So in the process of updating my rom, I managed to damage my /data/ partition, meaning I now have no ROM on my phone. I've updated TWRP to the newest version, I've got a stock firmware on file and a custom firmware if needed, both CWM and TWP on file, I've tried flashing or running all of the above but I can't get anything to actually load to the phone. I've also tried loading a rom via USB-OTG but I can't get it to mount. Normally in this situation I'd run an odin update for the stock firmware but I can't find anything about that, and all the brick threads in XDA don't seem to be helping. Does anyone have some suggestions?
Edit: I do have fastboot access but no ADB. Sideload isn't working through TWRP and I don't know why.
You have to return to stock using flash boot... It happened to me as well...
Well, I tried http://forum.xda-developers.com/showthread.php?t=2542219 and now I'm looking at the "warning: unlocked bootloader" screen...
Related
Hey All,
I just got my One XL and I was so excited by the root on 2.20 that I decided to try and flash the custom rom of AOKP on onto it.
After rooting the phone, I did the following:
Flashed TWRP 2.3.1.0 - success
Then I went and saw the thread about the AOKP rom and followed instructions. On that thread, it states that you must flash the boot.img before doing this through fastboot if you are coming forom 2.20 firmware, so I did that. Then I saw that it said on the thread "do not complain about bootlooping if you flashed a custom KERNEL or did not manually flash the stock KERNEL via fastboot" As this was the first custom rom I had attemped with this phone I assumed that I had the stock KERNEL already installed, so I did not flash any kind of kernel.
As soon as I flashed the boot.img from AOKP, I saw that there was red writing on the bootloader about this being for development use only and I noticed that the phone would get past the bootloader to a black screen and then would reboot (boot loop).
I thought that the issue here was that I did not flash the kernel so I went and downloaded the rohan.kernel and flashed that. HOWEVER, I did not realize that I was meant to use recovery to do that and I pushed the boot.img from within the kernel via fastboot instead of using recovery to flash the new kernel (not sure if that matters all that much, but I think that from now on all rom work will be done in the day time after sleeping a little more).
After doing that I see no change in the performance of the phone (it is still boot looping). I am unsure of what to do now. I managed to push the KERNEL zip file and the ROM zip file to the phone via adb but when I try and install them via TWRP I am getting an error because the phone reports that it is unable to mount /sdcard/.
Can one of the far more knowlegable gurus here point me in the right direction? I have wiped the cache and davlik cache numerous times but that has not helped. Should I use TWRP to wipe the system? How can I get the phone back to a place where I can install the new rom?
Thanks!!
ackerchez said:
Hey All,
I just got my One XL and I was so excited by the root on 2.20 that I decided to try and flash the custom rom of AOKP on onto it.
After rooting the phone, I did the following:
Flashed TWRP 2.3.1.0 - success
Then I went and saw the thread about the AOKP rom and followed instructions. On that thread, it states that you must flash the boot.img before doing this through fastboot if you are coming forom 2.20 firmware, so I did that. Then I saw that it said on the thread "do not complain about bootlooping if you flashed a custom KERNEL or did not manually flash the stock KERNEL via fastboot" As this was the first custom rom I had attemped with this phone I assumed that I had the stock KERNEL already installed, so I did not flash any kind of kernel.
As soon as I flashed the boot.img from AOKP, I saw that there was red writing on the bootloader about this being for development use only and I noticed that the phone would get past the bootloader to a black screen and then would reboot (boot loop).
I thought that the issue here was that I did not flash the kernel so I went and downloaded the rohan.kernel and flashed that. HOWEVER, I did not realize that I was meant to use recovery to do that and I pushed the boot.img from within the kernel via fastboot instead of using recovery to flash the new kernel (not sure if that matters all that much, but I think that from now on all rom work will be done in the day time after sleeping a little more).
After doing that I see no change in the performance of the phone (it is still boot looping). I am unsure of what to do now. I managed to push the KERNEL zip file and the ROM zip file to the phone via adb but when I try and install them via TWRP I am getting an error because the phone reports that it is unable to mount /sdcard/.
Can one of the far more knowlegable gurus here point me in the right direction? I have wiped the cache and davlik cache numerous times but that has not helped. Should I use TWRP to wipe the system? How can I get the phone back to a place where I can install the new rom?
Thanks!!
Click to expand...
Click to collapse
First of all I think if you're on 2.2 fw I don't think you can flash kernels through TWRP - I think it has to be through fastboot, I don't know first hand as I'm still on an earlier fw version.
Secondly if you can get into recovery you can flash another rom.
Go to Mount > Mount USB Storage with your phone connected via USB, it should mount as a drive otherwise windows asks you to format format the drive if this happens chances are may have wiped it in bootloader with factory reset or clear storage in either case just format the drive.
You can then drag and drop another rom onto the phone and flash that - remember to extract the boot.img from the rom and flash via fastboot so it will boot.
Goodluck
thejosh86 said:
First of all I think if you're on 2.2 fw I don't think you can flash kernels through TWRP - I think it has to be through fastboot, I don't know first hand as I'm still on an earlier fw version.
Secondly if you can get into recovery you can flash another rom.
Go to Mount > Mount USB Storage with your phone connected via USB, it should mount as a drive otherwise windows asks you to format format the drive if this happens chances are may have wiped it in bootloader with factory reset or clear storage in either case just format the drive.
You can then drag and drop another rom onto the phone and flash that - remember to extract the boot.img from the rom and flash via fastboot so it will boot.
Goodluck
Click to expand...
Click to collapse
Hey!
Thanks a ton for your reply! I managed to get the phone to install a new ROM (AOKP V5) and it seems to boot up. Now when I get into that rom, I see all kinds of things crashing on me. The "Settings" app crashes, the keyboard crashes..any idea?
Did you wipe system, factory reset, davlik and cache from within TWRP before flashing?
Try that otherwise if you're still running into issues post in the thread.
You flashed the 11/10 JB gapps?
Sent from my Nexus 7 using xda premium
ok, i got the phone back up now and have been able to flash stuff properly.
I am working on an issue where after flashing a new rom (AOKP v4) and then a new kernel right after (rohan.kernel V2) the rom seems to hang on the loading splash screen. Has anyone else had this happen? Know how to solve it?
ackerchez said:
ok, i got the phone back up now and have been able to flash stuff properly.
I am working on an issue where after flashing a new rom (AOKP v4) and then a new kernel right after (rohan.kernel V2) the rom seems to hang on the loading splash screen. Has anyone else had this happen? Know how to solve it?
Click to expand...
Click to collapse
Did u wipe everything? (davlik, cache)
Sent from my HTC One XL using xda premium
I have a Boost 1031 and I unlocked bootloader and rooted with no issues. Phone was 4.4.1 and auto-updated to 4.4.4. I installed TWRP and tried flashing CM13 which indicated 1031 was compatible. Couldn't install due to outdated bootloader version so followed post saying edit text out of rom to bypass and it will update automatically. I did, and it worked, but I just got the CM13 logo bootloop. Thought maybe I could go back to stock and take it slower with a stock 5.1 or GPE but can't "downgrade" now since CM13 did successfully flash.
via command in fastboot I am on bootloader version 411A.
I have tried:
adb sideloading factory image for Boost Falcon - failed due to partition error.
adb sideloading 5.1 optimized rom, CM12 and CM13 - failed due to not able to mount anything.
extracted and via fastboot:
4.4 stock factory image - successfully installed w/initial errors relating to downgrade as warned, stuck on 'unlocked bootloader' screen
5.1 optimized rom - successfully installed, stuck on loop of sad broken android on his side.
CWM recovery
3 versions of TWRP
Is there anything else I can try? I can still get into fastboot and the custom recovery.
Thanks!
static.chaos73 said:
I have a Boost 1031 and I unlocked bootloader and rooted with no issues. Phone was 4.4.1 and auto-updated to 4.4.4. I installed TWRP and tried flashing CM13 which indicated 1031 was compatible. Couldn't install due to outdated bootloader version so followed post saying edit text out of rom to bypass and it will update automatically. I did, and it worked, but I just got the CM13 logo bootloop. Thought maybe I could go back to stock and take it slower with a stock 5.1 or GPE but can't "downgrade" now since CM13 did successfully flash.
via command in fastboot I am on bootloader version 411A.
I have tried:
adb sideloading factory image for Boost Falcon - failed due to partition error.
adb sideloading 5.1 optimized rom, CM12 and CM13 - failed due to not able to mount anything.
extracted and via fastboot:
4.4 stock factory image - successfully installed w/initial errors relating to downgrade as warned, stuck on 'unlocked bootloader' screen
5.1 optimized rom - successfully installed, stuck on loop of sad broken android on his side.
CWM recovery
3 versions of TWRP
Is there anything else I can try? I can still get into fastboot and the custom recovery.
Thanks!
Click to expand...
Click to collapse
Try to flash the 5.1 Factory Firmware Image:
http://forum.xda-developers.com/showthread.php?t=2542219
http://forum.xda-developers.com/moto...mware-t3110795
From that point you can move on to custom ROMs if you wish
satanas17 said:
Try to flash the 5.1 Factory Firmware Image:
http://forum.xda-developers.com/showthread.php?t=2542219
http://forum.xda-developers.com/moto...mware-t3110795
From that point you can move on to custom ROMs if you wish
Click to expand...
Click to collapse
Yes I have tried that. The problem is that I can't flash anything because there is no recognized system. No matter what rom it is, it can't mount sd card, data, /dev/block/platform etc. After more research I think I may need to reformat the partitions but in adb I get an error of no superuser. I'm trying to see if I can do it in fastboot instead.
static.chaos73 said:
Yes I have tried that. The problem is that I can't flash anything because there is no recognized system. No matter what rom it is, it can't mount sd card, data, /dev/block/platform etc. After more research I think I may need to reformat the partitions but in adb I get an error of no superuser. I'm trying to see if I can do it in fastboot instead.
Click to expand...
Click to collapse
OK, finally got it working! I used fastboot to partition with the gpe image of the rom I was trying to flash, then fastboot to format. Then I went into recovery and tried to mount data/system/cache. Data was still not available, so I used recovery to format data and got it mounted. I tried a few different roms and finally was able to get cyanpop marshmallow to load up and run. I'm going to try and figure out what the difference is because I want CM13 nightly eventually. I tried to downgrade back to 4.4 stock but never could get past the downgrade errors when flashing in recovery, and flashing via fastboot or adb sideload would just fail.
Anyway, thanks for your help!
You seem to be making things more complicated than necessary. You should be aware Firmware Images can only be flashed via Fastboot. Flashing the GPE firmware image formatted userdata (/data) to EXT4. Stock ROMs will not boot if you have an EXT4 /data partition. See the FAQ in my Stock ROM collection thread.
lost101 said:
You seem to be making things more complicated than necessary. You should be aware Firmware Images can only be flashed via Fastboot. Flashing the GPE firmware image formatted userdata (/data) to EXT4. Stock ROMs will not boot if you have an EXT4 /data partition. See the FAQ in my Stock ROM collection thread.
Click to expand...
Click to collapse
OK that makes sense. I will read through your FAQ before attempting to flash anything else. Thank you for the information!
I just flashed many different versions of TWRP downloaded from their site(I got only the ones compatible with my P5100). After successfully flashing them all through Odin, I can't boot into recovery. The TWRP logo screen is shown and after 2 seconds the device reboots. I followed many guides, and they were all similar in this particular process. Am I missing something, or could there be anything wrong with my unit?
light401 said:
I just flashed many different versions of TWRP downloaded from their site(I got only the ones compatible with my P5100). After successfully flashing them all through Odin, I can't boot into recovery. The TWRP logo screen is shown and after 2 seconds the device reboots. I followed many guides, and they were all similar in this particular process. Am I missing something, or could there be anything wrong with my unit?
Click to expand...
Click to collapse
did you also installed a rom??
No. I'm running the stock rom, no root. I just wanted to get the twrp installed because I need to copy my personal files to an sd card. My stock rom is rebooting itself after completing the normal system startup. I can barely open any app. So I need to backup my files and do a factory reset. Any ideas? Thanks!
I think you need to get rid of TWRP and root the stock ROM, then flash TWRP using an app running on your tablet. Do not use a PC to flash the recovery. Also, if you are installing a zip, you must do it on the device, not through your PC.
Ka-B00M said:
I think you need to get rid of TWRP and root the stock ROM, then flash TWRP using an app running on your tablet. Do not use a PC to flash the recovery. Also, if you are installing a zip, you must do it on the device, not through your PC.
Click to expand...
Click to collapse
That doesn't make sense. Odin exists for the exact purpose of flashing through a PC, in case your recovery or anything gets damaged.
I'm gonna keep it simple, here is the scenario:
ROM is corrupted.
Bootloader is unlocked.
FRP lock is on. (fastboot can't do much)
TWRP was flashed back to stock.
Stock hard-reset fails. (even wipe option)
Force upgrade stops at 5% (swear I am using the same one)
eRecovery does not work.
Can't flash. Can't push files.
Wat do.
Model: BLN-L24C567B369 (pretty sure this was it)
Whole story:
This whole episode began when I wanted to install Magisk to use MagiskManager's HideMe feature. This required me to install TWRP recovery which inturn lead me to unlock my bootloader in the process, straightforward and went off nicely. Now it was time to gain superuser which I already had done before on another device, installing SuperSU through TWRP recovery was painless but after booting found out MagiskManager needs Magisk Root to work. I then followed Android Exlpained's article to do so. Running unSU through recovery went smoothly but running Magisk didn't, on the initial run I was prompted to use Adrian DC's BootBridge which after removing a few Assert lines ran nicely. However there was no root install, SuperSU was removed though.
At the time I wasn't sure what exactly I was doing and ended up soft-bricking by flash boot through TWRP, at this time FRP was unlocked. After many many hours I restored to stock firmware by using YMNDLZ's guide. I used BLN-L24C567B370(OTA-MF-FULL) for the img files then proceed to flash the vendor.img using TWRP and the rest (boot.img, recovery.img, system.img) using fastboot in that order as instructed. The only part which didn't work was the forced update, it always failed at 5% however after more hours going recovery mode (now stock) wiping the cache and data/factory reset did the trick (Note: my model showed BLN-L24C567B369). I proceeded to reinstall TWRP, installed MagiskManager, tried to install Magisk 16.0 which ran but didn't root me but was fine because MagiskManager's download worked. I then thought since I went through all this trouble might as well install a custom rom, EliteRom was my ROM of choice. At this point I had logged in with my gmail credentials FRP was now locked.
*Before further action was taken I took the precaution to backup my current stable stock ROM after installing EliteROM but before booting*
The steps to install EliteROM went by flawlessly, installed EliteTWRP reboot into it, ran EliteROM
went through the setup without any hiccups. However up system restart I the ROM wouldn't boot leading me to boot into my recovery only to be prompted for an encryption password (???). Since I didn't recall setting one, couldn't boot into the OS, and FRP was locked I couldn't read my own internal storage. So I reformatted the internal storage and tried what had worked before, flashing the img files using TWRP then booting into stock recovery wiping cache and data/hard reset. . . this did not work. And here I am FRP locked so fastboot isn't useful (I think?), stock recovery doesn't work, eRecovery fails connection, and force update still fails at 5% with "Software install failed!".
Click to expand...
Click to collapse
Lemme know if there is any insight anyone can provide and thanks in advance.
This problem has been solved?
MisterRee said:
I'm gonna keep it simple, here is the scenario:
ROM is corrupted.
Bootloader is unlocked.
FRP lock is on. (fastboot can't do much)
TWRP was flashed back to stock.
Stock hard-reset fails. (even wipe option)
Force upgrade stops at 5% (swear I am using the same one)
eRecovery does not work.
Can't flash. Can't push files.
Wat do.
Model: BLN-L24C567B369 (pretty sure this was it)
Lemme know if there is any insight anyone can provide and thanks in advance.
Click to expand...
Click to collapse
you have to follow only xda methods to root or change to custom rom. i have never heard about flashing stock images from twrp. i think u didn't followed elite rom instructions clearly. you need to formate data then reboot to recovery then wipe everything then flash the os in this way you won't get encription error. anyway now your frp is locked so there is no way to flash twrp so download all the available firmwares for your phone oeminfo then do flashing via dload you will get it worked.
even i was also once stuck with elite rom. i didn't liked it because missing apps icon and forgetting permission. i tried to go back to stock but stuck at 5% error. then went to google searched stock rom for honor 6x india and downloaded nearly 3 roms last one worked helped me to get back to stock.
never flash system images boot,vendor etc from fastboot and twrp unless you are on emui8 and going to try gsi roms.
hey i cant revert back to stock rom. it fails to get package from server. does jio voice calling works on this device?? if no then plz guide me how to go back to stock rom..
MisterRee said:
I'm gonna keep it simple, here is the scenario:
ROM is corrupted.
Bootloader is unlocked.
FRP lock is on. (fastboot can't do much)
TWRP was flashed back to stock.
Stock hard-reset fails. (even wipe option)
Force upgrade stops at 5% (swear I am using the same one)
eRecovery does not work.
Can't flash. Can't push files.
Wat do.
Model: BLN-L24C567B369 (pretty sure this was it)
Lemme know if there is any insight anyone can provide and thanks in advance.
Click to expand...
Click to collapse
Register for update using firmware finder and Puts dns address in the router settings and then use erecovery
Hi All,
I've been trying to install TWRP, Root etc on my XZP since yesterday. I've done something wrong at some point, and now my phone will not boot at all.
I had no troubles unlocking bootloader, installing TWRP etc initially. I then tried to install a custom rom from these forums and that's where things spiraled downwards for me.
As part of that procedure, I needed to flash the latest sony firmware first. That went fine.
However, now TWRP is not able to decrypt storage, so I'm not able to flash anything else. Perhaps this is because I booted into the new sony firmware and forgot change the pattern/fingerprint to pin/fingerprint.
So I'm not able to unlock the storage via TWRP by entering a password.
I tried to reflash the same firmware again using newflasher. But the phone won't boot at all. It turns off immediately after the Unlocked bootloader warning. It's not going into a boot loop. Just turns off.
I then tried to flash the TWRP recovery image using adb fastboot command, and the flash seemed to execute properly, but I still can not boot into recovery.
Is it possible the main storage is still encrypted, so nothing can flash to it? Bricked? If so, how do I proceed?
I read something about reformatting partitions? But I'm not able to get into TWRP recovery menu to do this.
*EDIT: I reflashed trwp recovery image, and am not able to boot into recovery. I still can not unlock (unencrypt) the main storage though.
*2nd EDIT: I followed the instructions here:https://forum.xda-developers.com/android/general/how-to-fix-unable-to-mount-data-t3830897
I was then able to flash the stock ROM back onto my device, and I'm able to boot my phone up. I'll look at installing a custom ROM at a later date.
Thread closed at OP request