[Q&A] UPDATED 9/30 [ROM][P900][P900UEU1BNI2] Original Stock and Debloated Stock Vari
Q&A for UPDATED 9/30 [ROM][P900][P900UEU1BNI2] Original Stock and Debloated Stock Variants
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for UPDATED 9/30 [ROM][P900][P900UEU1BNI2] Original Stock and Debloated Stock Variants. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
will it work on SM-P901 ?
i really like to try the debloated version,
my stock rom is a bit laggy for me
will it work on SM-P901 version?
i really hope it work
16person said:
i really like to try the debloated version,
my stock rom is a bit laggy for me
will it work on SM-P901 version?
i really hope it work
Click to expand...
Click to collapse
I do not feel completely confident it would work , not enough to tell you to take that risk.
Although they do appear to have the exact same hardware chip wise (the cpu/gpu are identical) I would need someone who is rooted on the 901 to check that the partition tables are identical to the sm-p900. The biggest one being that /boot is still mmcblk0p9. If /boot was set to the wrong block because they are slightly different you would end up with a bricked tablet, which would be awful. There is also the unknown of different parts in the firmware to account for the sm-p901 having 3g support while the sm-p900 is only wifi.
16person said:
i really like to try the debloated version,
my stock rom is a bit laggy for me
will it work on SM-P901 version?
i really hope it work
Click to expand...
Click to collapse
I think it will work, but you need to replace kernel (boot.img file) from your tab
edit: possibly not. I didnt find any libs with 3g support in p900 rom...
bonuzzz said:
I think it will work, but you need to replace kernel (boot.img file) from your tab
edit: possibly not. I didnt find any libs with 3g support in p900 rom...
Click to expand...
Click to collapse
That was my other fear. It may flash onto it fine if the /boot is the same, but I have not seen any support for the 3g service part of it.
Will any firmware updates coming soon to this wonderful rom?
Can you add widgets to the lockscreen?
OTA and new kernal - Gatsrom's ROM
I have been using the debloated stock variation of Gatsrom's rom and love it. I also use Xposed framework. When Samsung pushes a new OTA I don't want it to screw up the Rom. Will the new OTA be blocked or is there something I need to do to block the OTA? Second question: there is discussion in the original thread about changing kernels. What is the benefit for a non-developer or non-heavy tweaker for changing kernels.
Great ROM!
Keith
Really need some help guys ive followed the install details and install twrp with odin.
Tired both roms and on reboot it just sits on the Samsung logo screen.
Can anyone help me?
Thanks, you saved me!
Gat, I rooted my None Pro 12.2 P-900. Then got Twerp up and running and put Cm 12 on. Did not like it and it was buggy. My Samsung tablet mouse and Samsung Blue tooth keyboard lost some functionality. Could not unmount flash drive which I use anew OTG cable to read the drive... leta just say I was not in a good place. Found your thread here on XDA and decided to download your Ron and flash. Had trouble the first few times, but finally am up and running thanks to you. The Cm 12 fried my 120gb micro sd, but that versus the thought of bricking this device is a small price to pay. I am out an sd but still have a functioning note pro. Cm 12 was an awful experience for a first time rooter and rom flasher. You saved me and I would like to personally thank you.
Sincerely,
Mr. Kelley aka Zenistao
Related
So, since I'm already a seasoned reader of the forums and a member of the Samsung Galaxy Ace forums right here in XDA, I bought myself a SGT2 7.0: it's great. Mine's the P3110 (Wifi only) and it came with 4.0.3. Now, I'd like to root it and mod it as I see fit but I don't see much information on the current status of things. I dug around the CM Forums and there's no SGT2 7.0 dedicated forums over there. Here I see guides on rooting and the like, but no one talks about the stable releases and/or nightlies of CM9 and CM10. So, to sum it up, here are my questions:
Is it safe to root and mod the SGT2 to CM9?
Where's the buglist of the latest stable release of CM9 for the SGT2?
Can you see a better battery life on CM9 compared with stock?
Should I download the latest OTA on my SGT2?
Now, I wouldn't have asked these questions if I see them answered here or any other forums, so that's that. Thanks in advance for any information you might offer.
As a seasoned reader, you created a question thread in general?
Please keep all question/help threads in Q&A only. Thank you.
Thread Moved
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Basically, you could have found all your answers simply by looking at the development section. But here they are :
AlterJack said:
Is it safe to root and mod the SGT2 to CM9?
Click to expand...
Click to collapse
Yes, it is. You can root using CF-Auto-Root (http://forum.xda-developers.com/showthread.php?t=1957160) or other methods that can be found in the same section. I think CF-Auto-Root is the simplest of all. Note that you don't need to root your tab if you intend to flash CM9 (or CM10 which is also available), just follow the instructions in the dedicated thread.
Main thread for CM9 : http://forum.xda-developers.com/showthread.php?t=1727420
Main thread for CM10: http://forum.xda-developers.com/showthread.php?t=1791975
ClockworkMod recovery: http://forum.xda-developers.com/showthread.php?t=1728987
AlterJack said:
Where's the buglist of the latest stable release of CM9 for the SGT2?
Click to expand...
Click to collapse
There's basically none, except the official keyboard dock is not working (although it works in AOKP). You're not concerned by IR-Blaster issue since you have a p3110.
AlterJack said:
Can you see a better battery life on CM9 compared with stock?
Click to expand...
Click to collapse
I'd say the battery life is similar. Do not expect anything battery-wise. However, you'll be able to notice improvements in performance.
AlterJack said:
Should I download the latest OTA on my SGT2?
Click to expand...
Click to collapse
If you intend to stay with stock firmware, yes. The 4.0.4 is much more fluid than 4.0.3, and p3110 has also an official 4.1.1 (Jelly Bean) update.
The only drawback of JB (in stock and CM10) is the loss of the Tablet UI, replaced by Phablet UI. However, you can restore Tablet UI on CM10 by using a patch, or natively in AOKP or Paranoid Android. I greatly encourage you to go through a few threads in the development section, to get a better sense of all of this. Do not hesitate though if you feel lost or puzzled.
Thank you very much for your fast responses. Yeah, @PeartFan40, I guess I embarrased myself, haha!
@Einril, it's not that I don't like stock, it's just the bloatware that Samsung installs that makes me go all kinds of green but I'd like to keep my options open if something ever happens to my tablet I can use my guarantee, you know? I read about the Triangle Away app, so I'm good in that area, but just a tiny question: is it mandatory to have it or can I live with that triangle? Also, could I install the official stock firmware later down the road if I'd like? Right now I'm downloading the latest update for my tablet so I can save an image with CWM for safekeeping.
And just for kicks, what's new in CM9 for tablets? I'll google myself what's Phablet UI, don't worry
Thanks again!
What Triangle Away does is that it resets your custom binary counter, which is incremented each time you flash a custom recovery. Flashing a custom recovery on the Galaxy Tab 2 won't show up a triangle at boot, so you can live without using Triangle Away. However, it is necessary to reset it before sending the tab for guarantee.
You can always flash official ROMs via Odin. You can look at http://www.sammobile.com/firmware/?page=3&model=GT-P3110&pcode=0&os=1&type=3 to find the latest firmware for your country.
What's new in CM9 ? Compared to stock? Basically a lot of customization tools, performance tools, and a more "pure-Google" experience. But it's quite complicated to list all the differences. The best way is to try it yourself
Einril said:
What Triangle Away does is that it resets your custom binary counter, which is incremented each time you flash a custom recovery. Flashing a custom recovery on the Galaxy Tab 2 won't show up a triangle at boot, so you can live without using Triangle Away. However, it is necessary to reset it before sending the tab for guarantee.
You can always flash official ROMs via Odin. You can look at http://www.sammobile.com/firmware/?page=3&model=GT-P3110&pcode=0&os=1&type=3 to find the latest firmware for your country.
What's new in CM9 ? Compared to stock? Basically a lot of customization tools, performance tools, and a more "pure-Google" experience. But it's quite complicated to list all the differences. The best way is to try it yourself
Click to expand...
Click to collapse
I already installed CM9. It was complicated at first because I had some trouble with ODIN (it seems the button Auto-reset shouldn't be marked) when I installed the CWMRecovery. Now I've downloaded ROM Manager and I'm thinking if I should install the Recovery the app offers. What do you think?
I also was tinkering with the system options and the kernel doesn't have a lot of governors. Any tips on the matter?
Hey guys converter from iPhone over here. Last time I rooted it was fairly straightforward and was able to get going quickly. This newer stuff is a little new to me.
I rooted my sprint s5 using towel root. Now what? I see roms like omega but none really say anything about the sprint model.
What should i do next to install a boottloader then a rom?
Thanks
kwwood said:
Hey guys converter from iPhone over here. Last time I rooted it was fairly straightforward and was able to get going quickly. This newer stuff is a little new to me.
I rooted my sprint s5 using towel root. Now what? I see roms like omega but none really say anything about the sprint model.
What should i do next to install a boottloader then a rom?
Thanks
Click to expand...
Click to collapse
Assuming you are a new XDA user. Welcome to the forum and be sure to read over the forum rules. They might save you some headache in the future. For example, this post should of been in the Q&A section but no biggie. A mod will move it if need be.
Anyways, about your question, this is the Sprint specific forum so all the roms here should be compatible with the Sprint S5 (900P). Some of the roms will be based off of Touchwiz (these will keep almost 100% of stock functionality while adding some extras) and AOSP roms (custom based on CM, MIUI, etc.) The first post of each rom thread will give you a good idea of what the rom has included, instructions to flash, what works and doesn't, and so on.
If you just rooted get a custom recovery on there and do a backup of the system and EFS first thing. As for bootloader, that is preference and may depend on what rom you flash but I would think you will be fine with what version you have now.
This is also a good thread to take a look at: http://forum.xda-developers.com/showpost.php?p=52456762&postcount=1
Q&A for [ROM][M4 - 4.14.401.1] Official Stock Sense 6 Rom v3 & Firmware
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][M4 - 4.14.401.1] Official Stock Sense 6 Rom v3 & Firmware. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
original htc one mini 4.4.2 RUU
I was looking for the original AT&T RUU to update my phone back to stock and yesterday i found it. I was able to upgrade from the version 2 of your ROM to the one from AT&T without any problems
I cannot post links because i am new, but i can post the filename for the file
RUU_M4_UL_K44_SENSE60_MR_Cingular_US_4.13.502.3_Radio_1.29.40g.00.19_10.32.40.1115L_release_385202_signed_with_hboot.exe
That is located on the htc site us/support/htc-one-mini-att/news/ on the very bottom of the page. the filesize is 1.12GB
enjoy !
I am trying to figure out how to install tmobile WiFi calling on this stock Rom. I know it has to be baked into the Rom during installation but need help on how to do that. Thanks
portable to the 601
im not sure the right place to put this but is this portable to the htc 601?
Quick question since I'm not that experienced in updating Sense roms: can I update from 4.09.401.3 (I think it was V2 of this?) without wiping?
Kernel
Hello.
Is there any way that i can flash just this kernel instead of the whole ROM, because i just need unsecured kernel to get s-off, and then i'm restoring stock rom and kernel? Thank you.
vukmi said:
Hello.
Is there any way that i can flash just this kernel instead of the whole ROM, because i just need unsecured kernel to get s-off, and then i'm restoring stock rom and kernel? Thank you.
Click to expand...
Click to collapse
You can if its 4.4.2 yes
xXminiWHOOPERxX said:
You can if its 4.4.2 yes
Click to expand...
Click to collapse
Well i couldn't find any way to extract kernel from this rom. If you have it separately, can you please upload it somewhere and send me the link?
Thanks,
Filip
Hi, I'm french so sorry if I make mistakes in spellings
My htc one mini repaired by the After sell official htc services, so I received the last software update, but from my operator.
In France, i have Sense 6
So I have in the notification bar "Orange F" the name of my operator, and it takes up all the space, so to remove the overlay operator I would like to take this rom, but first I have some questions
I logically should not change the firmware? (i have Hboot 2.22)
I have 4.15.73.2 logiciel number, and here it's 4.14 my phone is likely to brick if I flash this rom no ?
And finally, I am not in Supercid or S-OFF, I see in my bootloader "Tampered" and "Unlocked" but I do not see any "S-ON" or "S-OFF," I need so the S-OFF or Supercid?
xXminiWHOOPERxX, I wanted to thank you for making this ROM. It works great!
almost l**** boot loop
i downloaded an installed the file from http://forum.xda-developers.com/htc-one-mini/development/rom-official-stock-sense-6-rom-firmware-t2817921
and for some reason it wont even boot ive done this many of times and i have never had this happen to me but now i cant get in my phone if you know how to fix this please email me at [email protected]
thanks
Q&A for [KERNEL] [15 May] [920F & 920S] [AOD8 Patch] StockMOD Kernel v02d
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] [15 May] [920F & 920S] [AOD8 Patch] StockMOD Kernel v02d. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
GPS does not work properly with Kernel v02d!..
* Please add GPS Fix to thanks ..
can confirm working on 920W8
Editosted in wrong thread by mistake. ignore post
Edit2: The thread I wish to post in redirects me here b/c I am under 10 post.
I wanted to post in the Unikernel thread.
I can confirm that v0.001d does not work with the Sprint G920P variant. Please remove the misleading info from topic title.
If you need a tester to help you get this variant supported, I would be more than happy to help.
Audio stopped working on test9.zip.
Tested on g920f. Back to test6.zip
Ram management is amazing compated to stock
prerelease3
No audio on AOCV
No audio on prerelease7
Stock rooted AOCV g920f
Hello i have a problem, no deep sleep for my s6. Why ? Thanks
Envoyé de mon SM-G925I en utilisant Tapatalk
I have the G925F with 5.1.1 G925FXXU2BOFJ. I was wondering if flashing this kernel is the only way to get root on 5.1.1 G925F as of right now? Is this going to trigger the KNOX fuse protection? I'm guessing I would need to flash this kernel via ODIN,and if so is that going to include TWRP recovery as well? Thanks in advance!
Hey guys. I'm curious does anyone use the USB audio out via otg cable? I know Android is a little picky when trying to connect to a USB DAC/Amp I've gotten it to work pretty well before by changing kernels but I can't remember which one was working out. Anyone have any advice I'd appreciate it. Thanks.
Edit: OK so I don't know what I did to have it working the other day after changing kernels, but I went back and tried every kernel I have previously installed, with no luck. Now I'm confused and disappointed.
Hi guys. Do anyone know that XtreStoLite gonna be based on newest release? And when we can expect it?
So my friend tried rooting his phone with this kernel
his phone kept bootlooping so he entered recovery mode and wiped cache but it didnt change a thing can anyone help
merza kheder said:
So my friend tried rooting his phone with this kernel
his phone kept bootlooping so he entered recovery mode and wiped cache but it didnt change a thing can anyone help
Click to expand...
Click to collapse
Just flash last stock using odin.
SHiFT! said:
Just flash last stock using odin.
Click to expand...
Click to collapse
Ok ill try thanks
Does this work for the galaxy s6 5.1.1 G920FXXU3COI9
With the latest Unikernel "V9" and Kernel Toolkit we can load different Settings Profiles. What settings can I safely use as a Battery Saving profile?
I found that the "interactive" CPU scaling is: 800/2100 for a57 and 400/1500 for a53. Will it lower the battery usage when I adjust those CPU scalings?
Cheers,
Martin
Who has te stock kernel ? I want to recover some files from private mode then flashing this kernel again
Q&A for (ROM) (VZW PORT) 8/13/2015 Stock Rooted 5.1 GPE LMY47O.H6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (ROM) (VZW PORT) 8/13/2015 Stock Rooted 5.1 GPE LMY47O.H6. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
undarated said:
Maybe someone who has successfully flashed the rom will chime in. I can't be the only one!!
Click to expand...
Click to collapse
Thanks for the port. I don't have enough posts to chime in in the dev thread but flashed this last night and no issues. Super CID, EXT4 all partitions, DH firmware I believe.
Hotspot works, Google Camera came with the flash. Ended up installing Xposed, Gravity Box and Sensify to get the ROM setup to my liking.
Looks like this comes with some version of Buck's Elite kernel.
heyfrench said:
Thanks for the port. I don't have enough posts to chime in in the dev thread but flashed this last night and no issues. Super CID, EXT4 all partitions, DH firmware I believe.
Hotspot works, Google Camera came with the flash. Ended up installing Xposed, Gravity Box and Sensify to get the ROM setup to my liking.
Looks like this comes with some version of Buck's Elite kernel.
Click to expand...
Click to collapse
Glad it ended up working for you brother. I'm not a big fan of a million mods in my roms so that's why I took on the port. After owning a few nexus devices I've always tried to make my devices as close to stock android as possible. With that being said, I'm sure some people will enjoy the stock experience that this rom provides.
The kernel is the one that came with the original rom in the GSM M8 section. I didn't change it out since everything worked fine on my device.
Thank you once again for trying out my rom! undarated
How to make screenshot with this rom?