Hi!
My main aim is to root a china phone (symphony w67).
I made the scatter file, rom and stuffs. Now the problem I end up with is when I want to make the cwm recovery image using the Mtk Droid Tools. Here is the log:
--------------------------------------------------------------------------------------------------------------------------------------
--->>> Connect to device <<<--- --- The preservation folder on the computer: C:\Users\Adib\Desktop\MtkDroidTools v2.5.3\backups\W67_140811_ForFlashtoolFromReadBack_141029-124724\ --- scatter is write to the file:
C:\Users\Adib\Desktop\MtkDroidTools v2.5.3\backups\W67_140811_ForFlashtoolFromReadBack_141029-124724\MT6572_Android_scatter.txtcopying is complete
-- preloader.bin ...it is copied ... cut OK
-- MBR ...it is copied
-- EBR1 ...it is copied
-- pro_info ...it is copied
-- nvram.bin ...it is copied
-- protect_f ...it is copied
-- protect_s ...it is copied
-- seccfg ...it is copied
-- uboot.bin ...it is copied
-- boot.img ...it is copied
--- ERROR :No find KernelGZ
--- ERROR :No Split Boot Image
-- recovery.img ...it is copied
-- secro.img ...it is copied
-- misc ...it is copied
-- logo.bin ...it is copied
-- expdb ...it is copied
-- system.img ...it is copied
--- task is complete ---
------------------------------------------------------------------------------------------------------------------------------------------------
As u can see there are 2 errors:
--- ERROR :No find KernelGZ
--- ERROR :No Split Boot Image
and also no modified cwm recovery image is created in the backup folder. So may I please have some solution for this error? I became very desperate, been trying to root this device for 4 days.
Below are more details about the mobile if it helps in anyway:
Model number: W67
Android version: 4.4.2
Baseband version: MOLY.WR8.W1315.MD,WG.MP.V43, 2014/05/22 18:56
Kernel version: 3.4.67
Build number: W67_1_XXX_V01.0_V2.0_20140809
Hi,
The best place to ask your question will be in the thread dedicated to the mtk droid tools found here
http://forum.xda-developers.com/showthread.php?t=2160490
But as xda recently changed some rules I am not sure if you can post in the dev section, so if not try the general q&a and link your question to that thread
http://forum.xda-developers.com/android/help
Best of luck!
demkantor said:
Hi,
The best place to ask your question will be in the thread dedicated to the mtk droid tools found here
http://forum.xda-developers.com/showthread.php?t=2160490
But as xda recently changed some rules I am not sure if you can post in the dev section, so if not try the general q&a and link your question to that thread
http://forum.xda-developers.com/android/help
Best of luck!
Click to expand...
Click to collapse
Pleaseeeeeeee could you forward this question to the the developer section? I am not yet allowed to ask questions there. I really need your help!
Create the thread in the general q&a section I pointed you to and if there is no response I will forward a link to that thread
Good luck!
demkantor said:
Create the thread in the general q&a section I pointed you to and if there is no response I will forward a link to that thread
Good luck!
Click to expand...
Click to collapse
I posted it for a few days now in the q&a section as you pointed out, still no reply.
Adib254 said:
I posted it for a few days now in the q&a section as you pointed out, still no reply.
Click to expand...
Click to collapse
Done! I'll be closing the thread now
Best of luck
Related
Who can help me to create an update.zip to my phone after OTA file checksum verification uptate without applications?
post OTA update.zip that i want to change updater script.
me gives me two errors when checking the phone's software.
phone manufacturer does not want to upload the full firmware flash.
phone is a yezz andy a5qp
I cannot help you for technical or support, but I can give two guides which can help you:
[TUTORIAL] Create your own UPDATE.ZIP
[GUIDE] Creating Rom Update.zip
Good luck
I do not know how to update the script not to verify checksum
Have you actually read my links ?
because my second link is a guide for creating an update.zip for your rom !!!
I don't understand what you need more ?
I understood that you don't want to verify checksum,
but with these links, you don't verify checksum.
Both links it's for create a simple UPDATE.ZIP to flash on your Android phone, in recovery mode.
I read all about create updater script, but i need help to edit actual updater script. Not create other. Thanks. Please download update.zip and then wait your opinion.
As I've wrote to my 1st answer, this forum is not a support forum, that's why I gave you two links for sending your request for help or more technical infos.
I add some links for other devices, maybe it will helped you:
- [GUIDE] introduction to edify updater script (installer zip)
- Chef Central > Android > [HowTo] Intelligent EDIFY updater-script - (Decides things during flash)
- How to edit an Updater Script to use an Rom as Second System
- [TUT] [for NOOB] editing updater-script for noobs!
I will closed this thread because I've provided you links for more support about your request.
Good luck
This is Boot Logo for XOLO Q800 Device by me
Steps to add this Boot logo to your device.
(Download files from attachments)
1
Root access and recovery mode required (CWM or TWRP)
2
Download the Update.zip file from attachments and place it in your SD card.
3
Flash it using CWM or TWRP recovery
And yes You are Done!! You have the new BOOT logo for your Xolo Q800 Device.
This is my 1st post on Xda I hope you will like it. Thank You
sumitraj said:
This is Boot Logo for XOLO Q800 Device by me
Steps to add this Boot logo to your device.
(Download files from attachments)
1
Root access and recovery mode required (CWM or TWRP)
2
Download the Update.zip file from attachments and place it in your SD card.
3
Flash it using CWM or TWRP recovery
And yes You are Done!! You have the new BOOT logo for your Xolo Q800 Device.
This is my 1st post on Xda I hope you will like it. Thank You
Click to expand...
Click to collapse
Welcome to XDA. Good to see for starters you did this thing but remember you posted this thread in wrong section. Read the rules in case you
aren't familiar with XDA. Rules here : XDA Developer Forum Rules
You should post your works under your device specified section, in case your device doesn't have a specified section post in Miscellaneous Android development section. This Question and Answer section. Remember to post in correct sections from now on. I request Moderator if you're viewing this thread please move it specified place it belongs.
Once again welcome to XDA.:good:
-Regards
Tech N You
I have mtk6572 type device which use ubifs file system for ROM flashing.. I am having its stock ROM which is having system image in ubifs format. I want to edit it . tried kitchen it tries to convert to ext4 partition but explorefs doesn't open saying 'could not find valid super block '. also tried mount process in Linux but to no success. can anyone help me to edit ubifs file image and after that to repack it.
thanks.
Hi,
This thread could shed some light on this maybe...
http://forum.xda-developers.com/showthread.php?t=1863153
Otherwise you can ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
all the methods and commandlines described on your forums to convert the recovery.img to an ODIN flashable .tar or .md5 file simply compresses the .img file itself and puts the .img into the .tar file (so if I open the .tar file with winzip ill see the initial recovery.img I started with inside the .tar file) WHICH in fact is NOT flashable by ODIN please help?
XDA Visitor said:
all the methods and commandlines described on your forums to convert the recovery.img to an ODIN flashable .tar or .md5 file simply compresses the .img file itself and puts the .img into the .tar file (so if I open the .tar file with winzip ill see the initial recovery.img I started with inside the .tar file) WHICH in fact is NOT flashable by ODIN please help?
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Unfortunately I cannot find such a guide under the SII forums. If it was a guide for a different device, there is no guarantee it will work for the SII.
There is a cheater method though, if you have a working system with root. Enable ADB debugging, connect the phone to your PC, fire up adb shell, su, and then dd a copy of the recovery.img on the phone to the recovery partition (sorry I cannot give you the exact path since it varies by model, but it would be along the lines of /dev/block/platform/msm_sdcc.1/by-name/recovery).
To further explore this, or option A (the original thought), please go ahead and create an account. From there, add a post to this thread:
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q&A][SGS2][Newbies][Experienced Users][RCs] New members friendly Q&A thread
Hope this helps, and good luck!
http://www.osbusters.net/2015/11/how-to-port-miui-7-rom-to-qualcomm-smartphones.html
in the above tutorial. on boot.img editing..they hav said to Replace the files boot.img-zImage, boot.img-dtb, boot.img-ramdisk.cpio.gz after extracting the boot.img.
BUt when i extract the boot image using kitchen it only gives me one folder(boot.img-ramdisk) and Zimage FIle and i can't find those above mentioned files..
so i totally replaced the boot.img file..but it makes boot loop.
pls any suggestions to extract the boot.img correctly..
thank you
jo77077 said:
http://www.osbusters.net/2015/11/how-to-port-miui-7-rom-to-qualcomm-smartphones.html
in the above tutorial. on boot.img editing..they hav said to Replace the files boot.img-zImage, boot.img-dtb, boot.img-ramdisk.cpio.gz after extracting the boot.img.
BUt when i extract the boot image using kitchen it only gives me one folder(boot.img-ramdisk) and Zimage FIle and i can't find those above mentioned files..
so i totally replaced the boot.img file..but it makes boot loop.
pls any suggestions to extract the boot.img correctly..
thank you
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
See this thread for unpacking boot.img [TOOL] Boot.img tools [unpack, repack, ramdisk].
You can ask further questions in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist