Can you use the Skinomi Full Body Skin+Screen Protector for Samsung Galaxy Note 4 from http://www.ebay.com/itm/Skinomi-Ful...ector-for-Samsung-Galaxy-Note-4-/141434842510 to protect the metal frame from scratches or will this product damage the paint?
arjun90 said:
Can you use the Skinomi Full Body Skin+Screen Protector for Samsung Galaxy Note 4 from http://www.ebay.com/itm/Skinomi-Ful...ector-for-Samsung-Galaxy-Note-4-/141434842510 to protect the metal frame from scratches or will this product damage the paint?
Click to expand...
Click to collapse
It will protect the metal from scratches and I don't see why it will damage the paint, it's just a skin. I prefer a case though as these skins make the phone feel glossy and just not that great feeling.
Does the skin have the capacity to rip the paint off as you peal the skin (in case you need to reapply)?
aturyan said:
It will protect the metal from scratches and I don't see why it will damage the paint, it's just a skin. I prefer a case though as these skins make the phone feel glossy and just not that great feeling.
Click to expand...
Click to collapse
arjun90 said:
Does the skin have the capacity to rip the paint off as you peal the skin (in case you need to reapply)?
Click to expand...
Click to collapse
I doubt it.
---------- Post added at 06:33 PM ---------- Previous post was at 06:32 PM ----------
arjun90 said:
Does the skin have the capacity to rip the paint off as you peal the skin (in case you need to reapply)?
Click to expand...
Click to collapse
Just use a hair dryer to heat the skin up before taking it off, it really helps.
Looks like it doesn't cover the shiny metal part of the frame.
OnlinePredator said:
Looks like it doesn't cover the shiny metal part of the frame.
Click to expand...
Click to collapse
Yeah it only protects the painted part of the frame. I have a skinomi full body on my Note 4.
Sam3gX said:
Yeah it only protects the painted part of the frame. I have a skinomi full body on my Note 4.
Click to expand...
Click to collapse
How has the bezel held up on your phone? Any scratches? I had the skinomi on my note 3 but idk if i want it on the note 4, people are saying it scratches easy.
Every single Note 4 out of the box has predisposing micro-scratches. No way to avoid them. I've gone through close to a dozen Note 4's, lost count. Even with careful handling, you are bound to get micro scratches on the chamfered metal edges (made out of "low-quality" metal). The Skinomi DOES NOT cover these areas. There are no manufacturers making protection for these areas. If these edges bother you, I suggest avoid the Note 4 or encase the phone in glass box (like those found in the Museums), and just stare at it, and don't touch it till the Next Big Thing Arrives. No kidding.
iverson3-1 said:
How has the bezel held up on your phone? Any scratches? I had the skinomi on my note 3 but idk if i want it on the note 4, people are saying it scratches easy.
Click to expand...
Click to collapse
I saw this recommendation in a of couple places, so I'm not sure who to attribute this excellent suggestion to, passing it on... but (if you pretty much always have your phone in a case), then wrap the bezel all the way around with kapton tape, just leaving a little gap for the ports / sensors. Say good bye to questions of whether or not a case that you like would scratch your bezel: it won't. That's a pretty sweet deal actually, if there's a case that you really dig but ruled it out due to reports of scratches, now you can use any case you like without even thinking about that kind of thing. I took a guess re: size and ordered a roll of 1/3" wide tape for $4 on Amazon. 1/3' works, but 1/4" (assuming they make it) would make it look a lot cleaner. Then you can use the rest for taping kapton (??)
Do you have a link for the one on Amazon. I'd gladly order one to be on the safe side.
Seems like that's the only solution. Does Kapton tape come in other colors? What thicknesses are available?
The width needs to be in millimeters.
Here's the 1/4, too thick though
http://www.amazon.com/Bertech-Yards...=1421675351&sr=8-16&keywords=1/3"+wide+kapton
jazzmachine said:
I saw this recommendation in a of couple places, so I'm not sure who to attribute this excellent suggestion to, passing it on... but (if you pretty much always have your phone in a case), then wrap the bezel all the way around with kapton tape, just leaving a little gap for the ports / sensors. Say good bye to questions of whether or not a case that you like would scratch your bezel: it won't. That's a pretty sweet deal actually, if there's a case that you really dig but ruled it out due to reports of scratches, now you can use any case you like without even thinking about that kind of thing. I took a guess re: size and ordered a roll of 1/3" wide tape for $4 on Amazon. 1/3' works, but 1/4" (assuming they make it) would make it look a lot cleaner. Then you can use the rest for taping kapton (??)
Click to expand...
Click to collapse
arjun90 said:
Do you have a link for the one on Amazon. I'd gladly order one to be on the safe side.
Seems like that's the only solution. Does Kapton tape come in other colors? What thicknesses are available?
The width needs to be in millimeters.
Here's the 1/4, too thick though
http://www.amazon.com/Bertech-Yards...=1421675351&sr=8-16&keywords=1/3"+wide+kapton
Click to expand...
Click to collapse
Sure, no problem; this is the one that I ordered http://www.amazon.com/gp/product/B00HFN669Y/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 Color-wise, I don't think it really comes it different colors... the tape itself is this translucent gold-ish color, and when I ordered it I figured that my phone is in a case 99% of the time anyway in case it hurt the aesthetics. However, after I had applied it, it turned out to be translucent enough that it was barely noticeable. In fact, that's why I recommend 1/4" wide tape over 1/3" (each being 1mm thick), which I kind of had to fold over the edges in a few paces. I think that 1/4" would definitely provide sufficient coverage and would look clean enough if you ever take your phone out of the case. The one I ordered works fine, but I usually need to fix it up a little whenever I put on a different case (and make sure none of it is sticking out from under the cover on the screen). It's a nice little "hack" to keep your hardware in primo condition :good:
Related
There have been a lot of threads and post about SPIGEN cases in particular scratching the metal frame of the N4.
What cases do NOT do this?
Thanks in advance
I'm using a Spigen Slim Armor for a week so far and no scratches on the frame. Don't see how it would either as only the soft inner tpu liner makes contact with it.
None, because it's not the case but the polished aluminum lip of the Note 4 that's the problem. Unless you live in a hermetically sealed environment, it'll probably end up scratched.
A few people have reported scratches with the Spigen cases but it'll happen with an otterbox, an UAG, a hardshell or a TPU case. For every person who doesn't have scratches, there will one someone who has scratches from using the same case.
Hey, perfect protection. I had S4 with S-View cover with Qi charging and it was fantastic. None scratches and wireless charging is awesome. I bought Note 4 (SM-N910F) Black with Samsung EP-VN910I Black. Fantastic
dr.m0x said:
I'm using a Spigen Slim Armor for a week so far and no scratches on the frame. Don't see how it would either as only the soft inner tpu liner makes contact with it.
Click to expand...
Click to collapse
My slim armor has scratched the top aluminum of my Note 4...bummer
Kawaisa said:
None, because it's not the case but the polished aluminum lip of the Note 4 that's the problem. Unless you live in a hermetically sealed environment, it'll probably end up scratched.
A few people have reported scratches with the Spigen cases but it'll happen with an otterbox, an UAG, a hardshell or a TPU case. For every person who doesn't have scratches, there will one someone who has scratches from using the same case.
Click to expand...
Click to collapse
yogi217 said:
My slim armor has scratched the top aluminum of my Note 4...bummer
Click to expand...
Click to collapse
I'm also beginning to think that it's not the case but small bits of dirt being trapped between the case and frame that might be the real issue.
On some cases it's the material and on others it's particles. Either way, the aluminum is going to get marked up. Just can't worry about it....
I wish Samsung would have just stuck to plastic instead of trying to make it feel premium. Since I always put a case on my phone, I never see or touch the outside of the naked phone and would not have to worry about the metal frame. The all plastic phone was fine with me.
just put a piece of scotch tape over the metal frame before installing the case
racinwarrior said:
just put a piece of scotch tape over the metal frame before installing the case
Click to expand...
Click to collapse
Kapton tape would work better. The adhesive is silicone based, so it will rub off easier.
Thanks for all the responses.
decided to roll naked
MrBShah said:
Thanks for all the responses.
decided to roll naked
Click to expand...
Click to collapse
I think I'm doing the same. Picked up a leather pouch from Amazon (bear motion) for 10 bucks when I need it.
I have my phone in a Ringke case since the moment I took it out of the box. My boyfriend doesn't use a case at all. Yesterday I took my phone out of the case to see how the metal rim is holding up in comparison to his, which is all scratched up. They are both just as damaged! Bottom line: it's not the cases, it will happen regardless. It appears to be so sensitive that the slightest speck of dust creeping in a case, or in a pocket, or bag, ruins it.
iR¡[email protected]!* from i9505 via Tapatalk 4
iridaki said:
I have my phone in a Ringke case since the moment I took it out of the box. My boyfriend doesn't use a case at all. Yesterday I took my phone out of the case to see how the metal rim is holding up in comparison to his, which is all scratched up. They are both just as damaged! Bottom line: it's not the cases, it will happen regardless. It appears to be so sensitive that the slightest speck of dust creeping in a case, or in a pocket, or bag, ruins it.
iR¡[email protected]!* from i9505 via Tapatalk 4
Click to expand...
Click to collapse
Wow. Thanks for sharing!
IBNobody said:
Kapton tape would work better. The adhesive is silicone based, so it will rub off easier.
Click to expand...
Click to collapse
That tape is cheap on eBay; plenty $1 links for 5mm x 100 feet , but lead time is about 2 weeks; slow boat from China.
So far, I've only scratched the edges near the USB port (minor). Odd how the cases don't offer more protection around the ports. Should have just left the shipping tape on until this arrived. I've dropped a lot of phone's but haven't cracked a screen and don't want to start doing that so I'll try the generous application of the tape and hope it sticks well with swapping the case a lot because it looks like I'll be using a soft case for home and my Verus Thor for outings.
Thanks for the suggestion.
My Note 4 is 4 days old and I have removed one of my spigen cases a few times. The metal frame has got a few nicks. My iPhone 5s, which I babied, has tons of nicks and scratches. Though not completely visible unless you look for them. With these aluminum/metal phones this is normal.
I feel like the first scratch/nick on your phone is like the first scratch/dent on your new car. The first one is always the one that eats away at you the most and even if it's invisible to everyone else, you can pinpoint the exact location of the damage. I'm kind of surprised that there hasn't been a conclusive way to restore the chamfered edges yet though.
I haven't noticed it being sensitive. Mine has been naked since day 1. Owned it for a month or so and even have been bold and put it in the cup holder when driving. Not a single scratch *knock on wood*. I am looking into vinyls though, that's my current new trend. Started with my old m8, now gonna skin the note.
The Otterbox Defender and Commuter Series cases do not scratch the frame. I was very skeptical with the Defender Series, but was surprised by the results.
h3ck said:
I haven't noticed it being sensitive. Mine has been naked since day 1. Owned it for a month or so and even have been bold and put it in the cup holder when driving. Not a single scratch *knock on wood*. I am looking into vinyls though, that's my current new trend. Started with my old m8, now gonna skin the note.
Click to expand...
Click to collapse
I'm not saying that any of our phones are deeply scratched either, but there is no doubt that the coating is not durable, as reported by many users.
arjun90 said:
The Otterbox Defender and Commuter Series cases do not scratch the frame. I was very skeptical with the Defender Series, but was surprised by the results.
Click to expand...
Click to collapse
Do you think a Defender case and a tempered glass screen protector could go together? I'm considering Otterbox but only if I can use my own screen protector.
Sent from my SM-P600 using Tapatalk
I just ordered my new Moto X 2014, I'm actually getting it for free to replace my old Moto X.
What are some good case and screen protector combinations? I know in the past I've had some trouble with a case AND a screen protector, it's sometimes one or the other. I'd prefer a clear case, but I'll probably end up getting more than 1 anyways.
blueice5249 said:
I just ordered my new Moto X 2014, I'm actually getting it for free to replace my old Moto X.
What are some good case and screen protector combinations? I know in the past I've had some trouble with a case AND a screen protector, it's sometimes one or the other. I'd prefer a clear case, but I'll probably end up getting more than 1 anyways.
Click to expand...
Click to collapse
Just got mine as well here is what I have found so far:
All tempered glass is a waste of money for this model none if it fits right at all due to the rounded edges
I would ASSUME the older plastic style ones MIGHT work better but read they also dont work that well
Most cases that say they are clear are actually frosted and that for me defeats the purpose of customizing the back
So I am going naked screen and hula case and will carry the phone in a belt pouch. Not the perfect solution but for me its acceptable. I would have preferred a strong clear tpu case (most turn yellow), I dont want a hard case, and would have love tempered glass on this but they simply dont adhere correctly.
There you have it the sad but true facts about cases and screen protectors from the research I have done. Hopefully some others in here can give you better news
adm1jtg said:
Just got mine as well here is what I have found so far:
All tempered glass is a waste of money for this model none if it fits right at all due to the rounded edges
I would ASSUME the older plastic style ones MIGHT work better but read they also dont work that well
Most cases that say they are clear are actually frosted and that for me defeats the purpose of customizing the back
So I am going naked screen and hula case and will carry the phone in a belt pouch. Not the perfect solution but for me its acceptable. I would have preferred a strong clear tpu case (most turn yellow), I dont want a hard case, and would have love tempered glass on this but they simply dont adhere correctly.
There you have it the sad but true facts about cases and screen protectors from the research I have done. Hopefully some others in here can give you better news
Click to expand...
Click to collapse
I don't mind a hard case and not a fan of the glass screen protectors. I like the film ones. My last film protector made it a matte screen and took the glare away. It was fantastic! And it worked with the case. But it's the only smartphone that I've had where screen protector AND case can be used.
blueice5249 said:
I don't mind a hard case and not a fan of the glass screen protectors. I like the film ones. My last film protector made it a matte screen and took the glare away. It was fantastic! And it worked with the case. But it's the only smartphone that I've had where screen protector AND case can be used.
Click to expand...
Click to collapse
I guess no one else has found better solutions. The naked case is a decent hard clear case though expensive and also prone to yellowing
adm1jtg said:
I guess no one else has found better solutions. The naked case is a decent hard clear case though expensive and also prone to yellowing
Click to expand...
Click to collapse
It's either going to be the Gelli Black Frost case or the Hula Bumper case initially. I'm getting one of those for free if I buy a screen protector, which I was going to do anyways.
I just can't get anyone to tell me what one of those cases, if any, work with a screen protector. I've been trying to get someone to answer this question for 2-3 days now. Nobody on earth knows! lol
blueice5249 said:
It's either going to be the Gelli Black Frost case or the Hula Bumper case initially. I'm getting one of those for free if I buy a screen protector, which I was going to do anyways.
I just can't get anyone to tell me what one of those cases, if any, work with a screen protector. I've been trying to get someone to answer this question for 2-3 days now. Nobody on earth knows! lol
Click to expand...
Click to collapse
I have the hula bumper case and i can't see any reason it would interfere at all with a screen protector. When I tried my glass protector it was in combination with the hula. Honestly thought most screen protectors are so think that they can be used with almost any case.
adm1jtg said:
I have the hula bumper case and i can't see any reason it would interfere at all with a screen protector. When I tried my glass protector it was in combination with the hula. Honestly thought most screen protectors are so think that they can be used with almost any case.
Click to expand...
Click to collapse
The glass is usually cut thinner, the film isn't always cut thinner and I've had instances where the cases would peel up the edges of the film. How did you like you Hula?
blueice5249 said:
The glass is usually cut thinner, the film isn't always cut thinner and I've had instances where the cases would peel up the edges of the film. How did you like you Hula?
Click to expand...
Click to collapse
I love the look, not sure it would truly give a huge amount of protection but should protect the edges of the glass on the screen which i read is the most vulnerable part of the phone. It does have a little but of movement when you hold the phone (aka wiggles slightly) but it also adds more grip, i have a plastic backed phone.. Those damn beveled edges, nice concept, nightmare in reality. They are why no glass or other screen protector will truly fit right.
adm1jtg said:
I love the look, not sure it would truly give a huge amount of protection but should protect the edges of the glass on the screen which i read is the most vulnerable part of the phone. It does have a little but of movement when you hold the phone (aka wiggles slightly) but it also adds more grip, i have a plastic backed phone.. Those damn beveled edges, nice concept, nightmare in reality. They are why no glass or other screen protector will truly fit right.
Click to expand...
Click to collapse
How bad is the wiggling? I have a bit of OCD so sometimes things like that will really bug me.
blueice5249 said:
How bad is the wiggling? I have a bit of OCD so sometimes things like that will really bug me.
Click to expand...
Click to collapse
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
These are not my pics but its how my phone looks
https://onedrive.live.com/?cid=89BBC42D0064FA66&id=89bbc42d0064fa66!1491&authkey=!AAcLU2pED71lK04
Also if you can order the hula from case mate rather then moto as moto charges an extra $5 shipping. They are also at times very hard to find in stock anywhere depending on the color you want.
adm1jtg said:
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
These are not my pics but its how my phone looks
https://onedrive.live.com/?cid=89BBC42D0064FA66&id=89bbc42d0064fa66!1491&authkey=!AAcLU2pED71lK04
Also if you can order the hula from case mate rather then moto as moto charges an extra $5 shipping. They are also at times very hard to find in stock anywhere depending on the color you want.
Click to expand...
Click to collapse
I really like the way that looks. My phone is Royal Blue, White Front, and Red Trim. So it's between a white or red hula case, or the gelli case. I'm leaning towards the Hula for more everyday use I think, and buying another case from amazon for when i need more protection. Or buying the hula and getting a good protecting case from moto's website
I have a coupon code from Moto for $25 off, so Im buying the screen protector and I basically get any case for free.
blueice5249 said:
I really like the way that looks. My phone is Royal Blue, White Front, and Red Trim. So it's between a white or red hula case, or the gelli case. I'm leaning towards the Hula for more everyday use I think, and buying another case from amazon for when i need more protection. Or buying the hula and getting a good protecting case from moto's website
I have a coupon code from Moto for $25 off, so Im buying the screen protector and I basically get any case for free.
Click to expand...
Click to collapse
I use the hulu and a cheap leather holster with belt clip to carry it in. Its extremely cheaply made but fits real well.
http://www.amazon.com/gp/product/B001H3ON0W/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I have the Hulu and the Trident Aegis. The plastic on the Hulu cracked at the USB port area (from bending when removed or put on), but it doesn't effect the case
I've been using the Hula bumper and Power Support Brilliant Film screen protector. The edge of the case doesn't contact the screen protector so it doesn't peel.
nbell13 said:
I have the Hulu and the Trident Aegis. The plastic on the Hulu cracked at the USB port area (from bending when removed or put on), but it doesn't effect the case
Click to expand...
Click to collapse
Thanks! I heard one other person had a problem with cracking. Very good to know beforehand, I'll make sure to be a bit more careful.
braves10 said:
I've been using the Hula bumper and Power Support Brilliant Film screen protector. The edge of the case doesn't contact the screen protector so it doesn't peel.
Click to expand...
Click to collapse
Thank you! This is exactly what I wanted to know! :highfive::good:
adm1jtg said:
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
Click to expand...
Click to collapse
Weird question, but do you think there's enough give with the Hula case where it would fit around the Moto X in a thin TPU case? I like the TPU cases but worry about the protection or lack thereof. Just wondering if it'd be possible to use them and occasional put the Hula Case around them for extra protection. Of course the buttons probably wouldn't work then...
fldude said:
Weird question, but do you think there's enough give with the Hula case where it would fit around the Moto X in a thin TPU case? I like the TPU cases but worry about the protection or lack thereof. Just wondering if it'd be possible to use them and occasional put the Hula Case around them for extra protection. Of course the buttons probably wouldn't work then...
Click to expand...
Click to collapse
You wont be able to use the two together, to much of a lip on the back with the hula case. Even if you did somehow fit it on the tpu would never touch the back of the phone just the lip around the edge. TPU will likely give more protection then hula but hula will likely give more grip then a tpu case.
New to the X, is it worth while getting a screen protector? Case is on its way, but with Gorilla Glass 3, is it truly worth the extra to cover the screen? Probably will end up with one but wanted some other opinions!
xKroniK13x said:
New to the X, is it worth while getting a screen protector? Case is on its way, but with Gorilla Glass 3, is it truly worth the extra to cover the screen? Probably will end up with one but wanted some other opinions!
Click to expand...
Click to collapse
That is completely up to you but I can tell you this based on my research and personal experience:
There is not a tempered glass screen protector on the market for the 2014 that adheres properly. Not one of them works well and thus dont bother with those. The 2014 tapered edges on the glass are the issue. I have HEARD of similar issues with PET style screen protectors but never messed with those as they never felt right to me.
Lastly everything I have read says those tapered edges o the glas DO make it more prone to crack or brake on a drop so you need SOMETHING to protect the glass edges. Full case, hula bumper, something....
blueice5249 said:
Thanks! I heard one other person had a problem with cracking. Very good to know beforehand, I'll make sure to be a bit more careful.
Click to expand...
Click to collapse
A lot of the cracking that people report is from dropping their phones, not taking the Hula on and off. The Hula is designed to absorb the shock of a drop and it breaks so that the phone does not. Better that your $20 bumper break than your $600 phone.
I take my Hula off and on all of the time and it has never cracked. I think people are dropping their phones and the Hula is doing exactly what it is supposed to do - absorbing the shock, which can result in it cracking instead of your phone.
Hey,
Im looking for a tempered glass for the z5. Any good manufacturers to look out for?
Thanks
I bought this one. Fits well, has proper cut outs.
http://www.amazon.com/gp/aw/d/B014V...+protector&dpPl=1&dpID=51hV4NHOhOL&ref=plSrch
orzly and maybe roxfit are good too
augie7107 said:
I bought this one. Fits well, has proper cut outs.
Click to expand...
Click to collapse
How is it? does it look cheap?
TriangleMonkey said:
How is it? does it look cheap?
Click to expand...
Click to collapse
It's fine and fits well. Not sure how a 0.9mm thick piece of transparent glass can look cheap or premium for that matter
I ordered CaseBase premium tempered glass from Amazon. However I haven't received it yet and can't use it until November.
I ordered a german brand (or at least its sold under the name "wunderglass" meaning wonder glass; made in china ofc).
The fit is ... not that great tbh. The cut outs are fine and in place, but it has too much space to the bezel of the z5. Is there a brand which produces such glass protectors with a minimal gap to the bezel?
I've tried a lot of different brands and I found none that can compete with StilGut in terms of cut, quality and durability. It's made by a German company as well [in China]. A little pricey, but well worth their cost.
http://goo.gl/mWKMxg
spielnicht said:
I've tried a lot of different brands and I found none that can compete with StilGut in terms of cut, quality and durability. It's made by a German company as well [in China]. A little pricey, but well worth their cost.
http://goo.gl/mWKMxg
Click to expand...
Click to collapse
Excellent! I was just earlier looking for a front + back solution. And 20 bucks for both with 2 year warranty? Pfft, that's cheap.
Spigen's glas.tr slim costs 25$ and it's just a front protector. And it's 0.4mm compared to this StilGut at 0.33mm.
I take it you've got some personal experience of these StilGut protectors?
Q: How's the, uhm, quality I guess, of the oleophobic coating on them? Longevity wise?
I've previously used UltimateShield on my One M7 and on my partner's LG G3. Our gripe with them is how shortlived the coating was.
Didn't take all that long (a little over two months I guess) for the coating to wear off inb4 smudges galore and made the glass NOT easy to clean. Of course any coating will not last indefinitely but still..
P.S. That typo in the thread title made me chuckle, guess it's time for bed...
I got the StilGut front/back kit same day as my phone (Saturday). The cut is perfect as usual. I completely forgot that the Z5 had frosted back glass and wasn't sure if the tempered glass would work but it did. Unfortunately you lose out on the grip of the new glass but until someone puts the phone through some use and report back on whether the frosted glass scratches easily or not, I am not taking chances.
anoke is the best one I have seen/used, fits perfect and has front and back. $8.88 prime
http://www.amazon.com/gp/product/B015E3QY4I?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
spielnicht said:
I got the StilGut front/back kit same day as my phone (Saturday). The cut is perfect as usual. I completely forgot that the Z5 had frosted back glass and wasn't sure if the tempered glass would work but it did. Unfortunately you lose out on the grip of the new glass but until someone puts the phone through some use and report back on whether the frosted glass scratches easily or not, I am not taking chances.
Click to expand...
Click to collapse
Well you could go and sand the back protector.
Sandpaper (the wet kind and with it use water to contain the glass dust, you don't wanna breath that)
A flat surface to put the sandpaper on (a mirror for example)
Tape to hold the sandpaper in place
Elbow grease
Have fun!
Start at a low grit 120 or 240 and work your way up to 600 or 1000 or even 2000 depending on the look you want.
You can get wet sandpaper in kits, that have a variety of different grit, online or from your local hardware store and so on.
I recommend Nillkin 9h+ pro.
Nillkin Amazing H+ always the best glass for all Zs!
Now available also for back, used it for previous Zs and no any single scratch, durable 9h !!!
Can I just buy a front screenprotector and leave the back?
It has a frosted glass back but wouldn't the camera would be damaged without a screen protector.
Also i can't find a brand that has front and back screen guards only front.
Sorry i am new to using smartphones.
Any ideas about privacy screen? Too many people read over my shoulder on crowded trains
coleburns said:
Any ideas about privacy screen? Too many people read over my shoulder on crowded trains
Click to expand...
Click to collapse
Sorry, could not stop laughing imaging you in the train with this, so noone could read over your shoulder.
I saw some sold online, but can not post links here(sure you can find them easily) and I can not say anything about privacy screens because I do not like any screens to be applied to original one. So instead of tampered glass I also have chosen original flip case.
augie7107 said:
I bought this one. Fits well, has proper cut outs.
http://www.amazon.com/gp/aw/d/B014V...+protector&dpPl=1&dpID=51hV4NHOhOL&ref=plSrch
Click to expand...
Click to collapse
I bought this one and I can vouch for the quality. It has the proper cut-outs for the front camera, sensors, and speakers. I've got it wet a few times and it's definitely not going to peel off due to moisture. One of my gripes with the Z5 was that the edges make the edges a little sharp to grip, but now with this tempered glass on it feels like the glass is flush with the edges like the iPhone.
Archos866 said:
I bought this one and I can vouch for the quality. It has the proper cut-outs for the front camera, sensors, and speakers. I've got it wet a few times and it's definitely not going to peel off due to moisture. One of my gripes with the Z5 was that the edges make the edges a little sharp to grip, but now with this tempered glass on it feels like the glass is flush with the edges like the iPhone.
Click to expand...
Click to collapse
And how easy was it to fit?
Hey guys,
So I have a question concerning using tempered glass screen protectors on the S6. Mainly, has anybody ever tried to use it in conjunction with a waterproof case? I used a cheap but well-reviewed case (RedPepper waterproof case) and it didn't close with the tempered glass front and back (no surprises there). It was only when I removed the back that I managed to fit it, and even then it wasn't completely waterproof. Oops.
Now I have a particularly thick screen protector--IIRC, it's a ZAGG, which according to Amazon is 0.4mm thick. Question is, would it be different if, say, I had a LifeProof Fre, and a thinner tempered glass protector?
And while we're at it, do any of you guys have tempered glass backs and have issues with wireless charging?
Thanks!
do you need a screen protector of any kind with a water proof case? Doesn't the case cover the entire phone?
HKSpeed said:
do you need a screen protector of any kind with a water proof case? Doesn't the case cover the entire phone?
Click to expand...
Click to collapse
If one would use the case as a daily driver, no. Guess I forgot to explain--I'm just gonna be using the waterproof case when I go into the pool or anywhere I anticipate that I'd be getting wet. Hence wanting to keep on the tempered glass protector.
I have lifeproof case with a 0.2 mm glass screen protector. The only gripe I have is the loss of screen sensitivity. Usable, but gotta press harder. Like you, I only use the waterproof case when I go outdoors, so it's a fair trade off.
Rakcoon said:
I have lifeproof case with a 0.2 mm glass screen protector. The only gripe I have is the loss of screen sensitivity. Usable, but gotta press harder. Like you, I only use the waterproof case when I go outdoors, so it's a fair trade off.
Click to expand...
Click to collapse
It doesn't have any issues with waterproofing? With the case I got, plus admittedly a thicker glass, it leaks a bit. I guess I'll just wait and see if it changes with the 0.2mm one. Thanks!
kisetsu17 said:
It doesn't have any issues with waterproofing? With the case I got, plus admittedly a thicker glass, it leaks a bit. I guess I'll just wait and see if it changes with the 0.2mm one. Thanks!
Click to expand...
Click to collapse
No it doesn't leak at all.
Rakcoon said:
I have lifeproof case with a 0.2 mm glass screen protector. The only gripe I have is the loss of screen sensitivity. Usable, but gotta press harder. Like you, I only use the waterproof case when I go outdoors, so it's a fair trade off.
Click to expand...
Click to collapse
I have the Galaxy S5 with the tempered glass screen protector and use the LifeProof Fre all the time. The device never comes out of the case. I do not see this loss of screen sensitivity. I can't see the S6 having a lower touch-resolution than the S5... I wonder if case design is at fault. But I too have zero leaking with the S5.
kisetsu17 said:
It doesn't have any issues with waterproofing? With the case I got, plus admittedly a thicker glass, it leaks a bit. I guess I'll just wait and see if it changes with the 0.2mm one. Thanks!
Click to expand...
Click to collapse
What case did you get? The only waterproof case I trust is LifeProof. With the exception of using a "pouch" for in the ocean.
elesbb said:
I have the Galaxy S5 with the tempered glass screen protector and use the LifeProof Fre all the time. The device never comes out of the case. I do not see this loss of screen sensitivity. I can't see the S6 having a lower touch-resolution than the S5... I wonder if case design is at fault. But I too have zero leaking with the S5.
What case did you get? The only waterproof case I trust is LifeProof. With the exception of using a "pouch" for in the ocean.
Click to expand...
Click to collapse
There's a pillow effect created by the glass screen protector. It makes it harder to register the touches.
elesbb said:
I have the Galaxy S5 with the tempered glass screen protector and use the LifeProof Fre all the time. The device never comes out of the case. I do not see this loss of screen sensitivity. I can't see the S6 having a lower touch-resolution than the S5... I wonder if case design is at fault. But I too have zero leaking with the S5.
What case did you get? The only waterproof case I trust is LifeProof. With the exception of using a "pouch" for in the ocean.
Click to expand...
Click to collapse
I got a RedPepper case (kinda generic, but it's the only one I found with a strap) which kinda feels flimsy but seems secure enough if I use the phone without the glass. I am planning to get a LifeProof though for the long-term.
Rakcoon said:
There's a pillow effect created by the glass screen protector. It makes it harder to register the touches.
Click to expand...
Click to collapse
You know what, my brother has the S6 with LifeProof Fre. He doesn't even have a screen protector on underneath and has the exact same issue as you. I was thinking a screen glass screen protector would help take up some of that space. I'm guessing a design flaw.
kisetsu17 said:
I got a RedPepper case (kinda generic, but it's the only one I found with a strap) which kinda feels flimsy but seems secure enough if I use the phone without the glass. I am planning to get a LifeProof though for the long-term.
Click to expand...
Click to collapse
My LifeProof Fre for the S5 has a spot for the strap but you have to get one yourself. Wasn't included.
elesbb said:
You know what, my brother has the S6 with LifeProof Fre. He doesn't even have a screen protector on underneath and has the exact same issue as you. I was thinking a screen glass screen protector would help take up some of that space. I'm guessing a design flaw.
My LifeProof Fre for the S5 has a spot for the strap but you have to get one yourself. Wasn't included.
Click to expand...
Click to collapse
There is a fix for the pillow effect. The plastic cover has to soften. What I did was, I installed lifeproof case with the tempered glass SP, and used it for a good week. After that, I removed the glass SP, and pillow effect is completely gone. So my lifeproof case is PERFECT now. (except when I use it in conjunction with glass SP).
elesbb said:
You know what, my brother has the S6 with LifeProof Fre. He doesn't even have a screen protector on underneath and has the exact same issue as you. I was thinking a screen glass screen protector would help take up some of that space. I'm guessing a design flaw.
My LifeProof Fre for the S5 has a spot for the strap but you have to get one yourself. Wasn't included.
Click to expand...
Click to collapse
I think that gap was by design--I've seen early iPhone waterproof case designs that had a small gap between the case screen and the phone, so you can still use the screen protector underwater (i.e., case screen would act as a resistive screen to the capacitive touch screen, if that makes sense).
The reviews I've seen of the Fre for the S6 doesn't show any strap holes, unless there's another version which has one. But yeah, I guess the LifeProof one over the RedPepper would make sense.
kisetsu17 said:
I think that gap was by design--I've seen early iPhone waterproof case designs that had a small gap between the case screen and the phone, so you can still use the screen protector underwater (i.e., case screen would act as a resistive screen to the capacitive touch screen, if that makes sense).
The reviews I've seen of the Fre for the S6 doesn't show any strap holes, unless there's another version which has one. But yeah, I guess the LifeProof one over the RedPepper would make sense.
Click to expand...
Click to collapse
Next time i go up to my mom's house I'll look at my brothers case.
But I think the gap was put there to help prevent the rainbow effect caused by the plastic and the screen.
kisetsu17 said:
I got a RedPepper case (kinda generic, but it's the only one I found with a strap) which kinda feels flimsy but seems secure enough if I use the phone without the glass. I am planning to get a LifeProof though for the long-term.
Click to expand...
Click to collapse
I've been looking for a review of the redpepper ones for quite some time.
How well do they work?
kisetsu17 said:
I think that gap was by design--I've seen early iPhone waterproof case designs that had a small gap between the case screen and the phone, so you can still use the screen protector underwater (i.e., case screen would act as a resistive screen to the capacitive touch screen, if that makes sense).
The reviews I've seen of the Fre for the S6 doesn't show any strap holes, unless there's another version which has one. But yeah, I guess the LifeProof one over the RedPepper would make sense.
Click to expand...
Click to collapse
Interesting theory! And if they designed the cases with that function in mind, they're geniuses. But the pillow effect is not uniform.. And it's unintentional according to discussions I've had with lifeproof.
I would thing you'd be better off with an poly urethane screen protector rather than a tempered glass if you're using it in a case. The glass may be too bulky.
elesbb said:
Next time i go up to my mom's house I'll look at my brothers case.
But I think the gap was put there to help prevent the rainbow effect caused by the plastic and the screen.
Click to expand...
Click to collapse
Rakcoon said:
Interesting theory! And if they designed the cases with that function in mind, they're geniuses. But the pillow effect is not uniform.. And it's unintentional according to discussions I've had with lifeproof.
Click to expand...
Click to collapse
Yeah maybe that's also one way to look at it. I remember using a battery case that came with a clear plastic layer that caused rainbows to dance around my screen lol.
asdfvtn said:
I've been looking for a review of the redpepper ones for quite some time.
How well do they work?
Click to expand...
Click to collapse
Good enough--what you'd expect from an average waterproof case. It does have a bit of flex, and it unsettles me a bit that the case I have is a bit bent on the edge with the seam on the two sides sitting around 0.1mm apart. The seals snap around quite well, but it doesn't feel as tight. But the rubber ring around the case is kinda thick so I guess that makes up for it.
I've seen many people have their battery door snap off with mild stress though. Definitely something you'd want to watch out for.
Pigpen007 said:
I would thing you'd be better off with an poly urethane screen protector rather than a tempered glass if you're using it in a case. The glass may be too bulky.
Click to expand...
Click to collapse
I'm hoping a 0.2mm case would be a snug fit there, but that's definitely where I'm going if the glass doesn't work out. I just think it's too big a tradeoff as I had numerous good experiences with tempered glasses protecting my screen.
kisetsu17 said:
Yeah maybe that's also one way to look at it. I remember using a battery case that came with a clear plastic layer that caused rainbows to dance around my screen lol.
Good enough--what you'd expect from an average waterproof case. It does have a bit of flex, and it unsettles me a bit that the case I have is a bit bent on the edge with the seam on the two sides sitting around 0.1mm apart. The seals snap around quite well, but it doesn't feel as tight. But the rubber ring around the case is kinda thick so I guess that makes up for it.
I've seen many people have their battery door snap off with mild stress though. Definitely something you'd want to watch out for.
I'm hoping a 0.2mm case would be a snug fit there, but that's definitely where I'm going if the glass doesn't work out. I just think it's too big a tradeoff as I had numerous good experiences with tempered glasses protecting my screen.
Click to expand...
Click to collapse
If you're in US, try to get your hands on iloome glass sp. It's 0.1mm, you can barely feel the screen protector.
Rakcoon said:
If you're in US, try to get your hands on iloome glass sp. It's 0.1mm, you can barely feel the screen protector.
Click to expand...
Click to collapse
Wow, I thought the thinnest I can go is a 0.2mm iCarez one. That's what I got and had shipped here. Waiting for it to arrive (not from the US.)
Hello all, I have tried a couple of tempered glass screen protectors; I have also read many many reviews.
It seems that there is no tempered glass protector that would be full screen; fit (most) cases and does not release on the edges for all.
I actually did not mind the screen protector which was installed by 1+ when I got the phone (and I did not like the tempered glass ones I tried).
So I contacted them today asking if I could buy a couple of those. To my biggest disappointment I was advised that although I am not the first one to ask, they do not consider the included screen protector to be a "product" and so they do not sell it even if I wanted a large quantity.
I spent some time researching ebay - but most (nearly all) sellers sell only tempered glass (which I don't want). The few seller that sell films are very expensive ($10+ vs. $1 for the tempered glass). That is also surprising as the cost of the film is much less...
So, my question to you all: who has tried film screen protectors? Where did you get it from and what experience did you have?
Thank you for sharing
I personally use 3MK Flexible glass - its hibrid glass. I use it from years, now on OP6. I think its the best option for any phone
https://folie-ochronne.3mk.pl/pl/p/OnePlus-6-Nietlukace-szklo-hybrydowe-3mk-FlexibleGlass/39482
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Just ordered me a set.
Im waiting for my iqshield to be delivered next week. Got some high hopes. Gave up on tgsps as there is none currently i would be happy about. Not even the original one.
I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?
Abaddon said:
I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?
Click to expand...
Click to collapse
Its Door to Door only. For me, they shipped within 2 days.
bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?
ajsmsg78 said:
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?
Click to expand...
Click to collapse
I don't have one installed at the moment, testing a G-Most TPG. But the fit is pretty precise, need patience to get it even on both sides. It's case friendly.
Z51 said:
Just ordered me a set.
Click to expand...
Click to collapse
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
will do
Might grab some of these and see what they are like https://www.ebay.co.uk/itm/3-X-For-....TR1.TRC0.A0.H0.Xoneplus+6+full+coverage.TRS0
Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.
Z51 said:
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.
Click to expand...
Click to collapse
Hmm, thats not good. Is it equally too big each way or is it just difficult to install totally centered, so its big on one side only?
A pic would help for sure.
I finally found regular PET protectors similar to the OEM ones that fit the phone well and are of good quality. I got them from here:
https://www.ebay.com/itm/5X-Ultra-Thin-Tempered-Glass-PET-Soft-HD-Screen-Protector-Film-For-OnePlus-6/163161457336?ssPageName=STRK%3AMEBIDX%3AIT&var=462326426650&_trksid=p2060353.m2749.l2649
The adhesive is pretty sticky on them so they don't lift off but it's hard to get them perfectly bubble free. The way I get these on perfect every time is put rubbing alcohol all over the screen then apply the protector and set it in place exactly centered (it's easy to move because of the alcohol) Then lightly push down on it and very lightly push out some of the alcohol so you don't see any bubbles. Then wait five minutes and peel off the front layer then lightly with a small cloth push out the rest of the bubbles. When the alcohol dries (takes about 10-15 mins) it will adhere perfectly and there will be no residue, bubbles or dust under the protector.
I've got an IQshield on my OP6 http://www.iqshield.com/iq32368-oneplus-6-phone-screen-protector.html
I tried a few TG ones and wasn't happy with any. They either didn't stick properly or had the annoying black border. The IQshield is the best protector I've tried.
The best screen protector is the soft nano TPU protectors they sell at ebay or aliexpress for a buck a piece and these cover the whole screen and can be applied wet with some soap and water.
Aakash_Aaku said:
Does it cover the entire screen or leaves a gap at the edges?
Click to expand...
Click to collapse
I know why you are asking ...Most protectors don't cover the edges well. But this does .
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)
---------- Post added at 06:47 AM ---------- Previous post was at 06:42 AM ----------
crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)