Hi,
So I was trying to root my phone and it all went wrong. I have rooted tons of phones before, but never a Samsung (never again).
The phone will show the Samsung Boot screen, but then it either goes black, with a flashing blue LED, or it boots itself into recovery.
When I use ODIN, the flash fails at "system.img.ext4" whenever I use just the AP field. If I load all the fields in, it fails at "xbl.elf"
I got the firmware file from SamMobile, so I don't think that is the issue, but who knows. It's as if the phone no longer has an OS on it. I also tried using SmartSwitch as well, but I have no idea what the S/N on this phone is. It was originally a Sprint phone and was working fine, but I could never find the S/N. It is nowhere on the phone itself, and was not listed when I typed #*06#. All I have is the IMEI.
Finally, when it is in recovery, there is a message at the bottom that reads, "dm-verity verification failed".
Sorry for the bullet point style here, I am on mobile. If anyone can assist, I would be very grateful!
ebercon said:
Hi,
So I was trying to root my phone and it all went wrong. I have rooted tons of phones before, but never a Samsung (never again).
The phone will show the Samsung Boot screen, but then it either goes black, with a flashing blue LED, or it boots itself into recovery.
When I use ODIN, the flash fails at "system.img.ext4" whenever I use just the AP field. If I load all the fields in, it fails at "xbl.elf"
I got the firmware file from SamMobile, so I don't think that is the issue, but who knows. It's as if the phone no longer has an OS on it. I also tried using SmartSwitch as well, but I have no idea what the S/N on this phone is. It was originally a Sprint phone and was working fine, but I could never find the S/N. It is nowhere on the phone itself, and was not listed when I typed #*06#. All I have is the IMEI.
Finally, when it is in recovery, there is a message at the bottom that reads, "dm-verity verification failed".
Sorry for the bullet point style here, I am on mobile. If anyone can assist, I would be very grateful!
Click to expand...
Click to collapse
I'm new to the s7. long time lg man
on lg ussally means either ure trying to flash a non signed image or downgrade a qfused bootloader anti rollback which sprint is good for.
in dl mode after fail its not showing anything about binary and stuff in red is it
TheMadScientist420 said:
I'm new to the s7. long time lg man
on lg ussally means either ure trying to flash a non signed image or downgrade a qfused bootloader anti rollback which sprint is good for.
in dl mode after fail its not showing anything about binary and stuff in red is it
Click to expand...
Click to collapse
It does say something about binary in there. Binary 3 I believe. I'll have to try again to get the error.
ebercon said:
It does say something about binary in there. Binary 3 I believe. I'll have to try again to get the error.
Click to expand...
Click to collapse
sounds the firmware u are flashing is older than what you have on the device hence the fail
try to find newer firmware and try flashing it
download
Download official nougat from sam mobile then flash with Odin. It will definitely solve your problem
amol6630 said:
Download official nougat from sam mobile then flash with Odin. It will definitely solve your problem
Click to expand...
Click to collapse
I may try this as well. I flashed the newest firmware I could find other than Nougat and I now have it booting all the way up and then after about a minute, it loops again. It is at least further along than before.
I just remembered one detail: The original issue began when I flashed a modified boot.img to the phone during a rooting attempt. Could this be what is still causing the issue and preventing a reformatting of the phone from solving the issue? So lost with this thing...
Try with latest firmware + pit file + tick re-partition
ebercon said:
I may try this as well. I flashed the newest firmware I could find other than Nougat and I now have it booting all the way up and then after about a minute, it loops again. It is at least further along than before.
I just remembered one detail: The original issue began when I flashed a modified boot.img to the phone during a rooting attempt. Could this be what is still causing the issue and preventing a reformatting of the phone from solving the issue? So lost with this thing...
Click to expand...
Click to collapse
Sorry to revive this thread but did this work cause its currently happening to me
If your phone is an original, S/N may be engraved in the back... it's a little bit hard to note but put a spotlight near it so that you can identify it better.
hhh ^^
Related
Got a bit of a problem.... I flashed a ROM onto my phone (forgot to back up, that's my big issue) It said it flashed just fine. Went to start up, just ran the lg logo for about 30 mins. Decided to try re-flashing it. Made sure to wipe everything. Nothing, still have the same issue. Tried to get back into CWM, but its gone now. Tried doing emergency download software, now its stuck on the screen "Download is in progress, do not disconnect cable." Im stuck. I dont know what else to do. I've tried the LG Support Tool, but it says to use Verizon Software Upgrade Assistant, which I can't get because I can't find a download for it and I cant get it from my phone.
I have the stock ROM image, but I have no clue how to install it without CWM or something. Any suggestions? Any help would be greatly appreciated! I needs my phone...
iolpiolp8 said:
Got a bit of a problem.... I flashed a ROM onto my phone (forgot to back up, that's my big issue) It said it flashed just fine. Went to start up, just ran the lg logo for about 30 mins. Decided to try re-flashing it. Made sure to wipe everything. Nothing, still have the same issue. Tried to get back into CWM, but its gone now. Tried doing emergency download software, now its stuck on the screen "Download is in progress, do not disconnect cable." Im stuck. I dont know what else to do. I've tried the LG Support Tool, but it says to use Verizon Software Upgrade Assistant, which I can't get because I can't find a download for it and I cant get it from my phone.
I have the stock ROM image, but I have no clue how to install it without CWM or something. Any suggestions? Any help would be greatly appreciated! I needs my phone...
Click to expand...
Click to collapse
they said to use Upgrade Assistant that means you never told them about the truth: phone is not booting....big mistake or let me understand that:Upgrade Assistant works when your phone is in download mode ?!
what is that rom you tried to flash surely was for your phone ?
also you have stock rom this is a .zip file or what format?
can you enter fastboot mode ?
ruscan.calin said:
they said to use Upgrade Assistant that means you never told them about the truth: phone is not booting....big mistake or let me understand that:Upgrade Assistant works when your phone is in download mode ?!
what is that rom you tried to flash surely was for your phone ?
also you have stock rom this is a .zip file or what format?
can you enter fastboot mode ?
Click to expand...
Click to collapse
Um... Let's see... The LG Support Tool which in most cases you can use to return your phone to stock comes up with a message saying "Upgrade tool is preinstalled in your phone. Please allow to install "Verizon Wireless Software Upgrade Assistant" when the phone is being connected to the PC". That's what the tool tells me.
The ROM I tried to flash was BrokenOutConnect v1.0. Its for the LG Connect, which is almost the same phone, and some one said it would be ok to flash it.
The stock ROM is in an .img file, so I need to figure out how to install from that
And I have no idea how to enter fast boot (unless your referring to the vol up+down + pwr, in which case, that doesn't work.
Sorry, can't post the original page for the ROM, I'm too new lol
iolpiolp8 said:
Um... Let's see... The LG Support Tool which in most cases you can use to return your phone to stock comes up with a message saying "Upgrade tool is preinstalled in your phone. Please allow to install "Verizon Wireless Software Upgrade Assistant" when the phone is being connected to the PC". That's what the tool tells me.
The ROM I tried to flash was BrokenOutConnect v1.0. Its for the LG Connect, which is almost the same phone, and some one said it would be ok to flash it.
The stock ROM is in an .img file, so I need to figure out how to install from that
And I have no idea how to enter fast boot (unless your referring to the vol up+down + pwr, in which case, that doesn't work.
Sorry, can't post the original page for the ROM, I'm too new lol
Click to expand...
Click to collapse
ok
I think was a bad idea to flash that rom because is not exactly made for your phone one can damage a phone in this way never do like that !
about your stock rom...maybe this is a backup made by stock recovery ? do you have a recovery.img file in that update ? there is a single img file in that stock rom or more files ?
ruscan.calin said:
ok
I think was a bad idea to flash that rom because is not exactly made for your phone one can damage a phone in this way never do like that !
about your stock rom...maybe this is a backup made by stock recovery ? do you have a recovery.img file in that update ?
Click to expand...
Click to collapse
No I do not... I actually just found that stock image on another forum. File is called LG_Lucid_VS840_4g_system.img . I realize that was a horrible idea... Google kinda led me astray on that one lol. I just wanna figure out how to return it to stock. Or if anyone has a link for "Verizon Wireless Software Upgrade Assistant", that would be much appreciated.
iolpiolp8 said:
No I do not... I actually just found that stock image on another forum. File is called LG_Lucid_VS840_4g_system.img . I realize that was a horrible idea... Google kinda led me astray on that one lol. I just wanna figure out how to return it to stock. Or if anyone has a link for "Verizon Wireless Software Upgrade Assistant", that would be much appreciated.
Click to expand...
Click to collapse
but do you have a backup of your current rom on your sdcard ? It's made by stock recovery if so search for a file named recovery.img
here is the link to your phone check if this is really your phone also download usb drivers and software to update it from LG site
install USB drivers then download and run LG Mobile Support Tool this will connect to LG site download files and finally will request to connect phone to PC then will make update
ruscan.calin said:
but do you have a backup of your current rom on your sdcard ? It's made by stock recovery
to your phone check if this is really your phone also download usb drivers and software to update it from LG site
Click to expand...
Click to collapse
I think I got it working.... We will see in just a minute. Thank you for your help though
SUCCESS!!!!!!!!!!!!! After much trouble, it is finally recovered. Long story short, just had to update using a special tool. Thanks again for your help
iolpiolp8 said:
SUCCESS!!!!!!!!!!!!! After much trouble, it is finally recovered. Long story short, just had to update using a special tool. Thanks again for your help
Click to expand...
Click to collapse
What was the tool?
My vs840 won't allow me to flash a recovery how did you do it?
Would anybody be able to provide any insight on how i could fix my s3 that appears to be stuck on boot? i received my warranty fixed device from samsung today and upon rerooting it, i forgot to unlock the bootloader i then went to the "Verizon has detected unauthorized software" screen. After which, I followed this thread http://forum.xda-developers.com/showthread.php?t=1840030 hoping to get back to stock. But after following these directions, the phone boots to a Samsung custom (Unlocked) screen and then it goes to the galaxy s3 boot screen and remains there, if anybody could provide any assistance, that would be awesome. I'd just hate to get laughed at if i bring it into a verizon store. thanks and happy holidays.
Boot into recovery and do a factory reset.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Boot into recovery and do a factory reset.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
I've tried that a few times already. No luck thus far
ImBarone said:
Would anybody be able to provide any insight on how i could fix my s3 that appears to be stuck on boot? i received my warranty fixed device from samsung today and upon rerooting it, i forgot to unlock the bootloader i then went to the "Verizon has detected unauthorized software" screen. After which, I followed this thread http://forum.xda-developers.com/showthread.php?t=1840030 hoping to get back to stock. But after following these directions, the phone boots to a Samsung custom (Unlocked) screen and then it goes to the galaxy s3 boot screen and remains there, if anybody could provide any assistance, that would be awesome. I'd just hate to get laughed at if i bring it into a verizon store. thanks and happy holidays.
Click to expand...
Click to collapse
What baseband are you on ?
jlyle said:
What baseband are you on ?
Click to expand...
Click to collapse
i was on vrbmf1 when i got it back but ive been trying to flash back to the stock to hopefully get out of the "unauthorized software" screen. when i tried to wipe system and data and then restart from the stock recovery menu, i got an error message saying that the directory /system didnt exist, yet ive tried flashing back to stock twice and both processes finished through odin
ImBarone said:
i was on vrbmf1 when i got it back but ive been trying to flash back to the stock to hopefully get out of the "unauthorized software" screen. when i tried to wipe system and data and then restart from the stock recovery menu, i got an error message saying that the directory /system didnt exist, yet ive tried flashing back to stock twice and both processes finished through odin
Click to expand...
Click to collapse
Are you 100% sure you was on MF1 and Verizon did not ship it to you with 4.3.
If you was on MF1 Odin should flash fine and resolve any issues. If you was on 4.3 than you have issues if you ran Odin
jlyle said:
Are you 100% sure you was on MF1 and Verizon did not ship it to you with 4.3.
If you was on MF1 Odin should flash fine and resolve any issues. If you was on 4.3 than you have issues if you ran Odin
Click to expand...
Click to collapse
1000% sure that it was 4.1.2 and MF1 because it was trying to push an OTA update that i kept canceling. should i attempt reflashing through odin again? and if so could you link me to something specifically i should flash and possibly some instructions because ive been without a phone for 2 weeks and wouldnt like to wait til october for another one....
thanks
ImBarone said:
Would anybody be able to provide any insight on how i could fix my s3 that appears to be stuck on boot? i received my warranty fixed device from samsung today and upon rerooting it, i forgot to unlock the bootloader i then went to the "Verizon has detected unauthorized software" screen. After which, I followed this thread http://forum.xda-developers.com/showthread.php?t=1840030 hoping to get back to stock. But after following these directions, the phone boots to a Samsung custom (Unlocked) screen and then it goes to the galaxy s3 boot screen and remains there, if anybody could provide any assistance, that would be awesome. I'd just hate to get laughed at if i bring it into a verizon store. thanks and happy holidays.
Click to expand...
Click to collapse
If it was fixed or replaced by Samsung they usually update to newest software before returning it. If it was on 4.3 and you tried to unlock it is now bricked beyond our ability to repair at this time.Can't unlock, flash custom recovery or downgrade to 4.1.2 or lower or it will brick. If was on 4.1.2 just need to Odin stock tar.If it hangs then a Factory reset in stock recovery will usually fix it. Need more info on what build you were actually on when started.
prdog1 said:
If it was fixed or replaced by Samsung they usually update to newest software before returning it. If it was on 4.3 and you tried to unlock it is now bricked beyond our ability to repair at this time.Can't unlock, flash custom recovery or downgrade to 4.1.2 or lower or it will brick. If was on 4.1.2 just need to Odin stock tar.If it hangs then a Factory reset in stock recovery will usually fix it. Need more info on what build you were actually on when started.
Click to expand...
Click to collapse
im completely sure it was NOT 4.3 though. it flashed fine when i ran this http://forum.xda-developers.com/showthread.php?t=2046439 i just forgot to flash the bootloader unlock through recovery so then i tried reflashing stock and now im here. and where could you point me in the direction of a stock tar and some instructions because ive been using the ones on the original thread i linked with no luck
Remove .tar from zip and flash in Odin. If was on MF! it should fix with no more than a factory reset in stock recovery. Then run Beans casual to reroot and unlock.
http://www.androidfilehost.com/?fid=23134718111254196
http://forum.xda-developers.com/showthread.php?t=2332825
prdog1 said:
Remove .tar from zip and flash in Odin. If was on MF! it should fix with no more than a factory reset in stock recovery. Then run Beans casual to reroot and unlock.
http://www.androidfilehost.com/user/settings-dev-files.php?action=show-files&flid=7111#
http://forum.xda-developers.com/showthread.php?t=2332825
Click to expand...
Click to collapse
the androidfilehost link is giving me this
"Access Denied
Sorry!
It looks like you don't have permission to access that folder. Make sure the url you are trying to access is correct.
http://forum.xda-developers.com/showthread.php?p=48799846
If you feel this is in error, please contact us."
Do you get a "PASS" when you run Odin ?. Run the tar from PR and all should be good (Iv ran it many times HA)
ImBarone said:
the androidfilehost link is giving me this
"Access Denied
Sorry!
It looks like you don't have permission to access that folder. Make sure the url you are trying to access is correct.
http://forum.xda-developers.com/showthread.php?p=48799846
If you feel this is in error, please contact us."
Click to expand...
Click to collapse
Try again with this link.
http://www.androidfilehost.com/?fid=23134718111254196
jlyle said:
Do you get a "PASS" when you run Odin ?. Run the tar from PR and all should be good (Iv ran it many times HA)
Click to expand...
Click to collapse
im currently flashing the root66.tar through odin hopefully my problem will be solved afterwards
jlyle said:
Do you get a "PASS" when you run Odin ?. Run the tar from PR and all should be good (Iv ran it many times HA)
Click to expand...
Click to collapse
ok so i no luck with the root66.tar file im going to try the other one now. should i be checking the nand erase all box?
ImBarone said:
ok so i no luck with the root66.tar file im going to try the other one now. should i be checking the nand erase all box?
Click to expand...
Click to collapse
Leave everything in odin as is..dont check or uncheck anything
Make sure u put in PDA
Make sure you have a solid connection with cable .. that will cause issues too
Your in download mode right ? HA / just checking
ImBarone said:
Would anybody be able to provide any insight on how i could fix my s3 that appears to be stuck on boot? i received my warranty fixed device from samsung today and upon rerooting it, i forgot to unlock the bootloader i then went to the "Verizon has detected unauthorized software" screen. After which, I followed this thread http://forum.xda-developers.com/showthread.php?t=1840030 hoping to get back to stock. But after following these directions, the phone boots to a Samsung custom (Unlocked) screen and then it goes to the galaxy s3 boot screen and remains there, if anybody could provide any assistance, that would be awesome. I'd just hate to get laughed at if i bring it into a verizon store. thanks and happy holidays.
Click to expand...
Click to collapse
Boot into download mode and on the screen where the option to continue or restart phone, choose to restart your phone. This worked for me just this morning, for some reason it bypasses the check.
Sent from my SCH-I535 using XDA Premium 4 mobile app
jlyle said:
Leave everything in odin as is..dont check or uncheck anything
Make sure u put in PDA
Make sure you have a solid connection with cable .. that will cause issues too
Click to expand...
Click to collapse
im trying with the stock MF1 file now. left everything checked normally as it always is in odin lets see how this goes. would it be common for a boot to hang on the "Samsung Galaxy s3" screen coming off of odin?
ImBarone said:
im trying with the stock MF1 file now. left everything checked normally as it always is in odin lets see how this goes. would it be common for a boot to hang on the "Samsung Galaxy s3" screen coming off of odin?
Click to expand...
Click to collapse
Odin will reboot your phone.. are you getting Pass in Odin ??
ImBarone said:
im trying with the stock MF1 file now. left everything checked normally as it always is in odin lets see how this goes. would it be common for a boot to hang on the "Samsung Galaxy s3" screen coming off of odin?
Click to expand...
Click to collapse
Yes. It is common for it to reboot but bootloop. Pull battery and then boot into stock recovery and factory reset. Then it should boot.
Can anyone help? I spent a big chunk of my hard earned money on a refurbed S6 for my daughter, she's had it about a week (she's Pokemon mad btw). The latest update for Pokemon Go came out and now she's blocked from the game as it appears the phone has been rooted. If I'd known, I wouldn't have bought it. Anyway, for the last 2 days my partner and I have been trying to unroot it. We've used various versions of Odin to no avail. I had a lot of trouble finding the right firmware because it looks like the phone was Polish according to the version and CSC numbers, and tbh I'm still not sure if we're trying the right one. Software is 5.1.1. right now. I've tried installing SuperSU but it won't run, it just crashes the phone and forces a reboot. We've tried manually unrooting with a file manager but the su files we need to delete reappear seconds after they're deleted. I'm at the end of my tether, does anyone have any ideas?
You won't be able to unroot it until you flash stock firmware. I don't know if the game checks the knox status.
Give this a go
http://www.androidpolice.com/2016/09/11/guide-play-pokemon-go-0-37-rooted-android-magisk/
Enjoy
Unforunately my partner spent almost all night trying to flash the firmware. According to him it 'nearly' worked, however, I now have a phone stuck in a boot loop. :crying:
Run emergency recovery on Smart switch
ccalixtro said:
Run emergency recovery on Smart switch
Click to expand...
Click to collapse
Do I need to have smart switch installed on the phone for this to work?
amber_1978 said:
Do I need to have smart switch installed on the phone for this to work?
Click to expand...
Click to collapse
No, run it on your pc.
Thanks, I'll give it a go after work.
ccalixtro said:
No, run it on your pc.
Click to expand...
Click to collapse
Smart switch won't work, says it doesn't recognise the device
I think I would give original firmware of your country and odin a try. One of possible ways is to download all needed files from the site of sammobile.
For me this way works every time when I stuck in boot loop. Odin functionates when you are in download mode. Switch off your s6, then start by pressing home-, powerbutton and Volume down at the same time.
Then start Odin on PC, then connect USB and so on.
Greetz JG
amber_1978 said:
Smart switch won't work, says it doesn't recognise the device
Click to expand...
Click to collapse
When you select emergency recovery theres an option where you have to write the device model and the serial number
Use kies 3 on your computer. When you get it do a "firmware upgrade and installation" it will ask for your serial number which you can get from download mode when pressing the home key. After that kies 3 will ask to boot your phone to recovery but instead boot to download and bow your phone will flash to stock. This method always work!!
fahad999 said:
Use kies 3 on your computer. When you get it do a "firmware upgrade and installation" it will ask for your serial number which you can get from download mode when pressing the home key. After that kies 3 will ask to boot your phone to recovery but instead boot to download and bow your phone will flash to stock. This method always work!!
Click to expand...
Click to collapse
Thanks for the reply. Unfortunately I've tried Kies already and I can't get it to work at all. I get a message telling me my device is not compatible and the whole thing just stops. I'll give it another go though, no harm in trying. Thanks
@amber_1978, Pokemon Go does not check for root. The only thing it does seem to check for is location spoofing via another app. I'm using it on a rooted, Knox tripped, Xposed installed phone with no issues.
If you want to return the phone back to stock, the best way IMO would be to use Odin to flash a stock image, such as the EPD1 firmware.
socal87 said:
@amber_1978, Pokemon Go does not check for root. The only thing it does seem to check for is location spoofing via another app. I'm using it on a rooted, Knox tripped, Xposed installed phone with no issues.
If you want to return the phone back to stock, the best way IMO would be to use Odin to flash a stock image, such as the EPD1 firmware.
Click to expand...
Click to collapse
Really? Did you do the latest update in the game and it still worked ok? This phone has definitley not been used for location spoofing by us and I'm pretty sure there were no apps of that nature on the phone. I downloaded a root checker when everything went wrong the other day, it said the phone was rooted. I'm totally at a loss tbh. Right now it's still in a boot loop. Trying to flash it with Odin as we speak.
Just an update. Tried Smart Switch. Tried the model and serial numbers on the back of the phone case, these weren't recognised so I went to the recovery screen and hit the home button and got a completely different set of numbers. Different IMEI, model number, you name it. I'm assuming this is why Odin won't work, I'm looking for the wrong firmware? I obviously have Frankenstein's phone. No idea what to do now.
Best thing to do is to flash TWRPP and try to flash a custom stock rom through the TWRP recovery which does not have root installed..... If that doesn't work try to find a generic stock firmware for Odin, meaning a firmware that can run in any country..... If all else fails update it to 6.0.1 stock firmware. Try the closest firmwares to your location.
And if you do manage to get to the Samsung logo let the phone sit there for a good 10 minutes even if it reboots....
When I bricked my Samsung I used masiks custom 6.0.1 rom based on stock, but had all the links to bootloaders cscs radios and what not so giv that a shot if you can find it.
---------- Post added at 12:08 AM ---------- Previous post was at 12:05 AM ----------
Link to rom that helped me http://forum.xda-developers.com/galaxy-s6/development/masik-marshmallow-1-0-jan-20-2016-t3297961
do you have lucky patcher playstore installed ?
Ok, here goes.
Have a SM-G930W8 (Canada, Rogers, S7). Was running a 7.0 ROM from XDA (ambassadii? sp?). I disabled developer options to check a possible issue transferring files from my PC to the S7's SD Card. I restarted the device.
Custom binary blocked by FRP lock. No problem, thought I. I'll boot into Download Mode, fire up Odin and flash the stock rom back to the device (also what I've read in most every thread I've come across). Launch ODIN as admin, see the device is connected, select the proper AP(also BL, CSC and CP...I'm thorough) file to flash (from Sammobile I think it was), make sure repartition is unchecked and hit Start.
Here's the result...wait I can't post them but I have the screen shots! The phone shows Secure Check Fail (PIT). Odin gives an error at that step as well.
I've tried Kies (there's no SN anywhere on my device or on the box) so that doesn't work. Smart Switch, same issue.
Does ANYONE out there have any clue what I can attempt next? Sending it in for service will likely cost as much as a new device, with the warranty void. Thank you very much in advance.
chewtoy0 said:
Ok, here goes.
Have a SM-G930W8 (Canada, Rogers, S7). Was running a 7.0 ROM from XDA (ambassadii? sp?). I disabled developer options to check a possible issue transferring files from my PC to the S7's SD Card. I restarted the device.
Custom binary blocked by FRP lock. No problem, thought I. I'll boot into Download Mode, fire up Odin and flash the stock rom back to the device (also what I've read in most every thread I've come across). Launch ODIN as admin, see the device is connected, select the proper AP(also BL, CSC and CP...I'm thorough) file to flash (from Sammobile I think it was), make sure repartition is unchecked and hit Start.
Here's the result...wait I can't post them but I have the screen shots! The phone shows Secure Check Fail (PIT). Odin gives an error at that step as well.
I've tried Kies (there's no SN anywhere on my device or on the box) so that doesn't work. Smart Switch, same issue.
Does ANYONE out there have any clue what I can attempt next? Sending it in for service will likely cost as much as a new device, with the warranty void. Thank you very much in advance.
Click to expand...
Click to collapse
Are you able to boot into recovery?
If not you could try to ONLY flash the stock recovery>boot recovery>wipe everything then boot to download mode and flash complete stock firmware via odin.
or flash stock firmware with the same CSC as your custom rom has/ flash "HOME_CSC" instead of "CSC..."
good luck
mrd0pe said:
Are you able to boot into recovery?
If not you could try to ONLY flash the stock recovery>boot recovery>wipe everything then boot to download mode and flash complete stock firmware via odin.
or flash stock firmware with the same CSC as your custom rom has/ flash "HOME_CSC" instead of "CSC..."
good luck
Click to expand...
Click to collapse
Can't get into Recovery no. Which file of the lot has the stock recovery in it?
chewtoy0 said:
Can't get into Recovery no. Which file of the lot has the stock recovery in it?
Click to expand...
Click to collapse
Try to only flash AP, I did have the same problem as you describe but I cant remember how I resolved it, I'm on G930F tho
Your S/N is on the rear of the phone it can be a pain to see but it is there. Use smart switch to restore the firmware. Just click emergency firmware restore.
It is? The IMEI is there but I didn't see the SN. Also my phone is black so that doesn't help.
I will have another look.
mrd0pe said:
Try to only flash AP, I did have the same problem as you describe but I cant remember how I resolved it, I'm on G930F tho
Click to expand...
Click to collapse
I did that. No dice.
I had the same issue as you. Used the same rom and disabled developer options. I downloaded stock firmware.. flashed it with odin. It actually took 2 tries. The first time I could see only 1/4 of the screen. The second time i flashed stock firmware from another country and it worked. You might actually have to do a hard factory reset if you cant unlock your phone.. for some reason. Then I let kies do its magic because I could then see my S/N. Right now I still feel my phone slightly different. Messenger is unstable for some reason also.
Ok.
Checked the back of the device for a SN#. Mine's black so I used a flashlight. It's not there. The Model #, IMEI, FCC ID# and IC# are all there. Does someone have a blurred out screeny of where THEY found their SN# on the back of the device?
Tried flashing with Odin the CSC(home) and AP files (stock MM from my region). Got: Custom Binary (Boot) blocked by FRP Lock.
Tried flashing TWRP again, to TRY to enter into recovery...same message.
With just the AP selected, ODIN seems to hang at "Get PIT for mapping" and fails. I'm running it again to make sure it's not a bad connection with the device.
Same result, hangs at "Get PIT for mapping".
chewtoy0 said:
Ok.
Checked the back of the device for a SN#. Mine's black so I used a flashlight. It's not there. The Model #, IMEI, FCC ID# and IC# are all there. Does someone have a blurred out screeny of where THEY found their SN# on the back of the device?
Tried flashing with Odin the CSC(home) and AP files (stock MM from my region). Got: Custom Binary (Boot) blocked by FRP Lock.
Tried flashing TWRP again, to TRY to enter into recovery...same message.
With just the AP selected, ODIN seems to hang at "Get PIT for mapping" and fails. I'm running it again to make sure it's not a bad connection with the device.
Same result, hangs at "Get PIT for mapping".
Click to expand...
Click to collapse
Try to flash Nougat firmware, as that was what your custom rom was on right? I dont think it really matters though as I downgraded from stock 7.0 to stock 6.0.1 via odin without errors... But you can try
As an absolute last resort I would try to check the "re-partition"-tab and provide odin with a .pit file, then load everything (BL, AP, CP...) with stock firmware <<<< do this at your own risk, if you are not careful, your phone will be bricked
I am trying to flash MM back to it .
I'm not sure I want to mess with the re partition table...But it's already soft bricked.
Mine is also black. The S/N Is immediately next to the imei number I had to use a flash light to see it but it's deffinatly there.
Matty39856 said:
Mine is also black. The S/N Is immediately next to the imei number I had to use a flash light to see it but it's deffinatly there.
Click to expand...
Click to collapse
I'd show you a photo if I could. The IMEI is by itself on a third line of stuff. There's nothing else around it.
chewtoy0 said:
I'd show you a photo if I could. The IMEI is by itself on a third line of stuff. There's nothing else around it.
Click to expand...
Click to collapse
I'm not sure then. Have you tried flashing the latest unlocked version for your region? I remember on my s6 I had a similar problem that was caused because I was trying to flash a lower version of Android than what I previously had. So ended up flashing the latest unlocked version BTU for my region and it worked. Sorry I can't be of more help. It looks like the latest firmware is still 6.0.1 that's why it's blocking it from downgrading.
Was sent a PM by a person. Was skeptical at first, but in 10 minutes using TeamViewer, they fixed the issue by reflashing the device (as well as repartitioning it properly). I can't thank them enough.
This is the person on Facebook...
Unlock Network FRP Lock Remote Service
Good day everyone. I am totally new to this and on here but hope is something I came with and will always be a part of my beliefs.. I did flash my Samsung S7 SM-G930F a couple of times with different kind of custom ROMS and I guess I upgraded the bootloader by doing so... So now I was in TWRP mode and without thinking, I started to change the DATA format and immediately switched it off when I realized what exactly I'm doing and now it's stuck. It can switch on only with a charger and by force but I am capable of getting into download mode. I am trying to flash a stock ROM but it keeps on failing cause of the bootloader. When I use the PIT file, it shows successful though. But nothing more happens. Any help would be appreciated. Thank you in advance.
Andre369 said:
Good day everyone. I am totally new to this and on here but hope is something I came with and will always be a part of my beliefs.. I did flash my Samsung S7 SM-G930F a couple of times with different kind of custom ROMS and I guess I upgraded the bootloader by doing so... So now I was in TWRP mode and without thinking, I started to change the DATA format and immediately switched it off when I realized what exactly I'm doing and now it's stuck. It can switch on only with a charger and by force but I am capable of getting into download mode. I am trying to flash a stock ROM but it keeps on failing cause of the bootloader. When I use the PIT file, it shows successful though. But nothing more happens. Any help would be appreciated. Thank you in advance.
Click to expand...
Click to collapse
I don't own an S7 so maybe not much help.
From screen shot above try using Odin version 3.13.1 or higher.
Can you post a screen shot of download mode and Odin when it fails
If you can still get into download mode there should be a line saying AP SWREV: B:? K:? S:? or something similar.
The B:? is your bootloader version number. You will need to flash firmware with this number or higher.
spawnlives said:
I don't own an S7 so maybe not much help.
From screen shot above try using Odin version 3.13.1 or higher.
Can you post a screen shot of download mode and Odin when it fails
If you can still get into download mode there should be a line saying AP SWREV: B:? K:? S:? or something similar.
The B:? is your bootloader version number. You will need to flash firmware with this number or higher.
Click to expand...
Click to collapse
Thank you for the response I managed to get it fixed. I used odin 3.14 instead and I wiped it with the NAND option and started from scratch. I used the pit file and flushed the bootloader first with repartition, then did the AP separete, and thats how I went on. After all, I'm back again. Thank you for trying, much appreciated.