Related
My Note Edge N915F volume down stopped working
i wanted to know if it's software so i went to safe mode, but nothing brought it out of safe mode.
so i flashed the latest Firmware but i realized the (( Nand Erase all )) option was on, ( laptop is touch screen )
now the phone is in boot loop. i reflashed the firmware but nothing.
i can't go to Recovery mode because volume doesn't work but i can only go to download mode with on OTG device i bought before.
is there anything i can do to fix it?
anyone can help? i have a dead expensive phone on my hand now.
omid_freesky said:
anyone can help? i have a dead expensive phone on my hand now.
Click to expand...
Click to collapse
try to flash custom recovery, if any available there... wipe data and cache, then you need to install stock rom. so download stock rom for your country first.
Maybe it helps.
omid_freesky said:
anyone can help? i have a dead expensive phone on my hand now.
Click to expand...
Click to collapse
You may need to take back to Samsung...
No-one wants to give advice that can get you deeper into trouble than you already are...
Let this be a lesson, before you hit "start" make sure nothing but reset and f-reset time is ticked... All else can cause serious problems... Hopefully won't be an expensive lesson...
opethianskies said:
try to flash custom recovery, if any available there... wipe data and cache, then you need to install stock rom. so download stock rom for your country first.
Maybe it helps.
Click to expand...
Click to collapse
here is the problem, i can't go to recovery because volume down didn't work, and this is why i end up flashing firmware.
i want to know if there is another way to go to recovery .
ultramag69 said:
You may need to take back to Samsung...
No-one wants to give advice that can get you deeper into trouble than you already are...
Let this be a lesson, before you hit "start" make sure nothing but reset and f-reset time is ticked... All else can cause serious problems... Hopefully won't be an expensive lesson...
Click to expand...
Click to collapse
i can take any advice at this point. i can't take it to samsung because i might be the only one who owns this phone here. the local service said they can do nothing.
i've flashed a million times and this is the first time this happened to me. and Yes it is an expensive lesson, $1,200 expensive
omid_freesky said:
here is the problem, i can't go to recovery because volume down didn't work, and this is why i end up flashing firmware.
i want to know if there is another way to go to recovery .
Click to expand...
Click to collapse
you don't have to go into the recovery, you need to go download mode and flash custom recovery there...
feel sorry for you, custom roms or the roms that are not verified by samsung, are risky as hell. I flashed my Note II million times, but now i'm not interfering with my Note Edge.
may be you had better bring your phone to an authorized service. this doesn't seem to be a software problem.
opethianskies said:
you don't have to go into the recovery, you need to go download mode and flash custom recovery there...
feel sorry for you, custom roms or the roms that are not verified by samsung, are risky as hell. I flashed my Note II million times, but now i'm not interfering with my Note Edge.
may be you had better bring your phone to an authorized service. this doesn't seem to be a software problem.
Click to expand...
Click to collapse
i flashed the custom recovery, nothing changed.
unfortunately we don't have authorized service here.
omid_freesky said:
i flashed the custom recovery, nothing changed.
unfortunately we don't have authorized service here.
Click to expand...
Click to collapse
Have you tried to flash stock rom for your country. Go sammobile and find your stock rom for your country, at least you can open your phone again.
opethianskies said:
Have you tried to flash stock rom for your country. Go sammobile and find your stock rom for your country, at least you can open your phone again.
Click to expand...
Click to collapse
it is the first thing i did, i flashed stock Firmware when the Nand Erase all was accidentally on, and i flashed it again (without Nand) but it didn't fix.
Possibly your phone has gone into bootloop. Release the battery for one minute. Then plug the battery again, Try to flash Rom with an higher Odin version...
However I found a solution in XDA
Quote:
Originally Posted by samersh72 View Post
before flashing param.tar. go into recovery, if it is possible, wipe data and cache, then flash with odin the stock firmware in pda with the pit file in pit window. just check auto reboot, f.reset and re-partition. when it say "pass" remove battery, re-insert it, go to recovery, wipe data and cache reboot.
if it didnt work, unzip attached file and flash "param_I9505.tar" in pda. (without pit file)(dont tick re-partition)
im afraid that ticking "nand erase all" in odin, usually lead to a hard brick!
Duuude! It worked!!!!
Even without flashing param partition. Just the first step:
Quote:
go into recovery (I flashed CWM with Odin), if it is possible, wipe data and cache, then flash with odin the stock firmware in pda with the pit file in pit window. just check auto reboot, f.reset and re-partition. (then it went into bootloop as usual and after a moment Odin said "pass") when it say "pass" remove battery, re-insert it, go to recovery (the recovery at that moment returned to stock), wipe data and cache reboot.
And ta-daaa! It works now. Ahhh! that was close! )))
You should write this instruction for [email protected] like me.
You can't imagine how I'm grateful to you!
opethianskies said:
if it didnt work, unzip attached file and flash "param_I9505.tar" in pda. (without pit file)(dont tick re-partition)
Click to expand...
Click to collapse
The param_I9505.tar this refers to is for the Note 4(international). Are you REALLY sure this won't cause more problems? It's hard enough to fix something when you don't know what's wrong but adding another ingredient into the mix can REALLY make the brown stuff hit the whirlygig...
Also, Op shouldn't have flashed custom recovery, you need to send back to Samsung... Its possible you may have triggered the Knox warranty void. You may have to pay $$$ now to get it fixed....
Fooling around more will make sure you have a $1200 paperweight...
ultramag69 said:
The param_I9505.tar this refers to is for the Note 4(international). Are you REALLY sure this won't cause more problems? It's hard enough to fix something when you don't know what's wrong but adding another ingredient into the mix can REALLY make the brown stuff hit the whirlygig...
Also, Op shouldn't have flashed custom recovery, you need to send back to Samsung... Its possible you may have triggered the Knox warranty void. You may have to pay $$$ now to get it fixed....
Fooling around more will make sure you have a $1200 paperweight...
Click to expand...
Click to collapse
yeah it's solution for note 4 but i assumed that he already knew that... OP must have flashed proper file for his phone... I'M not referring Note 4 here.
So, i was trying to flash a ROM after i got my recovery and root going on, i wiped EVERYTHING INCLUDING THE recovery file i made and the installation file i got in the phone when i went to wipe the system files and attempt to install the ROM. So, i tried to put the ROM files into my phone via the ADB method. It worked but my ROM didn't and now my S6 is in a boot loop. i have tired Odin, smartwatch and kies. On kies and smart watch, they both said the attempt to install stock ROM failed and attempt a emergency recovery. HOWEVER, both software did not recognize my device in the emergency recovery devices list, nor did it recognize it as a compatible device in the 1st place, i tired to reinstall the drivers and the software themselves but nothing worked. For Odin, it keeps on saying fail to flash as well, it usually stuck on the 'nano write' process or 'setting up connection' process for a long time too! I did download the official Samsung firmware and extracted it, put it into the blank next to the 'AP' button in odin and i got 'Auto Reboot' and 'F. Reset Time' checked off. On the phone, i can boot in to download mode and download mode only, now it shows me a triangle and it says that stock firmware flash failed and use emergency recovery. i actually download a custom recovery and for some reason it wont boot into that.
Model number: SM-G920W8
carrier: fido
If any of you pros got any ideas please share with me, i've been trying to fix this problem for about a day and a night.
try "nand erase all" in odin while flashing the stock fido rom
noob924 said:
try "nand erase all" in odin while flashing the stock fido rom
Click to expand...
Click to collapse
well it either says fail or stuck in set up connection
Use smart switch
shahram Ali said:
Use smart switch
Click to expand...
Click to collapse
like i said man, both kies and smartwatch don't work.
BigBlackCook said:
like i said man, both kies and smartwatch don't work.
Click to expand...
Click to collapse
it should work !!
shahram Ali said:
it should work !!
Click to expand...
Click to collapse
On kies and smart swich, they both said the attempt to install stock ROM failed and attempt a emergency recovery. HOWEVER, both software did not recognize my device in the emergency recovery devices list, nor did it recognize it as a compatible device in the 1st place, i tired to reinstall the drivers and the software themselves but nothing worked. I even contacted Samsung and they said that it won't work because my device is rooted. i've seen videos of it working but not for me, did i do anything wrong or did i miss anything?
BigBlackCook said:
On kies and smart swich, they both said the attempt to install stock ROM failed and attempt a emergency recovery. HOWEVER, both software did not recognize my device in the emergency recovery devices list, nor did it recognize it as a compatible device in the 1st place, i tired to reinstall the drivers and the software themselves but nothing worked. I even contacted Samsung and they said that it won't work because my device is rooted. i've seen videos of it working but not for me, did i do anything wrong or did i miss anything?
Click to expand...
Click to collapse
dude dont use emergency recovery use device initialization
shahram Ali said:
dude dont use emergency recovery use device initialization
Click to expand...
Click to collapse
IT WORKED!!! idk why it didint work the 1st damn time but i guess it's the usb connection or what not. Now it workes, time to root again and re-uninstall the bloat ware.. prob wont install a rom tho btw.. since ur a pro, what else do ppl do afterthey root their phone? other then to uninstall bloatware
BigBlackCook said:
IT WORKED!!! idk why it didint work the 1st damn time but i guess it's the usb connection or what not. Now it workes, time to root again and re-uninstall the bloat ware.. prob wont install a rom tho btw.. since ur a pro, what else do ppl do afterthey root their phone? other then to uninstall bloatware
Click to expand...
Click to collapse
ahaha congratulations dude but take back up of your EFS cause bricking sometimes make it gone take a back up and keep it somewhere safe and add solved near thread title
shahram Ali said:
ahaha congratulations dude but take back up of your EFS cause bricking sometimes make it gone take a back up and keep it somewhere safe and add solved near thread title
Click to expand...
Click to collapse
what's EFS?
BigBlackCook said:
what's EFS?
Click to expand...
Click to collapse
it is youre imei wifi etc it is important thing to back up
shahram Ali said:
it is youre imei wifi etc it is important thing to back up
Click to expand...
Click to collapse
yeah cause with out the S/R, smart swich won't work D: good thing is that the sticker on the bak of my phone has all that info on it, it kinda saved my life.
BigBlackCook said:
yeah cause with out the S/R, smart swich won't work D: good thing is that the sticker on the bak of my phone has all that info on it, it kinda saved my life.
Click to expand...
Click to collapse
yeah it is
shahram Ali said:
yeah it is
Click to expand...
Click to collapse
about roms, i still got 5.1.1 so if i want to install a rom, does it matter? or is it just about finding the 1 for your model. i want to install XtreStoLite but some versions have android 6.0 in the title and some have 5.1.1, and why don't posts about roms have any comments?
BigBlackCook said:
about roms, i still got 5.1.1 so if i want to install a rom, does it matter? or is it just about finding the 1 for your model. i want to install XtreStoLite but some versions have android 6.0 in the title and some have 5.1.1, and why don't posts about roms have any comments?
Click to expand...
Click to collapse
If u want 6.0.1 and i recommend to use 6.0.1 u need 6.0.1 bootloader and modem and ur phone is canadian so find an w8 rom but flash 6.0.1 modem and bootloader
shahram Ali said:
If u want 6.0.1 and i recommend to use 6.0.1 u need 6.0.1 bootloader and modem and ur phone is canadian so find an w8 rom but flash 6.0.1 modem and bootloader
Click to expand...
Click to collapse
so u ned to flash boot loaders and modem? damn maybe dats why that rom bricked my phone LOL
BigBlackCook said:
so u ned to flash boot loaders and modem? damn maybe dats why that rom bricked my phone LOL
Click to expand...
Click to collapse
If you flashed 6.0.1 rom on 5.1.1 bootloader maybe
shahram Ali said:
If you flashed 6.0.1 rom on 5.1.1 bootloader maybe
Click to expand...
Click to collapse
LOL i got it bricked again after installing both the boot loader and a modem.. i did them 1 by 1 and for some reason it says success in odin but had to reinstall firmware again to make my s6 work.. how do people install rom these days..
BigBlackCook said:
LOL i got it bricked again after installing both the boot loader and a modem.. i did them 1 by 1 and for some reason it says success in odin but had to reinstall firmware again to make my s6 work.. how do people install rom these days..
Click to expand...
Click to collapse
dude install stock then flash twrp and use ur model number rom not others 6.0.1
Hi,
So I was trying to root my phone and it all went wrong. I have rooted tons of phones before, but never a Samsung (never again).
The phone will show the Samsung Boot screen, but then it either goes black, with a flashing blue LED, or it boots itself into recovery.
When I use ODIN, the flash fails at "system.img.ext4" whenever I use just the AP field. If I load all the fields in, it fails at "xbl.elf"
I got the firmware file from SamMobile, so I don't think that is the issue, but who knows. It's as if the phone no longer has an OS on it. I also tried using SmartSwitch as well, but I have no idea what the S/N on this phone is. It was originally a Sprint phone and was working fine, but I could never find the S/N. It is nowhere on the phone itself, and was not listed when I typed #*06#. All I have is the IMEI.
Finally, when it is in recovery, there is a message at the bottom that reads, "dm-verity verification failed".
Sorry for the bullet point style here, I am on mobile. If anyone can assist, I would be very grateful!
ebercon said:
Hi,
So I was trying to root my phone and it all went wrong. I have rooted tons of phones before, but never a Samsung (never again).
The phone will show the Samsung Boot screen, but then it either goes black, with a flashing blue LED, or it boots itself into recovery.
When I use ODIN, the flash fails at "system.img.ext4" whenever I use just the AP field. If I load all the fields in, it fails at "xbl.elf"
I got the firmware file from SamMobile, so I don't think that is the issue, but who knows. It's as if the phone no longer has an OS on it. I also tried using SmartSwitch as well, but I have no idea what the S/N on this phone is. It was originally a Sprint phone and was working fine, but I could never find the S/N. It is nowhere on the phone itself, and was not listed when I typed #*06#. All I have is the IMEI.
Finally, when it is in recovery, there is a message at the bottom that reads, "dm-verity verification failed".
Sorry for the bullet point style here, I am on mobile. If anyone can assist, I would be very grateful!
Click to expand...
Click to collapse
I'm new to the s7. long time lg man
on lg ussally means either ure trying to flash a non signed image or downgrade a qfused bootloader anti rollback which sprint is good for.
in dl mode after fail its not showing anything about binary and stuff in red is it
TheMadScientist420 said:
I'm new to the s7. long time lg man
on lg ussally means either ure trying to flash a non signed image or downgrade a qfused bootloader anti rollback which sprint is good for.
in dl mode after fail its not showing anything about binary and stuff in red is it
Click to expand...
Click to collapse
It does say something about binary in there. Binary 3 I believe. I'll have to try again to get the error.
ebercon said:
It does say something about binary in there. Binary 3 I believe. I'll have to try again to get the error.
Click to expand...
Click to collapse
sounds the firmware u are flashing is older than what you have on the device hence the fail
try to find newer firmware and try flashing it
download
Download official nougat from sam mobile then flash with Odin. It will definitely solve your problem
amol6630 said:
Download official nougat from sam mobile then flash with Odin. It will definitely solve your problem
Click to expand...
Click to collapse
I may try this as well. I flashed the newest firmware I could find other than Nougat and I now have it booting all the way up and then after about a minute, it loops again. It is at least further along than before.
I just remembered one detail: The original issue began when I flashed a modified boot.img to the phone during a rooting attempt. Could this be what is still causing the issue and preventing a reformatting of the phone from solving the issue? So lost with this thing...
Try with latest firmware + pit file + tick re-partition
ebercon said:
I may try this as well. I flashed the newest firmware I could find other than Nougat and I now have it booting all the way up and then after about a minute, it loops again. It is at least further along than before.
I just remembered one detail: The original issue began when I flashed a modified boot.img to the phone during a rooting attempt. Could this be what is still causing the issue and preventing a reformatting of the phone from solving the issue? So lost with this thing...
Click to expand...
Click to collapse
Sorry to revive this thread but did this work cause its currently happening to me
If your phone is an original, S/N may be engraved in the back... it's a little bit hard to note but put a spotlight near it so that you can identify it better.
hhh ^^
Ok, here goes.
Have a SM-G930W8 (Canada, Rogers, S7). Was running a 7.0 ROM from XDA (ambassadii? sp?). I disabled developer options to check a possible issue transferring files from my PC to the S7's SD Card. I restarted the device.
Custom binary blocked by FRP lock. No problem, thought I. I'll boot into Download Mode, fire up Odin and flash the stock rom back to the device (also what I've read in most every thread I've come across). Launch ODIN as admin, see the device is connected, select the proper AP(also BL, CSC and CP...I'm thorough) file to flash (from Sammobile I think it was), make sure repartition is unchecked and hit Start.
Here's the result...wait I can't post them but I have the screen shots! The phone shows Secure Check Fail (PIT). Odin gives an error at that step as well.
I've tried Kies (there's no SN anywhere on my device or on the box) so that doesn't work. Smart Switch, same issue.
Does ANYONE out there have any clue what I can attempt next? Sending it in for service will likely cost as much as a new device, with the warranty void. Thank you very much in advance.
chewtoy0 said:
Ok, here goes.
Have a SM-G930W8 (Canada, Rogers, S7). Was running a 7.0 ROM from XDA (ambassadii? sp?). I disabled developer options to check a possible issue transferring files from my PC to the S7's SD Card. I restarted the device.
Custom binary blocked by FRP lock. No problem, thought I. I'll boot into Download Mode, fire up Odin and flash the stock rom back to the device (also what I've read in most every thread I've come across). Launch ODIN as admin, see the device is connected, select the proper AP(also BL, CSC and CP...I'm thorough) file to flash (from Sammobile I think it was), make sure repartition is unchecked and hit Start.
Here's the result...wait I can't post them but I have the screen shots! The phone shows Secure Check Fail (PIT). Odin gives an error at that step as well.
I've tried Kies (there's no SN anywhere on my device or on the box) so that doesn't work. Smart Switch, same issue.
Does ANYONE out there have any clue what I can attempt next? Sending it in for service will likely cost as much as a new device, with the warranty void. Thank you very much in advance.
Click to expand...
Click to collapse
Are you able to boot into recovery?
If not you could try to ONLY flash the stock recovery>boot recovery>wipe everything then boot to download mode and flash complete stock firmware via odin.
or flash stock firmware with the same CSC as your custom rom has/ flash "HOME_CSC" instead of "CSC..."
good luck
mrd0pe said:
Are you able to boot into recovery?
If not you could try to ONLY flash the stock recovery>boot recovery>wipe everything then boot to download mode and flash complete stock firmware via odin.
or flash stock firmware with the same CSC as your custom rom has/ flash "HOME_CSC" instead of "CSC..."
good luck
Click to expand...
Click to collapse
Can't get into Recovery no. Which file of the lot has the stock recovery in it?
chewtoy0 said:
Can't get into Recovery no. Which file of the lot has the stock recovery in it?
Click to expand...
Click to collapse
Try to only flash AP, I did have the same problem as you describe but I cant remember how I resolved it, I'm on G930F tho
Your S/N is on the rear of the phone it can be a pain to see but it is there. Use smart switch to restore the firmware. Just click emergency firmware restore.
It is? The IMEI is there but I didn't see the SN. Also my phone is black so that doesn't help.
I will have another look.
mrd0pe said:
Try to only flash AP, I did have the same problem as you describe but I cant remember how I resolved it, I'm on G930F tho
Click to expand...
Click to collapse
I did that. No dice.
I had the same issue as you. Used the same rom and disabled developer options. I downloaded stock firmware.. flashed it with odin. It actually took 2 tries. The first time I could see only 1/4 of the screen. The second time i flashed stock firmware from another country and it worked. You might actually have to do a hard factory reset if you cant unlock your phone.. for some reason. Then I let kies do its magic because I could then see my S/N. Right now I still feel my phone slightly different. Messenger is unstable for some reason also.
Ok.
Checked the back of the device for a SN#. Mine's black so I used a flashlight. It's not there. The Model #, IMEI, FCC ID# and IC# are all there. Does someone have a blurred out screeny of where THEY found their SN# on the back of the device?
Tried flashing with Odin the CSC(home) and AP files (stock MM from my region). Got: Custom Binary (Boot) blocked by FRP Lock.
Tried flashing TWRP again, to TRY to enter into recovery...same message.
With just the AP selected, ODIN seems to hang at "Get PIT for mapping" and fails. I'm running it again to make sure it's not a bad connection with the device.
Same result, hangs at "Get PIT for mapping".
chewtoy0 said:
Ok.
Checked the back of the device for a SN#. Mine's black so I used a flashlight. It's not there. The Model #, IMEI, FCC ID# and IC# are all there. Does someone have a blurred out screeny of where THEY found their SN# on the back of the device?
Tried flashing with Odin the CSC(home) and AP files (stock MM from my region). Got: Custom Binary (Boot) blocked by FRP Lock.
Tried flashing TWRP again, to TRY to enter into recovery...same message.
With just the AP selected, ODIN seems to hang at "Get PIT for mapping" and fails. I'm running it again to make sure it's not a bad connection with the device.
Same result, hangs at "Get PIT for mapping".
Click to expand...
Click to collapse
Try to flash Nougat firmware, as that was what your custom rom was on right? I dont think it really matters though as I downgraded from stock 7.0 to stock 6.0.1 via odin without errors... But you can try
As an absolute last resort I would try to check the "re-partition"-tab and provide odin with a .pit file, then load everything (BL, AP, CP...) with stock firmware <<<< do this at your own risk, if you are not careful, your phone will be bricked
I am trying to flash MM back to it .
I'm not sure I want to mess with the re partition table...But it's already soft bricked.
Mine is also black. The S/N Is immediately next to the imei number I had to use a flash light to see it but it's deffinatly there.
Matty39856 said:
Mine is also black. The S/N Is immediately next to the imei number I had to use a flash light to see it but it's deffinatly there.
Click to expand...
Click to collapse
I'd show you a photo if I could. The IMEI is by itself on a third line of stuff. There's nothing else around it.
chewtoy0 said:
I'd show you a photo if I could. The IMEI is by itself on a third line of stuff. There's nothing else around it.
Click to expand...
Click to collapse
I'm not sure then. Have you tried flashing the latest unlocked version for your region? I remember on my s6 I had a similar problem that was caused because I was trying to flash a lower version of Android than what I previously had. So ended up flashing the latest unlocked version BTU for my region and it worked. Sorry I can't be of more help. It looks like the latest firmware is still 6.0.1 that's why it's blocking it from downgrading.
Was sent a PM by a person. Was skeptical at first, but in 10 minutes using TeamViewer, they fixed the issue by reflashing the device (as well as repartitioning it properly). I can't thank them enough.
This is the person on Facebook...
Unlock Network FRP Lock Remote Service
I just bought a galaxy s8 plus phone. The Wi-Fi keeps saying turning on, but doesn't actually turn on. It's not my router because I can get my galaxy s7 phone to connect no issue. It's a Samsung G955U and 7.0
Any thoughts?
You can try a factor y reset and or stock firmware
Reinstall. Sometimes stock can be broken as well.
TheMadScientist said:
You can try a factor y reset and or stock firmware
Reinstall. Sometimes stock can be broken as well.
Click to expand...
Click to collapse
Could you guide me to a thread where I can do that? I know I'll need to reinstall Odin and flash everything
vrahn said:
Could you guide me to a thread where I can do that? I know I'll need to reinstall Odin and flash everything
Click to expand...
Click to collapse
First you need your firmware. Which can be found in about phone and baseband.
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/
This is for the U or snapdragon. If yours is differ click firmwares and type in your model select your carriers firmware from the list
TheMadScientist said:
First you need your firmware. Which can be found in about phone and baseband.
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/
This is for the U or snapdragon. If yours is differ click firmwares and type in your model select your carriers firmware from the list
Click to expand...
Click to collapse
Mine is Verizon. SnapDragonG955U. I found the firmware for my phone. Can you direct me to the thread where I can flash the firmware for this phone? Ive found a thread for rooting that is part cyborg. It looks like I can use that to root the phone. But I need to reflash the stock firmware first.
https://forum.xda-developers.com/ga...root-partcyborgrom-aqk3-samfail-odin-t3717702
vrahn said:
Mine is Verizon. SnapDragonG955U. I found the firmware for my phone. Can you direct me to the thread where I can flash the firmware for this phone? Ive found a thread for rooting that is part cyborg. It looks like I can use that to root the phone. But I need to reflash the stock firmware first.
https://forum.xda-developers.com/ga...root-partcyborgrom-aqk3-samfail-odin-t3717702
Click to expand...
Click to collapse
You should be able to just flash this out of the gate
TheMadScientist said:
You should be able to just flash this out of the gate
Click to expand...
Click to collapse
I have the stock firmware. But im unsure of which CSC to use. Here is what I have.
AP_G955USQU2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT_meta.tar.md5.md5
BL_G955USQU2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G955USQU2BQK5_CP8026183_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OYN_G955UOYN2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYN_G955UOYN2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_USC_G955USQU2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
Also, which order do I flash them?
You put ap bl and co in respective slots in Odin. And I use the home csc in csc slot. Flash all together
You won't use the user data
TheMadScientist said:
You put ap bl and co in respective slots in Odin. And I use the home csc in csc slot. Flash all together
You won't use the user data
Click to expand...
Click to collapse
So I tried this and wifi still isnt turning on. Am I missing something?
If software didn't fix. Then it's a hardware issue. But In my life I've seen out like 5 times or so
TheMadScientist said:
You can try a factor y reset and or stock firmware
Reinstall. Sometimes stock can be broken as well.
Click to expand...
Click to collapse
So what can I do about it
vrahn said:
So what can I do about it
Click to expand...
Click to collapse
Only other thing I know to do is try a couple firmwares and maybe one of the combo files around. If none of that works then a ram with Sammy may be the only option. As this is about everything you can try on your end.
Unless some one else wants to chime in with something I didn't think of.
Ps I had this happen on my LG g3. Camera could not connect. Flash many roms. Flash this that. Nothing. And all because they used apparently the same base I had. I bricked. Or something downloaded a new firmware from a new site and flashed and bam. No camera issue from there on out