Hey guys,
So I have a question concerning using tempered glass screen protectors on the S6. Mainly, has anybody ever tried to use it in conjunction with a waterproof case? I used a cheap but well-reviewed case (RedPepper waterproof case) and it didn't close with the tempered glass front and back (no surprises there). It was only when I removed the back that I managed to fit it, and even then it wasn't completely waterproof. Oops.
Now I have a particularly thick screen protector--IIRC, it's a ZAGG, which according to Amazon is 0.4mm thick. Question is, would it be different if, say, I had a LifeProof Fre, and a thinner tempered glass protector?
And while we're at it, do any of you guys have tempered glass backs and have issues with wireless charging?
Thanks!
do you need a screen protector of any kind with a water proof case? Doesn't the case cover the entire phone?
HKSpeed said:
do you need a screen protector of any kind with a water proof case? Doesn't the case cover the entire phone?
Click to expand...
Click to collapse
If one would use the case as a daily driver, no. Guess I forgot to explain--I'm just gonna be using the waterproof case when I go into the pool or anywhere I anticipate that I'd be getting wet. Hence wanting to keep on the tempered glass protector.
I have lifeproof case with a 0.2 mm glass screen protector. The only gripe I have is the loss of screen sensitivity. Usable, but gotta press harder. Like you, I only use the waterproof case when I go outdoors, so it's a fair trade off.
Rakcoon said:
I have lifeproof case with a 0.2 mm glass screen protector. The only gripe I have is the loss of screen sensitivity. Usable, but gotta press harder. Like you, I only use the waterproof case when I go outdoors, so it's a fair trade off.
Click to expand...
Click to collapse
It doesn't have any issues with waterproofing? With the case I got, plus admittedly a thicker glass, it leaks a bit. I guess I'll just wait and see if it changes with the 0.2mm one. Thanks!
kisetsu17 said:
It doesn't have any issues with waterproofing? With the case I got, plus admittedly a thicker glass, it leaks a bit. I guess I'll just wait and see if it changes with the 0.2mm one. Thanks!
Click to expand...
Click to collapse
No it doesn't leak at all.
Rakcoon said:
I have lifeproof case with a 0.2 mm glass screen protector. The only gripe I have is the loss of screen sensitivity. Usable, but gotta press harder. Like you, I only use the waterproof case when I go outdoors, so it's a fair trade off.
Click to expand...
Click to collapse
I have the Galaxy S5 with the tempered glass screen protector and use the LifeProof Fre all the time. The device never comes out of the case. I do not see this loss of screen sensitivity. I can't see the S6 having a lower touch-resolution than the S5... I wonder if case design is at fault. But I too have zero leaking with the S5.
kisetsu17 said:
It doesn't have any issues with waterproofing? With the case I got, plus admittedly a thicker glass, it leaks a bit. I guess I'll just wait and see if it changes with the 0.2mm one. Thanks!
Click to expand...
Click to collapse
What case did you get? The only waterproof case I trust is LifeProof. With the exception of using a "pouch" for in the ocean.
elesbb said:
I have the Galaxy S5 with the tempered glass screen protector and use the LifeProof Fre all the time. The device never comes out of the case. I do not see this loss of screen sensitivity. I can't see the S6 having a lower touch-resolution than the S5... I wonder if case design is at fault. But I too have zero leaking with the S5.
What case did you get? The only waterproof case I trust is LifeProof. With the exception of using a "pouch" for in the ocean.
Click to expand...
Click to collapse
There's a pillow effect created by the glass screen protector. It makes it harder to register the touches.
elesbb said:
I have the Galaxy S5 with the tempered glass screen protector and use the LifeProof Fre all the time. The device never comes out of the case. I do not see this loss of screen sensitivity. I can't see the S6 having a lower touch-resolution than the S5... I wonder if case design is at fault. But I too have zero leaking with the S5.
What case did you get? The only waterproof case I trust is LifeProof. With the exception of using a "pouch" for in the ocean.
Click to expand...
Click to collapse
I got a RedPepper case (kinda generic, but it's the only one I found with a strap) which kinda feels flimsy but seems secure enough if I use the phone without the glass. I am planning to get a LifeProof though for the long-term.
Rakcoon said:
There's a pillow effect created by the glass screen protector. It makes it harder to register the touches.
Click to expand...
Click to collapse
You know what, my brother has the S6 with LifeProof Fre. He doesn't even have a screen protector on underneath and has the exact same issue as you. I was thinking a screen glass screen protector would help take up some of that space. I'm guessing a design flaw.
kisetsu17 said:
I got a RedPepper case (kinda generic, but it's the only one I found with a strap) which kinda feels flimsy but seems secure enough if I use the phone without the glass. I am planning to get a LifeProof though for the long-term.
Click to expand...
Click to collapse
My LifeProof Fre for the S5 has a spot for the strap but you have to get one yourself. Wasn't included.
elesbb said:
You know what, my brother has the S6 with LifeProof Fre. He doesn't even have a screen protector on underneath and has the exact same issue as you. I was thinking a screen glass screen protector would help take up some of that space. I'm guessing a design flaw.
My LifeProof Fre for the S5 has a spot for the strap but you have to get one yourself. Wasn't included.
Click to expand...
Click to collapse
There is a fix for the pillow effect. The plastic cover has to soften. What I did was, I installed lifeproof case with the tempered glass SP, and used it for a good week. After that, I removed the glass SP, and pillow effect is completely gone. So my lifeproof case is PERFECT now. (except when I use it in conjunction with glass SP).
elesbb said:
You know what, my brother has the S6 with LifeProof Fre. He doesn't even have a screen protector on underneath and has the exact same issue as you. I was thinking a screen glass screen protector would help take up some of that space. I'm guessing a design flaw.
My LifeProof Fre for the S5 has a spot for the strap but you have to get one yourself. Wasn't included.
Click to expand...
Click to collapse
I think that gap was by design--I've seen early iPhone waterproof case designs that had a small gap between the case screen and the phone, so you can still use the screen protector underwater (i.e., case screen would act as a resistive screen to the capacitive touch screen, if that makes sense).
The reviews I've seen of the Fre for the S6 doesn't show any strap holes, unless there's another version which has one. But yeah, I guess the LifeProof one over the RedPepper would make sense.
kisetsu17 said:
I think that gap was by design--I've seen early iPhone waterproof case designs that had a small gap between the case screen and the phone, so you can still use the screen protector underwater (i.e., case screen would act as a resistive screen to the capacitive touch screen, if that makes sense).
The reviews I've seen of the Fre for the S6 doesn't show any strap holes, unless there's another version which has one. But yeah, I guess the LifeProof one over the RedPepper would make sense.
Click to expand...
Click to collapse
Next time i go up to my mom's house I'll look at my brothers case.
But I think the gap was put there to help prevent the rainbow effect caused by the plastic and the screen.
kisetsu17 said:
I got a RedPepper case (kinda generic, but it's the only one I found with a strap) which kinda feels flimsy but seems secure enough if I use the phone without the glass. I am planning to get a LifeProof though for the long-term.
Click to expand...
Click to collapse
I've been looking for a review of the redpepper ones for quite some time.
How well do they work?
kisetsu17 said:
I think that gap was by design--I've seen early iPhone waterproof case designs that had a small gap between the case screen and the phone, so you can still use the screen protector underwater (i.e., case screen would act as a resistive screen to the capacitive touch screen, if that makes sense).
The reviews I've seen of the Fre for the S6 doesn't show any strap holes, unless there's another version which has one. But yeah, I guess the LifeProof one over the RedPepper would make sense.
Click to expand...
Click to collapse
Interesting theory! And if they designed the cases with that function in mind, they're geniuses. But the pillow effect is not uniform.. And it's unintentional according to discussions I've had with lifeproof.
I would thing you'd be better off with an poly urethane screen protector rather than a tempered glass if you're using it in a case. The glass may be too bulky.
elesbb said:
Next time i go up to my mom's house I'll look at my brothers case.
But I think the gap was put there to help prevent the rainbow effect caused by the plastic and the screen.
Click to expand...
Click to collapse
Rakcoon said:
Interesting theory! And if they designed the cases with that function in mind, they're geniuses. But the pillow effect is not uniform.. And it's unintentional according to discussions I've had with lifeproof.
Click to expand...
Click to collapse
Yeah maybe that's also one way to look at it. I remember using a battery case that came with a clear plastic layer that caused rainbows to dance around my screen lol.
asdfvtn said:
I've been looking for a review of the redpepper ones for quite some time.
How well do they work?
Click to expand...
Click to collapse
Good enough--what you'd expect from an average waterproof case. It does have a bit of flex, and it unsettles me a bit that the case I have is a bit bent on the edge with the seam on the two sides sitting around 0.1mm apart. The seals snap around quite well, but it doesn't feel as tight. But the rubber ring around the case is kinda thick so I guess that makes up for it.
I've seen many people have their battery door snap off with mild stress though. Definitely something you'd want to watch out for.
Pigpen007 said:
I would thing you'd be better off with an poly urethane screen protector rather than a tempered glass if you're using it in a case. The glass may be too bulky.
Click to expand...
Click to collapse
I'm hoping a 0.2mm case would be a snug fit there, but that's definitely where I'm going if the glass doesn't work out. I just think it's too big a tradeoff as I had numerous good experiences with tempered glasses protecting my screen.
kisetsu17 said:
Yeah maybe that's also one way to look at it. I remember using a battery case that came with a clear plastic layer that caused rainbows to dance around my screen lol.
Good enough--what you'd expect from an average waterproof case. It does have a bit of flex, and it unsettles me a bit that the case I have is a bit bent on the edge with the seam on the two sides sitting around 0.1mm apart. The seals snap around quite well, but it doesn't feel as tight. But the rubber ring around the case is kinda thick so I guess that makes up for it.
I've seen many people have their battery door snap off with mild stress though. Definitely something you'd want to watch out for.
I'm hoping a 0.2mm case would be a snug fit there, but that's definitely where I'm going if the glass doesn't work out. I just think it's too big a tradeoff as I had numerous good experiences with tempered glasses protecting my screen.
Click to expand...
Click to collapse
If you're in US, try to get your hands on iloome glass sp. It's 0.1mm, you can barely feel the screen protector.
Rakcoon said:
If you're in US, try to get your hands on iloome glass sp. It's 0.1mm, you can barely feel the screen protector.
Click to expand...
Click to collapse
Wow, I thought the thinnest I can go is a 0.2mm iCarez one. That's what I got and had shipped here. Waiting for it to arrive (not from the US.)
Related
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
i never bothered because they're so expensive and i screw up the screen anyways so the film type are more easily replaceable
ill probably end up buying 2 or 3 cases and end up using only screen protectors in most situations lol.
to me i rarely drop my phone but i have trouble keeping it out of my pocket with my keys and change, other things. ive been pretty good about it but not perfect.
First off my only problem with tempered glass on my S3 was that it messed with screen responsiveness... Now the ones for the S4 are mostly half the thickness of last years so that should help that problem a lot. The iLoome protector fort the S4 is fully clear and I assume it has adhesive over the entire surface. The sense of mind you get with glass is great. Plus the feel of glass is much better than that of other screen protectors. If you can find one that doesn't take away from screen sensitivity than i'd say it's definitely worth it if you care about your phone.
Sent from my GS3
ichilouch said:
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
Click to expand...
Click to collapse
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
KeithSr said:
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
Click to expand...
Click to collapse
What Brand did you use and how thick was it?
ichilouch said:
What Brand did you use and how thick was it?
Click to expand...
Click to collapse
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
KeithSr said:
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
Click to expand...
Click to collapse
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Spigen film is the way to go... $14 for two protectors and easy to install...
Just watched a review of the Spigen Glas.tR and it is also CLEAR!
Sent from my GS3
I had a glass protector on my GS3 (XGear Spectre, I think) and it worked fine - no loss of sensitivity. It did allow some tiny dust in, but it was easy to lift and wipe it out the couple of times it happened over 8 months. And the week before my S4 came in, I managed to drop the S3 on its face...the screen protector cracked, and the phone is still perfect. Looking at the Spigen one next week just because of that.
Asmodian3 said:
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Click to expand...
Click to collapse
Okay, I found the ad for the flexible glass protector. I ordered it on eBay, this one is very similar even though it is for the Note 2: http://www.ebay.com/itm/Samsung-Gal...193&pid=100040&prg=1011&rk=1&sd=230950051927&
I love this screen protector and am hoping that I will be able to get one for the new S4.
---------- Post added at 12:21 PM ---------- Previous post was at 12:08 PM ----------
I also had the one everyone was talking about at this thread: http://forum.xda-developers.com/showthread.php?t=1920757
But, like someone said previously, it had adhesive only on the outside edges and dust or dirt could get underneath the protector.
I ended up breaking it on the corner when I removed it to clean beneath it.
That does look like a nice one.
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
bobbydsiu said:
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
Click to expand...
Click to collapse
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
thacounty said:
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
Click to expand...
Click to collapse
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
spigen GLAS.tr for what phone?
bobbydsiu said:
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
Click to expand...
Click to collapse
Spigen GLAS.t SLIM = non-rounded borders - (0.23mm) - thinner
Spigen GLAS.tR SLIM = rounded borders (0.4mm)
You're correct the t is the thinner material. Either way it feels great and installs fairly easily.
I had the glas for the s2, I LOVED(easy to clean the screen of finger oils) it, however, it attracted dust underneath the screen protector due to adhesive being only at the edges, I took it off after a couple of months. With the full adhesive, i will definitely buy again for my soon to arrive S4. Especially since I just dropped my s2 face down on the ground and broke the screen a couple weeks back (without case), the glas would serve as a shield.
Hi all,
I am generally very good with phones and rarely damage them. That said my S4 has developed a crack in the midframe and a small dent on the front bezel frame, perhaps from just being in my pocket. I don't keep keys or anything in the same pocket so I'm not sure how it happened.
I have been using the ZAGG Glass screen protector on it and LOVE it. It is the clearest and smoothest protector I have ever used.
I think I want side protection for this thing. I probably should have protection since I work in active environments.. sometimes dusty..
A couple questions:
Once this case is on, how easy is it to take off to say, change microSD or swap batteries?
Will this case work if I use the ZAGG glass screen protector? This protector goes bezel to bezel PERFECTLY, although it does not cover the earpiece or sensor windows at the top.
Thoughts?
The case is very tough to take off, but it's not all bad because it has a tight seal for its water resistance. And secondly, it'll fit with the screen protector but it will not be water proof anymore, the glass is too thick. Hope this helps
Sent from my SPH-L720 using Tapatalk
tylerjames09 said:
The case is very tough to take off, but it's not all bad because it has a tight seal for its water resistance. And secondly, it'll fit with the screen protector but it will not be water proof anymore, the glass is too thick. Hope this helps
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Hmm, might be a deal breaker! Anyone know of a thin case that mostly just offers side drop protection but works with the glass screen protector?
Tech 21 impact mesh case. It is very light weight and offers crazy good protection!
Sent from my SCH-I545 using Tapatalk
Hi,
I haven't been using Lifeproof nuud case, but couple weeks ago I was looking for case for my Galaxy S4 and I bought Seidio Obex with holster and in my opinion it is very good case.
It is really waterproof case (I've checked it), dust proof (most important for me), impact proof and has built in screen protector (is giving amazing touch).
But there is couple things which are not so good, first of all sound is a bit muffled and second thing is that some ppl will complain about it size, but for me it isn't so important.
As a conclusion, I can only say that, for me personally it was really good purchase and I'm looking to buy additional car mount to holster.
muzicman82 said:
Hmm, might be a deal breaker! Anyone know of a thin case that mostly just offers side drop protection but works with the glass screen protector?
Click to expand...
Click to collapse
I've had the spigen slim armor case since I've bought the phone and I couldn't ask for anything more, slim, very protective, and looks great.
I'm wondering about the match of these two together... around the edges. Being an epileptic I really don't prefer the thinnest possible glass as it's not only dropping the phone I'm worried about. Epilepsy is kind of an "uncontrolled breakdance disease" so phone abuse might be more violent than just a regular drop in the pavement. But what glass thickness will an Otterbox Commuter allow around the edges... if it actually goes far enough over the phone's edges to reach the tempered glass. (I don't know that either, since I haven't bought the case yet.)
Are there any experiences out there? Thickness suggestions? Maybe suggestions of glass covers if it's a "some will and some won't" issue?
Berthaconners524 said:
I have the commuter, and a regular "non-glass" screen protector. I've been doing a lot of reading about the glass, and the general consensus is that it does break with wear, usually pretty easily. I have a friend at work whose daughter has epilepsy, and I understand your concern. Best of luck to you, dear.
Click to expand...
Click to collapse
Everything breaks with wear. That's one of the things we can't get around. But I do think that a tempered glass layer has more to offer than the thin plastic film when it comes to abuse that's worse than keys and coins... and even if the hit breaks the screen protector, chance is still good that the phone's display will be intact.
Not to forget the bonus that comes with a glass protector... a glass display feels much nicer.
Berthaconners524 said:
I understand that all things do break with wear, but I suppose I cannot comment on the aesthetic of the glass, as I've never tried it yet. But I guess I just like my piece of plastic. I have no complaints. But I might be an exception, and I'm fine with that.
Click to expand...
Click to collapse
I'm not the picky type myself. I have no problem enjoying my phone like it is today, with a (cheap) fingerprint attracting and bubbly plastic protector. The extra protection is all that I'm after... and if the glass protector comes with a nicer feeling, I just have to live with it. :silly:
I've seen somebody with this combo before. It actually fit nicely. He was using a bodyguards protector I think. Whatever one they sell at the AT&T store.
I just ordered my new Moto X 2014, I'm actually getting it for free to replace my old Moto X.
What are some good case and screen protector combinations? I know in the past I've had some trouble with a case AND a screen protector, it's sometimes one or the other. I'd prefer a clear case, but I'll probably end up getting more than 1 anyways.
blueice5249 said:
I just ordered my new Moto X 2014, I'm actually getting it for free to replace my old Moto X.
What are some good case and screen protector combinations? I know in the past I've had some trouble with a case AND a screen protector, it's sometimes one or the other. I'd prefer a clear case, but I'll probably end up getting more than 1 anyways.
Click to expand...
Click to collapse
Just got mine as well here is what I have found so far:
All tempered glass is a waste of money for this model none if it fits right at all due to the rounded edges
I would ASSUME the older plastic style ones MIGHT work better but read they also dont work that well
Most cases that say they are clear are actually frosted and that for me defeats the purpose of customizing the back
So I am going naked screen and hula case and will carry the phone in a belt pouch. Not the perfect solution but for me its acceptable. I would have preferred a strong clear tpu case (most turn yellow), I dont want a hard case, and would have love tempered glass on this but they simply dont adhere correctly.
There you have it the sad but true facts about cases and screen protectors from the research I have done. Hopefully some others in here can give you better news
adm1jtg said:
Just got mine as well here is what I have found so far:
All tempered glass is a waste of money for this model none if it fits right at all due to the rounded edges
I would ASSUME the older plastic style ones MIGHT work better but read they also dont work that well
Most cases that say they are clear are actually frosted and that for me defeats the purpose of customizing the back
So I am going naked screen and hula case and will carry the phone in a belt pouch. Not the perfect solution but for me its acceptable. I would have preferred a strong clear tpu case (most turn yellow), I dont want a hard case, and would have love tempered glass on this but they simply dont adhere correctly.
There you have it the sad but true facts about cases and screen protectors from the research I have done. Hopefully some others in here can give you better news
Click to expand...
Click to collapse
I don't mind a hard case and not a fan of the glass screen protectors. I like the film ones. My last film protector made it a matte screen and took the glare away. It was fantastic! And it worked with the case. But it's the only smartphone that I've had where screen protector AND case can be used.
blueice5249 said:
I don't mind a hard case and not a fan of the glass screen protectors. I like the film ones. My last film protector made it a matte screen and took the glare away. It was fantastic! And it worked with the case. But it's the only smartphone that I've had where screen protector AND case can be used.
Click to expand...
Click to collapse
I guess no one else has found better solutions. The naked case is a decent hard clear case though expensive and also prone to yellowing
adm1jtg said:
I guess no one else has found better solutions. The naked case is a decent hard clear case though expensive and also prone to yellowing
Click to expand...
Click to collapse
It's either going to be the Gelli Black Frost case or the Hula Bumper case initially. I'm getting one of those for free if I buy a screen protector, which I was going to do anyways.
I just can't get anyone to tell me what one of those cases, if any, work with a screen protector. I've been trying to get someone to answer this question for 2-3 days now. Nobody on earth knows! lol
blueice5249 said:
It's either going to be the Gelli Black Frost case or the Hula Bumper case initially. I'm getting one of those for free if I buy a screen protector, which I was going to do anyways.
I just can't get anyone to tell me what one of those cases, if any, work with a screen protector. I've been trying to get someone to answer this question for 2-3 days now. Nobody on earth knows! lol
Click to expand...
Click to collapse
I have the hula bumper case and i can't see any reason it would interfere at all with a screen protector. When I tried my glass protector it was in combination with the hula. Honestly thought most screen protectors are so think that they can be used with almost any case.
adm1jtg said:
I have the hula bumper case and i can't see any reason it would interfere at all with a screen protector. When I tried my glass protector it was in combination with the hula. Honestly thought most screen protectors are so think that they can be used with almost any case.
Click to expand...
Click to collapse
The glass is usually cut thinner, the film isn't always cut thinner and I've had instances where the cases would peel up the edges of the film. How did you like you Hula?
blueice5249 said:
The glass is usually cut thinner, the film isn't always cut thinner and I've had instances where the cases would peel up the edges of the film. How did you like you Hula?
Click to expand...
Click to collapse
I love the look, not sure it would truly give a huge amount of protection but should protect the edges of the glass on the screen which i read is the most vulnerable part of the phone. It does have a little but of movement when you hold the phone (aka wiggles slightly) but it also adds more grip, i have a plastic backed phone.. Those damn beveled edges, nice concept, nightmare in reality. They are why no glass or other screen protector will truly fit right.
adm1jtg said:
I love the look, not sure it would truly give a huge amount of protection but should protect the edges of the glass on the screen which i read is the most vulnerable part of the phone. It does have a little but of movement when you hold the phone (aka wiggles slightly) but it also adds more grip, i have a plastic backed phone.. Those damn beveled edges, nice concept, nightmare in reality. They are why no glass or other screen protector will truly fit right.
Click to expand...
Click to collapse
How bad is the wiggling? I have a bit of OCD so sometimes things like that will really bug me.
blueice5249 said:
How bad is the wiggling? I have a bit of OCD so sometimes things like that will really bug me.
Click to expand...
Click to collapse
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
These are not my pics but its how my phone looks
https://onedrive.live.com/?cid=89BBC42D0064FA66&id=89bbc42d0064fa66!1491&authkey=!AAcLU2pED71lK04
Also if you can order the hula from case mate rather then moto as moto charges an extra $5 shipping. They are also at times very hard to find in stock anywhere depending on the color you want.
adm1jtg said:
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
These are not my pics but its how my phone looks
https://onedrive.live.com/?cid=89BBC42D0064FA66&id=89bbc42d0064fa66!1491&authkey=!AAcLU2pED71lK04
Also if you can order the hula from case mate rather then moto as moto charges an extra $5 shipping. They are also at times very hard to find in stock anywhere depending on the color you want.
Click to expand...
Click to collapse
I really like the way that looks. My phone is Royal Blue, White Front, and Red Trim. So it's between a white or red hula case, or the gelli case. I'm leaning towards the Hula for more everyday use I think, and buying another case from amazon for when i need more protection. Or buying the hula and getting a good protecting case from moto's website
I have a coupon code from Moto for $25 off, so Im buying the screen protector and I basically get any case for free.
blueice5249 said:
I really like the way that looks. My phone is Royal Blue, White Front, and Red Trim. So it's between a white or red hula case, or the gelli case. I'm leaning towards the Hula for more everyday use I think, and buying another case from amazon for when i need more protection. Or buying the hula and getting a good protecting case from moto's website
I have a coupon code from Moto for $25 off, so Im buying the screen protector and I basically get any case for free.
Click to expand...
Click to collapse
I use the hulu and a cheap leather holster with belt clip to carry it in. Its extremely cheaply made but fits real well.
http://www.amazon.com/gp/product/B001H3ON0W/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I have the Hulu and the Trident Aegis. The plastic on the Hulu cracked at the USB port area (from bending when removed or put on), but it doesn't effect the case
I've been using the Hula bumper and Power Support Brilliant Film screen protector. The edge of the case doesn't contact the screen protector so it doesn't peel.
nbell13 said:
I have the Hulu and the Trident Aegis. The plastic on the Hulu cracked at the USB port area (from bending when removed or put on), but it doesn't effect the case
Click to expand...
Click to collapse
Thanks! I heard one other person had a problem with cracking. Very good to know beforehand, I'll make sure to be a bit more careful.
braves10 said:
I've been using the Hula bumper and Power Support Brilliant Film screen protector. The edge of the case doesn't contact the screen protector so it doesn't peel.
Click to expand...
Click to collapse
Thank you! This is exactly what I wanted to know! :highfive::good:
adm1jtg said:
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
Click to expand...
Click to collapse
Weird question, but do you think there's enough give with the Hula case where it would fit around the Moto X in a thin TPU case? I like the TPU cases but worry about the protection or lack thereof. Just wondering if it'd be possible to use them and occasional put the Hula Case around them for extra protection. Of course the buttons probably wouldn't work then...
fldude said:
Weird question, but do you think there's enough give with the Hula case where it would fit around the Moto X in a thin TPU case? I like the TPU cases but worry about the protection or lack thereof. Just wondering if it'd be possible to use them and occasional put the Hula Case around them for extra protection. Of course the buttons probably wouldn't work then...
Click to expand...
Click to collapse
You wont be able to use the two together, to much of a lip on the back with the hula case. Even if you did somehow fit it on the tpu would never touch the back of the phone just the lip around the edge. TPU will likely give more protection then hula but hula will likely give more grip then a tpu case.
New to the X, is it worth while getting a screen protector? Case is on its way, but with Gorilla Glass 3, is it truly worth the extra to cover the screen? Probably will end up with one but wanted some other opinions!
xKroniK13x said:
New to the X, is it worth while getting a screen protector? Case is on its way, but with Gorilla Glass 3, is it truly worth the extra to cover the screen? Probably will end up with one but wanted some other opinions!
Click to expand...
Click to collapse
That is completely up to you but I can tell you this based on my research and personal experience:
There is not a tempered glass screen protector on the market for the 2014 that adheres properly. Not one of them works well and thus dont bother with those. The 2014 tapered edges on the glass are the issue. I have HEARD of similar issues with PET style screen protectors but never messed with those as they never felt right to me.
Lastly everything I have read says those tapered edges o the glas DO make it more prone to crack or brake on a drop so you need SOMETHING to protect the glass edges. Full case, hula bumper, something....
blueice5249 said:
Thanks! I heard one other person had a problem with cracking. Very good to know beforehand, I'll make sure to be a bit more careful.
Click to expand...
Click to collapse
A lot of the cracking that people report is from dropping their phones, not taking the Hula on and off. The Hula is designed to absorb the shock of a drop and it breaks so that the phone does not. Better that your $20 bumper break than your $600 phone.
I take my Hula off and on all of the time and it has never cracked. I think people are dropping their phones and the Hula is doing exactly what it is supposed to do - absorbing the shock, which can result in it cracking instead of your phone.
So I had the similar Artech 21 case for the Note 5 which is the same people that make the Armadillo Tek case for the Note 9.
I liked the Note 5 case and built in screen protector but I was wondering about the built in screen protector on the Note 9 case since it's curved so the material is different.
Also, has anyone removed the built in screen protector and if so does it cause the phone to be loose in the case?
I'm waiting for more reviews on this case before ordering off Amazon but it looks decent.
How is the protection of the case compared to the Samsung rugged cover
interested in feedback as well.
Blues fan said:
So I had the similar Artech 21 case for the Note 5 which is the same people that make the Armadillo Tek case for the Note 9.
I liked the Note 5 case and built in screen protector but I was wondering about the built in screen protector on the Note 9 case since it's curved so the material is different.
Also, has anyone removed the built in screen protector and if so does it cause the phone to be loose in the case?
I'm waiting for more reviews on this case before ordering off Amazon but it looks decent.
How is the protection of the case compared to the Samsung rugged cover
Click to expand...
Click to collapse
The case is solid. The screen protector left much to be desired. I removed it easily and the phone still stays solidly in place. It is more protective than the Samsung rugged case but not as slim. I'd feel comfortable dropping it in the armadillo case. Here's a video review I did of it:
https://www.youtube.com/watch?v=px2roiwe7UM
I have the case as well, I honestly bought like 4 different cases for the Note 9 before I got it, and one of them being the Spigen ToughArmor case and the Armadillotek. I have to say just for protection overall, the AT is way better than the Spigen case. It protects the phone more while not being that bulky, it is slightly less comfortable to hold because of the weird design and kickstand on the back, but its way better than essentially the toothpick that's on the back of Spigen cases.
The case itself covers the front of the phone a lot better than the Spigen as well (edges are raised slightly higher, the case actually covers some of the exposed glass around the sensors and the chin of the phone). It is slightly more expensive, but I'd recommend it to anyone who's scared of dropping their phone tbh.
I didn't bother with the built in screen protector, I don't like plastic screen protectors because they're too scratch prone, but it was easy to just punch it out, remove the adhesive, and just use your own glass screen protector.
It's near perfect, but if the back didn't feel a little weird, I'd say it's a perfect case
Yea, the built in screen protectors in these cases like the Armadillo, Supcase, Youmaker, etc. don't seem really good due to the curved screen. When the galaxy had a flat screen it was fine because a different material was used.
The only think I don't like at least on the Supcase, others as well as the Artech 21 case was the port covers. Unlike the Otterbox Defender it seems over time they can crack.
Right now I use the Defender mostly due to the extra big lip and better side protection.
I might go on a case binge and order the Supcase and Youmaker though but I will for sure the punch out the screen protector. I keep nothing in my phone pocket and the lips on these cases are enough I don't have to worry about contact with the ground.
The Samsung rugged case is a very well built case though. Except I prefer something with more girth like the Otterbox Defender. The Defender makes it easier to grip and use spen.
I'm enjoying it so far. I can type and swype jus like normal, no aggravating mistypes and dead spots. Jus yesterday I was noticing that my screen had some fine scratches on it, and I might keep this plastic protector on for a while. As far as the case, I have used some similar in the past and it is very protective. I also like how it connects together. I don't have to worry if it will come apart.
grmcrkrs said:
I'm enjoying it so far. I can type and swype jus like normal, no aggravating mistypes and dead spots. Jus yesterday I was noticing that my screen had some fine scratches on it, and I might keep this plastic protector on for a while. As far as the case, I have used some similar in the past and it is very protective. I also like how it connects together. I don't have to worry if it will come apart.
Click to expand...
Click to collapse
Those marks might not be scratches but just from the spen. Just like on a naked screen you will notice the spen leaves marks. All you need to do is just wipe it off.
Either way, the screen protectors suck on these cases. Better off just popping them off and go bare. Just don't put keys in your pocket with the phone.
I ripped off the plastic screen protector and installed an edge-to-edge tempered glass one. It works great on me.
I had to rip the plastic cover off as well.
grmcrkrs said:
I had to rip the plastic cover off as well.
Click to expand...
Click to collapse
So the built in screen protector isn't really that good?
It does protect the screen. But the edges don't hug the screen super tight, about 1 centimeter around or over the curve. This slight space causes me to have to press a little harder than I'm used to, and that causes mistypes and unresponsive touch, about 1/10 times when I touch that space.
grmcrkrs said:
It does protect the screen. But the edges don't hug the screen super tight, about 1 centimeter around or over the curve. This slight space causes me to have to press a little harder than I'm used to, and that causes mistypes and unresponsive touch, about 1/10 times when I touch that space.
Click to expand...
Click to collapse
did you turn on the 'touch sensitivity' ?
yes, I sure did. Like I say, 99% of the time was fine, but the edges of the screen protector, the tiny part over the curved edge, was slightly raised with an air gap. So it caused mistypes.
jinshanghaiaraol said:
I ripped off the plastic screen protector and installed an edge-to-edge tempered glass one. It works great on me.
Click to expand...
Click to collapse
I did too, I have the white glass dome. Hehe
Majin101 said:
I did too, I have the white glass dome. Hehe
Click to expand...
Click to collapse
The whitestone glass screen protector is great.
all screen protector sucks! Only use Whitestone tempered glass screen protector for noW
This case is a monster when you use the glass SP with it !
I have a armadillo tek case and i think it sucks
The screen protector is a piece of **** and they told me up front to rip it off, and also the headphone jack and charger jack covers wont stay closed and they told me tough **** to that one.
Also the charger port is too small to allow the samsung usb on the go port to be inserted