Related
Dear XOLO Q3000 Users,
I am porting today the Kit Kat 4.4 for our device. It is based on the ROM of Wammyz 4.4. I just mode that by copy and paste of some files from other ROMS and made it work for this devise. It is just a copy and past one and nothing is created by me.
I have added some more application and improved the audio and video features.
Like the other initial 4.4 kitkat ROMs, there was a problem with blue tooth. To make blue tooth to work. Follow the steps below:
Method 1:
1. Put off the wifi.
2. put on the blue tooth
3. Immediately just put one the blue tooth. For me it worked.
Method 2:
1. Go to Apps , go to all and choose Blue tooth button
2. Clear Cache and clear data
3. Restart the phone in safe mode and this will disable the 3rd party applications
4. Now repeat the step one and two
5. Now go to settings and put off wifi
6. Put on blue tooth and immediately put on wifi
7. The blue blue tooth will start working.
In case of again some problem with blue tooth, kindly repeat the above step.
Down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOE1SRF9vMUlFMVU/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the WIPE all
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Wait for the Carrier signal to come.
7. After choosing the carrier please put off the phone and wait for one or 2 minute and restart the phone.
8. Enjoy.
This ROM has not erased my carrier signal one several booting up exercises. But in case if it happens. Then to safe card your nvram and “IMEI” I have built in in the ROM to save your nvram and IMEI. Please use them to re-activate yout IMEI
Below are some of the Screen shots:
Please notice the Internal storage. Mine is 2 GB. To make the internal storage as 2 GB, you may have to flash the attached E1 and E2 files replacing your files available in the stock flash ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment storage.zip
Hello, first of all i want to thank you for the kit-kat rom :good: although i didnt try it yet..I have a question.. can we flash this rom without changing our internal storage? is it necessary to change our internal storage to 2 gb? if yes can you please explain the steps to do it..And does the phone work well after flashing the rom i mean are there any lags/bugs in the phone after flashing it..
You need not increase the storage. You can flash it as it is.
If you need more internal storage you can accommodate most needed things. Like different codecs for videos flashes games etc. I am trying how we can increase Ram though it is in the hardware part. It may be possible to some extant if we can get virtual Rams through software.
I am just learning.
Sent from my Q3000 using xda app-developers app
To my experience and tests in my phone there is no lack better than the stock Rom still we can improve the functions we can accommodate Sony sound system etc. I am already succeeded to some extant Soon you will get more.
Note3 Rom I am just have attending to solve camera function. Soon you will get.
Thanks for your interest
Sent from my Q3000 using xda app-developers app
Hello brother!! i tried ur kit-kat rom today..it is awesome bro :victory: :victory: thank you for this rom... But i discovered a lot of bugs in version...
If possible can u please try to make it work without any bugs...
Bugs i discovered:
1) Google Playstore doesn't work..Displays an error.( Sorry Google Play has encountered an error)
2) When charging the phone there is no animation of battery being charged although LED bulb on the top lights up...But there is no animation in the status bar.
I haven't discovered other bugs..If i find any more will update..But bro ur work is awesome..Please work on these bugs and come out with the update of this rom..Thank you once again...
Thainks. Commuting Sunday I shall do it. Animation can be Achieved. In my phone Play store is normal any how I will look into it. I am not satisfied with the Audio. I will smoother it and improve the performance.
May be with inbuilt enhanced storage etc.
Thanks for your comments
Sent from my Q3000 using xda app-developers app
can you make
puduraja said:
Thainks. Commuting Sunday I shall do it. Animation can be Achieved. In my phone Play store is normal any how I will look into it. I am not satisfied with the Audio. I will smoother it and improve the performance.
May be with inbuilt enhanced storage etc.
Thanks for your comments
Sent from my Q3000 using xda app-developers app
Click to expand...
Click to collapse
can you make this for xolo q1010
my questions??
is there dual sim work??
which rom you have ported plz pm me all of your procedure
gohel.vishal said:
can you make this for xolo q1010
my questions??
is there dual sim work??
which rom you have ported plz pm me all of your procedure
Click to expand...
Click to collapse
Dual sim is working in Q3000 but I do not know about q1010, but hope it will work in q1010 also.
I am using XOLO q 3000 and not having a1010. I can mold this rom as a special case for you and send it through PM / couds. You can try. If it is ok please reply but you may have to wait till tuesday. Now I am trying NOTE 3 rom for q3000. In my personal custom rom,a mixture of XOLO, Xperia and Samsung apps/bins etc with XOLO bas has more AUDIO and VEDIO clarity, I have to improve the quality of this kitkat rom.
Thanks for your encouragement and soon send you the this ROM for Q1010.
can you please suggest something abt google playstore..i tried uninstalling it and installing the new apk but that didn't work...
mhp1995 said:
Hello brother!! i tried ur kit-kat rom today..it is awesome bro :victory: :victory: thank you for this rom... But i discovered a lot of bugs in version...
If possible can u please try to make it work without any bugs...
Bugs i discovered:
1) Google Playstore doesn't work..Displays an error.( Sorry Google Play has encountered an error)
2) When charging the phone there is no animation of battery being charged although LED bulb on the top lights up...But there is no animation in the status bar.
I haven't discovered other bugs..If i find any more will update..But bro ur work is awesome..Please work on these bugs and come out with the update of this rom..Thank you once again...
Click to expand...
Click to collapse
Regarding charging Animation of battery signal on the status bar,
Go to settings, go to display, search at the bottom line, there you find Charging Style.
Open it and you will what all you wanted and more. Just patiently do the exercise and choose to your taste.
Play store to me did not cause the same error but it was little delayed. You should do a through and clean wipe may be twice.
The delay may be due to the old play store apk that has come with the base ROM.
Any how I am porting a zip file that has the recent play store which will over write and update the current one Kindly extract the apk file from the zip folder and take to your sd card.
Through file manager or file explorer, select this apk and flash it,
I hope it will upgrade the current one.
If the problem still persists, then, I am yet to revamp this rom and please wait till tonight and I will port a revamped afresh ROM
View attachment com.android.vending-4.6.16.apk.zip
I have improved the audio and shringed the size. Though Xperia key board, super Camera, Album etc working fine but new problem of Google key board cropped up.
It will take one or two more days to port the improved rom
Sent from my Spice Mi-535 using XDA Free mobile app
puduraja said:
I have improved the audio and shringed the size. Though Xperia key board, super Camera, Album etc working fine but new problem of Google key board cropped up.
It will take one or two more days to port the improved rom
Sent from my Spice Mi-535 using XDA Free mobile app
Click to expand...
Click to collapse
1st of all very thanks to u
atleast some one has started porting rom for our beautiful device
can u plz port miui rom for our handset
and some camera related changes like i get full white photograph when we click a pic from very short distance
thanks once again
drlalitbida said:
1st of all very thanks to u
atleast some one has started porting rom for our beautiful device
can u plz port miui rom for our handset
and some camera related changes like i get full white photograph when we click a pic from very short distance
thanks once again
Click to expand...
Click to collapse
I have already ported 2 custom roms of MIUI for this phone. Please refer to the url belkow:
http://forum.xda-developers.com/showthread.php?t=2725881
http://forum.xda-developers.com/showthread.php?t=2743926 http://forum.xda-developers.com/showthread.php?t=2743926
If you are free take every thing under XOLO Q 3000 in a separate charter. I do not find much time to do this. We can include others works also in a seperate charter. All about XOLO Q 3000. Some more will come from me for this phone. Increase internal storage to 7 or 2 GB
Thanks for your encouragement.
Improved KITKAT with Enhanced Audio and Video etc.
Please find ported a revamped custom kit kat 4.4 ROM for our phone XOLO Q3000. The audio system is improved.
Extra useful apps are added.
Bugs. unfortunately Google key board not functioning: You can just ignore this or go to settings, go to apps and goto all. In All search for google key board. Do this, clear data, disable and force stop.
Now this pop up would stop.
I have just used it for one day only and find no other bugs.
Audio and Video are good Charging is normal and sucking. I have not played any games. Please check it and report.
Xposed modele is already added in the earlier version also. You can update and do the required downloads. But do not upgrade to the latest one it may fail. Try to upgrade one by one starting from 2.1.2 onwards. I have no patience to check. The current one is functioning.
If you meet with any difficulties please ask here. Follow the same installation procedure.
Please do the back up of your ROM. it is always advisable
--------Download and place the zip file in sd card
--------Open recovery go to wipe and wipe all
------- come back and touch instal section
------- installed the just downloaded and rom placed in the sd card
------- Reboot and enjoy.
Please carry out a thorough cleaning of all.
The new rom is available in the google drive url:https://drive.google.com/file/d/0Bz8Fgu4wkBnqeDRPQUZNTEJ3cjQ/edit?usp=sharing
Enjoy
I shall give you in a day or 2 how you can improve the inernal storage from 1 GB to 1.93 or 2.46 or 2.73 of 7 GB please wait for some more hours.
puduraja said:
Please find ported a revamped custom kit kat 4.4 ROM for our phone XOLO Q3000. The audio system is improved.
Extra useful apps are added.
Bugs. unfortunately Google key board not functioning: You can just ignore this or go to settings, go to apps and goto all. In All search for google key board. Do this, clear data, disable and force stop.
Now this pop up would stop.
I have just used it for one day only and find no other bugs.
Audio and Video are good Charging is normal and sucking. I have not played any games. Please check it and report.
Xposed modele is already added in the earlier version also. You can update and do the required downloads. But do not upgrade to the latest one it may fail. Try to upgrade one by one starting from 2.1.2 onwards. I have no patience to check. The current one is functioning.
If you meet with any difficulties please ask here. Follow the same installation procedure.
Please do the back up of your ROM. it is always advisable
--------Download and place the zip file in sd card
--------Open recovery go to wipe and wipe all
------- come back and touch instal section
------- installed the just downloaded and rom placed in the sd card
------- Reboot and enjoy.
Please carry out a thorough cleaning of all.
The new rom is available in the google drive url:https://drive.google.com/file/d/0Bz8Fgu4wkBnqeDRPQUZNTEJ3cjQ/edit?usp=sharing
Enjoy
I shall give you in a day or 2 how you can improve the inernal storage from 1 GB to 1.93 or 2.46 or 2.73 of 7 GB please wait for some more hours.
Click to expand...
Click to collapse
is there any way to increase internal memory
or memory swap kind of thing
puduraja said:
I have already ported 2 custom roms of MIUI for this phone. Please refer to the url belkow:
http://forum.xda-developers.com/showthread.php?t=2725881
http://forum.xda-developers.com/showthread.php?t=2743926 http://forum.xda-developers.com/showthread.php?t=2743926
If you are free take every thing under XOLO Q 3000 in a separate charter. I do not find much time to do this. We can include others works also in a seperate charter. All about XOLO Q 3000. Some more will come from me for this phone. Increase internal storage to 7 or 2 GB
Thanks for your encouragement.
Click to expand...
Click to collapse
I was thinking of doing the same thing..I think i will do it when i find sum time..And of course all You will be thanked and mentioned in that thread for all the work you have done..
mhp1995 said:
I was thinking of doing the same thing..I think i will do it when i find sum time..And of course all You will be thanked and mentioned in that thread for all the work you have done..
Click to expand...
Click to collapse
Thanks.
It will be good.
increased storage upto 7.0 GB
drlalitbida said:
is there any way to increase internal memory
or memory swap kind of thing
Click to expand...
Click to collapse
To night I am porting the required files and procedure there one in the mean time please look at the snap shots.
It is due to network problem and time availability.
Thanks for the encouragement.
drlalitbida said:
is there any way to increase internal memory
or memory swap kind of thing
Click to expand...
Click to collapse
Dear XOLO Q3000 friends,
I am porting today some files to increase the internal phone storage to 1.93 GB or to 2.46 GB or to 2. 7 GB or 7 GB size. There are many short cuts also. But to be on the safe side and trouble free one, I am providing with the smartphone tool to install the stock rom and respective files loaded in the same stock rom.
I have also provided the Carliv Touch recovery that you can change afterwards. We can flash the Carliv touch recovery in the first go. It is advisable to opt for stock recovery flash first.
Please download the Smart Phone Flash Tool SP_Flash_Tool_v3.1328.0.183a provided here. You can also use the your own SPFT that you have been using to handle your Q 3000.
If you have not installed the drivers, to ease your process I am providing the driver files also. In all there are 8 drivers and please try to install all the 8 drivers.
Please down load the base ROM file that is provided in the .7z format file and down load it , open it and take to your desk top where you might already have your SPFT tool also.
Click opens the flash tool .exe file and waits for the tool to open up.
Then click the Scatter file and take your curser the scatter file provided in the XOLO_Q3000_S003_15102013
This wll automatically open all the required files for the successful flash of the rom, the stock boot, stock recovery, stock EBR1 and EBR2 (EBRo and EBR2o in my folder) will be loaded.
Now chose your storage requirement, 193,246 or 273 or 7z which corresponds to 1.93, 2.46, 2.73 and 7 GB internal space. Both and respective EBR1 and EBR2 has to loaded and please take care.
After loading either you click Firmware upgrade or download to flash the rom.
Please note while uploading the SPTF stock Rom 2.73 GB ebr was not loaded and it is given here and take it and use as you please.
Wait for the yellow bar to pass and green circle to pop up.
Enjoy the increase storage.
Down load the file from the url below:
https://drive.google.com/file/d/0B_VkcZ4fOFKaWTdXR0hCUUVESVU/edit?usp=sharing
View attachment 2.7gb.7z
View attachment SP_Flash_Tool_v3.1328.0.183a.7z
View attachment 2743778
View attachment Driverxolo.tar
Once you flash this rom with the storage you chose. next step is to change the recovery to the CARLIV touch one, which is provided inside the flah rom. After flashing this as usual you can flash the custom rom which ever you want. It is advisable to reboot twice or thrice with the gap of 2 minutes and carryout your operation.
Please note when i flashed the 7 gb partician the secong imei was notg shown and after 2 reboots the sim worked. May be for other roms it may happen. Also it is advisable to format factory data reset using the phone settings to confirm your storage capacity.
Please write here for any problems or difficulties I shall try to provide if feasible the solutions.
puduraja said:
Dear XOLO Q3000 friends,
I am porting today some files to increase the internal phone storage to 1.93 GB or to 2.46 GB or to 2. 7 GB or 7 GB size. There are many short cuts also. But to be on the safe side and trouble free one, I am providing with the smartphone tool to install the stock rom and respective files loaded in the same stock rom.
I have also provided the Carliv Touch recovery that you can change afterwards. We can flash the Carliv touch recovery in the first go. It is advisable to opt for stock recovery flash first.
Please download the Smart Phone Flash Tool SP_Flash_Tool_v3.1328.0.183a provided here. You can also use the your own SPFT that you have been using to handle your Q 3000.
If you have not installed the drivers, to ease your process I am providing the driver files also. In all there are 8 drivers and please try to install all the 8 drivers.
Please down load the base ROM file that is provided in the .7z format file and down load it , open it and take to your desk top where you might already have your SPFT tool also.
Click opens the flash tool .exe file and waits for the tool to open up.
Then click the Scatter file and take your curser the scatter file provided in the XOLO_Q3000_S003_15102013
This wll automatically open all the required files for the successful flash of the rom, the stock boot, stock recovery, stock EBR1 and EBR2 (EBRo and EBR2o in my folder) will be loaded.
Now chose your storage requirement, 193,246 or 273 or 7z which corresponds to 1.93, 2.46, 2.73 and 7 GB internal space. Both and respective EBR1 and EBR2 has to loaded and please take care.
After loading either you click Firmware upgrade or download to flash the rom.
Please note while uploading the SPTF stock Rom 2.73 GB ebr was not loaded and it is given here and take it and use as you please.
Wait for the yellow bar to pass and green circle to pop up.
Enjoy the increase storage.
Down load the file from the url below:
https://drive.google.com/file/d/0B_VkcZ4fOFKaWTdXR0hCUUVESVU/edit?usp=sharing
View attachment 2743776
View attachment 2743777
View attachment 2743778
View attachment 2743805
Once you flash this rom with the storage you chose. next step is to change the recovery to the CARLIV touch one, which is provided inside the flah rom. After flashing this as usual you can flash the custom rom which ever you want. It is advisable to reboot twice or thrice with the gap of 2 minutes and carryout your operation.
Please note when i flashed the 7 gb partician the secong imei was notg shown and after 2 reboots the sim worked. May be for other roms it may happen. Also it is advisable to format factory data reset using the phone settings to confirm your storage capacity.
Please write here for any problems or difficulties I shall try to provide if feasible the solutions.
Click to expand...
Click to collapse
done successfully
increased internal memory to 7 gb
thanks a lot
Any queries about RESURRECTION REMIX should be discussed here
Sent from my TAOSHAN..!
format the system through the “mounts and storage” submenu.
I am intending to install the latest version of RR on my rooted i9300, loaded with CWM and CWM Rom Manager.
I have watched the excellent video on how to install RR and have researched on XDA the steps to be taken to back-up data an,the Rom and settings..
I have saved my WIFI settings on an external SD and the EFS file, using EFS Professional is backed-up on my Samsung laptop.
My i9300 is running a late version stock Rom, which I installed using Odin. I have never previously flashed any custom Rom on this device.
My current Rom and data is backed-up with Kies and I intend a further full back-up to Cloud using Titanium Pro.
My S5660 runs a very stable CM 10.1.6,, which I successfully flashed earlier this year and have some understanding of the process.
Now to my questions.
1) I understand that (like computers) mobile phones operate better if there is a full format before loading a different ROM.
http://forum.xda-developers.com/showthread.php?t=2708719
I am therefore tempted to adopt the advice here ...
http://www.droidreport.com/how-inst...ion-remix-rom-samsung-galaxy-s3-gt-i9300-5227
namely of formatting the system through the “mounts and storage” submenu in addition to the basic 'spring clean'.
If I do so, will I need to reload the EFS backed-up on to my computer, or will the format not affect the existing EFS partition?
2) I have read that changing the kernel to the Omirom i9300 kernal, shown here, improves performance.
http://boeffla.df-kunde.de/sgs3/boeffla-kernel-omni/omni11_download/Series 2.x/2.2/
Do I wait until after installing RR?
There are two versions one with and one without checksum. Do I need the checksum version if I am flashing it after installing RR?
baltics said:
I am intending to install the latest version of RR on my rooted i9300, loaded with CWM and CWM Rom Manager.
I have watched the excellent video on how to install RR and have researched on XDA the steps to be taken to back-up data an,the Rom and settings..
I have saved my WIFI settings on an external SD and the EFS file, using EFS Professional is backed-up on my Samsung laptop.
My i9300 is running a late version stock Rom, which I installed using Odin. I have never previously flashed any custom Rom on this device.
My current Rom and data is backed-up with Kies and I intend a further full back-up to Cloud using Titanium Pro.
My S5660 runs a very stable CM 10.1.6,, which I successfully flashed earlier this year and have some understanding of the process.
Now to my questions.
1) I understand that (like computers) mobile phones operate better if there is a full format before loading a different ROM.
http://forum.xda-developers.com/showthread.php?t=2708719
I am therefore tempted to adopt the advice here ...
http://www.droidreport.com/how-inst...ion-remix-rom-samsung-galaxy-s3-gt-i9300-5227
namely of formatting the system through the “mounts and storage” submenu in addition to the basic 'spring clean'.
If I do so, will I need to reload the EFS backed-up on to my computer, or will the format not affect the existing EFS partition?
2) I have read that changing the kernel to the Omirom i9300 kernal, shown here, improves performance.
http://boeffla.df-kunde.de/sgs3/boeffla-kernel-omni/omni11_download/Series 2.x/2.2/
Do I wait until after installing RR?
There are two versions one with and one without checksum. Do I need the checksum version if I am flashing it after installing RR?
Click to expand...
Click to collapse
You are in wrong forum bro ask your queries here link
I do not have enough points to access a development forum ;
This is only my second post and I am therefore restricted to posting it on a related Q&A forum ... pity ;I did note all the flow seems to be there.
hai dev i have bug
proxysensor always on if phone lock
thanxs ..
this rom awsme
Sent from my C2105 using XDA Premium HD app
A really excellent ROM
Further to my post above, I migrated from 4.3 stock to RR yesterday.
I used my ext SD card as one of my backups and to flash the ROM, light GAPP & subsequently kernel.
The only minor issue I had was not related to the ROM but the need to point Titanium Pro to the backup folder on the ext SD to recover my WIFI settings. In common with others, Google does not restore my WIFI settings, which may be an issue relating to my European location.
I especially like the folders.
koplax antiek said:
hai dev i have bug
proxysensor always on if phone lock
thanxs ..
this rom awsme
Sent from my C2105 using XDA Premium HD app
Click to expand...
Click to collapse
You need to turn of active notification , i dont remember proper settings name but look into it
Updating
It was a pleasant surprise to see an update in Notification this morning (GMT +3). I downloaded it on my S3, I must admit I then cheated a little by connecting to my laptop to move the update from the download folder to the root of my ext SD. Then followed the advice, namely to make a Nandroid backup, boot into CWM recovery, flash the update and GAPPS, wipe cache and dalvick cache (found in 'advanced') and rebooted.
A very smooth and quick process.
I have discovered that if I put the device on charge the installation/reboot seems to be quicker too. Whether it is in fact quicker, remains to be seen.
Now where did I put that 'changelog' to discover what the update adds? ;
add:
Brilliant. The change log is in settings ;
unmounting the Ext SD card
On the Resurrection development forum this evening -- which I am not yet qualified to post on, the question was raised as to why there was no 'dismount button' for the Ext SD card on RR.
A quick Google of KitKat and Ext SD Cards draws attention to the fact that Google does not support Ext SD cards aka 'expandable storage' on KitKat, preferring users store in cloud. I suspect that is a commercial decision, though the reason given is security.
I commented in earlier posts that although I could easily backup on the Ext SD using Titanium on Jelly Bean, after installing RR's KitKat based ROM, Titanium could not discover where my backup folders were without me signposting the way.
Ditto when downloading OTA the update for RR today. I used my laptop to move the Zip from the internal SD to the external SD.
This difficulty does not, however, appear to exist in CWM Recovery. In CWM Recovery, an SD card can be dismounted. See this wiki link.
http://wiki.cyanogenmod.org/w/ClockWorkMod_Instructions
one week on ...
I have put this Rom to very heavy wifi use since uploading it a week ago and the OTA update a couple of days later.
It is amazingly solid.
I have yet to break it.
After resetting the battery, it lasts much longer than it did with JB 4.3.
I think a liberal use of Greenify may be helping on that.
It is almost churlish to raise a point made on the development forum namely that when I turn off Tunein Radio app, it leaves its shadow on the lock page which I have clear with a reboot.
Having established that the Rom was happy on my S3, and knowing that Google does not support external SD cards on KK, I migrated all my files, including Titanium to the internal SD.
Ressurection Remix v 5.1.4
Hei bro, first of all, i wanna say thanks for this awesome rom. I use it for daily driver right now. But when will you update it to 5.1.4? I've see the changelog on resurrection website and on this update, they bring a lots of awesome features. Anyway, thank you!
p.s: sorry for my bad english.
Update will come soon
Sent from my C2105 using XDA Free mobile app
could u plz integrate the a radio.apk?not the spirit fm for it is not working here in our country, dont know y..
mizukage said:
could u plz integrate the a radio.apk?not the spirit fm for it is not working here in our country, dont know y..
Click to expand...
Click to collapse
FM radio is not included in official source , i will look into it what can be done
What does minor gps issues mean? Does gps work or not? Thanks
Sent from the center of the galaxy
cojocar.andrei said:
What does minor gps issues mean? Does gps work or not? Thanks
Sent from the center of the galaxy
Click to expand...
Click to collapse
True gps is not working..
It uses mobile data or wifi to find your location..
Sent from my C2104 using Tapatalk
RootLord said:
True gps is not working..
It uses mobile data or wifi to find your location..
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Then why everywhere this is marked as minor issue? It's a major issue for the ones that use navigation software. It's missleading ...
Thanks for the answer.
Any body have problem with SD card?
After installing the ROM
My SD card not shown any more
Please help
Sent from my C2105 using XDA Premium 4 mobile app
david makarove said:
Any body have problem with SD card?
After installing the ROM
My SD card not shown any more
Please help
Sent from my C2105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There is no such problem found , you can try installing with full factory wipe
Any body can test asphalt 8?
Because it didn't work for me :banghead:
Sent from my taoshan using XDA Premium 4 mobile app
I’m presenting my 3rd ported ROM MIUI6_v5.8.6 for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Turkdevs.com for the port rom,
4) Dr. Avinash for MIUI6_Boot Logo,
5) Of course, me for Repartitioning Xolo Q3000 & Porting ROM. But, I need not to Thank myself as I know U will Like the rom & press the Thank Button,
I haven't take any permissions from you guys, I'm sorry for that, but your work is all credited to you, so, please forgive me.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiuiV6_5.8.6.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install MiuiV6_5.8.6.zip
6) Don't reboot system, Wipe Cache & Dalvik Cache & Press Home button.
7) Immediately, Install the MIUI6_5.8.6_Patch.zip
8) Again, Wipe Cache & Dalvik Cache.
9) Reboot System.
10) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo. If you stuck at Boot Logo, then go to recovery & flash the rom again).
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) For full changelog, visit: http://en.miui.com/forum.php?mod=viewthread&tid=141453&highlight=5.8.6%2Bfull%2Bchangelog
Bugs:
Report, if you found any.
Download Links:
1) MIUI6_5.8.6_Rom
2) MIUI6_5.8.6_Patch
Note: For Engineer Mode, dial *#*#3646633#*#*,
All the Best, Guys
Screenshots:
MIUI6_5.8.6
Customized MIUI6
Updates:
Bug Fixes:1) Audio settings & Video fix
downloading..will post the review soon...
Very good and lag free rom...got fc on audio setting and internal storage detecting as memory card.. It seems speaker volume is low..rest all is ok..thanks for the update.
mujaid714 said:
Very good and lag free rom...got fc on audio setting and internal storage detecting as memory card.. It seems speaker volume is low..rest all is ok..thanks for the update.
Click to expand...
Click to collapse
Fix is ready to upload, check the video app & let me know, because it's fc for me.
I checked for storage fix but, both stock & port ROM have same figures for fstab. So, sorry for that, as soon as it's fixed, I will upload the patch.
Sent from HM NOTE 1W_MIUI6_5.8.6
mujaid714 said:
Very good and lag free rom...got fc on audio setting and internal storage detecting as memory card.. It seems speaker volume is low..rest all is ok..thanks for the update.
Click to expand...
Click to collapse
plz flash the Stock 007 full kitkat rom by sptools. [http://forum.xda-developers.com/q3000/orig-development/xolo-q3000-kitkat-4-4-2-007-rom-t3080902 ].....after that flash this beautiful rom .....see that ur problem solve or not
i am using this stock rom & i don't find any low sound or sd card as phone stogare problem... plz try this
sachin.r.fulzele said:
Fix is ready to upload, check the video app & let me know, because it's fc for me.
I checked for storage fix but, both stock & port ROM have same figures for fstab. So, sorry for that, as soon as it's fixed, I will upload the patch.
Sent from HM NOTE 1W_MIUI6_5.8.6
Click to expand...
Click to collapse
I didnt got any fc in video app but it cant play any video..añd waiting for ur fixes..
---------- Post added at 10:06 PM ---------- Previous post was at 10:06 PM ----------
rohitsinghpu said:
plz flash the Stock 007 full kitkat rom by sptools. [http://forum.xda-developers.com/q3000/orig-development/xolo-q3000-kitkat-4-4-2-007-rom-t3080902 ].....after that flash this beautiful rom .....see that ur problem solve or not
i am using this stock rom & i don't find any low sound or sd card as phone stogare problem... plz try this
Click to expand...
Click to collapse
Thanks bro will try this
mujaid714 said:
I didnt got any fc in video app but it cant play any video..añd waiting for ur fixes..
---------- Post added at 10:06 PM ---------- Previous post was at 10:06 PM ----------
Thanks bro will try this
Click to expand...
Click to collapse
i want to clarify one thing i am talking about the @sachin.r.fulzele g 5.7.9 miui rom,,,...till now i don't try the sachin.r.fulzele miui 5.8.6 rom
that i don't have any problem with miui 5.7.9......i will try the miui 5.8.6 rom tomorrow
"Audio settings & Video fix" link is added in bug fixes section.
Sent from HM NOTE 1W_MIUI6_5.8.6
Once again good port, everything working fine.:good::good:
audio fixed but default video app is missing, mxplayer solves but cant able to play video from gallery, not a big issue.
about mem swap, i extracted vold & sdcard bin files from MIUI5.3.31 ported by avi and replaced it. works well fr me. i hv attached a flashable fix.:angel:
Jagadish-ravi said:
Once again good port, everything working fine.:good::good:
audio fixed but default video app is missing, mxplayer solves but cant able to play video from gallery, not a big issue.
about mem swap, i extracted vold & sdcard bin files from MIUI5.3.31 ported by avi and replaced it. works well fr me. i hv attached a flashable fix.:angel:
Click to expand...
Click to collapse
Will it work for miui 5.8
Thank you @sachin.r.fulzele for the beautiful rom update.
I just want to know:
Does following problem from previous version (Ported by Avi) are resolved in this version:
1. Auto theme Changing
2. Fonts from themes were not working
3. Ram showing 1 Gb instead of 2Gb. ( I know its just showing 1gb but have power of 2gb)
mujaid714 said:
Will it work for miui 5.8
Click to expand...
Click to collapse
Yes it is working fine
Flashed.. Bricked ... Recovered..
I think it took out my final boot .. I also flashed couple of roms after this.. Still stuck on final boot setup..
Thought of changing the recovery.. Still no good.. Sp flash tool helps a lot..
Another thing i noticed was the Turkish language with many fcs .. I am a big miui fan .. Still wait for avi sir n our team to make it a more stable
Cheers.. !
bug
It's not major bug
I found it in-call ui
[email protected] said:
Thank you @sachin.r.fulzele for the beautiful rom update.
I just want to know:
Does following problem from previous version (Ported by Avi) are resolved in this version:
1. Auto theme Changing
2. Fonts from themes were not working
3. Ram showing 1 Gb instead of 2Gb. ( I know its just showing 1gb but have power of 2gb)
Click to expand...
Click to collapse
Everything is working fine
Aftab Memon said:
Flashed.. Bricked ... Recovered..
I think it took out my final boot .. I also flashed couple of roms after this.. Still stuck on final boot setup..
Thought of changing the recovery.. Still no good.. Sp flash tool helps a lot..
Another thing i noticed was the Turkish language with many fcs .. I am a big miui fan .. Still wait for avi sir n our team to make it a more stable
Cheers.. !
Click to expand...
Click to collapse
ROM is already stable & nearly bugless, don't spread rumors, read instructions first & then go for it.
Vinay Patani said:
It's not major bug
I found it in-call ui
Click to expand...
Click to collapse
How did u get this? R u using some other language as default?
welcome guys,
IN THIS ROM PROVIDED BY ME. I HAVE NOT DEVELOPED ANY APP. ALL APPS ARE DEVELOPED BY MIUI TEAM,ITS PORTED FROM MI REDMI NOTE, I,DO GIVE FULL CREDITS TO MIUI DEV TEAM
I HV TRIED TO GIVE U ALL BEST OF MIUI 7
WORKING: working everyhing
BUG: sensor bug, but it can be used as daily driver if u wish
INSIDE THIS ROM :- all miui features
pre rooted
HOW TO INSTALL:-
1-- download rom
2--reboot to recovery(flash it throw philiz recovery)
3-- wipe and format opions
4-- factory reset (will take some time)
5--install zip/choose zip from sd card1/select miui_7_canvas_xpress_2.zip
5-- flasing may take upto 5 minues...after this now flash Patch_Miui 7.zip(this will also take some time)
6--now reboot
6-- 5 to 10 min in first boot.will appear like bootloop but wait patiently and it will open.
7--on welcome screen config it as u want then on home screen swipe left and open swapper app
8--in app tap on (choose swap directory) then just tap on select and then tap on save nd it will ask super su permission, grant it,it will now creat a swap file on ur internal sd card, it may take 5 minutes to create it,
9--its all done
ROM DETAILS:-
Miui=miui7 global 5.9.16 beta
kernal version :- 3.4367
android os :- (4.4.2)
SOURCE OF DOWNLOAD:-
ROM:-
https://drive.google.com/file/d/0B9tb9NtbHirvRUQzQlNQOHJiX0U/view?usp=sharing
PATCH_MIUI 7
https://drive.google.com/file/d/0B9tb9NtbHirvOGVEVkpELW0waVk/view?usp=sharing
if u hv locked bootloader n official 5.1 and U want miui then u can falsh above using sp flah tools and later flash miui from recovery
FLASHABLE FILES
https://drive.google.com/file/d/0B9tb9NtbHirvQmhvWmdqUGNJLVE/view?usp=sharing
IF HAVING ANY PROBLEM
just reply to my post to ask any question.
keep on checking regularly for rom updates
hit thanks for hardwork
XDA:DevDB Information
MIUI 7, ROM for all devices (see above for details)
Contributors
Prince_Abhay, MIUI TEAM
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: MIUI
Version Information
Status: Testing
Created 2015-09-29
Last Updated 2015-09-29
sorry for the truble
its wifi fix
https://cdn.fbsbx.com/hphotos-xaf1/...4a3e17d7fc6a0fe783c6cb9227d0&oe=561199EE&dl=1
flash it from recovery
@OP, thanks for your hard work. please one help, can not take full backup using phil touch. data mount error always.
oh thats a serious prob. u cant take backup of ur apps n data from recovery bkz ur data pariion is curupt, u can take backup of data n apps using titanium backup app, rest u have to to take backup using cuosom backup option from recovery, there u hv to remove tick from data n then take backup
9 out of 6 Sensors are not working including GPS
battery drains too fast.
Menus Lags So much
Heating below the camera.
please fix these errors i want to use miui
going back to hiveos roms by mortal is smooth
path error status 7
aravpathak said:
9 out of 6 Sensors are not working including GPS
battery drains too fast.
Menus Lags So much
Heating below the camera.
please fix these errors i want to use miui
going back to hiveos roms by mortal is smooth
Click to expand...
Click to collapse
thanx for the info, sensors are fixed (only 2 left to fix), menu lags bkz of its background services wich will run till device is fully synchronise then it will not lag n yes. dont forget to activate swapper,Patch will be release soon
@op , I have sucessfully installed miui 7. First I have installed stock kitkat. then phil touch. no problem to backup and format with stock kitkat and phil touch. then installed also miui 7 and patch. thank you. I think phil touch have a problem with lolipop.
Nice Good job.....
wifi not connecting
does any one facing problem with wifi connectivity please share i was facing wifi conectivity prob its status show like below attachment its not at all connecting
does anyone help me to solve wifi connecting issue
chaitumtx said:
does anyone help me to solve wifi connecting issue
Click to expand...
Click to collapse
sorry for the truble
its wifi fix
flash it from recovery https://cdn.fbsbx.com/hphotos-xaf1/...4a3e17d7fc6a0fe783c6cb9227d0&oe=561199EE&dl=1
thank you nice work and also can u provide me settings for contacts because i cannot able to merge duplicate contacts
hey bro problem with sync its not syncing everything bro if i opened in web some of call logs,sms,records only syncing
i was unable to download wifi fix can u re-upload file...
Bro please re upload wifi fix. link expired
Wifi fix can not download due to 0kb lenght
Working: wifi, 3g, phone.
Not working: bluetooth, camera, gps
Download
Marshamellow mlais m9, phone don't work.
hassed said:
Marshamellow mlais m9, phone don't work.
Click to expand...
Click to collapse
Read something bout the phone when in a call it shuts the app. There is however a newer version maybe that one doesn't have that bug. Further wifi and playstore should work.
During a call , says no connection error . IMEI - not damaged SIM number defines. WIFI works. Camera does not work. GPS does not work. bluetooth does not work. Play Store is working.
give the new version.
sorry for my english
hassed said:
During a call , says no connection error . IMEI - not damaged SIM number defines. WIFI works. Camera does not work. GPS does not work. bluetooth does not work. Play Store is working.
give the new version.
sorry for my english
Click to expand...
Click to collapse
did you restore the imei number under /data/nvram/imei..../mdb?
mark-1978 said:
did you restore the imei number under /data/nvram/imei..../mdb?
Click to expand...
Click to collapse
Yes restored , through a combination of IMEI * # 06 # shows , but call anyway possible. You continue to try to port Marshmallow Mlais M9?
hassed said:
Yes restored , through a combination of IMEI * # 06 # shows , but call anyway possible. You continue to try to port Marshmallow Mlais M9?
Click to expand...
Click to collapse
It's from a russian site, as they continiu i can continu.
Marshmallow from april 2016.
mark-1978 said:
It's from a russian site, as they continiu i can continu.
Click to expand...
Click to collapse
source?
dip1991 said:
source?
Click to expand...
Click to collapse
llll
mark-1978 said:
http://4pda.ru/forum/index.php?showtopic=684988&st=2560#entry46724696 llll
Click to expand...
Click to collapse
ur port rom???
This link for source.
This link for ported roms.
Also contains a working bluetooth, camera and wifi version with gapps installed, but the screen might flicker a bit sometimes which goes away after a while. So CM13 with working bluetooth and camera for Mlais M9 thx to the russian 4pda.ru site.
mark-1978 said:
This link for source.
This link for ported roms.
Also contains a working bluetooth, camera and wifi version with gapps installed, but the screen might flicker a bit sometimes which goes away after a while. So CM13 with working bluetooth and camera for Mlais M9 thx to the russian 4pda.ru site.
Click to expand...
Click to collapse
Have problems with both storage.Cant enter internal storage and cant install anything from external
Andryaka said:
Have problems with both storage.Cant enter internal storage and cant install anything from external
Click to expand...
Click to collapse
Internal storage should work. External sd card is a bug. On my mlais phone i can install apps on the internal storage. Don't know how to fix external sd card though. It's not rooted either. If you want to install from external sd card, i would mail the apk to myself, open it from the phone and install it from internal storage.
mark-1978 said:
Internal storage should work. External sd card is a bug. On my mlais phone i can install apps on the internal storage. Don't know how to fix external sd card though. It's not rooted either. If you want to install from external sd card, i would mail the apk to myself, open it from the phone and install it from internal storage.
Click to expand...
Click to collapse
Internal dont work too,dont know why.I have used u r last TWRP from this thread.Dont like twrp too much,but now i hate it because cant flash my stock because drivers for it dont work on windows 10
P.S. Minimal os flashed by that recovery have a bootloop.
Flahsed RR rom have the same bug with internal storage.think it recovery bug
P.S sry for my english.
Fixed storage cm13 thx to rhiad khan.
Reuploaded a version of RR with modded boot.img for internal sd card to become accessible.
Further, standard in TWRP, system is unmounted before a new flash. Keep it unmounted before flashing a new rom. You can also unmount data or even cache before flashing a new rom.
Update Marshmallow bug fixes and rooted.
Bug fixes:
Crash some menu items (apparently skewed gathered at fire855 )
If you turn off BT correct error is eliminated through the curtain without errors (as a solid )
After a while it stops working AutoTURN
VPN settings in crashes, but boot'e Permanent Position (via third party software will probably work )
Youtube 360p treated Fix, who threw Kommandoz
not work to switch 3G / 2G
Error com.adnroid . phone , if you get stuck on the tube end
Sometimes flickering screen ( as solid an flickered under test a new build )
Update: working sdcards Android Marshmallow 6.01
New marshmallow version 1.2 for Mlais M9.
use "link2sd' to change the standard installation sdcard to the 4.12GB sdcard. To avoid the becoming black of the screen, you can try to disable gpu acceleration in settings/developer settings.
* link2sd doesn't seem to work for the two internal sdcards.
Marshmallow rom with root support.