[Q] Freeze and automatic restarting..!! - HTC Pico (Explorer)

After flashing sense rom (walkman sense) pico freezes and automatically restarting.. :crying:
Tried flashing super_wipe.zip before flashing rom, and tried other roms too (cm11,carbon,nextgen,jaggy..!! ). The problem still persist..
How to fix this..??

Pee_kee said:
After flashing sense rom (walkman sense) pico freezes and automatically restarting.. :crying:
Tried flashing super_wipe.zip before flashing rom, and tried other roms too (cm11,carbon,nextgen,jaggy..!! ). The problem still persist..
How to fix this..??
Click to expand...
Click to collapse
some questions/ info needed
What recovery you using at the moment
Did you format everything but sdcard
Which firmware are you on / which region

anonymous-user said:
some questions/ info needed
What recovery you using at the moment
Did you format everything but sdcard
Which firmware are you on / which region
Click to expand...
Click to collapse
recovery : Latest TWRP
formatted every thing.. flashed superwipe.zip
am in india using Walkman sense rom 5.10.
problem persist in all rom..

Pee_kee said:
recovery : Latest TWRP
formatted every thing.. flashed superwipe.zip
am in india using Walkman sense rom 5.10.
problem persist in all rom..
Click to expand...
Click to collapse
ok, well have you tried relocking your bootloader and flashing RUU package back to full clean stock? if you`ve already done that properly (not by flashing some custom stock rom through recovery) then I guess its a repair shop job.

anonymous-user said:
ok, well have you tried relocking your bootloader and flashing RUU package back to full clean stock? if you`ve already done that properly (not by flashing some custom stock rom through recovery) then I guess its a repair shop job.
Click to expand...
Click to collapse
I didn't do that /*relocking your bootloader and flashing RUU package*/..
well, let me seek tutorials to do that.

Any tutorial with less risk than this one.? http://forum.xda-developers.com/showthread.php?t=1500165

Pee_kee said:
Any tutorial with less risk than this one.? http://forum.xda-developers.com/showthread.php?t=1500165
Click to expand...
Click to collapse
1st you need to find your firmware version, boot into bootloader and the info is there and then download the appropriate RUU package as these are region specific, I can tell you how to do it without much hassle so long as you have adb setup on your comp already and the unlock token or application used to unlock your bootloader.......
you can find all the RUU packages for pico here : http://www.androidruu.com/?developer=Pico
tell me which 1 it is and I`ll extract the files needed to be able to update it via sdcard

anonymous-user said:
1st you need to find your firmware version, boot into bootloader and the info is there and then download the appropriate RUU package as these are region specific, I can tell you how to do it without much hassle so long as you have adb setup on your comp already and the unlock token or application used to unlock your bootloader.......
you can find all the RUU packages for pico here : http://www.androidruu.com/?developer=Pico
tell me which 1 it is and I`ll extract the files needed to be able to update it via sdcard
Click to expand...
Click to collapse
This is RUU_Pico_hTC_Asia_India_1.31.720.3_Radio_10.35d.80.09H_1.11.82.17_release_230683_signed.exe

Pee_kee said:
This is RUU_Pico_hTC_Asia_India_1.31.720.3_Radio_10.35d.80.09H_1.11.82.17_release_230683_signed.exe
Click to expand...
Click to collapse
ok I have the specific RUU package for your region downloaded and I`ve extracted the rom.zip from the package, now I`m in the process of uploading the file for you. So you have adb working? the unlock token you used to unlock your bootloader or utility that will do the same job?

Ok here`s the full procedure for you
Download the the full firmware stock rom from here: http://www.freefilehosting.net/pj03img press "DOWNLAD THIS FILE" then enter the captcha, the file name is "PJ03IMG" do not modify it in anyway.
Copy the PJ03IMG file to the root of your sdcard (not in any folder)
Boot to Bootloader and connect usb to phone and computer, open CMD on windows or Terminal on Linux and type the following:
Code:
fastboot oem lock
you should now see on the phone that your bootloader has been "re-locked" if you see that you can now press the power button on phone to change to bootloader (mode see attached pic 1 at the bottom), now the phone will look for files on your sdcard (see pic 2 attached at the bottom)
at this point it should find the PJ03IMG file and a loading bar will appear on the right hand side, be patient it takes about 30 secs to load it. When its finished it will ask if you want to flash the update or not, use the volume keys to move the selector to yes and press the power button and the process will begin to totally reflash your phone back to stock once done it will ask you to reboot phone, voila done. the first boot will take some time as its a fresh install so give it afew minutes to get to homescreen, assuming all is well and phone is working as it should we can get a recovery back after unlocking the bootloader.

anonymous-user said:
will ask if you want to flash the update or not, use the volume keys to move the selector to yes and press the power button and the process will begin to totally reflash your phone back to stock
Click to expand...
Click to collapse
how pico do that without stock rom file.?! Where i should should keep rom.zip file.? how can i extract it from RUU_Pico_hTC_Asia_India_1.31.720.3_Radio_10.35d.80 .09H_1.11.82.17_release_230683_signed.exe..??

Related

[Q] HTC one S brick

Hello,
I'm new here but today I tried to root my phone and put CM10 on it. Rooting was not that hard but with flashing the rom I had some problems. I used a tutorial from youtube "Htc One s jellybean 4.2.2 Nightly Cm10.1 Rom" and did everything as he said but when I tried to boot CM it came in a boot loop so I restored my backup and everything was back normal again. But I thought i'll give it another try so I did that and it still didn't work so I restored (via recovery) and at the end it said: It appears your phone isn't rooted do you wanna do it now...(or something like that)? I found that a bit strange but I clicked yes but now if I boot up my phone first you just see "HTC - quietly brilliant" and then the red letters come beneath it saying its a developers version. I Couldn't do anything so I jumped into my bootloader and did factory reset but now everything is gone and I still have that booting problem,
I can acces bootloader and recovery mode but that's it
I really need my phone soon and don't have much time to look on the internet for solutions so could you please help me?
Thanks in advance!!
Lennard
Do you have the RUU for your phone? Maybe that would be the quick fix to take it back to stock. You can use an RUU that's equal or newer than what you have currently.
BTW: I went through this as well.
808phone said:
Do you have the RUU for your phone? Maybe that would be the quick fix to take it back to stock. You can use an RUU that's equal or newer than what you have currently.
BTW: I went through this as well.
Click to expand...
Click to collapse
I don't even know what that it >.< (sorry for being noob )
Did you flash boot.img with cm10
Sent from my One S
ka_55 said:
Did you flash boot.img with cm10
Sent from my One S
Click to expand...
Click to collapse
Jep, as instructed in the youtube video
Which hboot version and radio?
Cm10 uses 3.4.x kernel, it won't boot with old firmware
Sent from my One S
ka_55 said:
Which hboot version and radio?
Cm10 uses 3.4.x kernel, it won't boot with old firmware
Sent from my One S
Click to expand...
Click to collapse
Hboot : 2.15.000
Radio : 1.15.50.05.29
Then it can be a bad download. If not I I'm out of ideas
Sent from my One S
Do you remember doing any of the following?
-wipe data/factory reset
-wipe dalvik cache
I think that was my problem that I didn't wipe the cache completely. Possibly a bad download too. Do a search on md5. It's basically a check to see if your download is ok before flashing.
As far the RUU is concerned, it will take you back to stock. You will need the info that appears when you start the phone up by holding down VOL DOWN and POWER. Hold down volume down, then press the power for a second or 2. Then it will boot up into HBOOT.
Write down the info that appears and search for a matching RUU equal or newer.
What is the carrier???
808phone said:
Do you remember doing any of the following?
-wipe data/factory reset
-wipe dalvik cache
I think that was my problem that I didn't wipe the cache completely. Possibly a bad download too. Do a search on md5. It's basically a check to see if your download is ok before flashing.
As far the RUU is concerned, it will take you back to stock. You will need the info that appears when you start the phone up by holding down VOL DOWN and POWER. Hold down volume down, then press the power for a second or 2. Then it will boot up into HBOOT.
Write down the info that appears and search for a matching RUU equal or newer.
What is the carrier???
Click to expand...
Click to collapse
I did the factory reset, dalvik cache and cache wipe. When I tried to install CM it indeed said unable to find md5 or something like that.
I think I have a europe version and looked for fitting RUU but the numbers are completely different maybe you could find a good RUU? (See attachement) Btw I have S4/Ville/Z520e
CID
Could you please read out your CID? Then we can get right RUU.
You can do this by booting your One S into fastboot mode and use the toolkit from the link:
http://forum.xda-developers.com/showthread.php?t=2471151
LS.xD said:
Could you please read out your CID? Then we can get right RUU.
You can do this by booting your One S into fastboot mode and use the toolkit from the link:
http://forum.xda-developers.com/showthread.php?t=2471151
Click to expand...
Click to collapse
I don't know if this is it but it says CID: HTC__E11
Lennardude said:
I don't know if this is it but it says CID: HTC__E11
Click to expand...
Click to collapse
yes thats it
This should be the right RUU http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
MAY anyone who reads this confirm it? Just to be safe at all.
btw. "HTC_E11" = unbranded Netherlands
Due to you're S-ON you will have to relock your bootloader to perform a RUU update.
Here you can find a step by step RUU guide by "Flashalot" http://forum.xda-developers.com/showthread.php?p=51016251
LS.xD said:
yes thats it
This should be the right RUU http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
MAY anyone who reads this confirm it? Just to be safe at all.
btw. "HTC_E11" = unbranded Netherlands
Due to you're S-ON you will have to relock your bootloader to perform a RUU update.
Here you can find a step by step RUU guide by "Flashalot" http://forum.xda-developers.com/showthread.php?p=51016251
Click to expand...
Click to collapse
Should I first relock my bootloader and follow the tutorial to flash that RUU of vice versa?
Lennardude said:
Should I first relock my bootloader and follow the tutorial to flash that RUU of vice versa?
Click to expand...
Click to collapse
For RUU you need stock recovery and "locked" BL. Please read the guide again and only proceed, if you're sure you got it.
Another question:
You said you got a working recovery? Which version do you use? And have you tried install another custom rom.zip? That would be more easy and safe to you. May be your storage got corrupted and thats why your phone crashed and you can't install the rom.zip stored on the sd-card. You could connect the phone to your pc as mass storage via recovery, format it and put a new customrom.zip on it. By the way, why you installed such an old rom? You can use CM11 for sure
LS.xD said:
For RUU you need stock recovery and "locked" BL. Please read the guide again and only proceed, if you're sure you got it.
Another question:
You said you got a working recovery? Which version do you use? And have you tried install another custom rom.zip? That would be more easy and safe to you.
Click to expand...
Click to collapse
In that guide it doesn't say anything about a relocked bootloader.
I do have a working recovery but how can I get a zip file on it? I can't acces the files of my phone in windows explorer or something like that. Also I don't know if I have a stock recovery but if I don't I have to install that via a zip but how can I get that on my phone...?
Lennardude said:
In that guide it doesn't say anything about a relocked bootloader.
I do have a working recovery but how can I get a zip file on it? I can't acces the files of my phone in windows explorer or something like that. Also I don't know if I have a stock recovery but if I don't I have to install that via a zip but how can I get that on my phone...?
Click to expand...
Click to collapse
PLS boot in recovery mode and tell me what "version" it is You should find it. If you're not sure about it, you can flash a new recovery before installing a rom. Whe you have a working custom recovery you can mount your sd-card to your computer via recovery.
Found the RUU guide i had in mind http://forum.xda-developers.com/showthread.php?t=2501542
LS.xD said:
PLS boot in recovery mode and tell me what "version" it is You should find it.
Click to expand...
Click to collapse
v2.6.0.0
Lennardude said:
v2.6.0.0
Click to expand...
Click to collapse
that is TWRP. My suggestion ist installing the latest Recovery and try install CM11. I just get the links for you.
LS.xD said:
PLS boot in recovery mode and tell me what "version" it is You should find it. If you're not sure about it, you can flash a new recovery before installing a rom. Whe you have a working custom recovery you can mount your sd-card to your computer via recovery.
Found the RUU guide i had in mind http://forum.xda-developers.com/showthread.php?t=2501542
Click to expand...
Click to collapse
The problem is, we're talking about an HTC One S which DOESN"T have a SD Card slot...

[Q] Help: stucked TAMPERED LOCKED S-ON

Hi guys, a few day ago my One SV had some problems, rebooting itself and runs very slowly; so i tryed to do something like root it, but not knowing what i'm doing 'cause i don't have much time.
Probably installing a wrong rom, now I'm stuck in the bootloader with S-ON Tampered, Locked, and Security Warning flags.
The phone stuck with htc logo, i only manage to go into bootloader, pdanet gives me sync error, twrp recovery doesn't work anymore.
Is there something I can do now?
VictorCic said:
Hi guys, a few day ago my One SV had some problems, rebooting itself and runs very slowly; so i tryed to do something like root it, but not knowing what i'm doing 'cause i don't have much time.
Probably installing a wrong rom, now I'm stuck in the bootloader with S-ON Tampered, Locked, and Security Warning flags.
The phone stuck with htc logo, i only manage to go into bootloader, pdanet gives me sync error, twrp recovery doesn't work anymore.
Is there something I can do now?
Click to expand...
Click to collapse
As long as your device is Locked, you can't flash a custom recovery.
So unlock your device at htcdev.com, flash Twrp recovery and flash back a working rom.
Use a Android 4.1.2 rom, otherwise you will have problems with noisy sound.
old.splatterhand said:
As long as your device is Locked, you can't flash a custom recovery.
So unlock your device at htcdev.com, flash Twrp recovery and flash back a working rom.
Use a Android 4.1.2 rom, otherwise you will have problems with noisy sound.
Click to expand...
Click to collapse
Thanks, i've unlocked it and flashed Twrp recovery, but trying to using this last one always says unable to mount sd...
And could you help me to find the right rom or stock rom?
And trying to put it in s-off with revone, rumrunner, moonshine doensn't work
Thank you very much!
VictorCic said:
Thanks, i've unlocked it and flashed Twrp recovery, but trying to using this last one always says unable to mount sd...
And could you help me to find the right rom or stock rom?
And trying to put it in s-off with revone, rumrunner, moonshine doensn't work
Thank you very much!
Click to expand...
Click to collapse
How do you mount the sd?
At least pull it out of your device and put it into your PC and copy needed files in this way.
One thing i could not solve earlier (because of bad internet connection): did you already install the Android 4.2.2 update or what was your software running on your device before? Thats important to give you the right rom for your firmware!
I'll give you the links anyway:
4.1.2 -> http://forum.xda-developers.com/showthread.php?t=2254384
4.2.2 -> http://forum.xda-developers.com/showthread.php?t=2512742
Rumrunner & moonshine are confirmed working for your hboot, but which you should use at least also depends on your previous software.
old.splatterhand said:
How do you mount the sd?
At least pull it out of your device and put it into your PC and copy needed files in this way.
One thing i could not solve earlier (because of bad internet connection): did you already install the Android 4.2.2 update or what was your software running on your device before? Thats important to give you the right rom for your firmware!
I'll give you the links anyway:
4.1.2 -> http://forum.xda-developers.com/showthread.php?t=2254384
4.2.2 -> http://forum.xda-developers.com/showthread.php?t=2512742
Rumrunner & moonshine are confirmed working for your hboot, but which you should use at least also depends on your previous software.
Click to expand...
Click to collapse
Im sorry That error is from the twrp recovery when i try to install superuser.. It says unable to mount int sd.. I think internal memory
Ignore it. Only use the files, recommended in my index thread (use SuperSu, not Superuser), link in my signature.
And answer the other question.
old.splatterhand said:
Ignore it. Only use the files, recommended in my index thread (use SuperSu, not Superuser), link in my signature.
And answer the other question.
Click to expand...
Click to collapse
Sorry i had update it to 4.2.2
Ok, so you can use the second link for the stock rom. And rumrunner for S-off.
old.splatterhand said:
Ok, so you can use the second link for the stock rom. And rumrunner for S-off.
Click to expand...
Click to collapse
I installed the 4.2.2 versions, seems completed but phone remains with black screen showing only the top bar with the clock, then reboot itself; sometimes after reboot it shows the bottom clock and lock, you can also unlock it, but then it reboots;
One time it shows me the backgroud.
Maybe it's a motherboard problem, what do you think?
Thanks
VictorCic said:
I installed the 4.2.2 versions, seems completed but phone remains with black screen showing only the top bar with the clock, then reboot itself; sometimes after reboot it shows the bottom clock and lock, you can also unlock it, but then it reboots;
One time it shows me the backgroud.
Maybe it's a motherboard problem, what do you think?
Thanks
Click to expand...
Click to collapse
Have you flashed the boot.img with fastboot? Did you wipe everything before?
May give the 4.1.2 rom a try.
old.splatterhand said:
Have you flashed the boot.img with fastboot? Did you wipe everything before?
May give the 4.1.2 rom a try.
Click to expand...
Click to collapse
Yes, flashed boot.img and wipe data/cache/dalvik.
Later i'm gonna try the 4.1.2.. I hope that will work
VictorCic said:
Yes, flashed boot.img and wipe data/cache/dalvik.
Later i'm gonna try the 4.1.2.. I hope that will work
Click to expand...
Click to collapse
old.splatterhand said:
Have you flashed the boot.img with fastboot? Did you wipe everything before?
May give the 4.1.2 rom a try.
Click to expand...
Click to collapse
installed the 4.1.2 version..same as before (black screen, only the first time turned on it showed the background), apart it can show every time the ring to unlock the screen; unlocking it it reboot itself...
VictorCic said:
installed the 4.1.2 version..same as before (black screen, only the first time turned on it showed the background), apart it can show every time the ring to unlock the screen; unlocking it it reboot itself...
Click to expand...
Click to collapse
Stop. Did you only wipe data/cache/dalvik.
No system?
You need to wipe all, except internal & external sd!
old.splatterhand said:
Stop. Did you only wipe data/cache/dalvik.
No system?
You need to wipe all, except internal & external sd!
Click to expand...
Click to collapse
Also system yes. And if i wiped the internal sd?
anyway after installing the rom, from twrp internal storage is 0 MB
Then i'm running out of ideas
As the roms worked for other people, i also start thinking thats something bugged with your device.
You checked md5sum of the roms? Using latest TWRP recovery?
old.splatterhand said:
Then i'm running out of ideas
As the roms worked for other people, i also start thinking thats something bugged with your device.
You checked md5sum of the roms? Using latest TWRP recovery?
Click to expand...
Click to collapse
Yes, used the latest TWRP recovery.
the recovery say to me no md5 file, is this the problem?
How can I check the md5 now?
I don't know the name of the tool (i'm at work), but you will find it with google search, i think.
In recovery this is not a problem, its only to check on your pc, if the downloaded file is the same as the upload.
old.splatterhand said:
I don't know the name of the tool (i'm at work), but you will find it with google search, i think.
In recovery this is not a problem, its only to check on your pc, if the downloaded file is the same as the upload.
Click to expand...
Click to collapse
Checked, the codes matches..
Then i think your device has a defect
old.splatterhand said:
Then i think your device has a defect
Click to expand...
Click to collapse
Hi, i managed to change the motherboard, so trying to put a mod, the phone now stuck on the htc logo...
I unlocked it with htcdev, then installed the recovery but this one doesn't work, it says starting recovery but doesn't start..(trying to install a different recovery, it seems unable to rewrite it)
trying to do something i flashed with fastboot the stock boot.img and now the phone doesn't start anymore..
what can i do now? :crying:

Marshmallow Rom that will update all??

I'm currently on Verizon Version :5.0.1 Software :4.17.605.5. Is there a Marshmallow Rom that I can flash that will update firmware and give me the security/stagefrieght patches that verizon put out months ago? I'm rooted and S-off.
beeper10 said:
I'm currently on Verizon Version :5.0.1 Software :4.17.605.5. Is there a Marshmallow Rom that I can flash that will update firmware and give me the security/stagefrieght patches that verizon put out months ago? I'm rooted and S-off.
Click to expand...
Click to collapse
You can run MM ROMs, yes. There is one from Santod040 that is based off HTC Sense, and one by enewman17 that is based off GPe (Google Play edition)
There is no MM firmware however, until HTC releases it to us.
You can flash the latest 4.17.605.9 LP firmware, and run those above said MM ROMs
Where would I find and how would I flash the firmware..... Through twrp?
beeper10 said:
Where would I find and how would I flash the firmware..... Through twrp?
Click to expand...
Click to collapse
Verizon m8 Development forum: LINK
Latest Verizon firmware and instructions: LINK
Marshmallow Google Play Edition for Vzw m8: LINK
Marshmallow Sense 7 for Vzw m8: LINK
I tried updating the firmware with installing the above zip and it fails.
I've tried to flash the all in one update a bunch of times and it continuously fails.
beeper10 said:
I've tried to flash the all in one update a bunch of times and it continuously fails.
Click to expand...
Click to collapse
Need more info then "it fails".
Exact error or issue you encounter.
Pasting the terminal input and output here would be most useful.
Hard to instruct you any further from what little info you gave.
I'm doing it from the phone and there's no way I can copy and paste the results..... I tried to take a screen shot but that wouldn't work either. It doesn't give a reason it just goes to install and fails. Not sure how to give more info?
Here's a couple pictures of the issue.
beeper10 said:
Here's a couple pictures of the issue.
Click to expand...
Click to collapse
You don't flash it in recovery...
It fails because you aren't following the instructions given...
Copied from Santods thread:
http://forum.xda-developers.com/showpost.php?p=62734094&postcount=2
Place the zip in your fastboot/adb directory on your computer.
Put the device in fastboot mode
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
Enter the following commands from terminal/command prompt in the fastboot directory, one at a time:
fastboot oem rebootRUU (this puts the device in RUU mode)
fastboot flash zip firmware.zip (rename file to firmware.zip to make it simple/optional)
It will say that the update did not finish, to flush again, so repeat the above step:
fastboot flash zip firmware.zip
Important: the flash process halts at around 75% to 90% on phone screen! This is normal and a safety precaution!
The last few percent is the reboot, which is NOT happening automatically, so you get a chance to check the console output before reboot to make sure it is safe to reboot!
The bar will only fill up to 100% once you type the following command:
fastboot reboot-bootloader (this reboots the device to bootloader)
I left my computer at work... Is there anyway to do it from the phone?
beeper10 said:
I left my computer at work... Is there anyway to do it from the phone?
Click to expand...
Click to collapse
Yes... By using an sdcard...
Rename file to 0P6BIMG.zip and Copy 0P6BIMG.zip to root of a physical SD. No exfat! No internal storage!
Reboot phone to bootloader and follow prompts once furmware is detected by phone.
That I have! That's were I was trying to flash it from.
beeper10 said:
That I have! That's were I was trying to flash it from.
Click to expand...
Click to collapse
Again.... You do NOT flash in recovery.
And I'll post again...
Please follow the instructions.
Rename file to 0P6BIMG.zip and Copy 0P6BIMG.zip to root of a physical SD. No exfat! No internal storage!
Reboot phone to bootloader and follow prompts once firmware is detected by phone.

[HELP] HTC on e8sd MM update install ERROR

hey guys, yesterdy I got a notification for android 6.0 upgrade and it was a ~100mb file for preparation so i downloaded it and charged my battery and tapped to install it, it reboots and wants to start installing but then goes to recovery menu and gives an error
the phone is all stock, no root or bl unlock or anything
I attached the error msg below:
it's m8sd not e8sd, mistyped in topic
Might be due to bad zip file! Download the update again and try!
Kianush said:
hey guys, yesterdy I got a notification for android 6.0 upgrade and it was a ~100mb file for preparation so i downloaded it and charged my battery and tapped to install it, it reboots and wants to start installing but then goes to recovery menu and gives an error
the phone is all stock, no root or bl unlock or anything
I attached the error msg below:
it's m8sd not e8sd, mistyped in topic
Click to expand...
Click to collapse
I had a similar error as yours doing exactly the same thing but mine was a e8sw running LP5 Sense6 rooted stock with xposed.
Even when I uninstalled xposed and disabled supersu, I still could not install the upgrade.
Finally managed to get the upgrade by going all the way back to stock and allow the OTA updates all the way up the MM6 update. Took me nearly 2 days to do that.
I have taken clean twrp backups of all the stock updates and will try and post them here soon.
generalugh28 said:
I had a similar error as yours doing exactly the same thing but mine was a e8sw running LP5 Sense6 rooted stock with xposed.
Even when I uninstalled xposed and disabled supersu, I still could not install the upgrade.
Finally managed to get the upgrade by going all the way back to stock and allow the OTA updates all the way up the MM6 update. Took me nearly 2 days to do that.
I have taken clean twrp backups of all the stock updates and will try and post them here soon.
Click to expand...
Click to collapse
thank you for the information, but as I mentioned in op my phone is already all stock, I havent ever moded or rooted or anything, it's stock locked bootloader
Have the exact same issue. My device is compelitely stock. Tried flashing the recovery from the downloaded OTA but still got the sama error. Hopefully someone will be able to resolve the issue.
if you have problems in installing OTA updates, follow these steps
1. check if your CID and MID are matching each other. they should be both for same region. mine are for vietnam. mec_dugl / HTC__057
2.Flash an stock RUU from http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
3.Skip all registeration process and directly go to update menu.
4.this is a 3 stage update process: a small update for some applications/another 100 MB update for making device ready for main update!! / at last 1 GB main update . each one should be downloaded and installed separately.
5. after downloading 100MB update, DO NOT restart. coneect your phone to PC and go to download folder on phone internal memory, there should be a zip file containing updates(sadly I forgot file name), copy it on your PC and extract recovery.img from it.
6. boot your phone into bootloader and flash stock recovery you've extracted using fastboot.
7. now you have complete stock ROM. go to setting/update again and follow update process.
8.after updating you may flash twrp and supersu.
9. I don't know why, but there is a good chance that after messing with system files in MM you get stuck in several kinds of bootloops and soft-breaks. Don't worry; all you should do is going to recovery and wiping caches. sometimes you need a factory reset too. also have in mind that a complete boot after changing system files may take up to 15 minutes even without wipes.
@sam5154 well thank you for the info, Im gonna try these steps except, I will try to download again and flash recovery and try it before flashing a RUU and lose everything
but I hope it works anyway, btw mine is also vietnam region.
sam5154 said:
if you have problems in installing OTA updates, follow these steps
1. check if your CID and MID are matching each other. they should be both for same region. mine are for vietnam. mec_dugl / HTC__057
2.Flash an stock RUU from http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
3.Skip all registeration process and directly go to update menu.
4.this is a 3 stage update process: a small update for some applications/another 100 MB update for making device ready for main update!! / at last 1 GB main update . each one should be downloaded and installed separately.
5. after downloading 100MB update, DO NOT restart. coneect your phone to PC and go to download folder on phone internal memory, there should be a zip file containing updates(sadly I forgot file name), copy it on your PC and extract recovery.img from it.
6. boot your phone into bootloader and flash stock recovery you've extracted using fastboot.
7. now you have complete stock ROM. go to setting/update again and follow update process.
8.after updating you may flash twrp and supersu.
9. I don't know why, but there is a good chance that after messing with system files in MM you get stuck in several kinds of bootloops and soft-breaks. Don't worry; all you should do is going to recovery and wiping caches. sometimes you need a factory reset too. also have in mind that a complete boot after changing system files may take up to 15 minutes even without wipes.
Click to expand...
Click to collapse
Hi, thanks for this. I will try this once i got home.
But i have one questions, mine is Vietnam MEC_DUGL with stock lollipop 5.0.2. The RUU only available for stock lollipop 5.0.1. Can I use this RUU or should I look for specific RUU for lollipop 5.02?
Thanks!
Kianush said:
@sam5154 well thank you for the info, Im gonna try these steps except, I will try to download again and flash recovery and try it before flashing a RUU and lose everything
but I hope it works anyway, btw mine is also vietnam region.
Click to expand...
Click to collapse
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
sam5154 said:
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
Click to expand...
Click to collapse
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Kianush said:
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Click to expand...
Click to collapse
Have you tried the suggestion above? Let me know the result! Thanks man
sam5154 said:
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
Click to expand...
Click to collapse
and how to check for this mec_dugl / HTC__057?
the first part is ok it shows that in booloader menu, but how to check for HTC__057??
Kianush said:
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Click to expand...
Click to collapse
Kianush said:
and how to check for this mec_dugl / HTC__057?
the first part is ok it shows that in booloader menu, but how to check for HTC__057??
Click to expand...
Click to collapse
Here you go :
If you want more information, use ADB (if you don't how to get it going, use the search on the forum or Google about it).
While you phone is connected to your PC, type adb reboot bootloader and wait for your phone to reboot into bootloader mode. Once there, you can perform fastboot commands like getvar. Type fastboot getvar all and you will see all the information about the phone, including the product variable which lists the model you have.
Source : http://forums.androidcentral.com/htc-one-m7/320871-how-check-htc-one-variant-model.html
bataskhayal said:
Here you go :
If you want more information, use ADB (if you don't how to get it going, use the search on the forum or Google about it).
While you phone is connected to your PC, type adb reboot bootloader and wait for your phone to reboot into bootloader mode. Once there, you can perform fastboot commands like getvar. Type fastboot getvar all and you will see all the information about the phone, including the product variable which lists the model you have.
Source : http://forums.androidcentral.com/htc-one-m7/320871-how-check-htc-one-variant-model.html
Click to expand...
Click to collapse
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Kianush said:
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Click to expand...
Click to collapse
Yes bos, i also did the recovery trick but still cant make it work. So the only solution we havent try is to flash RUU which i doubt also will make it work since my phone also factory stock. So i guess will stay in 5.0.2 for a while.
Kianush said:
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Click to expand...
Click to collapse
Hi, I have managed to finally update my Vietnam HTC One E8 dual SIM (MEC_DUGL) to Android 6.0. The problem that cause the error is the error recovery file, hence I re-install the RUU to get the correct recovery.img file. Below are the steps :
Note : Try with your own risk
1. My device is currently stock 5.0.2 no root and locked. Before starting the update process please make sure to backup all of your important data. Im using the stock HTC backup software, when you restore your device after you finished your update process, it will re-install your currently installed apps , contacts, settings, etc.
2. Download RUU for your device here : http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
I downloaded :
[Vietnam][DUAL][M8sd][mec_dugl][CID HTC__059][OPAJ20000] :
[Lollipop 5.0.1][2.35.425.2] : LINK
Seems not match with my current software (5.0.2), but eventually it will do the magic.
3. Flash RUU. NOTE : You will lose all of your data in your internal phone memory. Make sure to backup all of your important files.
Steps:
1) Download RUU.
2) Rename RUU to 0PAJIMG.zip (the first character is a zero, NOT A LETTER O)
3) Put renamed 0PAJIMG.zip on your external_SD
4) Boot into your bootloader and make sure your in hboot and let it update its RUU.
5) No PC, no adb, no fastboot, no terminal is needed, just a root explorer to rename and transfer the renamed RUU file to external_sd
6) After you have updated your RUU, make sure to remove the 0PAJIMG.zip from your external_sd because it will ask to update your RUU everytime your reboot to your bootloader which it is technically supposed to do but its unnecessary after you have done it once (unless you are planning on flashing RUU again).
7) Done!
Source : http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
4. Reboot your phone, now your phone is back to factory stock, connect it to wifi, no need to set up any account, just go directly to software update from Settings > About > Software Updates. Just install all the available software updates (5.0.2 > 6.0 part 1 > 6.0 part 2).
5. BOOM! Your HTC One E8 now runs Android 6.0.1 Marshmallow.
6. Restore your phone from the stock HTC Backup Software.
7. Done

Please help: How to return htc u11 to stock

Hi guys,
My phone now is on LeeDroid custom ROM (Build 1.03.401.6.9_g CL923215)
What are the steps to return the htc u11 to stock please?
The original software number of my phone is: 1.11.400.4
EDIT: I went to: https://forum.xda-developers.com/showpost.php?p=72425224&postcount=5
& downloaded stock recovery & nandroid TWRP backup (for 1.11.400.4).
However, I couldnt flash that nandroid TWRP from TWRP recovery.
Long story short, I just got the phone today, I made a big mistake by not inserting the simcard in & testing to see if the phone working or not.
So, I went straight through the process of unlocking bootloader, installing TWRP, Rooting, Installing custom ROM without making a nandroid backup.
For all that, the phone did not recognize the sim cards (tried both my sim & my gf's sim. not working)
The store will take back the phone as long as I return it to stock.
Thanks for your help!!!
dsymbol said:
Hi guys,
What's the process of returning the htc u11 to stock please?
Googling doesn't give me much result.
Long story short but I just got the phone today, I made a big mistake by not inserting the simcard in & testing to see if the phone working or not.
So, I went straight through the process of unlocking bootloader, installing TWRP, Rooting, Installing custom ROM without making a nandroid backup.
For all that, the phone did not recognize the sim cards (tried both my sim & my gf's sim. not working)
The store will take back the phone as long as I return it to stock.
Thanks for your help!!!
Click to expand...
Click to collapse
You'll need to download the stock rom for your verison (ruu). Hopefully one is available. Check the guide section here.
purple patch said:
You'll need to download the stock rom for your verison (ruu). Hopefully one is available. Check the guide section here.
Click to expand...
Click to collapse
I've downloaded stock recovery & nandroid TWRP backup of my stock ROM now.
What are the steps to revert the phone to stock please?
Thanks
dsymbol said:
I've downloaded stock recovery & nandroid TWRP backup of my stock ROM now.
What are the steps to revert the phone to stock please?
Thanks
Click to expand...
Click to collapse
Restore the TWRP backup, check everything is working, then flash stock recovery if you need to. The stock Nandroid should include recovery asfaik. I'm more of a trial and error guy lol. Read guide pages to know for certain, check HTC 10 guides, same steps.
purple patch said:
Restore the TWRP backup, check everything is working, then flash stock recovery if you need to. The stock Nandroid should include recovery asfaik.
Click to expand...
Click to collapse
ok so I downloaded TWRP_Backup_Untouched_System_Image_+_Boot_1.11.400.4_OCEAN_DUGL_with_recovery.
1. Transfering the TWRP backup to the phone's storage
2. Flashing that backup just like flashing the custom ROM (it says Invalid zip file format. Error ect...) Please help
3. Flashing the recovery just like flashing the TWRP using adb commands
4. Lock the bootloader? I don't know how to do this.
Please advice
Thanks purple patch
dsymbol said:
ok so I downloaded TWRP_Backup_Untouched_System_Image_+_Boot_1.11.400.4_OCEAN_DUGL_with_recovery.
1. Transfering the TWRP backup to the phone's storage
2. Flashing that backup just like flashing the custom ROM (it says Invalid zip file format. Error ect...) Please help
3. Flashing the recovery just like flashing the TWRP using adb commands
4. Lock the bootloader? I don't know how to do this.
Please advice
Thanks purple patch
Click to expand...
Click to collapse
Get the one from here and follow instructions. That's what the thread is for. https://forum.xda-developers.com/u11/how-to/collection-htcu-u11-ruu-firmware-t3612048. Sorry i don't have time to do the leg work for you (i'm out atm), but it's all there.
download this Official RRU firmware and install it https://forum.xda-developers.com/u11/how-to/unlocked-htc-u11-software-update-6-19-t3624814
Use the ruu, you might need the HTC drivers but in the future never not make a backup, 15 mins could save u a major headache
AllGamer said:
download this Official RRU firmware and install it https://forum.xda-developers.com/u11/how-to/unlocked-htc-u11-software-update-6-19-t3624814
Click to expand...
Click to collapse
I'm downloading it now & will report back very soon.
Thanks for the tip AllGamer!!!
AllGamer said:
download this Official RRU firmware and install it https://forum.xda-developers.com/u11/how-to/unlocked-htc-u11-software-update-6-19-t3624814
Click to expand...
Click to collapse
Finished downloading & now I got an ERROR installation, something like a wrong ROM, probably because I'm currently on LeeDroid custom ROM (Build 1.03.401.6.9_g CL923215)
Please advice
Thank you
dsymbol said:
Finished downloading & now I got an ERROR installation, something like a wrong ROM, probably because I'm currently on LeeDroid custom ROM (Build 1.03.401.6.9_g CL923215)
Please advice
Thank you
Click to expand...
Click to collapse
Your going to need a full signed RUU zip matching your original firmware and CID buddy.
Based on your original build number its an Indian dual SIM device so here is the ruu:
https://www.androidfilehost.com/?fid=817550096634780026
1. Rename it to 2PZCIMG.zip
2. Lock your bootloader
3. Drop the zip on your external SD card.
3. Boot to download mode, at that point you will be prompted to flash... Accept... Profit.
If you don't have an external SD.
1. Lock your bootloader.
2. Boot to download mode.
3. Open a cmd window and run the below commands.
fastboot orm rebootRUU (hit enter)
fastboot flash zip (drag the zip into the cmd window then hit enter)
dsymbol said:
Finished downloading & now I got an ERROR installation, something like a wrong ROM, probably because I'm currently on LeeDroid custom ROM (Build 1.03.401.6.9_g CL923215)
Please advice
Thank you
Click to expand...
Click to collapse
On the PC side, what was the exact error message?
you can ignore the warning from the phone side.
I had a similar issue the other day, but then I was able to run the RUU upgrade to rest my phone back to stock as I had to ship it back for a refund, to get the new Red ones
When I ran the RUU thing it wouldn't detect the phone, did a few things, and then it was finally able to detect the phone.
and when it started updating the Boot image it hung for a long while, I had to restart the phone back into download mode, then run the RUU again, and it was able to continue from there.
AllGamer said:
On the PC side, what was the exact error message?
you can ignore the warning from the phone side.
I had a similar issue the other day, but then I was able to run the RUU upgrade to rest my phone back to stock as I had to ship it back for a refund, to get the new Red ones
When I ran the RUU thing it wouldn't detect the phone, did a few things, and then it was finally able to detect the phone.
and when it started updating the Boot image it hung for a long while, I had to restart the phone back into download mode, then run the RUU again, and it was able to continue from there.
Click to expand...
Click to collapse
It says: ERROR [130]: MODEL ID ERROR
The ROM Update Utility cannot update your Android phone.
Please get the correct ROM Update Utility and try again.
The previous screen says:
Verifying that you want to update
Image version 1.03.401.6
to
Image version 1.11.617.4
LeeDroid said:
Your going to need a full signed RUU zip matching your original firmware and CID buddy.
Based on your original build number its an Indian dual SIM device so here is the ruu:
https://www.androidfilehost.com/?fid=817550096634780026
1. Rename it to 2PZCIMG.zip
2. Lock your bootloader
3. Drop the zip on your external SD card.
3. Boot to download mode, at that point you will be prompted to flash... Accept... Profit.
Click to expand...
Click to collapse
I'm on it now & will report back!
Thank you Sir for joining the party. I have hope now
dsymbol said:
I'm on it now & will report back!
Thank you Sir for joining the party. I have hope now
Click to expand...
Click to collapse
Added an extra step incase you don't have an external sd
dsymbol said:
It says: ERROR [130]: MODEL ID ERROR
The ROM Update Utility cannot update your Android phone.
Please get the correct ROM Update Utility and try again.
The previous screen says:
Verifying that you want to update
Image version 1.03.401.6
to
Image version 1.11.617.4
Click to expand...
Click to collapse
The 1.03.401.6 may be European software. You will need the RUU for your exact phone model from: http://www.htc.com/us/support/updates.aspx
or https://forum.xda-developers.com/u1...u-firmware-t3612048/post72425227#post72425227
michaelbsheldon said:
The 1.03.401.6 may be European software. You will need the RUU for your exact phone model from: http://www.htc.com/us/support/updates.aspx
or https://forum.xda-developers.com/u1...u-firmware-t3612048/post72425227#post72425227
Click to expand...
Click to collapse
I have linked the correct ruu in my post above as per the original firmware mentioned in the op
The correct build is 1.11.400.4
LeeDroid said:
I have linked the correct ruu in my post above as per the original firmware mentioned in the op
The correct build is 1.11.400.4
Click to expand...
Click to collapse
I have the ext. sdcard ready.
I have a question about locking the bootloader please
To lock the bootloader, I have to do this? (found instruction from google)
adb reboot bootloader
& type in 1 of these commands & stop there if it works?
fastboot oem lock
fastboot flashing lock
fastboot oem relock
Please advice
dsymbol said:
I have the ext. sdcard ready.
I have a question about locking the bootloader please
To lock the bootloader, I have to do this? (found instruction from google)
adb reboot bootloader
& type in 1 of these commands & stop there if it works?
fastboot oem lock
fastboot flashing lock
fastboot oem relock
Please advice
Click to expand...
Click to collapse
adb reboot download
fastboot oem lock
LeeDroid said:
adb reboot download
fastboot oem lock
Click to expand...
Click to collapse
Confirmation number: 5G354245BV234401U

Categories

Resources