Database Info

[Q&A][ROM][Jellybean] CNA 3.6.6 for Samsung Infuse [PORT]

Welcome, everyone- this is the place to ask a question about the CNA Jellybean Rom- Port for our Infuse and more importantly hopefully have that question answered.
You may also discuss issues you are having such as can't download, which g apps do I use, getting a FC on xyz ap, and so on.
A few general Q & A's you may find helpful:
Q: What is CNA ? Any screenshot and more info?
A: Code Name Android info here: http://codenameandroid.com
Q: Where can I download this?
A: Info is in the OP, or you can go here: http://goo.im/devs/Th3Bill/CNA/Infuse
Q: After flashing or using for extended periods my phone seems a bit slow- what to do to make it faster?
A: The test build for this port ( and MIUI v4) was done on my phone since Th3Bill (OP) does not have an Infuse. (Think about that for a minute, no Infuse and to date has brought us 2 roms to enjoy )
Four things I have done that work for me to make the phone faster: 1. Update Superuser ( if applicable.) 2. Choose a static (still) wallpaper rather than a live wallpaper. 3. In developer settings, change animation /transition to "off" or "0". 4.Use the app of your choice to clean up the phone, I use Cachemate.
One other tip for better battery life - this rom will let you download and use CM 10 themes. Using one that has darker backgrounds throughout uses less battery than themes using a lot of light colors.
OK - it's all yours !! I will help as best I can, Th3Bill has a link to this page and will be checking in as often as he can - you will find he is involved and supportive and there will be updates as new things are pushed to source. Regards.

Thanks for the start of the Q&A. Let me be the first then...
I am coming from Scott's CM10, do I just wipe, wipe, wipe and reflash or do I need to Heimdall (maybe with ICS) back first then flash the CNA ROM?
Which GAPPS do you recommend?

psal217050 said:
Thanks for the start of the Q&A. Let me be the first then...
I am coming from Scott's CM10, do I just wipe, wipe, wipe and reflash or do I need to Heimdall (maybe with ICS) back first then flash the CNA ROM?
Which GAPPS do you recommend?
Click to expand...
Click to collapse
You are correct, should be able to wipe x3 and flash - one person also "fixed Permissions" to clear a FC issue.
Edit; I used the 7/26/2012 g apps, you might need to get the gallery2.apk

Here is what I used for gapps. Works just fine. v3
http://www.jokersax.com/developer-pages/jokersax/cm10-gapps/

Wiped/factory reset a couple of times, wipe cache, wipe Dalvik, another factory reset, flashed CNA ROM, flashed jellygapps v3, fixed permissions, rebooted, rebooted again and have an X, then
USB Mass Storage Toggle
App info: http://forum.xda-developers.com/showthread.php?t=1389375.
Usage: Tap on the Droid to switch UMS mode.
Tapped Droid but I cannot connect to this PC (work PC). I have to wait to I get home. Or suggestions are welcomed.

psal217050 said:
Wiped/factory reset a couple of times, wipe cache, wipe Dalvik, another factory reset, flashed CNA ROM, flashed jellygapps v3, fixed permissions, rebooted, rebooted again and have an X, then
USB Mass Storage Toggle
App info: http://forum.xda-developers.com/showthread.php?t=1389375.
Usage: Tap on the Droid to switch UMS mode.
Tapped Droid but I cannot connect to this PC (work PC). I have to wait to I get home. Or suggestions are welcomed.
Click to expand...
Click to collapse
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.

That's correct. So no big deal, another hour and I will be home and hopefully up and running once I connect there. I will post again with the results.

good Q&A

Pony Express said:
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.
Click to expand...
Click to collapse
Okay, I am home, USB is connected, tapped the Droid, it says UMS is currently enabled. I downloaded the app from the link...
For the devices listed above, the App works like a charm.
•Latest stable version (1.1.4): Download APK (you'll probably want this one!)
Now what? Reboot and flash it?

psal217050 said:
Okay, I am home, USB is connected, tapped the Droid, it says UMS is currently enabled. I downloaded the app from the link...
For the devices listed above, the App works like a charm.
•Latest stable version (1.1.4): Download APK (you'll probably want this one!)
Now what? Reboot and flash it?
Click to expand...
Click to collapse
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:

Pony Express said:
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.
Click to expand...
Click to collapse
Pony Express said:
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:
Click to expand...
Click to collapse
Also tried it with the other file found on the thread (USB mass storage)...neither work.
Finding Update package...
Opening update package...
Installing update...
Installation aborted.
The pix of Droid laying down, check open and a red triangle with exclamation in it showing up.
Log says:
Installation aborted.
I:Can't partition unsafe device: /dev/block/mmcblk0p1
I:Can't format unknow volume: /external_sd
I:Can't partition unsafe device: /dev/block/mmcblk1p1

I suppose the best route would be to start over. There should be no problem coming from Scott's excellent build.
Having said that, try installing a CM9 rom, let it settle in for 5 -10 minutes and reboot, wipes, flash and see if it will boot. Go back later and get the g apps. This is what worked for me. I can tell you that during the install, phone will cut off before making it back to the "reboot system now" screen, however it will restart and take you there so just hit power button to reboot. This rom does take 2-3 times as long to boot for the first time as opposed to other roms.

I'm not so sure you want to flash since they are .apk's
Sent from my SGH-I997 using xda app-developers app
---------- Post added at 04:45 PM ---------- Previous post was at 04:44 PM ----------
Woops, I misunderstood the problem.
Sent from my SGH-I997 using xda app-developers app

Pony Express said:
I suppose the best route would be to start over. There should be no problem coming from Scott's excellent build.
Having said that, try installing a CM9 rom, let it settle in for 5 -10 minutes and reboot, wipes, flash and see if it will boot. Go back later and get the g apps. This is what worked for me. I can tell you that during the install, phone will cut off before making it back to the "reboot system now" screen, however it will restart and take you there so just hit power button to reboot. This rom does take 2-3 times as long to boot for the first time as opposed to other roms.
Click to expand...
Click to collapse
SD card in or out?

Pony Express said:
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:
Click to expand...
Click to collapse
Bill did include the USB Mass Storage Toggle in the build. It should be there when you flash the rom. It was there when I flashed and it works. No additional d/l's were necessary.
Also, I didn't have any of the restarts you mentioned. I had a black screen for about 30 seconds when it went to the new CWM and then a black screen for about 30 more seconds when it rebooted to the Nexus X.
I did think I had problems because it stayed on the Nexus X screen for about 5 minutes before it booted up to the lock screen.
Edit: Also it booted itself to the Nexus 7 screen without asking after installing the rom package. Had to go back in and add the gapps.

psal217050 said:
SD card in or out?
Click to expand...
Click to collapse
I always leave my SD card in... no problems for me so far.

dparrothead1 said:
Bill did include the USB Mass Storage Toggle in the build. It should be there when you flash the rom. It was there when I flashed and it works. No additional d/l's were necessary.
Also, I didn't have any of the restarts you mentioned. I had a black screen for about 30 seconds when it went to the new CWM and then a black screen for about 30 more seconds when it rebooted to the Nexus X.
I did think I had problems because it stayed on the Nexus X screen for about 5 minutes before it booted up to the lock screen.
Click to expand...
Click to collapse
Thanks, man. That is exactly the way the install should go.

Pony Express said:
I always leave my SD card in... no problems for me so far.
Click to expand...
Click to collapse
+1 for leaving the SD card in....never take mine out when flashing.

is 720 recording fixed, or is it still recording a bit choppy?

SMiGGs said:
is 720 recording fixed, or is it still recording a bit choppy?
Click to expand...
Click to collapse
It is still a little choppy.

Post the issues found in the Android 4.0.4 (ICS)....

Its real nice to have ICS finally for Galaxy R, But we have found some issues.
List of Issues:
1. MMC_CAP_ERASE is enabled by default (eMMC brick bug).
2. Only Tegra optimized Games are working fine, Other Games are lagging a lot (eg: Temple Run).
3. Pinch to zoom in gallery is lagging.

Hold and drag simply doesn't work. First I thought it was a bug in the TW-launcher, but tried with Apex and the same issue is present. I'm trying to solve this with my kernel.

Adam77Root said:
Hold and drag simply doesn't work. First I thought it was a bug in the TW-launcher, but tried with Apex and the same issue is present. I'm trying to solve this with my kernel.
Click to expand...
Click to collapse
Isn't that related to android framework only? How can it be related to the kernel?

Adam77Root said:
Hold and drag simply doesn't work. First I thought it was a bug in the TW-launcher, but tried with Apex and the same issue is present. I'm trying to solve this with my kernel.
Click to expand...
Click to collapse
Wow great news buddy, so you have started working on custom kernel :good:....
All the best man....

i have no issues till now
everything going smooth
battery even holding more longer much more

mj.vikram said:
2. ICS RAM hungry, so battery drain is bit fast compared to GB.....
Click to expand...
Click to collapse
Yes its RAM usage causes bit more battery drain. But jus wan to iterate the importance of Factory reset for ICS update. Without a Factory reset, the upgrade may FC of some of apps. Apart it wil cause a lot of battery drain too. So always do a factory reset before this upgrade from GB to ICS (It will clear the older battery stats file). Also, at the initial stages, there will be some battery issues as the system will be building the battery stats file. With few days, the battery will be back to normal.

When pushing the screen 2 seconds in xda app (just to reply or say thanks) the screen gets black and unresponsive.
And my baseband is I9103NELA1,is it ok?

mj.vikram said:
Its real nice finally to ICS on my phone, But i have found some issues.
So we will use this thread to discuss the Issues related to ICS, i will update the OP ....
1. When mobile is charging Time and Battery % are not updating on the Lock screen.
2. ICS RAM hungry, so battery drain is bit fast compared to GB.....
Click to expand...
Click to collapse
Hey Vikram,
On my device the Time & Battery is changing fine & still by the time not much battery had drain mine currently rooted with RootRecovery_v4.

mj.vikram said:
Wow great news buddy, so you have started working on custom kernel :good:....
All the best man....
Click to expand...
Click to collapse
I tried with my kernel that I created approx. a week ago for JB. It doesn't work (as I expected) because of the framebuffer changes. This is just a beta build and Sam releases src's after official release so we've to wait.

Indha Lezzio said:
When pushing the screen 2 seconds in xda app (just to reply or say thanks) the screen gets black and unresponsive.
And my baseband is I9103NELA1,is it ok?
Click to expand...
Click to collapse
NELA1 is the baseband that came with austrian XWLA4. According to Machram's post it should be XXLQ3. That's because you just restored a nandroid backup and not did a regular installation process which is required to change modem (basedand/radio). (you can flash the modem via cwm or Odin separately) Restoring backups doesn't affect modem, bootloader (this can be crucial sometimes) .. not sure about sales code.

I'm happy to share that I encountered the first SOD. That could be because of too much of install uninstallation while charging. Yes, it is eating RAM but battery backup is good as gb.
Sent from my GT-I9103

vrajan said:
I'm happy to share that I encountered the first SOD. That could be because of too much of install uninstallation while charging. Yes, it is eating RAM but battery backup is good as gb.
Sent from my GT-I9103
Click to expand...
Click to collapse
man from morning i had thrice but its because of high usage i think , i am trying all the apps and thing which i am seeing on XDA.....

Okay, so I noticed that if you enable the motion feature (Samsung's one), then drag&drop works. It's very smooth with TW UX!!! (Will post a CWM-flashable zip in some moments)

Adam77Root said:
Okay, so I noticed that if you enable the motion feature (Samsung's one), then drag&drop works. It's very smooth with TW UX!!! (Will post a CWM-flashable zip in some moments)
Click to expand...
Click to collapse
waiting for your release....

m.kochan10 said:
NELA1 is the baseband that came with austrian XWLA4. According to Machram's post it should be XXLQ3. That's because you just restored a nandroid backup and not did a regular installation process which is required to change modem (basedand/radio). (you can flash the modem via cwm or Odin separately) Restoring backups doesn't affect modem, bootloader (this can be crucial sometimes) .. not sure about sales code.
Click to expand...
Click to collapse
How to restore baseband only buddy..
Sent from my GT-I9103 using xda premium

Sorry for reposting it here again but I really need to know ... I leave for a weekend trip tonight and want to be carrying a stable build. These are the issues I am facing.
1. Lockscreen doesn't work at all.
2. The music kept pausing frequency on my way to office (AUX cable). Will try earphones soon.
3. A 2 sec press on power just restarts the phone and doesn't give the option to set the phone on vibrate (maybe a feature)
4. I am still getting the wrong baseband in About phone ( did anyone flash modem.bin. where is it?)
Maybe I was half asleep when I flashed it. Will flash it again once I reach home. But i did wipe dat and cache

Is hardware accelerated video decoding working confirmed in ics ..?
Anyone tested ..?
How to confirm ..?
In mx player i am not able to play 1080p video..
It is saying hw not possible..
Sent from my GT-I9103 using xda premium

parajsinghal said:
Sorry for reposting it here again but I really need to know ... I leave for a weekend trip tonight and want to be carrying a stable build. These are the issues I am facing.
1. Lockscreen doesn't work at all.
2. The music kept pausing frequency on my way to office (AUX cable). Will try earphones soon.
3. A 2 sec press on power just restarts the phone and doesn't give the option to set the phone on vibrate (maybe a feature)
4. I am still getting the wrong baseband in About phone ( did anyone flash modem.bin. where is it?)
Maybe I was half asleep when I flashed it. Will flash it again once I reach home. But i did wipe dat and cache
Click to expand...
Click to collapse
Hey Buddy you can try with factory reset option before restore the ICS ....

1. ScreenShot for me is not working with Power+Home Combination. Although @Mj.Vikram Confirmed its working fro him.
2. I cannot Mount Phone as USB Storage with/without USB Debugging On. Only MTP mode is connected every time

maheepmaurya said:
1. ScreenShot for me is not working with Power+Home Combination. Although @Mj.Vikram Confirmed its working fro him.
2. I cannot Mount Phone as USB Storage with/without USB Debugging On. Only MTP mode is connected every time
Click to expand...
Click to collapse
Navigate to 'Settings -> Wireless and Networks -> USB utilities' to use it as a USB storage.

[Q&A] CM10.1

A humble request let the development thread be for just development.Just try to keep that one clean and post anything however random(about CM10.1 ofcourse) here.Don't flood the dev thread with about 70 posts regarding black screen problem.
Let this thread be for general questions, comments, discussion, complaints concerning CM10.1 for the Atrix 2.
CM10.1 development thread .
PS: Help the devs in understanding the reason for black screen problem, participate in the poll.
Thanks...
Sent from my MB865 using xda premium

Thanks for creating this thread to keep the dev thread clean.
I got the black screen after I flashed the ROM and the boot logo. How to get past tge black screen? I had to FXZ back to ICS for now. I did a couple of battery pulls but it did not help.
~
Sayantan

Unlock blaxk screen
i cannot unlock after lock using on off button. how to unlock if still black screen? any solution? after i flash gapps camera and gallery fc. it happen when i open camera.

buglist 28/03/13
cLock can't find any location for weather
forfarded call message not work like on scrren from this http://forum.xda-developers.com/showpost.php?p=37850271&postcount=68
and also unavailable change shutter sound and camera save destination.

qwerfv said:
cLock can't find any location for weather
forfarded call message not work like on scrren from this http://forum.xda-developers.com/showpost.php?p=37850271&postcount=68
and also unavailable change shutter sound and camera save destination.
Click to expand...
Click to collapse
+1 for cLock weather issue but honestly I'm so thoroughly impressed with this ROM that I only see that as a minor hitch. I really never thought a fully functional JB would make it to the Atrix! Thank you Devs! :thumbup:
Sent from my SGH-I997 using xda app-developers app

SMONDAL84 said:
Thanks for creating this thread to keep the dev thread clean.
I got the black screen after I flashed the ROM and the boot logo. How to get past tge black screen? I had to FXZ back to ICS for now. I did a couple of battery pulls but it did not help.
~
Sayantan
Click to expand...
Click to collapse
Actually there's no specific reason(at least till now) and hence solution for this black screen bug.Some of the guys who have it have reported to come around it by taking out the battery and rebooting until they get rid of it.But again the number of battery pulls varies from just one time for some to about 40 minutes of battery pull for some others.So can't really say if you tried enough or what else might be the solution.This is the situation as is.
Keep trying or wait till it gets fixed there is really nothing else that you can do at the moment.
Sent from my MB865 using xda premium

Is there a way to keep the capacitive key backlight always on? Didn't spot anything in the main thread about this.

What is with this "♫" symbol?? It's very annoying, ugly, and it's everywhere on this ROM. in instagram, when entering passwords, in descriptions of apps in the playstore.

Loving this so far, but I do have a few concerns. I did make sure to install correctly (CM recovery -> wipe data, flash, reboot, flash gapps), but I'm running into some minor issues.
- My phone seems to be sluggish at times, especially noticeable when turning the screen off and when it vibrates (anything that vibrates twice in a short amount of time). There's a good half-second delay with each of these, much slower than on CM10. Is this normal? Other than that it runs pretty quickly.
- This is the more major issue, the alarm. Everything else in the gapps package works properly except for the alarm function of the clock. When an alarm goes off, there's no popup or anything, and pressing power stops the vibration from the alarm, but it doesn't actually turn the sound off. I have to kill the Alarm Klaxon service to shut it off. Any idea what could be causing this? I haven't heard of anyone else with this bug yet.

Will try flashing once again with BMM this time..
deveshmanish said:
Actually there's no specific reason(at least till now) and hence solution for this black screen bug.Some of the guys who have it have reported to come around it by taking out the battery and rebooting until they get rid of it.But again the number of battery pulls varies from just one time for some to about 40 minutes of battery pull for some others.So can't really say if you tried enough or what else might be the solution.This is the situation as is.
Keep trying or wait till it gets fixed there is really nothing else that you can do at the moment.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Will try with BMM this time along with the patch. Fingers crossed! (I went through the threads and it appeared that people with BMM probably had a greater success rate with installing in the 3rd system - getting superstitious now! )
Will update the results.
~

Any one found a way to OC the phone on this ROM ?

After flashing this ROM it is not booting. It is stopped at boot logo and showing black screen. Could any one help in this
Regarding , I am on pa ver2.99
Kernel 3.0.0.8
And please tell me which is the best radio apk for PA2.99
Thanks in advance.
Sent from my MB865 using xda app-developers app

android.reddy143 said:
After flashing this ROM it is not booting. It is stopped at boot logo and showing black screen. Could any one help in this
Regarding , I am on pa ver2.99
Kernel 3.0.0.8
And please tell me which is the best radio apk for PA2.99
Thanks in advance.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Enter cm recovery select custom recovery and again flash the rom
Sent from my MB865 using xda premium

any of you guys have problem cannot transfer files through usb? mine, when i connect click turn on USB storage, it just loading and loading and just loading.:crying:

Need help flashing the 4.2.2 ROM
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.

ozzman77 said:
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.
Click to expand...
Click to collapse
If you are new to flashing ROM's stay away from this because currently a lot of users face black screen issues etc. Also it should not be installed over JB base as well. Read the entire thread from post one till current and you will see for yourself as it will enlighten you on a lot of aspects what people have already tried & which may save you from heartburn. JB gives a great user experience, enjoy it for a while & then get on the bandwagon when you are more of a informed user.

ozzman77 said:
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.
Click to expand...
Click to collapse
I agree go for CM10 instead it's been pretty stable.
Sent from my MB865 using xda premium

It's in vain, he already flashed CM 10.1 & now he posted in the black screen thread.

Did get hit by the Black Screen Bug
RAD7 said:
If you are new to flashing ROM's stay away from this because currently a lot of users face black screen issues etc. Also it should not be installed over JB base as well. Read the entire thread from post one till current and you will see for yourself as it will enlighten you on a lot of aspects what people have already tried & which may save you from heartburn. JB gives a great user experience, enjoy it for a while & then get on the bandwagon when you are more of a informed user.
Click to expand...
Click to collapse
You were right. I watched the video on flashing ROMS from here https://www.youtube.com/watch?v=kumkZiGbTFI and tried it out. Got the black screen issue when flashing over JB. Then FXZd back to stock ICS and reflashed, but got the same thing again. So i'm back on ICS now. I suppose i'll upgrade to JB later and stay there for a while till this thing is sorted out.

Anyone getting YouTube problems.... Freezing... Could not stream at all with March build.
MB865/ATT/BMM
1. Stock 4.0.4
2. Miui
3. Kexec 4.2.2
6. ASOPA 4.2.2

CyanogenMod Install Problems SGH-i727

Rooted fine a SII SGH-i727 samsung AT&T Skyrocket. I edited in-place the file to remove the reference for the phone model (prev. error on installation). Next repacked the zip with changes to the file. All looked good.
Copied files to SD card, rebooted holding vol/power. Able to browse using vol. keys to wipe data/rom, then install zip from SD. Waited a couple min. after no errors presented. Next updated the Google Play installer, waited again a couple just in case.
Turned off, then on, sits on CyanogenMod spinning circle forever and a day. Originally 25 min., then said OK, WTH?
Rebooted again, holding power down, then on, same just sitting there issue.
OK.... Repeated procedure again, wipe, this time did the davik and cache wipe, then installed zip, then Google. Reboot, STILL sits there on spinning circle for boot.
I don't get it. Several posts on this, but I redo, and get same results - insanity is setting in... Please advise, someone
I have my own computer repair business, but not as versed in Android/phones, at least to the OS/ROM level.

kmook said:
Rooted fine a SII SGH-i727 samsung AT&T Skyrocket. I edited in-place the file to remove the reference for the phone model (prev. error on installation). Next repacked the zip with changes to the file. All looked good.
Copied files to SD card, rebooted holding vol/power. Able to browse using vol. keys to wipe data/rom, then install zip from SD. Waited a couple min. after no errors presented. Next updated the Google Play installer, waited again a couple just in case.
Turned off, then on, sits on CyanogenMod spinning circle forever and a day. Originally 25 min., then said OK, WTH?
Rebooted again, holding power down, then on, same just sitting there issue.
OK.... Repeated procedure again, wipe, this time did the davik and cache wipe, then installed zip, then Google. Reboot, STILL sits there on spinning circle for boot.
I don't get it. Several posts on this, but I redo, and get same results - insanity is setting in... Please advise, someone
I have my own computer repair business, but not as versed in Android/phones, at least to the OS/ROM level.
Click to expand...
Click to collapse
I'm using the clockworkmod, v5.0.2.6, Gapps 4.2.2, and CM-10.1.2-skyrocket.zip

Make sure you have twrp 2.5 or 2.6 (ditch cwm , it's buggy for JB and modern roms)
Make sure you're radio is JB friendly i.e. UCMC1 or UXUMA7
Copy cm10 zip and google apps zips to your sd,int or ext doesn't matter
Reboot to recovery
Wipe system,data,cache,dalvik,preload,android secure (do twice,doesn't hurt and maybe better)
Install(flash) cm10.1.2
Install(flash) Google apps
Reboot system
Notes:
1.Search , as this (and related issues) been discussed Gazillion times
2.Do exactly as above
3.Be specific when describing problems , your post is like an app log !
4.There's a dedicated cm10 thread in general forum..

mahanddeem said:
Make sure you have twrp 2.5 or 2.6 (ditch cwm , it's buggy for JB and modern roms)
Make sure you're radio is JB friendly i.e. UCMC1 or UXUMA7
Copy cm10 zip and google apps zips to your sd,int or ext doesn't matter
Reboot to recovery
Wipe system,data,cache,dalvik,preload,android secure (do twice,doesn't hurt and maybe better)
Install(flash) cm10.1.2
Install(flash) Google apps
Reboot system
Notes:
1.Search , as this (and related issues) been discussed Gazillion times
2.Do exactly as above
3.Be specific when describing problems , your post is like an app log !
4.There's a dedicated cm10 thread in general forum..
Click to expand...
Click to collapse
WOW, THANK YOU!
It was the ther ROM writer that was the helper, TWRP! Didn't think that pgm was compatible with my phone, but found that it was, and it did the trick! Now I can go to bed, thanks again :highfive:

kmook said:
WOW, THANK YOU!
It was the ther ROM writer that was the helper, TWRP! Didn't think that pgm was compatible with my phone, but found that it was, and it did the trick! Now I can go to bed, thanks again :highfive:
Click to expand...
Click to collapse
Push the thanks button for him.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta

Now reboots on phone calls!
OK, great, now it's working, but it reboots on making an outgoing phone call. Isn't the phone functionality the most important part?

kmook said:
OK, great, now it's working, but it reboots on making an outgoing phone call. Isn't the phone functionality the most important part?
Click to expand...
Click to collapse
No one else is reporting this. It's user error. Start over and follow the instructions.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta

kmook said:
OK, great, now it's working, but it reboots on making an outgoing phone call. Isn't the phone functionality the most important part?
Click to expand...
Click to collapse
Found that it reboots while Google Voice is installed --- and activated to make calls using GV.
If I turn off that feature in GV, the call will attempt to go through, no reboots. Enable making all calls through GV, phone reboots!

nistocus sorrow
xcrazydx said:
No one else is reporting this. It's user error. Start over and follow the instructions.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah, thanks for that helpful hint --- read my other reply about this topic. :cyclops:
Found that it is the Google Voice App, when enabled on all calls, it reboots. Just found out now that when it's set to ASK, and I attempt to make a call, the call went through, without rebooting.

kmook said:
Yeah, thanks for that helpful hint --- read my other reply about this topic. :cyclops:
Found that it is the Google Voice App, when enabled on all calls, it reboots. Just found out now that when it's set to ASK, and I attempt to make a call, the call went through, without rebooting.
Click to expand...
Click to collapse
No problem, glad I could help!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta

Newest OTA.... is the lag over?

Should I bother updating?
Does Chrome finally work as it should?

Yes after one day testing ...
Sent from my SHIELD Tablet using XDA Free mobile app

So far so good after 3 hours.
Sent from my SHIELD Tablet using XDA Free mobile app

There has been a marked increase in stability and responsiveness for me.

And battery life in standby seems better as well (so far)!
Sent from my SHIELD Tablet using XDA Free mobile app

allright. So I'll pull the plunge on this one.
TWRP and the regular update process don't seem to work. So square one from what it seems

sQeetz said:
allright. So I'll pull the plunge on this one.
TWRP and the regular update process don't seem to work. So square one from what it seems
Click to expand...
Click to collapse
I updated with theOTA from this post http://forum.xda-developers.com/shield-tablet/general/android-5-1-t3115536 just download the ota and supersu from that link and flash the OTA first then supersu and your done. I didnt even lose recovery after i flashed these!
Oh yeah and I used google sheets and docs for 4 hours this morning without a single freeze or crash normally i would've had at least 10 during that time. So yes its def. worth it.

So far.... I installed about 3 hours after release, it's much much smoother. Only once have I gotten the "what the frig is this thing doing" hang and sputter, while installing busy box. Colors are great. It's like flashing a new screen. Xposed super alpha for 5.1 working. Gravity box works, flat style colored bars works.
Now just waiting for custom kernels....

Depends. Update 3.0 has these issues:
1- Apps optimization on every reboot. (rebooting takes 5 or more minutes)
2- USB OTG not working (tried usb flash drives and nothing)
3- Controller not turning off when button pressed (by design)
I was on 5.0.1 rooted, I wiped everything, flashed 5.1 and rooted again, if you are wondering.

NaminatoR1254jaime.sier said:
Depends. Update 3.0 has these issues:
1- Apps optimization on every reboot. (rebooting takes 5 or more minutes)
2- USB OTG not working (tried usb flash drives and nothing)
3- Controller not turning off when button pressed (by design)
I was on 5.0.1 rooted, I wiped everything, flashed 5.1 and rooted again, if you are wondering.
Click to expand...
Click to collapse
Something may have gone wrong. I've only had the optimization come up if I clear cache or install apps via recovery so far... And I've been trying to get it to crash at reboot....

Judging from the responses in this thread, it looks like it's finally time for me to unlock my bootloader and update from 4.4. Wish me luck, guys!

Pariahnoble said:
Something may have gone wrong. I've only had the optimization come up if I clear cache or install apps via recovery so far... And I've been trying to get it to crash at reboot....
Click to expand...
Click to collapse
I've had it come up on several reboots. Many people report it too on the official Nvidia forums.
But the USB OTG thing did it, Im staying on 2.2.1 until a hotfix is released.

I stand corrected, =x I have 2 apps optimizing at boot.

No problems here
I installed ota 3.0 from twrp after wiping everything including internal memory and I have no problems....
No app optimizations after every reboot or havent encountered any lags or sound glitches + wifi performance is much better and no issues with hdmi or usb otg either, played half life 2 for like 2.5 hours straight and had no issues even for a second...
Don't now what happened with the people who are having problems with this update. I have 32gb lte version and the tab performance is perfect now, for me atleast.
So i would suggest wiping everything except external sdcard and flashing full rom + latest supersu

USB OTG is working for me. I can use my 8GB drive.

I also have the Apps optimizing at every boot bug. 189 of them nonetheless... So the wait is huge.
Full OTA dirty flash over previous 2.2.1, dalvik/cache wipe. I hope for a fix soon.

Wipe everything then install full rom, i am pretty sure u wont get apps optimizing every boot. For me after the update the boot cycles are the fastest yet and I also do have around 180 apps...

Sarge29490 said:
Wipe everything then install full rom, i am pretty sure u wont get apps optimizing every boot. For me after the update the boot cycles are the fastest yet and I also do have around 180 apps...
Click to expand...
Click to collapse
I wiped everything except internal and external storage, I rooted and I still had the optimizing apps every reboot. And not just 2 or 3 apps, all of them.

NaminatoR1254jaime.sier said:
I wiped everything except internal and external storage, I rooted and I still had the optimizing apps every reboot. And not just 2 or 3 apps, all of them.
Click to expand...
Click to collapse
Well the only difference now is i wiped internal storage too and i have no idea if this helps but i have selinux mode set to permissive, if this doesnt work then i guess i am one of the lucky ones...

I also found that the speakers has a screeching irritating sounds when playing media on my wifi version.
Anybody else having the same problem?