Modified Firmware Without The Red Developer's WarningPlease make sure you understand EVERY STEP before trying to flash a new firmware. I AM NOT RESPONSIBLE FOR ANYTHING GOING WRONG OR ACCIDENTAL BRICKS!
This firmware is WITHOUT the development warning overlay:
This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
This is the custom version from Vomer's Guid where you can also find a step by step instructions on how to flash a new firmware.
The only change I made was modifying the HBOOT to remove the red warning.
*** This will NOT wipe your SD partition ***
But please make a back up before flashing for safety.
Requirements for flashing: S-OFF
If you do not know how to flash a Firmware or it is your first time, follow Vomer's Guide for detailed instructions.
If you do know what you are doing, here is a reminder of the commands:
Code:
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip C:\adb\Firmware_File_Name.zip
fastboot flash zip C:\adb\Firmware_File_Name.zip (repeat)
fastboot reboot
DOWNLOAD LINKS: (Show appreciation and hit the THANKS below)
The Latest Files moved HERE
fw_6.09.401.10_custom_nored
Credits:
@vomer for his amazing guide and the custom firmware.
Great will try thanks...........
everything is ok. Thank you.
\\Yoshi
Lol and I did with hex steps few minutes ago. Should have checked this thread :laugh:
Hello what is the hboot version in this firmware please?
If I have a 401.5 rom, would it be better to keep that firmware or install this new one?
myheroduane said:
Hello what is the hboot version in this firmware please?
Click to expand...
Click to collapse
Hboot 1.57
danielr18 said:
If I have a 401.5 rom, would it be better to keep that firmware or install this new one?
Click to expand...
Click to collapse
Don't think it matters too much... I sometimes update FW before the new ROM comes out and sometimes the other way around.
Never had issues with either.
Hey there sir, if i already flashed Stock firmware ( 6.09.401.10) with red warning, can i just Flash this over it? Will it work?
ali-k95 said:
Hey there sir, if i already flashed Stock firmware ( 6.09.401.10) with red warning, can i just Flash this over it? Will it work?
Click to expand...
Click to collapse
Yes it works.
After flashing, still show 6.09.401.5????
HkDng said:
After flashing, still show 6.09.401.5????
Click to expand...
Click to collapse
Did you get a successful message?
Make sure you have the correct MD5, you might have a corrupt download.
Follow the flashing guide to the letter. Vomer's Guide, "SECTION 2: FIRMWARE UPGRADE"
Remember, you have to do the flashing command when in RUU mod twice. the first one is system preparation and the second actually installs the FW.
matanlevanon said:
Did you get a successful message?
Make sure you have the correct MD5, you might have a corrupt download.
Follow the flashing guide to the letter. Vomer's Guide, "SECTION 2: FIRMWARE UPGRADE"
Remember, you have to do the flashing command when in RUU mod twice. the first one is system preparation and the second actually installs the FW.
Click to expand...
Click to collapse
yes, I did as instruction in other post, flash twice ... successfully message ...
HkDng said:
yes, I did as instruction in other post, flash twice ... successfully message ...
Click to expand...
Click to collapse
Where do check for version of the firmware?
in Settings/About/Software information it shows the version that the ROM is based on. If you are using a 4.09.401.05 based ROM this is what it will show...
You can boot into bootloader and see the version at the top or do "fastboot getvar all" when in bootloader and you'll get all your phone's info.
Not working for me got a error: FAILED (status read failed (Too many links)) and it's gone into some weird mode like bootloader but say's RUU USB and my os is in red and it says os-4.09.1700.1 (6.09.401.10) What should i do? Never had this happen before
Edit:It continued flashing in bootloader and it skiped some bits in the firmware i rebooted bootloader and all is fine
This happains when the connection between computer and cell breaks. Flash it again and replace the cable with some other usb cable. may be cable problem
liam_davenport said:
Not working for me got a error: FAILED (status read failed (Too many links)) and it's gone into some weird mode like bootloader but say's RUU USB and my os is in red and it says os-4.09.1700.1 (6.09.401.10) What should i do? Never had this happen before
Edit:It continued flashing in bootloader and it skiped some bits in the firmware i rebooted bootloader and all is fine
Click to expand...
Click to collapse
Might be a USB cable problem...
Make sure you are using the HTC cable (or a good quality one) and try again.
kami2k said:
This happains when the connection between computer and cell breaks. Flash it again and replace the cable with some other usb cable. may be cable problem
Click to expand...
Click to collapse
matanlevanon said:
Might be a USB cable problem...
Make sure you are using the HTC cable (or a good quality one) and try again.
Click to expand...
Click to collapse
Thanks guy's and yes it's the usb port in my phone its a bit loose need to send off for repair before it breaks
is this compatible for the GPE m7 or is it just for the sense version. thanks
J73 said:
is this compatible for the GPE m7 or is it just for the sense version. thanks
Click to expand...
Click to collapse
It is the latest firmware that was released for the M7 WWE. not sure what version GPE is on but I know that I used a GPE FW before on my sense rom.
I would read about it more in the GPE forums...
Related
After flashing sense rom (walkman sense) pico freezes and automatically restarting.. :crying:
Tried flashing super_wipe.zip before flashing rom, and tried other roms too (cm11,carbon,nextgen,jaggy..!! ). The problem still persist..
How to fix this..??
Pee_kee said:
After flashing sense rom (walkman sense) pico freezes and automatically restarting.. :crying:
Tried flashing super_wipe.zip before flashing rom, and tried other roms too (cm11,carbon,nextgen,jaggy..!! ). The problem still persist..
How to fix this..??
Click to expand...
Click to collapse
some questions/ info needed
What recovery you using at the moment
Did you format everything but sdcard
Which firmware are you on / which region
anonymous-user said:
some questions/ info needed
What recovery you using at the moment
Did you format everything but sdcard
Which firmware are you on / which region
Click to expand...
Click to collapse
recovery : Latest TWRP
formatted every thing.. flashed superwipe.zip
am in india using Walkman sense rom 5.10.
problem persist in all rom..
Pee_kee said:
recovery : Latest TWRP
formatted every thing.. flashed superwipe.zip
am in india using Walkman sense rom 5.10.
problem persist in all rom..
Click to expand...
Click to collapse
ok, well have you tried relocking your bootloader and flashing RUU package back to full clean stock? if you`ve already done that properly (not by flashing some custom stock rom through recovery) then I guess its a repair shop job.
anonymous-user said:
ok, well have you tried relocking your bootloader and flashing RUU package back to full clean stock? if you`ve already done that properly (not by flashing some custom stock rom through recovery) then I guess its a repair shop job.
Click to expand...
Click to collapse
I didn't do that /*relocking your bootloader and flashing RUU package*/..
well, let me seek tutorials to do that.
Any tutorial with less risk than this one.? http://forum.xda-developers.com/showthread.php?t=1500165
Pee_kee said:
Any tutorial with less risk than this one.? http://forum.xda-developers.com/showthread.php?t=1500165
Click to expand...
Click to collapse
1st you need to find your firmware version, boot into bootloader and the info is there and then download the appropriate RUU package as these are region specific, I can tell you how to do it without much hassle so long as you have adb setup on your comp already and the unlock token or application used to unlock your bootloader.......
you can find all the RUU packages for pico here : http://www.androidruu.com/?developer=Pico
tell me which 1 it is and I`ll extract the files needed to be able to update it via sdcard
anonymous-user said:
1st you need to find your firmware version, boot into bootloader and the info is there and then download the appropriate RUU package as these are region specific, I can tell you how to do it without much hassle so long as you have adb setup on your comp already and the unlock token or application used to unlock your bootloader.......
you can find all the RUU packages for pico here : http://www.androidruu.com/?developer=Pico
tell me which 1 it is and I`ll extract the files needed to be able to update it via sdcard
Click to expand...
Click to collapse
This is RUU_Pico_hTC_Asia_India_1.31.720.3_Radio_10.35d.80.09H_1.11.82.17_release_230683_signed.exe
Pee_kee said:
This is RUU_Pico_hTC_Asia_India_1.31.720.3_Radio_10.35d.80.09H_1.11.82.17_release_230683_signed.exe
Click to expand...
Click to collapse
ok I have the specific RUU package for your region downloaded and I`ve extracted the rom.zip from the package, now I`m in the process of uploading the file for you. So you have adb working? the unlock token you used to unlock your bootloader or utility that will do the same job?
Ok here`s the full procedure for you
Download the the full firmware stock rom from here: http://www.freefilehosting.net/pj03img press "DOWNLAD THIS FILE" then enter the captcha, the file name is "PJ03IMG" do not modify it in anyway.
Copy the PJ03IMG file to the root of your sdcard (not in any folder)
Boot to Bootloader and connect usb to phone and computer, open CMD on windows or Terminal on Linux and type the following:
Code:
fastboot oem lock
you should now see on the phone that your bootloader has been "re-locked" if you see that you can now press the power button on phone to change to bootloader (mode see attached pic 1 at the bottom), now the phone will look for files on your sdcard (see pic 2 attached at the bottom)
at this point it should find the PJ03IMG file and a loading bar will appear on the right hand side, be patient it takes about 30 secs to load it. When its finished it will ask if you want to flash the update or not, use the volume keys to move the selector to yes and press the power button and the process will begin to totally reflash your phone back to stock once done it will ask you to reboot phone, voila done. the first boot will take some time as its a fresh install so give it afew minutes to get to homescreen, assuming all is well and phone is working as it should we can get a recovery back after unlocking the bootloader.
anonymous-user said:
will ask if you want to flash the update or not, use the volume keys to move the selector to yes and press the power button and the process will begin to totally reflash your phone back to stock
Click to expand...
Click to collapse
how pico do that without stock rom file.?! Where i should should keep rom.zip file.? how can i extract it from RUU_Pico_hTC_Asia_India_1.31.720.3_Radio_10.35d.80 .09H_1.11.82.17_release_230683_signed.exe..??
Modified Firmware Without The Red Developer's Warning For M9Please make sure you understand EVERY STEP before trying to flash a new firmware. I AM NOT RESPONSIBLE FOR ANYTHING GOING WRONG OR ACCIDENTAL BRICKS!
This firmware is WITHOUT the development warning overlay:
This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
This is the custom version firmware with modified HBOOT to remove the red warning.
*** This will NOT wipe your SD partition ***
But please make a back up before flashing for safety.
Requirements for flashing: S-OFF
If you do not know how to flash a Firmware or it is your first time, follow the Step-By-Step in @Sneakyghost's page.
If you do know what you are doing, here is a reminder of the commands:
In Download Mode:
Code:
fastboot oem rebootRUU
Followed by:
Code:
fastboot flash zip C:\adb\Firmware_File_Name.zip
(replace "Firmware_xx.zip" with the name of your zip)
Finally:
Code:
fastboot reboot-bootloader
**If you have any ERROR or FAIL see THIS helpful post
DOWNLOAD LINKS: (Show appreciation and hit the THANKS below)
Latest:
M9_3.35.401.12_NoWipe_NoRed (International)
M9_3.35.617.12_NoWipe_NoRed (Developers/Unlocked)
Older Versions:
M9_2.10.401.1_NoWipe_NoRed (International)
M9_2.8.617.4_NoWipe_NoRed (Developers/Unlocked)
M9_2.7.401.1_NoWipe_NoRed (International)
M9_1.40.401.8_NoWipe_NoRed (International)
M9_1.40.401.5_NoWipe_NoRed (International)
M9_1.32.401.17_NoWipe_NoRed (International)
M9_1.32.617.30_NoWipe_NoRed (Developers/Unlocked)
Other Variants (not created by me):
M9_TMO_1.32.531.33_NoWipe_NoRed - Created by @ThePhoneGeek
HTC M7 Firmware without Red Warning
Credits:
@Sneakyghost for the firmware collection.
Which version of the M9 is this for? I have a developer edition.
Need one for T-Mobile US version :fingers-crossed:
x3reme85 said:
Need one for T-Mobile US version :fingers-crossed:
Click to expand...
Click to collapse
I completed S-off using Sunshine. I then completed Super CID. I proceeding to flash this to my TMOUS USA M9. It worked like a charm.
Shokouhi
theloneranger08 said:
Which version of the M9 is this for? I have a developer edition.
Click to expand...
Click to collapse
If you're S-Off and superCID you can flash it. But if your firmware is the latest developer one (1.32.617.30) there is no need, it's the same. Just wait for next version.
Sent from HTC One M9 | ARHD
matanlevanon Thanks for posting this by the way. Cheers!
matanlevanon said:
modified firmware without the red developer's warning for m9please make sure you understand every step before trying to flash a new firmware. I am not responsible for anything going wrong or accidental bricks!
This firmware is without the development warning overlay:
this build is for
development purposes only
do not distribute outside of htc
without htc's written permission.
Failure to comply may
lead to legal action.
this is the custom version firmware with modified hboot to remove the red warning.
*** this will not wipe your sd partition ***
but please make a back up before flashing for safety.
Requirements for flashing: s-off
if you do not know how to flash a firmware or it is your first time, follow the step-by-step in @sneakyghost's page.
If you do know what you are doing, here is a reminder of the commands:
in download mode:
Code:
fastboot oem rebootruu
followed by:
Code:
fastboot flash zip c:\adb\firmware_file_name.zip
(replace "firmware_xx.zip" with the name of your zip)
finally:
Code:
fastboot reboot-bootloader
download links: (show appreciation and hit the thanks below)
latest:
m9_1.32.401.17_nowipe_nored
older versions:
htc m7 firmware without red warning
credits:
@sneakyghost for the firmware collection.
Click to expand...
Click to collapse
thank you,thanks for your hard working
Super thank you, works like a charm
Is this newer and has improvements to that of T-Mobile US latest update.
HTC One M9
fmedrano1977 said:
Is this newer and has improvements to that of T-Mobile US latest update.
HTC One M9
Click to expand...
Click to collapse
This is WWE firmware I.e Europe so for best signal ect, tmo will work best for your device, unless you are using a rom based on .17 then is recommended to match firm to rom base and latest tmo is .33 right? That dropped before this so I'm guessing it got the latest fixes ect first
Is this the same as this existing thread?
http://forum.xda-developers.com/one-m9/development/ota-1-32-401-15-firmware-noredtext-t3072571
Tikerz said:
Is this the same as this existing thread?
http://forum.xda-developers.com/one-m9/development/ota-1-32-401-15-firmware-noredtext-t3072571
Click to expand...
Click to collapse
Unless I missed something, this thread has complete firmware with the red letter warning removed while the other thread has firmware with the red letter warning included. There is a separate flashable to remove the red letters there, but these are premade with the warning removed. So, the threads are different as far as I can tell.
Warning message
Hi
I have htc m9 deveoper edition wit latest firmware 1.32.617.30
Is there any link for that to remove red warning meesage?
Thank you
senbros said:
Hi
I have htc m9 deveoper edition wit latest firmware 1.32.617.30
Is there any link for that to remove red warning meesage?
Thank you
Click to expand...
Click to collapse
Not that I know of...
Sent from HTC One M9 | ARHD
senbros said:
Hi
I have htc m9 deveoper edition wit latest firmware 1.32.617.30
Is there any link for that to remove red warning meesage?
Thank you
Click to expand...
Click to collapse
yes it's posted here > http://forum.xda-developers.com/showpost.php?p=60364582&postcount=118
senbros said:
Hi
I have htc m9 deveoper edition wit latest firmware 1.32.617.30
Is there any link for that to remove red warning meesage?
Thank you
Click to expand...
Click to collapse
I just creatted one... check out first post
Erm, i have a problem with the new 1.40 firmware... flashed as suggested, all went fine.. succeeded 100%. However, when i open my dotview cover, the phone reboots... every time... any thoughts / help?? thank you..
EDIT: I have gone back to the 1.32 firmware..
Sulphy said:
Erm, i have a problem with the new 1.40 firmware... flashed as suggested, all went fine.. succeeded 100%. However, when i open my dotview cover, the phone reboots... every time... any thoughts / help?? thank you..
EDIT: I have gone back to the 1.32 firmware..
Click to expand...
Click to collapse
If the rom is not based on 1.40 fw you get reboots. It all has to be the same.
thanks for the firmware!
one quick question, i tried to flash this as i always did on my m8 via external sd in bootloader, i.e naming to 0PJAIMG.zip and putting it on my external sd, however bootloader didn't pick it up, my sd is exFAT at the moment
exocetdj said:
thanks for the firmware!
one quick question, i tried to flash this as i always did on my m8 via external sd in bootloader, i.e naming to 0PJAIMG.zip and putting it on my external sd, however bootloader didn't pick it up, my sd is exFAT at the moment
Click to expand...
Click to collapse
depends on the file system i think
use internal storage. should work
Hi guys,
My phone now is on LeeDroid custom ROM (Build 1.03.401.6.9_g CL923215)
What are the steps to return the htc u11 to stock please?
The original software number of my phone is: 1.11.400.4
EDIT: I went to: https://forum.xda-developers.com/showpost.php?p=72425224&postcount=5
& downloaded stock recovery & nandroid TWRP backup (for 1.11.400.4).
However, I couldnt flash that nandroid TWRP from TWRP recovery.
Long story short, I just got the phone today, I made a big mistake by not inserting the simcard in & testing to see if the phone working or not.
So, I went straight through the process of unlocking bootloader, installing TWRP, Rooting, Installing custom ROM without making a nandroid backup.
For all that, the phone did not recognize the sim cards (tried both my sim & my gf's sim. not working)
The store will take back the phone as long as I return it to stock.
Thanks for your help!!!
dsymbol said:
Hi guys,
What's the process of returning the htc u11 to stock please?
Googling doesn't give me much result.
Long story short but I just got the phone today, I made a big mistake by not inserting the simcard in & testing to see if the phone working or not.
So, I went straight through the process of unlocking bootloader, installing TWRP, Rooting, Installing custom ROM without making a nandroid backup.
For all that, the phone did not recognize the sim cards (tried both my sim & my gf's sim. not working)
The store will take back the phone as long as I return it to stock.
Thanks for your help!!!
Click to expand...
Click to collapse
You'll need to download the stock rom for your verison (ruu). Hopefully one is available. Check the guide section here.
purple patch said:
You'll need to download the stock rom for your verison (ruu). Hopefully one is available. Check the guide section here.
Click to expand...
Click to collapse
I've downloaded stock recovery & nandroid TWRP backup of my stock ROM now.
What are the steps to revert the phone to stock please?
Thanks
dsymbol said:
I've downloaded stock recovery & nandroid TWRP backup of my stock ROM now.
What are the steps to revert the phone to stock please?
Thanks
Click to expand...
Click to collapse
Restore the TWRP backup, check everything is working, then flash stock recovery if you need to. The stock Nandroid should include recovery asfaik. I'm more of a trial and error guy lol. Read guide pages to know for certain, check HTC 10 guides, same steps.
purple patch said:
Restore the TWRP backup, check everything is working, then flash stock recovery if you need to. The stock Nandroid should include recovery asfaik.
Click to expand...
Click to collapse
ok so I downloaded TWRP_Backup_Untouched_System_Image_+_Boot_1.11.400.4_OCEAN_DUGL_with_recovery.
1. Transfering the TWRP backup to the phone's storage
2. Flashing that backup just like flashing the custom ROM (it says Invalid zip file format. Error ect...) Please help
3. Flashing the recovery just like flashing the TWRP using adb commands
4. Lock the bootloader? I don't know how to do this.
Please advice
Thanks purple patch
dsymbol said:
ok so I downloaded TWRP_Backup_Untouched_System_Image_+_Boot_1.11.400.4_OCEAN_DUGL_with_recovery.
1. Transfering the TWRP backup to the phone's storage
2. Flashing that backup just like flashing the custom ROM (it says Invalid zip file format. Error ect...) Please help
3. Flashing the recovery just like flashing the TWRP using adb commands
4. Lock the bootloader? I don't know how to do this.
Please advice
Thanks purple patch
Click to expand...
Click to collapse
Get the one from here and follow instructions. That's what the thread is for. https://forum.xda-developers.com/u11/how-to/collection-htcu-u11-ruu-firmware-t3612048. Sorry i don't have time to do the leg work for you (i'm out atm), but it's all there.
download this Official RRU firmware and install it https://forum.xda-developers.com/u11/how-to/unlocked-htc-u11-software-update-6-19-t3624814
Use the ruu, you might need the HTC drivers but in the future never not make a backup, 15 mins could save u a major headache
AllGamer said:
download this Official RRU firmware and install it https://forum.xda-developers.com/u11/how-to/unlocked-htc-u11-software-update-6-19-t3624814
Click to expand...
Click to collapse
I'm downloading it now & will report back very soon.
Thanks for the tip AllGamer!!!
AllGamer said:
download this Official RRU firmware and install it https://forum.xda-developers.com/u11/how-to/unlocked-htc-u11-software-update-6-19-t3624814
Click to expand...
Click to collapse
Finished downloading & now I got an ERROR installation, something like a wrong ROM, probably because I'm currently on LeeDroid custom ROM (Build 1.03.401.6.9_g CL923215)
Please advice
Thank you
dsymbol said:
Finished downloading & now I got an ERROR installation, something like a wrong ROM, probably because I'm currently on LeeDroid custom ROM (Build 1.03.401.6.9_g CL923215)
Please advice
Thank you
Click to expand...
Click to collapse
Your going to need a full signed RUU zip matching your original firmware and CID buddy.
Based on your original build number its an Indian dual SIM device so here is the ruu:
https://www.androidfilehost.com/?fid=817550096634780026
1. Rename it to 2PZCIMG.zip
2. Lock your bootloader
3. Drop the zip on your external SD card.
3. Boot to download mode, at that point you will be prompted to flash... Accept... Profit.
If you don't have an external SD.
1. Lock your bootloader.
2. Boot to download mode.
3. Open a cmd window and run the below commands.
fastboot orm rebootRUU (hit enter)
fastboot flash zip (drag the zip into the cmd window then hit enter)
dsymbol said:
Finished downloading & now I got an ERROR installation, something like a wrong ROM, probably because I'm currently on LeeDroid custom ROM (Build 1.03.401.6.9_g CL923215)
Please advice
Thank you
Click to expand...
Click to collapse
On the PC side, what was the exact error message?
you can ignore the warning from the phone side.
I had a similar issue the other day, but then I was able to run the RUU upgrade to rest my phone back to stock as I had to ship it back for a refund, to get the new Red ones
When I ran the RUU thing it wouldn't detect the phone, did a few things, and then it was finally able to detect the phone.
and when it started updating the Boot image it hung for a long while, I had to restart the phone back into download mode, then run the RUU again, and it was able to continue from there.
AllGamer said:
On the PC side, what was the exact error message?
you can ignore the warning from the phone side.
I had a similar issue the other day, but then I was able to run the RUU upgrade to rest my phone back to stock as I had to ship it back for a refund, to get the new Red ones
When I ran the RUU thing it wouldn't detect the phone, did a few things, and then it was finally able to detect the phone.
and when it started updating the Boot image it hung for a long while, I had to restart the phone back into download mode, then run the RUU again, and it was able to continue from there.
Click to expand...
Click to collapse
It says: ERROR [130]: MODEL ID ERROR
The ROM Update Utility cannot update your Android phone.
Please get the correct ROM Update Utility and try again.
The previous screen says:
Verifying that you want to update
Image version 1.03.401.6
to
Image version 1.11.617.4
LeeDroid said:
Your going to need a full signed RUU zip matching your original firmware and CID buddy.
Based on your original build number its an Indian dual SIM device so here is the ruu:
https://www.androidfilehost.com/?fid=817550096634780026
1. Rename it to 2PZCIMG.zip
2. Lock your bootloader
3. Drop the zip on your external SD card.
3. Boot to download mode, at that point you will be prompted to flash... Accept... Profit.
Click to expand...
Click to collapse
I'm on it now & will report back!
Thank you Sir for joining the party. I have hope now
dsymbol said:
I'm on it now & will report back!
Thank you Sir for joining the party. I have hope now
Click to expand...
Click to collapse
Added an extra step incase you don't have an external sd
dsymbol said:
It says: ERROR [130]: MODEL ID ERROR
The ROM Update Utility cannot update your Android phone.
Please get the correct ROM Update Utility and try again.
The previous screen says:
Verifying that you want to update
Image version 1.03.401.6
to
Image version 1.11.617.4
Click to expand...
Click to collapse
The 1.03.401.6 may be European software. You will need the RUU for your exact phone model from: http://www.htc.com/us/support/updates.aspx
or https://forum.xda-developers.com/u1...u-firmware-t3612048/post72425227#post72425227
michaelbsheldon said:
The 1.03.401.6 may be European software. You will need the RUU for your exact phone model from: http://www.htc.com/us/support/updates.aspx
or https://forum.xda-developers.com/u1...u-firmware-t3612048/post72425227#post72425227
Click to expand...
Click to collapse
I have linked the correct ruu in my post above as per the original firmware mentioned in the op
The correct build is 1.11.400.4
LeeDroid said:
I have linked the correct ruu in my post above as per the original firmware mentioned in the op
The correct build is 1.11.400.4
Click to expand...
Click to collapse
I have the ext. sdcard ready.
I have a question about locking the bootloader please
To lock the bootloader, I have to do this? (found instruction from google)
adb reboot bootloader
& type in 1 of these commands & stop there if it works?
fastboot oem lock
fastboot flashing lock
fastboot oem relock
Please advice
dsymbol said:
I have the ext. sdcard ready.
I have a question about locking the bootloader please
To lock the bootloader, I have to do this? (found instruction from google)
adb reboot bootloader
& type in 1 of these commands & stop there if it works?
fastboot oem lock
fastboot flashing lock
fastboot oem relock
Please advice
Click to expand...
Click to collapse
adb reboot download
fastboot oem lock
LeeDroid said:
adb reboot download
fastboot oem lock
Click to expand...
Click to collapse
Confirmation number: 5G354245BV234401U
Unbrick tool by One-Team - EypCnn
First: This tool seems to be from EypCnn, One-Team. All credits to them!
EDIT2: I no longer own this device, so i will leave this thread here for people to use. But don't expect any direct support from me .
What can this tool do?:
Restore phone to Stock(International) Firmware (S048) Marshmallow (Locked & Unlocked bootloader)
Fix Lost or bad Signal / IMEI any software Problem
For who does this work?
Pretty much any Lenovo P2 Variant (Chinese and International)
Phones which can access bootloader(you have to boot into it)
Works on Locked & Unlocked Bootloader
Installation aka. Flashing-Steps
Put your phone into bootloader (which is also fastboot) mode.
Download the folder and unzip it.
Connect your phone to your pc.
Go into the unzipped folder and open "flashall - stock reco.bat"
Wait, for the process to end, your phone will reboot on its own.! A stock lenovo bootlogo will show up !
You can disconnect your phone cable from pc and plug into a wall charger, just to be safe. Once the lockscreen is showing up, you're done.
If you want to flash Custom Roms:
look below:
WHEN MOVING TO CUSTOM ROMS NOW:
1. Boot to twrp. (Make sure it is pietwrp from telegram or the official 3.2.3 or later version)
2. Select WIPE menu option
3. Select data partition
4. Change file format to f2fs or anyother.
5. Go back to Start Menu of TWRP, choose Reboot Menu Option
6.Reboot to Recovery
7. Repeat Steps 2 and 3
8. This time select EXT4 when changing file format
9. Do Step 5 and 6
10. Wipe System,Cache and Dalvik-Cache partitions
( for older twrp versions: 10.1 If you're on official twrp 3.2.3 or lower, you have to flash pietwrp or latest twrp now !)
11. Flash your Custom Rom, Gapps (optional) and latest Magisk(optional)
12. Wipe Cache and Dalvik-Cache
13. Reboot. First Boot might take a few minutes but never longer than 7minutes.
If it takes longer, you're encounter a so called bootloop.
Comment hear if that happens, containing information on your twrp-version, rom, gapps, magisk and mods(if present) you're using.
When you corrupt your internal Storage or geht TWRP Error 1001, Error 7:
1. Repeat steps 2-6
2. Repeat steps 7-8
Download(Official Link)
2nd Link(reuploaded because some couldn't download it from androidfilehost): https://drive.google.com/open?id=1wUOZiTwW8mo0IheAGONyj9-QnjimnY2M
I will help if questions arise.
Credits to One-Team & EypCnn.
Thanks a lot. You literally saved my life!
Works like Magic
Thanks a lot for saving my ass . simplest way to downgrade to mm too. Thanks again
Wait.... downgrade to MM? Does this mean you can regain your signal or did @krishnakoonala get it wrong?
I have a spare P2 lying around that I never used because the IMEI got corrupted and I couldn't flash the bootloader files since I was unlocked.
I assume this wouldn't solve my issue?
eried1 said:
Wait.... downgrade to MM? Does this mean you can regain your signal or did @krishnakoonala get it wrong?
I have a spare P2 lying around that I never used because the IMEI got corrupted and I couldn't flash the bootloader files since I was unlocked.
I assume this wouldn't solve my issue?
Click to expand...
Click to collapse
My p2 was bricked and , stuck in boot loop. I followed the above instructions, 10 mins into it , it booted with mm version, the same version when i bought and booted for 1st time. It was like a new phone to me.
So i assume if one has upgraded to noughat and want to downgrade but is worried he might brick his device, one can take a back up and try this tool. It works flawless.
No harm in trying this one if ur p2 can boot up mate. Give it a shot. Good luck
Cheers
This tool has saved my device from multiple over a span of two years soft bricks. Can confirm it to do wonders.
eried1 said:
Wait.... downgrade to MM? Does this mean you can regain your signal or did @krishnakoonala get it wrong?
I have a spare P2 lying around that I never used because the IMEI got corrupted and I couldn't flash the bootloader files since I was unlocked.
I assume this wouldn't solve my issue?
Click to expand...
Click to collapse
THis will solve your problem , Cheers.
I tried but cannot download it - do you where to find it?
can i flash this without pc?? if yes please tell how
@sm00th4f3 bro, i wanna know, does this tool flashes full ROM including modem files etc, even on unlocked bootloader?
What is the state of bootloader after using this tool?
amansehdav said:
@sm00th4f3 bro, i wanna know, does this tool flashes full ROM including modem files etc, even on unlocked bootloader?
What is the state of bootloader after using this tool?
Click to expand...
Click to collapse
It flashed everything you have when you buy a new phone. And no, it doesn't lock your bootloader.
So you can either :
- keep using MM Stock Rom S048
- Update via ota in System like you normally would do.
- Update till latest Firmware, then flash twrp- and then Custom Rom of your Choice.
Bootloader is in the same state it was before you used this tool.
sm00th4f3 said:
It flashed everything you have when you buy a new phone. And no, it doesn't lock your bootloader.
So you can either :
- keep using MM Stock Rom S048
- Update via ota in System like you normally would do.
- Update till latest Firmware, then flash twrp- and then Custom Rom of your Choice.
Bootloader is in the same state it was before you used this tool.
Click to expand...
Click to collapse
So how does it fixes corrupted modems? it cannot be flashed on unlocked P2 right?
amansehdav said:
So how does it fixes corrupted modems? it cannot be flashed on unlocked P2 right?
Click to expand...
Click to collapse
I literally just answered it above somewhere.
(Literally in thread description)
You can flash it on unlocked bootloader or locked as well.
So many thanks for bringing up tis tool for us!
This thread should be stick as the "New user" thread is, they definitely belong together.
Download source
Thanks guys, if this works I can now revive my phone. But can someone please upload the tool to another place like google drive. From android filehost it will take an eternity to download!
HkQc said:
So many thanks for bringing up tis tool for us!
This thread should be stick as the "New user" thread is, they definitely belong together.
Click to expand...
Click to collapse
I didn't bring it up, i just linked it . All Credits belong to ONE TEAM and EypCnn.
ryd3r89 said:
Thanks guys, if this works I can now revive my phone. But can someone please upload the tool to another place like google drive. From android filehost it will take an eternity to download!
Click to expand...
Click to collapse
Link updated, Cheers
Lavesh05 said:
can i flash this without pc?? if yes please tell how
Click to expand...
Click to collapse
Nah you need a Computer for this.
no signal after using "flashall - stock reco.bat", it finished successfully, but after rom setup still no signal
GPSSlovakia said:
no signal after using "flashall - stock reco.bat", it finished successfully, but after rom setup still no signal
Click to expand...
Click to collapse
If you used some other tool for imei. You are pretty much done for.
Using this tool i can go to MM version and can upgrade to S251. However after installing twrp and flashing custom rom, it goes to bootloader
Dear members plz suggest me a best solution for this problem plz
I have a pixel 2 (walleye) and few days ago i am unlocked my bootloader and i used sum custom os like linage os on my device this yesterday I have changed my mind and i flashed a stock factory images
But i do a mistake is i am flashed a Android 8.0 factory images that is walleyes first release frimware or factory images after i am flashed my device flashing process is susessful and it is booted normally and work fine but when I am now trying to flash latest version factory images that's besed on Android 11 it is showing me sum errors on flashing time what i do now
Theracerlucky said:
Dear members plz suggest me a best solution for this problem plz
I have a pixel 2 (walleye) and few days ago i am unlocked my bootloader and i used sum custom os like linage os on my device this yesterday I have changed my mind and i flashed a stock factory images
But i do a mistake is i am flashed a Android 8.0 factory images that is walleyes first release frimware or factory images after i am flashed my device flashing process is susessful and it is booted normally and work fine but when I am now trying to flash latest version factory images that's besed on Android 11 it is showing me sum errors on flashing time what i do now
Click to expand...
Click to collapse
The error is telling you exactly what you need to do - you need to update bootloader to the required version. If you are attempting to flash the factory firmware, the required bootloader and baseband files should be included in the zip file.
V0latyle said:
The error is telling you exactly what you need to do - you need to update bootloader to the required version. If you are attempting to flash the factory firmware, the required bootloader and baseband files should be included in the zip file.
Click to expand...
Click to collapse
I don't understand properly can you brother tell me with more details plz i tried already to flash sum upper versions bootloader factory images but showing this errors continue
Theracerlucky said:
I don't understand properly can you brother tell me with more details plz i tried already to flash sum upper versions bootloader factory images but showing this errors continue
Click to expand...
Click to collapse
The screenshot you posted describes the problem. When you flash a factory image, it first checks the device bootloader and baseband versions to make sure they are up to date. If they are out of date, you get the error as shown:
Device bootloader version is 'mw8998-002.0059.00'
Update requires 'mw8998-002.0076.00'
You need to update the bootloader and possibly the baseband version.
The absolute easiest way to flash the factory firmware is with the Android Flash Tool. Leave your device connected to your computer, and go to this link. Allow ADB keys access when requested. Before you flash, make sure you click the pencil icon to choose options, as the tool selects Wipe Device and Lock Bootloader by default.
If you are still trying to flash your device manually, make sure your Platform Tools are up to date.
V0latyle said:
The screenshot you posted describes the problem. When you flash a factory image, it first checks the device bootloader and baseband versions to make sure they are up to date. If they are out of date, you get the error as shown:
Device bootloader version is 'mw8998-002.0059.00'
Update requires 'mw8998-002.0076.00'
You need to update the bootloader and possibly the baseband version.
The absolute easiest way to flash the factory firmware is with the Android Flash Tool. Leave your device connected to your computer, and go to this link. Allow ADB keys access when requested. Before you flash, make sure you click the pencil icon to choose options, as the tool selects Wipe Device and Lock Bootloader by default.
If you are still trying to flash your device manually, make sure your Platform Tools are up to date.
Click to expand...
Click to collapse
But bro when I trying to flash with Android flash tool showing this errors
Theracerlucky said:
But bro when I trying to flash with Android flash tool showing this errors
Click to expand...
Click to collapse
I haven't seen that error before. Your bootloader is unlocked, right?
Theracerlucky said:
But bro when I trying to flash with Android flash tool showing this errors
Click to expand...
Click to collapse
"FAILED (remote: Command Flash Error)" -- When flashing bootloader
When I was flashing factory updates on my Pixel 2 last night, I got an error at the first step (using the flash-all.sh method), when it flashes the bootloader: sending 'bootloader_a' (38728 KB)... OKAY [ 2.095s] writing 'bootloader_a'...
forum.xda-developers.com
V0latyle said:
I haven't seen that error before. Your bootloader is unlocked, right?
Click to expand...
Click to collapse
Yes properly unlocked bro
Theracerlucky said:
"FAILED (remote: Command Flash Error)" -- When flashing bootloader
When I was flashing factory updates on my Pixel 2 last night, I got an error at the first step (using the flash-all.sh method), when it flashes the bootloader: sending 'bootloader_a' (38728 KB)... OKAY [ 2.095s] writing 'bootloader_a'...
forum.xda-developers.com
Yes properly unlocked bro
Click to expand...
Click to collapse
Bro can you please read this post for me i think it's the same like my issues but i don't understand this things properly what i do
Theracerlucky said:
Bro can you please read this post for me i think it's the same like my issues but i don't understand this things properly what i do
Click to expand...
Click to collapse
I don't say this to be rude, but if you don't know what you're doing, nor understand the basic concepts at play here, you shouldn't be tinkering with your phone.
It looks like the user who posted that thread was able to fix his issue by sideloading the OTA. Do you have a custom recovery such as TWRP installed, or is everything stock?
I can provide instructions on how to sideload the OTA later today, but I must emphasize how important it is for you to understand what you are doing, because doing something wrong could result in bricking your device.
Lastly, please don't call me "bro".
V0latyle said:
I don't say this to be rude, but if you don't know what you're doing, nor understand the basic concepts at play here, you shouldn't be tinkering with your phone.
It looks like the user who posted that thread was able to fix his issue by sideloading the OTA. Do you have a custom recovery such as TWRP installed, or is everything stock?
I can provide instructions on how to sideload the OTA later today, but I must emphasize how important it is for you to understand what you are doing, because doing something wrong could result in bricking your device.
Lastly, please don't call me "bro".
Click to expand...
Click to collapse
Ok sir i don't installed any custom recovery now my devices all things is stock
Alright. Here's how to sideload the OTA.
Connect your device to your PC.
Download Pixel 2 December 2017 OTA. You can also try the December 2020 OTA. Do not unzip or extract these files, you will use them as-is.
In bootloader mode, use the Volume + and - buttons to select Recovery Mode, then press the Power button.
You will arrive at a screen with a green Android and "No command". Hold down the Power button and click the Volume Up button.
You will now be in the recovery menu. Use the Volume buttons to select Apply update from ADB, then press the Power button.
On your PC, open a command window in Platform Tools. Use this command: adb sideload, insert a space, then drag and drop the OTA file you just downloaded into the command window.
Press Enter. The sideload process will begin. Once it finishes, you will be taken back to Recovery Mode. Select Reboot now.
Your device should boot into Android. At this point you should be able to reboot to bootloader and use the Android Flash Tool to flash your desired update.
V0latyle said:
Alright. Here's how to sideload the OTA.
Connect your device to your PC.
Download Pixel 2 December 2017 OTA. You can also try the December 2020 OTA. Do not unzip or extract these files, you will use them as-is.
In bootloader mode, use the Volume + and - buttons to select Recovery Mode, then press the Power button.
You will arrive at a screen with a green Android and "No command". Hold down the Power button and click the Volume Up button.
You will now be in the recovery menu. Use the Volume buttons to select Apply update from ADB, then press the Power button.
On your PC, open a command window in Platform Tools. Use this command: adb sideload, insert a space, then drag and drop the OTA file you just downloaded into the command window.
Press Enter. The sideload process will begin. Once it finishes, you will be taken back to Recovery Mode. Select Reboot now.
Your device should boot into Android. At this point you should be able to reboot to bootloader and use the Android Flash Tool to flash your desired update.
Click to expand...
Click to collapse
Sir i know this process but my tension is this process work properly or i brick my device
Theracerlucky said:
Sir i know this process but my tension is this process work properly or i brick my device
Click to expand...
Click to collapse
Sideloading the OTA is actually the safest way to update, and the least likely of bricking your device.
As long as you're able to access bootloader, your device isn't truly bricked.
I understand your consternation, especially as it appears you're fairly inexperienced regarding this. Simply follow my instructions and you'll be fine. I'm trying to make this as easy and foolproof as possible for you.
V0latyle said:
Sideloading the OTA is actually the safest way to update, and the least likely of bricking your device.
As long as you're able to access bootloader, your device isn't truly bricked.
I understand your consternation, especially as it appears you're fairly inexperienced regarding this. Simply follow my instructions and you'll be fine. I'm trying to make this as easy and foolproof as possible for you.
Click to expand...
Click to collapse
Sir can I download this ota file for sideload or other versions
Theracerlucky said:
Sir can I download this ota file for sideload or other versions
Click to expand...
Click to collapse
Yes, that is the file I linked. Download it and follow the instructions I provided to sideload it.
If you don't follow instructions I don't know how else to help you.
Sir you busy now ??
When you free sir reply me i have one more last question answer me plz after that i try to sideload the ota
V0latyle said:
Yes, that is the file I linked. Download it and follow the instructions I provided to sideload it.
If you don't follow instructions I don't know how else to help you.
Click to expand...
Click to collapse
I see a video on YouTube ithink that is the same issues
V0latyle said:
Yes, that is the file I linked. Download it and follow the instructions I provided to sideload it.
If you don't follow instructions I don't know how else to help you.
Click to expand...
Click to collapse
V0latyle said:
Yes, that is the file I linked. Download it and follow the instructions I provided to sideload it.
If you don't follow instructions I don't know how else to help you.
Click to expand...
Click to collapse
Whe
V0latyle said:
Yes, that is the file I linked. Download it and follow the instructions I provided to sideload it.
If you don't follow instructions I don't know how else to help you
Click to expand...
Click to collapse
V0latyle said:
Yes, that is the file I linked. Download it and follow the instructions I provided to sideload it.
If you don't follow instructions I don't know how else to help you.
Click to expand...
Click to collapse
When I comented this Youtuber brothers he told me to sideload the latest ota file he created the video on 4 year ago but the latest ota is now Android 11 what can I do sir plz help i am confused he doesn't reply me after this comment reply