hello,
I ordered the lower part with mic/LED/microUSB port and there is a big difference between the original part from inside the phone and the one that I ordered from http://www.parts4repair.com/.....can anyone help my with some info?
P.S the spare part has no LED notification
If the part is different it isn't genuine. What help do you need?
Related
Hi everyone, I was wondering if someone would be able to help me with my question/problem. I'm kind of new to this site, so please excuse me if I seem noobish. I tried looking everywhere in the forums for something similar to my predicament, but I didn't find anything. Either that, or I didn't look very well.
Anyways, I'll try to be as brief as possible. I bought a broken Samsung Galaxy S2 with a cracked screen and broken digitizer for $100. My plan was to swap out everything with replacement parts, but when I took it apart to check the model number (because I noticed some differences from my i9100) I found out that it was the Korean-type S2. The model number is SHW-M250S. I looked everywhere on Ebay and Amazon for the lcd screen and digitizer for this exact model, and nothing came up except the regular i9100 lcd+digitizer replacements. Link below:
http://www.amazon.com/Display-Digit...=wireless&ie=UTF8&qid=1326413607&sr=1-1owever
I did check on Amazon, and the closest thing I was able to find for the shw-m250s model are these items that are in the link below. Other than the lcd screen and digitizer, it also comes with a brand new housing and other parts I don't need. Which is just making it more expensive. Link below:
http://www.amazon.com/Touchscreen-D..._1_3?s=wireless&ie=UTF8&qid=1326418770&sr=1-3
My question is, can I use a regular i9100 lcd screen and digitizer replacement part for my SHW-M250S model, or at least use the (SHW-M250L) model part that I found on Amazon? The SHW-M250L parts look very similar to the one that I have. (That "L" could be a typo) If not, can someone send me a link to a site or place where I can buy ONLY the lcd screen and digitizer part for my exact model?
Thanks a lot in advance.
-Davin
bump
Hmm, 90+ views... but no reply. Can anyone help me?
Hello,
Did you try the i9100 lcd screen and digitizer replacement on shw-m250s?
If yes and it is successful, please let me know. Even I am facing the same issue
Thanks in advance
Hi Everyone
To further my other thread here:
http://forum.xda-developers.com/showthread.php?p=46437650#post46437650
Can anyone help my choose a digitizer that either matches my original OR can run the calibration tool successfully. The serial number on my previous digitizer is :
PYD V1.1
E219454 1
9U ICAC ichia
94V-8 1135
The one I currently have fitted is from here:
http://www.ebay.co.uk/itm/231026097776?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Basically the screen is unresponsive at the edges of the screen as well as being inaccurate, real pain when trying to type!!
I have tried using the PG58DIAG.nbh but get the error message TP_ATT always keep in High
Compared to my original digitizer the ribbon looks completely different! The chip is smaller and the way the serial number is written out (See attached)
I have been reading around a lot but can't work out the best place to get one from. Is it a case of getting any digitizer that can run the calibration tool successfully? I am located in the UK if that makes a difference where I can buy from.
I have read something about EL and non EL digitizers? The digitizer I bought did have a blue sticker with EL on it in white text
Any help you can give would be massively appreciated :good:
Thanks everyone
James
Any ideas anyone? :fingers-crossed:
Bump
Anyone at least know where I can get a digitizer that will work with the calibration software? Really driving me nuts now and I can't afford to keep buying digitizers hoping they will work
james631 said:
Anyone at least know where I can get a digitizer that will work with the calibration software? Really driving me nuts now and I can't afford to keep buying digitizers hoping they will work
Click to expand...
Click to collapse
I recommend contacting multiple vendors with your digitizer ribbon info, I contacted four vendors and one of them replied with the right format digitizer. I am in the US so not sure If I can point you to a vendor as my HTC Sensation is for T-Mo USA.
loube said:
I recommend contacting multiple vendors with your digitizer ribbon info, I contacted four vendors and one of them replied with the right format digitizer. I am in the US so not sure If I can point you to a vendor as my HTC Sensation is for T-Mo USA.
Click to expand...
Click to collapse
Is there a difference in the digitizers? A lot of sellers I have contacted will not give me the ribbon info most of the time saying there isn't anything printed at all!
james631 said:
Is there a difference in the digitizers? A lot of sellers I have contacted will not give me the ribbon info most of the time saying there isn't anything printed at all!
Click to expand...
Click to collapse
There are differences in the digitizer yes. The biggest difference is what is on the front of your digitizer does it just say, htc (top middle) or does it have htc (left top) and carrier (right top). The first replacement I received only had htc(top middle) and it did not work I then purchased a replacement and that one did work. I have seen the white ribbon cable writing in two formats:
(My original)
PYD V1.0
E219454<->1
ICACichia
94v-0 1119
I received 2 with the above format one worked the other didn't. The one that worked ended in 1119 the one that didn't ended in 1115(centered htc logo)
(unused replacement)
PYD V1.0
SW-10 94v-0
E308252 1123
I have this spare because I contacted the first vendor and they sent me a free replacement.
My Nexus screen crashed when I sadly droped it to the ground.
So, i'll buy a new replacement screen and change myself.
I just looked at ebay and it has lots of sellers of OEM LG Original Screen replacements, but they all send from China.
Is that right? I mean, it will really be original parts from LG?
Can I trust them?
Also, my Nexus 5 is the white version, but I saw I can change the battery cover, and i thinking of buying a new one in Red color.
Should I be worried about changing the back cover? Some compability problem between versions?
I've bought plenty of phone stuff from China and most of it is legit... in fact, even the stuff sold as not from China probably still came from China originally. As for the cover, there is no difference other than colour so you will be fine if you want to change to red
Hello i bought a cheap azpen A785 for a project but accidentally broke the digitizer. Looking for one but sadly i can only find one supplier who sells 5 minimum. This is the digitizer info with one question . can anyone point me in the direction of a compatible digitizer . and if possible explain how to determine how to know on comparability for future reference thanks again
Digitizer:
HOTATOUCH C196131J1-FPC822DR GSL3670
Heres a pic of ribbon
Thanks
Hey Guys, I need some advice. Recently the charging port on my Idol 3 damaged (the tab on the inside broke and fell out) and now i'm kinda in a fix since I need the part. I have the 6045I model and i only see the entire board thing (With vibrator motor and Charging Port) selling for the 6045Y and the different models. Can anyone advise me as to where i could pick up the part for my model and if the different models matter?