Database Info

Razr HD bootloader screen in bootloader screen after install OTA KitKat

Hello, I need urgent help
My Razr HD stay on screen after updating to fastboot KitKat.
*
Brazil was in retail 9.8.2Q Jelly Bean-50-XT925_VQLM-26_Retail_BR_SIGNED_S12_USAVANQURETBRLA022.0R_S1FF_CFC_fb.xml
*
I downloaded the OTA update and leave when I finish stay in fastboot screen with the following:
AP Fastboot Flash Mode (S)
10.98 (*) / sha-07671a2, 29.07.2014 10:41:50)
eMMC Info: Size 16gb
*
Device is Locked. Status Code: 0
*
Battery OK
*
Connect USB
Data Cable
downgrade security version
update gpt_main version failed
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot Reason: Invalid GPT
Now I had the bootloader unlocked and had already changed several firmware without problem, even down to jelly bean kitkat smoothly through fastboot.
*
I tried fastboot and RSD lite by several firmware brazil's already had, france, etc and nothing gives me errors so as RSD lite fastboot.
*
I do not understand is that I get locked bootloader if it was just installed OTA retail Brazil.
*
The battery at this time should be 50%.
Excuse my English translator, but I'm looking for help.

The same with me! I found on forums that we need to flash the same or newer than OTA update software via RSD Lite. But where find those versions? Can someone help us ? Thanks!

edu4hd0 said:
The same with me! I found on forums that we need to flash the same or newer than OTA update software via RSD Lite. But where find those versions? Can someone help us ? Thanks!
Click to expand...
Click to collapse
Yes, unfortunately the SBF file has not come yet.
if someone could help. For my part I kept it to not drain the battery and also wait out the SBF

you can flash jelly bean from your original carrier , and see how that works for you. why didnt you unlock your bootloader? that should be on your list of to do man
http://sbf.droid-developers.org/phone.php?device=6

Thanks for your answer. Unfortunately unlock the bootloader is not an option as we did try but can not retrieve the infromacion.
I have tried several versions of JB but I have not been able to work, so Fastboot as RSD lite

FYI :unlocking bootloader can be done via Motorola website

as a friend? if I come and ask me the numbers obtained through fastboot and explain in my previous post that I can not get those numbers
and look at my email and found the key to unlock but I can not access the command window to enter it. I think something about the bootloader that does not let me do any of these operations

I have hbenz2008, CWGSM3VO and kabaldan to thank for getting my phone out of this problem...
http://forum.xda-developers.com/droid-razr-hd/help/xt925-fastboot-reaoninvalid-gpt-flash-t2949748 (files to download are on post 15)
http://forum.xda-developers.com/showthread.php?p=57251614#post57251614
Essentially, you just need to flash the KitKat partition/gpt image and the tz image before everything. Those were the only two files it allowed me to flash. Reboot into fastboot just to make sure your phone goes back to unlocked. Then RSD-Lite can do the rest (remember to remove the partition and tz lines from a pre-KitKat firmware's XML file).

[Q] Moto G 4G xt1039 recovery and root problems

I unlocked my new Moto G 4g xt 1039 (Android 4.4) without problems, but i cannot get it to accept any recovery i try to install. I tried manual adb with CWM and TWRP. I also tried the Moto Tool AIO and Easy Recovery.
All of them failed to flash the recovery except once when the recovery was flashed, but after booting it, it did not react to keypresses and touch.
I'm on Windows 64bit nad flashing every other device i have and had wasn't a problem.
Does anyone have an idea. Every thread regarding the device was more or less outdated so help would be appreciated. I like my devices rooted.

Just a short update and push ? Chainfire root worked. Still no success with recovery though.

ppzoid said:
Just a short update and push ? Chainfire root worked. Still no success with recovery though.
Click to expand...
Click to collapse
Are you using a recovery built for peregrine?
Try one of the TWRP versions by @Somcom3X found here:
http://forum.xda-developers.com/mot...ection-somcom3xs-experimental-corner-t2996266

Yes, i've also tried to flash one of @Somcom3X recoveries, too.
The problem seems to be one of my previous attempts to flash a recovery, because i get two messages on the phone in fastboot mode when trying to flash a recovery:
cmd : getvarartition-type:recovery
cmd : getvaar:max-download-size
I'm pretty sure there should be at least two more lines after that, when sucessfully flashing. To me it seems as if the recovery partition seems to be broken. Any idea how to fix it. If iit is the problem at all.
I already tried reinstalling the stock recovery with Moto Tool AIO. Iget the following ooutput on the phone:
cmd : getvarartition-type:recovery
cmd : getvaar:max-download-size
cmd : download:00a00000
cmd : flash:recovery
bab check failed for recovery

Have you tried booting the image? Fastboot boot xxx.img
Sent from my XT1045

I tried now. the upper third of the screen is white and the two lower thirds are blue for a moment and fade to black with backlight on.
Update: For reasons beyond my knowledge it works. I cannot get it to boot to recovery from the fastboot menu, but it works with adb command boot recoveryxxx.img and from within advanced boot menu.

Friends, made ​​unlocking the bootloader and used the kingo root and the procedure was successful
XT1039
Android 4.4.4

Moto G Bootloader Loop

Hello gang.
I appears this dyslexic numpty has creamed his phone somehow - It's in Soft Brick mode and isn't playing with me any more.
It's a 1st Gen Tesco 8GB, I updated it to GPE and lollipop. But I couldn't get a new sim card working so I flashed Cygo CustomRom with it and now I'm stuck in a bootloop.
I honestly don't know where to start or where to begin, i've followed some tutorials to no avail and I'm wondering if someone would be so kind as to help a fool out. I've tried this http://forum.xda-developers.com/showthread.php?t=2542219 - But I get errors.
Any help would be appreciated.

What errors do you get ? Try relfash the GPe firmware to your device. If you flash the Moto firmware your phone will be bricked from what I know if you have the GPe firmware.

Eurofighter_ty said:
What errors do you get ? Try relfash the GPe firmware to your device. If you flash the Moto firmware your phone will be bricked from what I know if you have the GPe firmware.
Click to expand...
Click to collapse
Keep on getting Mismatched Partition Size.
Then when I finish and reboot it just stays on the bootloader unlocked screen.

Try this:
http://android.clients.google.com/p...incremental-KTU84P.M003_18-LRX21Z.M002_15.zip
Download it and then sideload it with ADB to recovery.
Make sure you have the fastboot drivers installed and adb installed and then write the folowing command
adb sideload
after "sideload" you type the location of the zip file and enter !

PC wont recognize my Bricked Moto G

Help I conveted my phone to GPE to install the MIUI rom made by wmaster, but while installing I got 2 errors one from failing at flashing boot and another from failing flashing recovery, now when it try to boot the system it says failed to validate boot image or when trying to boot at recovery it says failed to validate recovery image and my Pc dont recognize my phone via adb
< waiting for device >
:/ so i cant flash anything from adb any help? And sorry for my bad english

Boot to bootloader and flash stock firmware.
Sent from my XT1031

Moto G 2015 device locked, boot loop, no access into recovery

hello
i've bought used moto g 2015 from spain.
the problem is that the device is locked with status code 0.
i've been trying to unlock it, but with no luck.
everything gives the error failed(remote failure)
recently i've used windroid toolkit to unlock bootloader and install twrp like in some tutorials, the app says it's done, but after i enter a recovery the phone hangs and boots again to fastboot.
any help will be appreciated
EDIT:
invoking "mfastboot flash partition gpt.bin" command gives the error too so i am unable of installing stock firmware too
EDIT2:
i've successfully installed stock package but there is still a problem - boot loop.

you need to flash stock rom to remove boot loop.
here is the link
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639

sachin09 said:
you need to flash stock rom to remove boot loop.
here is the link
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Click to expand...
Click to collapse
I have already flashed the rom but now i think it could be a bad package. My phone is from spain and i installed before:
XT1541_OSPREY_ORAES_6.0_MPI24.65-33_cid7_subsidy-DEFAULT_CFC.xml
now i'm downloading
XT1541_OSPREY_RETES_6.0_MPI24.65-33_cid7_subsidy-DEFAULT_CFC.xml.zip
is there any way to find out which package should i use for sure?
the last package i mentioned doesnt change anything. phone boots to bootloader not to system.

any news i have the same thing with my device everything was flashed but i get boot faillure ??

nothing... i'll get my money back i guess