Database Info

Root acess in Kyros 8024

First, make this tutorial at your own risk, I'm not responsible for damage to the device. Well, let's go...
In links Add spaces please..
First install the drivers for the Android the link http : / / www . gamefront . com / files / 17282335 / PdaNetA245 . exe, download the version 1.7 on SuperoneClick link http : / / www . megaupload . com, connect your Kyros in debug mode, the folder will have 3 files superoneclick so "su-v1", "su-v2", "su -v3 ", rename the last file" su-v3 "to" su "only after you run the adb command under the folder where you extracted the superoneclick the cmd windows.
adb push su /etc/
adb push busybox /etc/
adb push psneuter /etc/
adb shell chmod 777 /etc/su
adb shell chmod 777 /etc/busybox
adb shell chmod 777 /etc/psneuter
adb shell
$/etc/psneuter
adb shell
#mount -o rw,remount/system
#cp /etc/su /system/bin/su
#cp /etc/busybox /system/bin/busybox
#cp /etc/su /system/xbin/su
#cp /etc/busybox /system/xbin/busybox
#chown 0:0 /system/bin/su
#chmod 6755 /system/bin/su
"ctrl+C"
adb install superuser.apk
reeboot your device, and.... root
I did on my device and got success...

LG Viper Root

So this is probably the wrong place, but I don't see anywhere more applicable, so please move if necessary.
Bought a LG Viper for the wife today, so had to root it
I found a post elsewhere (can't post URLs yet, but it's on androidcentral) that stated how using SuperOneClick, but personally I'm a CLI kind of guy, so this is for anyone using linux (probably could easily be used on Windows, I think you'd need the "LG Universal Drivers", but )
Getting right to the point, you must have adb installed and working.
Notes: Make sure you've got USB Debugging enabled at this point. Might as well make sure "Unknown Sources" are allowed as well.
Go ahead and plug your phone in to your computer now.
Step 1) Find the device on your computer
In /etc/udev/rules.d/51-android.rules add the following (editing as root):
* Note: I had recently rooted a Kindle Fire and had other config in this file, if you do to you can just prefix the lines with a "#" and it will be ignored. You can find the vendor ID by running 'lsusb'
SUBSYSTEM=="usb", SYSFS{idVendor}=="1004", MODE="0666", OWNER="YOUR-USERNAME", GROUP="YOUR-USERNAME"
Reboot at this point (or restart udev and logout/in)
Step 2) Grab a copy of "rageagaintthecage" and do the following
adb push rageagainstthecage /data/local/tmp
Step 3) Shell time
adb shell
Once you're in the prompt:
chmod 755 /data/local/tmp/rageagainstthecage
/data/local/tmp/rageagainstthecage
* Note: You'll be kicked out out the prompt at this point, as expected.
Step 4) You've got temporary root (if that's all you want, stop now), otherwise let's make it permanent
adb kill-server
adb start-server
adb shell
su
mount -o remount,rw /dev/block/mmcblk0p27 /system
adb push su /system/bin
adb shell chmod 755 /system/bin/su
Step 5) Install tools
On your phone, download "Superuser" and "Busybox Installer"
Run Busybox Installer
Step 6) Enjoy
Post up any questions, glad to help if possible

Which version of su did you use to push to the device?
The temp root has worked but when I go to install Superuser and update I get this error:
Getting exe path failed with 13: Permission denied
Any ideas? Thank.
-Shaun

When I run RATC, how long do I leave it running? I see the adb shell prompt ($) come up, but then the console feeds a line, and doesn't respond. I eventually press ^C to get back to the windows cmd prompt, but I don't know if I'm doing that too soon (it hasn't spawned all the proc it needs to yet) or if it just doesn't work.
when I type "su" into the adb shell after restarting the server, I get
[email protected]:/ $ su
su
/system/bin/sh: su: not found
I pushed a copy of su into /data/local/tmp and made it executable, but that doesn't work.
127|[email protected]:/ $ /data/local/tmp/su
/data/local/tmp/su
reloc_library[1285]: 15938 cannot locate '_mktemp'...
CANNOT LINK EXECUTABLE
255|[email protected]:/ $
Any suggestions?

[Q] yarvik luna 474 rooting

Does anyone know how to root luna tab474 as the firmware on it is terrible, even the touch does not respond well and yarvik r not any help what so ever. My kids cant play half the games and it does not seem to support flash.
Its running android 4.0 and there seems to b lack of updates off yarvik

toiletroll said:
Does anyone know how to root luna tab474 as the firmware on it is terrible, even the touch does not respond well and yarvik r not any help what so ever. My kids cant play half the games and it does not seem to support flash.
Its running android 4.0 and there seems to b lack of updates off yarvik
Click to expand...
Click to collapse
try this: http://forum.xda-developers.com/showpost.php?p=41229206&postcount=3

Tried that but no joy. Used bin4ry root and restore now have Su on it that's as far as I got so far
Sent from my HTC One S using xda app-developers app

Yarvik 474 root
The Yarvik 474 by default is "rooted", but technically is not . The busybox and the su don't work propoerly.
To make it work, we have to change them.
Preparation :
1.) download ADB,SU, Supersuser.apk ("www48.zippyshare.com/v/60795775/file.html")
2.) download busybox to the same directory ("busybox.net/downloads/binaries/latest/busybox-armv7l" )
2.b.) rename "busybox-armv7l" to "busybox".
Start the rooting:
1.) Connect your Yarvik 474 to your PC with USB "debug on"
2.) Open "DOS" terminal on your PC and type:
adb devices
adb remount
adb shell "mkdir /data/busybox"
adb push busybox /data/busybox/busybox
adb push busybox /system/sbin/busybox
adb push su /system/sbin/su
adb push Superuser.apk /system/app/
adb shell
chmod 644 /system/app/Superuser.apk
mv /bin/su /bin/su2
mv /bin/busybox /bin/busybox2
cd /data/busybox
chmod 04755 busybox
chown root.root busybox
./busybox --INSTALL /system/sbin
cd /system/sbin
chmod 04755 su
chmod 04755 busybox
chown root.root su
chown root.root busybox
cd /bin
ln /system/sbin/su su
ln /system/sbin/busybox busybox
3.) restart your tablet
You have a full rooted Yarvik 474!!!

[GUIDE][ROOT] Root almost any china android phone

Use any 1 of the following methods.
I have personally tried these on 2 of my china android phones.
1. Using linux {Recommended}Install Ubuntu or DebianEither
Install the android-sdk.
dl.google.com/android/adt/adt-bundle-linux-x86-20130717.zip <==x86
dl.google.com/android/adt/adt-bundle-linux-x86_64-20130717.zip <==x86_64
or
Just get the standalone adb and fastboot executables
texasice-cream-sandwich-mirror.googlecode.com/files/adb_fastboot.zip​Install ia32-libsRun this in a terminal
Code:
sudo apt-get install libc6-i386 lib32stdc++6 lib32gcc1 lib32ncurses5
Now download the files required for root and put it in the same folder as adbmir.cr/GDEPZT4V​After you finish installing the files,
Connect your device with debugging mode enabled
Run
Code:
cd path/to/adb
where "path/to/adb" is the directory of your adb file
Now run
Code:
sudo chmod a+x adb
sudo chmod a+x fastboot
>>Root
Code:
./adb devices
./adb push psneuter /data/local/tmp/
./adb push busybox /data/local/tmp/
./adb push su /data/local/tmp/
./adb push Superuser.apk /data/local/tmp/
./adb shell
Chmod and run the exploit under adb shell
Code:
cd /data/local/tmp/
chmod 755 psneuter
./psneuter
Now re-engage an adb shell to check if the exploit worked.
Code:
./adb kill-server
./adb devices
./adb shell
If you see a # sign, the exploit was was successful. Otherwise repeat from >>Root
Now run these on the same adb shell
Code:
cd /data/local/tmp
./busybox ash
mount -o remount,rw /dev/block/mtdblock0 /system
cp /data/local/tmp/su /system/xbin/su
chmod 6755 /system/xbin/su
chown 0.0 /system/xbin/su
cp /data/local/tmp/Superuser.apk /system/app/Superuser.apk
chmod 777 /system/app/Superuser.apk
cp /data/local/tmp/busybox /system/xbin/busybox
chmod 6755 /system/xbin/busybox
Now reboot your device and open up SuperSU. Let it update the binary.
Your device should be rooted. ​2. Use Windows + MoboroboMethod 1 {Recommended but hard}
Download Moborobo from
Code:
moborobo.com
This software can Install drivers for many china phones and other branded phones.
After installing Moborobo download the files required for root
Code:
mir.cr/GDEPZT4V
Extract the files to the installation directory of Moborobo.
Code:
C:\Program Files (x86)\Moborobo
Run a CMD window under that directory and type
Code:
xcopy AndroidInterface.exe adb.exe
Connect your device in debugging mode & Open up Moborobo, It will install the drivers.
Keep Moborobo open & Follow the instructions mentioned in >>Root
P.S- the linux commands begin with a "./" remove this in windows or else it won't work. Note: Wherever I mentioned a terminal, the windows equivalent to this would be cmd​Method 2 {Easier}
Download and Install Moborobo just like above and run this under a cmd on that folder
Code:
xcopy AndroidInterface.exe adb.exe
Also download UnlockRoot or SuperOneClick
To make sure the adb files are of the same version, Copy over
Code:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
to UnlockRoot's tools directory or SOC's ADB directory
Connect your device in debugging mode and open up moborobo.
Now keep Moborobo open and Run UnlockRoot or SOC. ​Good Luck :good:
---Smo0thK, team BL4CKF1R3---
Click thanks if I helped you.
[/COLOR]

Hi there!
under method 2 in the end...I could not locate ROOT nowhere.....

>>Root
arena1 said:
Hi there!
under method 2 in the end...I could not locate ROOT nowhere.....
Click to expand...
Click to collapse
I said follow the instructions mentioned in ">>Root".
I named a step in Method one as ">>Root". So I meant you should repeat those steps.

Now download the files required for root and put it in the same folder as adb
mir.cr/GDEPZT4V
Click to expand...
Click to collapse
What files?
EDIT: managed to do all the steps using method 1 in windows but got this message with executing ./psneuter :
mnmap() failed. Invalid argument

I used windows to root
failed at adb shell psneuter command...
/system/bin/sh: psneuter: not found
how to proceed ?

[Q] TV BOX B351 android B351 rk31sdk

Hi can anyone please help with this Tv Box Quad-Core-Android-4-2-Rockchip-RK3188-Mini-PC-Smart- tv box works great the problem is some software need this box to be rooted i no how to connect to a pc shows up as a drive with folders here is the spec
* Android Device Brand rk31sdk
* Android Device Name PC Smart TV BOX Media Player
* Android Device Model B351 rk31sdk
* Android Version 4.2
* Build Number rk31sdk-eng 4.22 JDQ39/eng.linking.20140114.142223eng/test-keys

This is to help anyone with a similar device and I'll be brief;
First Install The Windows Drivers (you know, so you can actually talk to it)
i.e. from here... http://www.cnx-software.com/2013/11/08/simplified-method-to-install-rockchip-usb-drivers-in-windows-xp78/
If you have two Micro USB ports, work out which one is the power only v's the switchable USB guest / host one.
In setting, enable USB debug & then enable USB "connect to PC"
Windows should now detect and load the drivers for the device.
When the device is rebooted, you'll need to re-enable the "connect to PC" setting each time.
I found this package online that works for root but they left out of the script to copy the Super User App to the device. http://www.cnx-software.com/2013/03/19/how-to-root-rockchip-rk3188-mini-pcs/
The Archive Contains these files you'll need;
binary "su"
binary "SuperSU.apk"
binary "busybox"
binary "RootExplorer.apk"
It also contains the standard adb application
"TPSparkyRoot.bat" [modified] should contain;
Code:
@echo off
CD /D "%~dp0"
echo *---* VonDroid.com N101 II Root Tool based on work by sunnydavid *---*
echo --- Plug in your device, make sure debugging is enabled in Developer Options
echo --- This script will now copy files over to your N101 II
echo.
adb shell mv /data/local/tmp /data/local/tmp.bak
adb shell ln -s /data /data/local/tmp
adb reboot
echo --- Reboot 1/3 - Press Space Bar once the device has rebooted
pause
adb shell rm /data/local.prop > nul
adb shell "echo \"ro.kernel.qemu=1\" > /data/local.prop"
adb reboot
echo --- Reboot 2/3 - Press Space Bar once the device has rebooted
pause
adb shell id
echo --- If the ID shows as 0/root then continue, otherwise CTRL+C to cancel and start over
pause
adb remount
adb push su /system/bin/su
adb shell chown root.shell /system/bin/su
adb shell chmod 6755 /system/bin/su
adb push busybox /system/bin/busybox
adb shell chown root.shell /system/bin/busybox
adb shell chmod 0755 /system/bin/busybox
echo --- Installing SuperSU
adb push SuperSU.apk /system/app/SuperSU.apk
adb shell chown root.root /system/app/SuperSU.apk
adb shell chmod 0644 /system/app/SuperSU.apk
adb push RootExplorer.apk /system/app/RootExplorer.apk
adb shell chown root.root /system/app/RootExplorer.apk
adb shell chmod 0644 /system/app/RootExplorer.apk
echo Completing Root
adb shell rm /data/local.prop
adb shell rm /data/local/tmp
adb shell mv /data/local/tmp.bak /data/local/tmp
adb reboot
echo echo --- Reboot 3/3 - Your N101 II should now be rooted
pause
echo on

aboxy said:
Hi can anyone please help with this Tv Box Quad-Core-Android-4-2-Rockchip-RK3188-Mini-PC-Smart- tv box works great the problem is some software need this box to be rooted i no how to connect to a pc shows up as a drive with folders here is the spec
* Android Device Brand rk31sdk
* Android Device Name PC Smart TV BOX Media Player
* Android Device Model B351 rk31sdk
* Android Version 4.2
* Build Number rk31sdk-eng 4.22 JDQ39/eng.linking.20140114.142223eng/test-keys
Click to expand...
Click to collapse
Did you find rom for this version ? searching for Build Number rk31sdk-eng 4.22 JDQ39

Gonna try this now have the exact same model no.
Sent from my GT-I9505 using XDA Free mobile app