[Q] Unable to install APK after flashing LXR21O - Nexus 5 Q&A, Help & Troubleshooting

Hi
I am unable to install any apk after flashing LXR21O.
Anyone else facing the same issue ?

M.Noury said:
Hi
I am unable to install any apk after flashing LXR21O.
Anyone else facing the same issue ?
Click to expand...
Click to collapse
Works fine for me, I updated some Google apps from APKMirror and they worked (using ES File Explorer)
If you're trying to sideload via ADB then make sure you're using the latest version of adb/fastboot (just to rule it out)

EddyOS said:
Works fine for me, I updated some Google apps from APKMirror and they worked (using ES File Explorer)
If you're trying to sideload via ADB then make sure you're using the latest version of adb/fastboot (just to rule it out)
Click to expand...
Click to collapse
Did you wipe data (flash userdata ) ?

M.Noury said:
Did you wipe data (flash userdata ) ?
Click to expand...
Click to collapse
Yep, full update from scratch (I always do that)

EddyOS said:
Yep, full update from scratch (I always do that)
Click to expand...
Click to collapse
Do you have Lux or a screen filtering app installed? Try disabling that if you do.

derfasaurus said:
Do you have Lux or a screen filtering app installed? Try disabling that if you do.
Click to expand...
Click to collapse
I'm not having issues, it works fine for me

This thread it's for you...it was only at the bottom of the page: http://forum.xda-developers.com/google-nexus-5/help/unable-to-install-app-unknown-source-t2938415
SOLUTION: factory reset.

derfasaurus said:
Do you have Lux or a screen filtering app installed? Try disabling that if you do.
Click to expand...
Click to collapse
Thank you, Your correct Lux was causing this issue
I wish that you replied earlier before reflashing my device (include userdata)

Related

[MOD][TRICK][HOW-TO] BBM Ads Remover

Hello Everyone!
Are you all bored with ads on your Recent Updates menu on your BBM? OK, here i have a solution!​
Req :
A rooted device
Any custom recovery
actived init.d
just it i guess
How to :
Download the file & move to your SDCard
reboot into recovery mode
flash the .zip
reboot & enjoy your cleaned BBM
Note : the script only remove the ads, not channel suggestion.
Download file Here or Here​
It's works... thanks..
i need embedded version of no-ads BBM becuz i cant root my devices
does it still work ?
Paleskin said:
does it still work ?
Click to expand...
Click to collapse
It still does
Nope, i've try this, it's not work anymore for latest bbm.
Sofyanization said:
Nope, i've try this, it's not work anymore for latest bbm.
Click to expand...
Click to collapse
Did you confirm the files and permission was correctly set?
It still works in my case on 3 different devices all using latest version bbm.
shaqman89 said:
Did you confirm the files and permission was correctly set?
It still works in my case on 3 different devices all using latest version bbm.
Click to expand...
Click to collapse
I did, otherwise now I do my own way to make ads gone with rootex. Check my attachment.
any new trick to prevents BBM sponsored contents?
doen't work on latest bbm
Sofyanization said:
I did, otherwise now I do my own way to make ads gone with rootex. Check my attachment.
Click to expand...
Click to collapse
Fab, ta!!
Sofyanization said:
I did, otherwise now I do my own way to make ads gone with rootex. Check my attachment.
Click to expand...
Click to collapse
how you do this?
can I use other file explorer like MiXplorer?
diavolo rosso said:
how you do this?
can I use other file explorer like MiXplorer?
Click to expand...
Click to collapse
Yes, you can use mixplorer or any other file manager that supports changing permission.
In mixplorer, just check the properties of each selected files given in the screenshot mentioned above.
Thanks
Thanks, it works.

Bootloop on cm-13.0-20160115-NIGHTLY

I flashed supersu beta v2.52, what version should i flash?
You shouldn't flash it, cm has it already.
Areen said:
You shouldn't flash it, cm has it already.
Click to expand...
Click to collapse
For some apps (e.g. leandroid, wakelock detector) it's not enough. So which version is the proper one?
toster88 said:
For some apps (e.g. leandroid, wakelock detector) it's not enough. So which version is the proper one?
Click to expand...
Click to collapse
You probably have no idea how to properly set SU. It is already included in proper way and you should not flash any other version over it because it will cause bootloops.
Areen said:
You probably have no idea how to properly set SU. It is already included in proper way and you should not flash any other version over it because it will cause bootloops.
Click to expand...
Click to collapse
That's great, but maybe you could be a bit more helpful?
toster88 said:
That's great, but maybe you could be a bit more helpful?
Click to expand...
Click to collapse
What I meant is you should not flash anything because you already have included a great working SU into this rom. All you need to do is just set proper privileges in settings (Marshmallow thingy) and voila. If you can't do certain things or allow certain actions you have 99% chance that's sth with permissions in app or SU settings.
Areen said:
What I meant is you should not flash anything because you already have included a great working SU into this rom. All you need to do is just set proper privileges in settings (Marshmallow thingy) and voila. If you can't do certain things or allow certain actions you have 99% chance that's sth with permissions in app or SU settings.
Click to expand...
Click to collapse
I know that I've SU. What I'm saying is that with some apps it works just fine (adaway) and with others it doesn't (wakelock detector with since unplugged option enabled, leandroid doesn't work at all).
what can i do
i have flash super su 2.46 and know my moto g is on bootloop. I enter into fastboot mode, select recovery byt it doesnt works. What can i do?

[TUTORIAL]...Viper4Android proper installation on stock ROM

As a few days frustration and zillion tries are behind me let me explain proper instalation of this sound engine. Just to notice that you DON'T need permissive kernel for that because I installed it on my stock German ROM and now works in French Orange ROM G935FXXU1APBF as well !
INSTALLATION PROCEDURE ON CLEAN STOCK ROM :
At first...
You need to DELETE not to freeze sound alive and adapt sound.
In build.prop find the lines or add them as follows ;
Ipa.decode=false
tunnel.decode=false
lpa.use-stagefright=false.
.
1.You need to root your SM-G935F device with newest SuperSU by ChainFire located here.So, download and flash TWRP recovery from here and flash SuperSU.Wipe dalvik,wipe cache, then Restart your device.
2.From Playstore download and install latest STERICSON BUSYBOX. Install busybox in default su/xbin and give root permission.Restart your device again.
3. Download from official page Viper4android version 2.4.0.1 from HERE
4. Using Root explorer copy Viper4Android in folder PRIV-APP and give it permission 0644 rw-r--r-- (see attached image)
5.Restart your device
6. Open V4A and install driver when it asks...don't exit app or DON'T TOUCH anything else, just Restart your device.
7. Open V4A and go to Settings - UI Setting - Expert Mode
8. In some occasions V4A will ask for new driver installation...Install again and restart device.
9. Use your V4A wisely !
IMPORTAINT NOTIFICATION !
If you previously messed up with V4A or rooting,I recommend fresh ROM installation from scratch.
If V4A constantly offers to install driver, it means you did not properly rooted your device !
VIPER4ANDROID IS NOT WORKING ON STOCK PLAYER !
That's all.If you didn't read post carefuly, there is no any support else, because it is not needed.
Followed your guide, didn't ask to install a new driver after step 8 and viper is not working any suggestions?
Bernard23 said:
Followed your guide, didn't ask to install a new driver after step 8 and viper is not working any suggestions?
Click to expand...
Click to collapse
In some cases it doesn't ask for another driver installation after entering expert mode.Did you try another player?
If you don't used it on clean rom then it could be anything.
I've not needed to do half of this.
riso123 said:
I've not needed to do half of this.
Click to expand...
Click to collapse
How come ?
BusyBox Location is Su/xbin or System/xbin ?
JazonX said:
BusyBox Location is Su/xbin or System/xbin ?
Click to expand...
Click to collapse
Did you read thread ? I mentioned above that busybox is in /su/xbin/
tin2404 said:
Did you read thread ? I mentioned above that busybox is in /su/xbin/
Click to expand...
Click to collapse
I read and hence the question, because usually since MM - Busybox is installed to System/xbin by default.
Nevermind, Gonna try that as well now. Thanks!
ViPER4Android_FX_A4_6.0.1_New.zip
set through TWRP checked S7 Edge 935FD
barbik said:
ViPER4Android_FX_A4_6.0.1_New.zip
set through TWRP checked S7 Edge 935FD
Click to expand...
Click to collapse
dude that's zip work flawlessly :good:
tin2404 said:
How come ?
Click to expand...
Click to collapse
Because I simply download the latest APK and install it as a normal app rather than copy across and setting permissions.
I then download and flash the ZIP from the below site:
http://androiding.how/how-to-fix-viper4android-selinux-policy-issues-on-lollipop/
After that I installed the driver, rebooted and all was good.
I was the first\one of the first, to flash v4a on our device.
I've already created a tutorial thread for this in the guide section. People might find it easier, no need to make adjustments to build.prop for example, it's automatic.
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
Beefheart said:
I've already created a tutorial thread for this in the guide section. People might find it easier, no need to make adjustments to build.prop for example, it's automatic.
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
Click to expand...
Click to collapse
Exactly what I was thinking...
Beefheart said:
I've already created a tutorial thread for this in the guide section. People might find it easier, no need to make adjustments to build.prop for example, it's automatic.
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
Click to expand...
Click to collapse
Amazing recommendation on the flat icons xposed module. Loving the custom status bar icons [emoji106]
Sent from my SM-G935W8 using Tapatalk
barbik said:
ViPER4Android_FX_A4_6.0.1_New.zip
set through TWRP checked S7 Edge 935FD
Click to expand...
Click to collapse
Thank you so much for this barbik!
I've literally spent the best part of a day trying to get this to work. Followed various guides posted here but only your link applied V4A system wide rather than just for GoneMAD.
If anyone else is having issues, uninstall the driver and the app, reboot into twrp and flash this zip instead.
Thanks again you saved me a few grey hairs!
SirBarnz said:
Thank you so much for this barbik!
I've literally spent the best part of a day trying to get this to work. Followed various guides posted here but only your link applied V4A system wide rather than just for GoneMAD.
If anyone else is having issues, uninstall the driver and the app, reboot into twrp and flash this zip instead.
Thanks again you saved me a few grey hairs!
Click to expand...
Click to collapse
I agree, that zip helped me as well after a few failed attempts Now it works perfectly and Spotify sound amazing!
barbik said:
ViPER4Android_FX_A4_6.0.1_New.zip
set through TWRP checked S7 Edge 935FD
Click to expand...
Click to collapse
Hi, flashed, works! Super! Thanks. One question: what is that clock??? app inside zip for? Is it necessary? That's strange surprise... It's located in system/app/com.cyanogenmod.lockclock-1, please explain. Thank you.
N4 powered by Echoe™
FRM300 said:
Hi, flashed, works! Super! Thanks. One question: what is that clock??? app inside zip for? Is it necessary? That's strange surprise... It's located in system/app/com.cyanogenmod.lockclock-1, please explain. Thank you.
N4 powered by Echoe™
Click to expand...
Click to collapse
+1
What's that Clock APK ?
JazonX said:
+1
What's that Clock APK ?
Click to expand...
Click to collapse
his is a clock widget ... they are not needed, they can be removed
Mine works perfectly fine with just freezing those two Samsung apps...
Sent from my SM-G935F using Tapatalk

[Guide] How to use latest S-Health on devices with Knox tripped (0x1)

As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block
Rooted Devices
This method requires you to be rooted. You can always unroot after doing this
​If you are not rooted you can root your device by following the instructions below:​​
​
Download TWRP and save it somewhere you will remember.
Open ODIN and press AP then select the TWRP file you just downloaded.
Put your phone into Download Mode by holding Power + Volume Down + Home.
Connect your phone to your computer using a USB cable. Then Press Start in ODIN.
Download SuperSU-v2.79-SR3 and save it to your phone's SD Card.
Power off the phone and then hold Power + Volume Up + Home to boot to TWRP.
Press Install and locate the SuperSU file you downloaded earlier. Select it and Install.
You are now rooted.
​To remove root, simple open the SuperSU app from your app drawer, go to settings and select Full Unroot​
​
Follow the steps below to remove the S-Health block.
Download a root file explorer (such as Root Explorer, Root Browser or ES File Explorer).
Open the root file explorer and go to the /system folder.
Open the file named build.prop in text editor
In the build.prop file look for ro.config.tima=1
Change this line to ro.config.tima=0, simply changing the 1 to a 0
Reboor phone
Run the S-Health app
Non-Rooted Devices
If you are not rooted and/or cannot root then you can follow the steps below to get S-Health working (this will only work if the app is not installed as a system app).
Uninstall the S-Health App (if you cannot uninstall the app, this means it is installed to the system partition. Try Method 2 below).
Install version 4 of the S-Health app which can be found HERE
Open the app and complete setup
Update the S-Health app via the app store
You should now be able to use the S-Health app without issue
You can now use S-Health even with tripped Knox!!
{Mod edit: Download links via a suspicious URL has been removed}
Cannot download your S Health 4.8.1. Clicking the link asks me to log in to Facebook but, when I do, I get Sorry, your request could not be processed. Please try again. Can you upload it somewhere else?
Wonderful! It worked!
Hi
I update to nougat today an checked if i can use s health abd i didn't notice any problem.......no Error....i can use it normally as i use to do....keep in mind that I already've lost the knox waranty and it tells me that i got the latest version of s health
norm2002 said:
Cannot download your S Health 4.8.1. Clicking the link asks me to log in to Facebook but, when I do, I get Sorry, your request could not be processed. Please try again. Can you upload it somewhere else?
Click to expand...
Click to collapse
Apologies. I have updated the link in the OP.
Hammoud Abbas said:
Hi
I update to nougat today an checked if i can use s health abd i didn't notice any problem.......no Error....i can use it normally as i use to do....keep in mind that I already've lost the knox waranty and it tells me that i got the latest version of s health
Click to expand...
Click to collapse
Ye some people don't seem to be locked out. I've no idea why.
CuBz90 said:
Apologies. I have updated the link in the OP.
Ye some people don't seem to be locked out. I've no idea why.
Click to expand...
Click to collapse
thank God then
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Shidapu said:
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Like I said, it works fine for some. This is for those that cannot access it.
Shidapu said:
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Also here works perfectly with knox 0x1
ManDone.vRs said:
Also here works perfectly with knox 0x1
Click to expand...
Click to collapse
yes, but if u ever do a factory reset will not work anymore...with knox 0x1
Anyone having problem on step 11?
I cant install the app, giving me "there a problem pardon the package"
I have "unknown source selected", and I have downloaded 3 other times the app to make sure there was no problem...
Can someone help me, m
Thank
frumy said:
yes, but if u ever do a factory reset will not work anymore...with knox 0x1
Click to expand...
Click to collapse
i made it twices to test the latest build nougat , is the same , every day in gym i use SHealth... is ok .
mar_wu said:
Anyone having problem on step 11?
I cant install the app, giving me "there a problem pardon the package"
I have "unknown source selected", and I have downloaded 3 other times the app to make sure there was no problem...
Can someone help me, m
Thank
Click to expand...
Click to collapse
Have you enabled "Allow installation of apps from Unknown Sources"?
Have you tried re-downloading the app? It may have corrupt whilst downloading.
CuBz90 said:
Have you enabled "Allow installation of apps from Unknown Sources"?
Have you tried re-downloading the app? It may have corrupt whilst downloading.
Click to expand...
Click to collapse
Thanks for the reply...
Yes set for installation from unknown sources...
Yesterday after many hours of playing... I remembered about permission setting...
So I set to
RW
R
R
Restarted, and boom. Done!
Thanks, works great, now I have S health. Again
I have 5.4.1
CuBz90 said:
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block
This method requires you to be rooted. You can always unroot after doing this
You can now use S-Health even with tripped Knox!!
Click to expand...
Click to collapse
Cool mate !!
Working
Should we have the device rooted? true? The only one nougat rom i have is a stock no rooted. No way to install Shealth from system/app because I´m don´t have root permissions on this folder
and how do root the device on nougat? I read in different threads that currently rooting the device leads to broken wifi and brightness-adjustment.
Can somebody provide us with a proper root guide or does a simple unroot fix these problems after installing S-Health???
deliyan said:
Should we have the device rooted? true? The only one nougat rom i have is a stock no rooted. No way to install Shealth from system/app because I´m don´t have root permissions on this folder
Click to expand...
Click to collapse
sirhC6 said:
and how do root the device on nougat? I read in different threads that currently rooting the device leads to broken wifi and brightness-adjustment.
Can somebody provide us with a proper root guide or does a simple unroot fix these problems after installing S-Health???
Click to expand...
Click to collapse
Flash TWRP in ODIN.
Then boot to TWRP and flash SuperSU-v2.79-SR3
To unroot, open the SuperSU app and select 'Full unroot'. S-health will still work as normal.
I use this root method and it works without causing any issues to the functionality of my phone.
CuBz90 said:
Flash TWRP in ODIN.
Then boot to TWRP and flash SuperSU-v2.79-SR3
To unroot, open the SuperSU app and select 'Full unroot'. S-health will still work as normal.
I use this root method and it works without causing any issues to the functionality of my phone.
Click to expand...
Click to collapse
Shealth working with your tip.thanks

How install com.android.documentsui?

Hello, I have bgi problem. I have root on OP 8 Pro and use apk 3Call-in-one Toolbox and unistall "Files: ( com.android.documentsui ), now I can't add attachments in applications from memory right now. I cant istall this pacakge Any ideas whats now?
Any ideas?
The DocumentsUI module controls access to specific files for components that handle document permissions such as attaching a file to an email. This module is updatable, meaning it can receive updates to functionality outside of the normal Android release cycle.
Target Card Balance Now
Koepp said:
The DocumentsUI module controls access to specific files for components that handle document permissions such as attaching a file to an email. This module is updatable, meaning it can receive updates to functionality outside of the normal Android release cycle.
Click to expand...
Click to collapse
OK, how install now? I delete this app..
Solved.
zioloiso said:
Solved.
Click to expand...
Click to collapse
How?
Ddn221 said:
How?
Click to expand...
Click to collapse
I unistal com.android.documentsui this app 3C all-in-one toolbox and this app 3c restore.
zioloiso said:
I unistal com.android.documentsui this app 3C all-in-one toolbox and this app 3c restore.
Click to expand...
Click to collapse
Sorry but,i didnt understand.can you more clear?
Ddn221 said:
Sorry but,i didnt understand.can you more clear?
Click to expand...
Click to collapse
Maybe explain what you want to do.
zioloiso said:
Maybe explain what you want to do.
Click to expand...
Click to collapse
I had uninstalled com.android.documentsui from my redmi notev10 and now i can't install it back even with root access.
Ddn221 said:
I had uninstalled com.android.documentsui from my redmi notev10 and now i can't install it back even with root access.
Click to expand...
Click to collapse
How did you do it? (Method)
zioloiso said:
How did you do it? (Method)
Click to expand...
Click to collapse
Using an app called" System app safe remover". never mind i solved my problem by flashing recovery ota.thankyou for trying help me.
You have to root for this
1. Install any root browser (x-plorer , cx file manager etc.
2. open /system/priv-app/DocumentsUIGoogle
3.copy all apk files to any internel storage folder
4. Install all these apk files at once using any split apk installer ( Recommended -com.smartpack.packagemanager )
download link - https://play.google.com/store/apps/details?id=com.smartpack.packagemanager
5.Reboot
Note :- if you are unable to find these apk files then use attached files
I had uninstalled system apps using ladb application in mobile but now the problem is that this file is com.google.docomentsui it was also uninstalled and now there is a lot of trouble Give some solution so that we can reinstall this app without pc and without root.
himanshukonwar20 said:
I had uninstalled system apps using ladb application in mobile but now the problem is that this file is com.google.docomentsui it was also uninstalled and now there is a lot of trouble Give some solution so that we can reinstall this app without pc and without root.
Click to expand...
Click to collapse
With out root its not possible or try this command https://community.e.foundation/t/i-made-a-misstake-com-android-documentsui/27663

Categories

Resources