nemo/Downloads/harbour-warehouse-0.3-20.armv7hl.rpm'
And finally you type 'pkcon install store-client jolla-xt9 jolla-xt9-cp'
You can now have the keyboard prediction's and have both warehouse and jolla store to work
Click to expand...
Click to collapse
I love you

			
				
I, could we have an update of the development please?
Hi everyone!
Are there plans for an native xda app for SailfishOS?
would be great
So, what things will be in the next build? I think sailfish is awesome.
Click to expand...
Click to collapse
Well, i also hope it comes soon. For myself it would be enough, if OTA could be enabled and the WLAN Bug get fixed.
WLAN Issues
Is anyone else having issues with WLAN access?
It recognises the networks and signs in but doesn't appear to be connecting to the internet.
hotfix Repository
First, thanks for all your efforts and keep up the good work.
Why don't you keep the hotfix repository open for future fixes?
---------- Post added at 06:50 PM ---------- Previous post was at 06:45 PM ----------
[/COLOR]
stevenandree said:
Is anyone else having issues with WLAN access?
It recognises the networks and signs in but doesn't appear to be connecting to the internet.
Click to expand...
Click to collapse
since alpha5 WLAN seems to be fine. Maybe you got static IP in your Network?
Hey guys. Read all thread and also followed the instructions in the OP. Got Cataclysm (06 fev nightly) has primary and tried SFO as secondary in multirom v30. Can't pass google logo on first boot. Tried also power button boot and nothing happens. Is there some trick that I didn't see it? Thanks in advance.
antius said:
Hey guys. Read all thread and also followed the instructions in the OP. Got Cataclysm (06 fev nightly) has primary and tried SFO as secondary in multirom v30. Can't pass google logo on first boot. Tried also power button boot and nothing happens. Is there some trick that I didn't see it? Thanks in advance.
Click to expand...
Click to collapse
seems like there is something wrong with the multirom bootloader. if can you get into your android, just install multirom manager again.
Hello i have a problem with the rom it wont boot i have multirom installed. Is it something wrong with that?
Not entirely a question.
Since I haven't met the 10 post thing since I only lurk but have been on these forums for years I'm stuck posting here. I encountered a bug in the alpha7 build that wasn't present in alpha6 and was wondering if anyone else encountered this as well. I can no longer play music through the media app or when setting a song as the ringtone. Not the biggest problem but I was still curious.
kappacat said:
Since I haven't met the 10 post thing since I only lurk but have been on these forums for years I'm stuck posting here. I encountered a bug in the alpha7 build that wasn't present in alpha6 and was wondering if anyone else encountered this as well. I can no longer play music through the media app or when setting a song as the ringtone. Not the biggest problem but I was still curious.
Click to expand...
Click to collapse
same here. also the fingerterm keyboard is a bit tiny now, at least for my fingers
@ biox2003
Does the Bootloadermenu appear?
Maybe you should just try to install again.
the_Pan said:
same here. also the fingerterm keyboard is a bit tiny now, at least for my fingers
@ biox2003
Does the Bootloadermenu appear?
Maybe you should just try to install again.
Click to expand...
Click to collapse
I have reinstalled many time doesnt work with my nexus5.[emoji25]
biox2003 said:
I have reinstalled many time doesnt work with my nexus5. [emoji25]
Click to expand...
Click to collapse
you unlocked your Bootloader and install the sailfish alpha together with the Cyanogenmod version mentioned in the first Thread?
Maybe the TWRP Output could gave some hints? Have you tried to install ubuntu touch first - just for testing if it's possible.
Don't get me wrong, but if you want to get help, you have to provide some information first. And "it doesn't work" isn't an Description.
the_Pan said:
you unlocked your Bootloader and install the sailfish alpha together with the Cyanogenmod version mentioned in the first Thread?
Maybe the TWRP Output could gave some hints? Have you tried to install ubuntu touch first - just for testing if it's possible.
Don't get me wrong, but if you want to get help, you have to provide some information first. And "it doesn't work" isn't an Description.
Click to expand...
Click to collapse
Here some output http://tny.cz/7e6cf70e
I used the multirom method, it's just stuck at the google logo, help?
kappacat said:
Since I haven't met the 10 post thing since I only lurk but have been on these forums for years I'm stuck posting here. I encountered a bug in the alpha7 build that wasn't present in alpha6 and was wondering if anyone else encountered this as well. I can no longer play music through the media app or when setting a song as the ringtone. Not the biggest problem but I was still curious.
Click to expand...
Click to collapse
Looked into it and after some googling I feel stupid for questioning it. It's a licensing thing. Got it working by installing gst-fluendo-mp3.
For anyone interested since the repo many websites referenced is down. (Since I can't posts links...) Google "mega !2IFlGYLY!ze9nKF...bqTlPc0ujQaG9g" and ctrl-f the same thing and you'll find it.
Sailfish 2.0
Take a look at Nexus5 row in wiki.merproject.org/wiki/Adaptations/libhybris
That means we should wait a little bit more to see new build in our hands working. In this case it is may be used daily.
Thank you SO MUCH COMMUNITY !!!!
ikozzz said:
Take a look at Nexus5 row in wiki.merproject.org/wiki/Adaptations/libhybris
That means we should wait a little bit more to see new build in our hands working. In this case it is may be used daily.
Thank you SO MUCH COMMUNITY !!!!
Click to expand...
Click to collapse
Thank you for pointing this out! Man, I'm excited!
---------- Post added at 10:39 AM ---------- Previous post was at 10:06 AM ----------
biox2003 said:
Here some output http://tny.cz/7e6cf70e
Click to expand...
Click to collapse
i don't know what your phone is doing, but it do not install the sailfish rom.
again, is your bootloader unlocked? did you install the twrp version together with multirom? can you access the multirom bootloader menu right after starting the phone?

[Q&A] [ROM-AOSP][SlimKat Official][4.4.4] Stable 8.0 / Weekly 8.9

Q&A for [ROM-AOSP][SlimKat Official][4.4.4] Stable 8.0 / Weekly 8.9
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM-AOSP][SlimKat Official][4.4.4] Stable 8.0 / Weekly 8.9. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Oh god guys!
It's going to hell!!! Why I decided to update from 8.0 to 8.9!!!!!!!!!!!!!!!!! :crying::crying::crying:
Firstly I just made an update - I couldn't sign in to Google Acount! NIGHTMARE!!!!!!!!! :crying:
Then I decided to make full wipe, clean install.... now I can sign in in google account, but!!!!!!!!!!!! but SU doesn't work!!!!!!!!!!!!!!!
What's wrong with this rom? Or maybe I'm doing something wrong?
Man there should be a best of XDA. Cause for a first post this qualifies for the hall of shame.
Nothing is wrong with the ROM. I've flashed it dozens of times and never lost root or access to any of my accounts.
Take a deep breathe and explain why you think SU isn't working.
theesotericone said:
Take a deep breathe and explain why you think SU isn't working.
Click to expand...
Click to collapse
because he did a wipe and forgot to turn root on again in settings.
No issues.... But lots of icons.
Everything seems to be working on for me. Had a bit of a hard time getting it loaded but once I did it booted up.
I got a lot of icons going on up in the top right. LTE always showing. location always on and WiFi has the exclamation point but it's all working.
Why do i keep getting can't update device message? Someone please explain
noob here
Hey guys while flashing it said something abiut binairy stuff!!
Can I fix it with the faux kernel or did i do something stupid??
---------- Post added at 11:11 AM ---------- Previous post was at 11:00 AM ----------
Can someone help me??
While flashing error say binairy stuff bla bla
Possible to fix with faux or do something else??
rayray82 said:
Hey guys while flashing it said something abiut binairy stuff!!
Can I fix it with the faux kernel or did i do something stupid??
---------- Post added at 11:11 AM ---------- Previous post was at 11:00 AM ----------
Can someone help me??
While flashing error say binairy stuff bla bla
Possible to fix with faux or do something else??
Click to expand...
Click to collapse
What recovery? It's probably a recovery message about the update-binary being out of date, If so, it doesn't affect anything. It's just a warning.
thnx reply
rootSU said:
What recovery? It's probably a recovery message about the update-binary being out of date, If so, it doesn't affect anything. It's just a warning.
Click to expand...
Click to collapse
It was boot.img and i was good!!
Nexus 4 with slimkat receiving OTA update?
Hello,
I'm a little noob to this things so I hope you can help me.
I have a Nexus 4 with slimkat 4.4.4 and I just received a notification to download lollipop by google.
Is it normal? If I do the download, what would happen?
Really hope you can help me because I though I wouldn't receive more OTA updates since my custom rom.
Thank you all!
Repost: My new images appear in gallery as grey squares. Happened since 8.14 I believe. This happen to anyone else? Known solution?
noob to noob
Sekas said:
Hello,
I'm a little noob to this things so I hope you can help me.
I have a Nexus 4 with slimkat 4.4.4 and I just received a notification to download lollipop by google.
Is it normal? If I do the download, what would happen?
Really hope you can help me because I though I wouldn't receive more OTA updates since my custom rom.
Thank you all!
Click to expand...
Click to collapse
I think your gonna be stuck to Lollipop!! Dont know about the root.....
But i thinks it weird that you receive OTA with a Custom Rom.
Just downloaded Slim LP Alpha build (sorry i checked only nexus 5) so be patience!!
You can also download Lollipop en maybe root again until Slim LP is ready
helpp
Hey guys great rom it's running soo smooth awesome job on the latest lollipop alpha but there's only one thing I found that irritates me. When I charge my phone when it's powered off it always goes to recovery (twrp) About 15 seconds after showing the battery icon it just jumps straight to recovery...why??? Does not having the latest bootloader have anything to do with it cuz I don't have the latest lollipop one but I'm up to date with everything else like twrp, radio, supersu, gapps, etc . Or could it be the rom being in early stages and all...?
Dialer fc on alpha 0.6
Im facing dialer fc on 0.6 alpha
I have clean flashed and have tried to clear the dialer data in settings.
But nothing seems to have fixed this issue.
on nexus 4
Hello guys!
Do you know if slimlp for nexus4 will have double tap to wake?
Cheers
Sekas said:
Hello guys!
Do you know if slimlp for nexus4 will have double tap to wake?
Cheers
Click to expand...
Click to collapse
All Slimroms have the same features across all devices, so yes.
Thank you
rootSU said:
All Slimroms have the same features across all devices, so yes.
Click to expand...
Click to collapse
Thanks. Do you know any way to put the feature until slimlp stable comes out?
Sekas said:
Thanks. Do you know any way to put the feature until slimlp stable comes out?
Click to expand...
Click to collapse
Flash a custom kernel.
which
meatboy371 said:
Flash a custom kernel.
Click to expand...
Click to collapse
I'm with franco kernel. Which one has that feature?
Sekas said:
I'm with franco kernel. Which one has that feature?
Click to expand...
Click to collapse
That I remember: Unleashed, hellsCore, hellsDoctor and Semaphore.

[Q&A] [ROM][D850][BETA] CyanogenMod 12 OFFICIAL Nightlies 5.0 Lollipop

Q&A for [ROM][D850][BETA] CyanogenMod 12 OFFICIAL Nightlies 5.0 Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][D850][BETA] CyanogenMod 12 UNOFFICIAL Nightlies 5.0 Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
all flashed and working fine
wifi fine first boot took around 45secs
thanks op
Someone is bound to ask
Just wondering since I'm sure several Canadians are following your thread. Will this work on out D852 models up here in Canada or is this just for AT&T Variants.
anyone struggling to get roots access? titanium isnt seeing it and supersu doesnt seem to update binary
EDIT: found the solution, just me being incompetent
Does the camera work at all? That's the only thing Stopping me from flashing
Working just fine on mine
SmokeyTech1 said:
Does the camera work at all? That's the only thing Stopping me from flashing
Click to expand...
Click to collapse
Here are the issues I've noticed thus far:
- Root access broken (the listed solution of flashing the 2.2.4 beta of SuperSU through TWRP is no longer viable as the link has been taken down by Chainfire due to numerous issues)
- The dialer crashes when attempting to import contacts
- The usual Bluetooth and WiFi tethering issues as in previous CM builds
- The camera periodically drops its connection
Other than the expected bugs, this new build of Cyanogenmod is smooth, and given some time and improvement, can definitely become a daily driver. Great job!
I obtained root by flashing BETA su 2.23
2SHAYNEZ
shayneflashindaily said:
I obtained root by flashing BETA su 2.23
2SHAYNEZ
Click to expand...
Click to collapse
I can't find a link. Do you have one?
grumpyrussian said:
I can't find a link. Do you have one?
Click to expand...
Click to collapse
in the Beta SuperSU thread someone posted a link to 2.23 a couple pages back, but 2.25 was just posted by Chainfire...
Noticed that:
NFC doesn't work - try to toggle it and it greys out until the screen locks, once unlocked it is available to try enabling again..was excited to try tap n go..oh well
Icons look small. Is anyone else experiencing this?
krazyflipj said:
Icons look small. Is anyone else experiencing this?
Click to expand...
Click to collapse
Yes. Looks like the DPI was altered. Anyone know of a good way to fix this? I've tried a couple of different apps and neither one of them worked.
rawsushi said:
Yes. Looks like the DPI was altered. Anyone know of a good way to fix this? I've tried a couple of different apps and neither one of them worked.
Click to expand...
Click to collapse
Fixed. I edited build prop to 640 (Stock) Let's see if it breaks anything
*EDIT* Went with 560. 640 seemed too big
krazyflipj said:
Fixed. I edited build prop to 640 (Stock) Let's see if it breaks anything
Click to expand...
Click to collapse
Cool. So you're saying it's working so far? Or did you not try it out yet?
rawsushi said:
Cool. So you're saying it's working so far? Or did you not try it out yet?
Click to expand...
Click to collapse
So far so good.
rawsushi said:
Yes. Looks like the DPI was altered. Anyone know of a good way to fix this? I've tried a couple of different apps and neither one of them worked.
Click to expand...
Click to collapse
You have to edit the build.prop and then reboot
ro.sf.lcd_density=480 (Stock is 640)
---------- Post added at 12:44 PM ---------- Previous post was at 12:42 PM ----------
krazyflipj said:
Fixed. I edited build prop to 640 (Stock) Let's see if it breaks anything
Click to expand...
Click to collapse
What he said
Does xPosed Framework work with L5.0 CM12?
jinxzn said:
Does xPosed Framework work with L5.0 CM12?
Click to expand...
Click to collapse
No. Exposed doesn't work with lolipop
Got it. Thank you guys for the tip. Looks perfect now. So far no issues here either.

[Q&A] [STOCK ROM][5.0] NKD Android L Odexed

Q&A for [STOCK ROM][5.0] NKD Android L Odexed
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [STOCK ROM][5.0] NKD Android L Odexed. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I have root issues on the 12/14 build. Not sure what's going on.
JGillis2391 said:
I have root issues on the 12/14 build. Not sure what's going on.
Click to expand...
Click to collapse
A new version was just released today that should take care of that.
I got the current release 12/14 and I had root on the build previous to that, but not the new one.
JGillis2391 said:
I got the current release 12/14 and I had root on the build previous to that, but not the new one.
Click to expand...
Click to collapse
No idea. I've been running v3 for a couple of days now and haven't lost root once yet. I know after flashing it, I had to let the system settle and then reboot to get root to stick and I did a clean flash of v3 too.
Try flashing the v2.38 beta from the OP again over the top of what you have and see if it fixes anything.
Did Sammy keep all of the 5.0 goodies such as multi user??
gharris040604 said:
Did Sammy keep all of the 5.0 goodies such as multi user??
Click to expand...
Click to collapse
Yes I think so.
Things Removed or Don't work with Touchwiz 5.0
Has anyone had any issues sending a text longer than 160 characters or sending certain emojis? I am using stock messaging. This is the only thing I am having issues with. Saw others with similar issues, but no answers. Everything else on L runs amazing.
Sent from my SM-G900P using Tapatalk
wsoxrock said:
Has anyone had any issues sending a text longer than 160 characters or sending certain emojis? I am using stock messaging. This is the only thing I am having issues with. Saw others with similar issues, but no answers. Everything else on L runs amazing.
Click to expand...
Click to collapse
Yes, a known issue with stock messaging.
I'm not really sure about the emojis though but I think those need to be recognized by both ends to translate properly so L app must have some that aren't recognized by the receiving mms app. I think its funny that the xda mobile app and the desktop web forum, the available emojis don't all translate over between them either.
Just noticed that if I put my finger near the hart rate sensor it lights up I remember someone mentioned it but I could not locate a solution for it
evo bryan said:
Just noticed that if I put my finger near the hart rate sensor it lights up I remember someone mentioned it but I could not locate a solution for it
Click to expand...
Click to collapse
Isn't that tied into the Shealth app? I don't use it but try from Shealth.
tdunham said:
Isn't that tied into the Shealth app? I don't use it but try from Shealth.
Click to expand...
Click to collapse
It is only supposed to run when you choose a function in shealth
evo bryan said:
It is only supposed to run when you choose a function in shealth
Click to expand...
Click to collapse
I just tried it and works ok from Shealth. If I'm not running Shealth, mine doesn't seem to do anything when I cover it then remove my finger.
tdunham said:
I just tried it and works ok from Shealth. If I'm not running Shealth, mine doesn't seem to do anything when I cover it then remove my finger.
Click to expand...
Click to collapse
Ok
NKD is already a 5.0 compatible firmware.
Isn't that what his screenie shows hes on?
I'm on cm12 sprint version. Can I flash it directly?
Sent from my SM-G900P using Tapatalk
khpatel4991 said:
I'm on cm12 sprint version. Can I flash it directly?
Click to expand...
Click to collapse
It will only run on the Android 5.0 bootloader. If not, You have to follow instructions to flash proper firmware/bootloader.
If you can change recents key to menu, how do you change long click menu to recents?
chrisdog84 said:
If you can change recents key to menu, how do you change long click menu to recents?
Click to expand...
Click to collapse
We cant do that yet. That is why I added the recents shortcut to the pulldown in the new stuff addon.
Edit: Maybe if I ask the question differently someone will know the answer.
Does anyone know why the stock clock app doesn't show up as a choice in Daydream? I just wondered if it is rom specific or just Lollipop. Thanks.

[Q&A] [PAC-MAN ROM][LP-MR1 Beta2][ 5.1.1][UNOFFICIAL][Ferrari][MI 4i][11AUG]

Q&A for [PAC-MAN ROM][LP-MR1 Beta2][ 5.1.1][UNOFFICIAL][Ferrari][MI 4i][11AUG]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [PAC-MAN ROM][LP-MR1 Beta2][ 5.1.1][UNOFFICIAL][Ferrari][MI 4i][11AUG]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Awesome work
I will share this rom another forum
Probably a stupid question, but what set this aside from the CM rom's?
What are the differences with other rom's?
elot01 said:
Probably a stupid question, but what set this aside from the CM rom's?
What are the differences with other rom's?
Click to expand...
Click to collapse
this rom is cm with many add on features..
Hello All,
I'm having only one phone. Is this ROM good enough to use as daily driver ?
Anyone please give FULL review. Thanks
// TM
Please correct battery life
I have tried earlier version of this rom few days ago, but the battery life is very poor compare to MIUI 6.6.6.0, so changed back to MIUI
pls help to correct the battery life and it will be the perfect ROM....
---------- Post added at 05:11 PM ---------- Previous post was at 05:06 PM ----------
I have tried earlier version of this rom few days ago, but the battery life is very poor compare to MIUI 6.6.6.0, so changed back to MIUI
pls help to correct the battery life and it will be the perfect ROM....
@k2wl Thanks for very stable rom.. I am currently using your PAC build of 11-08.
It is very much complete and still here is an another update....I'm downloading the new build....will get back to you after flashing.....
Thank you very much for your hard work, time & efforts.......
ah.khiang said:
I have tried earlier version of this rom few days ago, but the battery life is very poor compare to MIUI 6.6.6.0, so changed back to MIUI
pls help to correct the battery life and it will be the perfect ROM....
---------- Post added at 05:11 PM ---------- Previous post was at 05:06 PM ----------
I have tried earlier version of this rom few days ago, but the battery life is very poor compare to MIUI 6.6.6.0, so changed back to MIUI
pls help to correct the battery life and it will be the perfect ROM....
Click to expand...
Click to collapse
are you using any other kernel????
i am having good battery life here...may be you need to calibrate your battery
@Toruk.Makto using it as a daily driver and it working good for me
pls fix battery drain in this rom, otherwise its good and smooth rom
---------- Post added at 04:38 PM ---------- Previous post was at 04:31 PM ----------
k2wl said:
are you using any other kernel????
i am having good battery life here...may be you need to calibrate your battery
@Toruk.Makto using it as a daily driver and it working good for me
Click to expand...
Click to collapse
hi, no, im not using any custom kernel... on miui 6.6.6.0 i can use phone from 9am to 9pm
but using this rom i can only use from 9am-6pm
ah.khiang said:
pls fix battery drain in this rom, otherwise its good and smooth rom
---------- Post added at 04:38 PM ---------- Previous post was at 04:31 PM ----------
hi, no, im not using any custom kernel... on miui 6.6.6.0 i can use phone from 9am to 9pm
but using this rom i can only use from 9am-6pm
Click to expand...
Click to collapse
try to calibrate your battery...sometimes when you switch from stock rom to aosp based roms you need to calibrate battery to fix battery errors
it just a bit weird, after few days use this rom, this morning wifi can't connect to router..
it say: acquaring netwprk address, how to fix it??? im sure my password is correct
hi, after few days using tjis great rom, i have problem with my wifi this morning. it can't connect and fail to get ip address...
im sure my password is correct, how to fix this problem?
ah.khiang said:
hi, after few days using tjis great rom, i have problem with my wifi this morning. it can't connect and fail to get ip address...
im sure my password is correct, how to fix this problem?
Click to expand...
Click to collapse
does not have this issue...i am using wifi daily for last 8-7 days at my home
I rooted my device. I installed TWRP. I did a factory reset and wiped Dalvik Cache. Then i tried flashing the ROM.. But i get an error saying "This file is for "something": this package is for "something" kinda error. Pls help.
PS: I am using Sensei Kernel
rocketonp500 said:
I rooted my device. I installed TWRP. I did a factory reset and wiped Dalvik Cache. Then i tried flashing the ROM.. But i get an error saying "This file is for "something": this package is for "something" kinda error. Pls help.
PS: I am using Sensei Kernel
Click to expand...
Click to collapse
install new twrp from mi4i toolkit in development forum
and try again
k2wl said:
does not have this issue...i am using wifi daily for last 8-7 days at my home
Click to expand...
Click to collapse
sadly, because no solution i must did factory reset and re-install all the apps from begining
also i facing weird thing, when there is incoming call, the screen can't light on...
but i did test the sensor, it was good and working condition make outgoing call can light on and turn off the screen...
ah.khiang said:
sadly, because no solution i must did factory reset and re-install all the apps from begining
also i facing weird thing, when there is incoming call, the screen can't light on...
but i did test the sensor, it was good and working condition make outgoing call can light on and turn off the screen...
Click to expand...
Click to collapse
did you try to press power button to wake up the device during incoming call???
Alternate Camera?
great rom but have some gripes about the camera and the launcher. any alternate camera that you can suggest? and also i was only able to install 1 theme. i tried others and it said they were successfully installed and after one second it says there's an error installing the theme. had this problem multiple times
I installed this one, after troubles with Xposed and Cm12.1
Now i have not Xposed, but do have some of the options i needed
Thanks.
k2wl said:
install new twrp from mi4i toolkit in development forum
and try again
Click to expand...
Click to collapse
I installed TWRP using MI toolkit. Version : 2.8.6.0. Is there an update? Is this not the latest version of TWRP? Please help. Thanks.

Categories

Resources