[Completed] Guys please help with my generic tablet - XDA Assist

HELP I ave this tablet which got bricked and stop working >>i did mtkdroid tool backup before the brick ...i flashed it using sp flash tools which was ok it flashed peferct upon the hold of power on it says decrypt fail,boot error it doesnt not go into recovery mode again

Padyt007 said:
HELP I ave this tablet which got bricked and stop working >>i did mtkdroid tool backup before the brick ...i flashed it using sp flash tools which was ok it flashed peferct upon the hold of power on it says decrypt fail,boot error it doesnt not go into recovery mode again
Click to expand...
Click to collapse
Sounds like it's bricked.
You should post your question in the [HELP THREAD] Ask ANY Question. Noob Friendly. thread, or in the General discussion > Questions and Answers forum.

Thread closed and thank you !

Related

[Completed] bricked

hello im in a hurry if i dont fix my phone in 1,30 minutes im my dad is gonna kill me rip
so i tryed installing cwm via original android recovery using the apply update via sdcard it didnt install it it still remained the orginal one
then i installed twrp recovery via odin and first time 1 i couldnt get in recovery mode it had a exclamation point at the top of the screen with the boot logo so i bricked it but then
i removed trhe battery put in back in and boot up it worked i downloaded rom manager and used the boot in recovery mode option then it still had the boot logo, exclamation point but then i also removed the battery and tryed booting it up this time it didnt work it just stuck samsung kies wont notice it unless i use download mode but it says unsupported device now im downloading a rom i think its stock im using an core 2 g355hn and im downloading a stock rom for core 2 duos g355h idk if it will work can you help me get pass the boot logo and exclamation point without doing this ****
vipsy6 said:
I think priority is your phone should be in a working condition. So to flash a stock ROM is the best option. But make sure you flash the correct one. Otherwise you will brick it. If you are not sure with the ROM you are downloading or already downloaded than visit sammobile.com here will get the correct one. Just flash it through Odin in a flash mode.
Click to expand...
Click to collapse
finnally a reply i actually did that but theres some kind of error
thanks to xda i cant post a screen shot i will try this
ht tp: // imgur. com /2 I4xW Ue
just remove spaces
Hi,
You have a dedicated forum for that device, so you must start ask/read there for more relevant answers:
http://forum.xda-developers.com/galaxy-core/help
Good luck
R_a_z_v_a_n said:
Hi,
You have a dedicated forum for that device, so you must start ask/read there for more relevant answers:
> Samsung Galaxy Grand 2 > Galaxy Grand 2 Q&A, Help & Troubleshooting
or here:
[HELP THREAD][NOOB FRIENDLY] Ask Any Questions
Good luck
Click to expand...
Click to collapse
ok and i dont use grand 2 i use core 2
kdik32 said:
ok and i dont use grand 2 i use core 2
Click to expand...
Click to collapse
Sorry, wrong copy/paste.
Edited previous post. See the link above.
Thread closed and completed. Thank you.

[Completed] Help 111 i brick my prestigio 5300.cant install drivers

Bricked PAP5300DUO
tHE PHONE IS VIBRATING. i CAN ENTER IN RECOVERY MODE.. The PC make a sound but the fastboot,Odin & other programs cant see my phone. i INSTALLED ALL KIND OF DRIVERS BUT .... i USED PIMP MY ROM BUT I MADE A MISTAKE TO USE OTHER SIMILAR APP AFTER THAT AND AFTER REBOOT DIED. I WIPE THE CHECHE & TRIED FACTORY RESET BUT AT THE END FAILS AND SAYS ...DATA/APP IS MISSING. i TRIED RESTORE TITANIUM BACKUP FILE BUT DOESNT HELPED. PLEASE HELP !!!
I USED THE SUGGESTED METHOD BUT IT SAYS <WAITING FOR DEVICE>
THE LAST I MADE BACKUP/RECOVERY WITH MY OLD BACKUP BUT STILL NOTHING. I KNOW NOW I MUST DO SOMETHING FROM PC BUT DRIVERS ARE PROBLEM.
PLEASE try to help me. Im new to all this ****.
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Can you walk me through on how to install CWM from ODIN to my Galaxy Young?

Hello, I'm a newbie on this android thing.
I tried to install CM 7.2 on my Galaxy Young but it turned out to be a very bad rom; Wi-Fi and camera didn't work. I finally found a good room, (or at least I think it's good) in this forum: http://forum.xda-developers.com/galaxy-y/development/rom-t2866838 but now my recovery won't work. It gets stucked and the phone restarts. I try to install a new recovery from ODIN, since the original recovery won't start and the process fails, I don't know if I'm downloading the wrong recovery or I just bricked the phone.
So, please, would you guys tell me if anything can be done? or how do I install a new recovery so I can get the rom working
Thanks in advance! Have a good night.
XDA Visitor said:
Hello, I'm a newbie on this android thing.
I tried to install CM 7.2 on my Galaxy Young but it turned out to be a very bad rom; Wi-Fi and camera didn't work. I finally found a good room, (or at least I think it's good) in this forum: http://forum.xda-developers.com/galaxy-y/development/rom-t2866838 but now my recovery won't work. It gets stucked and the phone restarts. I try to install a new recovery from ODIN, since the original recovery won't start and the process fails, I don't know if I'm downloading the wrong recovery or I just bricked the phone.
So, please, would you guys tell me if anything can be done? or how do I install a new recovery so I can get the rom working
Thanks in advance! Have a good night.
Click to expand...
Click to collapse
Hello, and welcome to XDA Assist! You need to make sure you have the right recovery for your device, and then just flash it in fastboot mode. If you have any more difficulties, please register and ask your questions here: Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubleshooting.
Good luck!

[Completed] Bootloop using wrong recovery...

I rooted my device Huawei g730-u10 month ago..
SO as every one do i just searched little and then tried to installed a similar recovery image using uncle tool. After that my phone turn off and held on boot loop .
So i can not even open recovery mode now. Just huawei logo appears and it restarts again and again..
i donot know what to do now. How to get back this bricked phone.
Plz help me its my first post and confident too......
david4416 said:
I rooted my device Huawei g730-u10 month ago..
SO as every one do i just searched little and then tried to installed a similar recovery image using uncle tool. After that my phone turn off and held on boot loop .
So i can not even open recovery mode now. Just huawei logo appears and it restarts again and again..
i donot know what to do now. How to get back this bricked phone.
Plz help me its my first post and confident too......
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally i couldn't find the device forum for your mentioned one so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Good luck!

[Completed] Lenovo Tablet S6000L

Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and canĀ“t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck

Categories

Resources