Because of where i work i had to remove the cameras from my shiny new droid maxx. Front camera completely removed rear drilled out and filled with jb weld. My question is there a way i can still use the camera led as a flash light none of the play store apps seem to have a work around since my cameras are missing.
Phone is stock and unrooted
Take a look at the F-Droid repository. There are a few flashlight apps there that might not be on the play store which could work for you.
I have tried several, but would recommend one of these three:
Motorola Droidlight - First party, so it shouldn't need root. Ugly app. Works.
j4velin Notification Toggle - Puts a toolbar into your notification tray. Mine toggles rotation lock, flashlight, music, mobile data, and reboot. Some features may need root.
farproc Powerful Control - Puts widgets on your homescreen. Lots of settings for size/colour/choice of buttons. You can set how long the light stays on. I use a 1x1 toggle button on my main screen.
[edit: Wait, why did you "drill out" the back camera? It unplugs from the mainboard just like the front one. ]
Thanks both of you but neither one of your options work. I think it's because they all need camera permission
Related
On my other devices (which run AOSP kitkat roms), I can access my camera with my pattern lock still enabled. All I do is swipe the pattern to the left, and the camera UI opens. It allows me to take new photos, and review them, but doesn't allow me to access any photos that were taken before the screen locked (i.e. it's not a backdoor to get past the lock and look at all my pictures). I always loved this functionality.
On my vzw M8, I cannot replicate this functionality. If I swipe in the same way, I just get a blank page where a widget can be added. Looking through the available widget options, I don't see anything for the camera. I even installed Google Camera just to see if that would make any difference, but no.
I know that the M8's gesture functionality allows something very similar (long-press vol-down while screen is off to launch directly into camera). I'd love to use this, but the gestures are all-or-none. Since I find the other gestures problematic (double-tap to wake, for example), I have all my gestures disabled.
So is there currently a way to replicate the AOSP locked-camera functionality on this device? Or do I simply have to wait for an AOSP rom?
For what it's worth, I'm running Skyfall 1.3
EDIT - story of my life... I figure something out just a few seconds after asking a question, even though I've been trying to figure it out for days.
Turns out I can swipe down (i.e. to hide the pattern lock), which causes the camera icon to appear at the lower-right corner. Then I just need to swipe up on that icon.
Nice work, Byron
Never mind. Didn't read your post close enough I guess. I see you know about the gestures.
Is there any way to change the camera app which is launched when the circle gesture is drawn on the screen while the phone is in sleep mode? Mine just goes straight to the stock Cyanogen camera app, i want to change it to Camera FV-5. Does anyone know how to do this?
Go to apps, all apps, then go to camera and clear defaults. Then lock screen and draw your circle and tell it which one to choose.
Can't say it will work with any camera app but I have the option between the three that I have installed on which one launches when I draw circle
Hopefully Essential takes some user feedback as far as features we would like to see going forward. If you post please try to keep it to reasonable features that mostly stock devices have or non os software tweaks.
The two big ones for me are
1. Night mode
2. Fingerprint shortcuts, primarily for notifications
tw1tch175 said:
1. Night mode
Click to expand...
Click to collapse
+1
Damn just checked and realized no night mode since got the phone just today.
+1 on night mode, that thing is must have at system level. Don't want to go back to using apps like twilight etc
My needs are simple. Would like the option to rearrange navigation buttons, battery percentage, and finger print gestures.
Sent from my PH-1 using Tapatalk
Has anyone tried enabling night mode by enabling the UI tuner?. night mode is built into nougat but on some phones still has to be turned on. I don't have the phone yet to do it. Pull down the notification shade twice and then long press the settings cog icon. A wrench will show up next to the icon indicating that UI tuner has been enabled. Next install "night mode enabler" from the play store.
Unlocked bootloader, TWRP and root. Hopefully. ? - Not sure any devs are on board with this device.
I haven't received the phone yet, but does it support gestures while the screen is off? Such as double tap to wake, swipe up to unlock, etc.
Night mode is nice. I also like to separate ring volume from notification volume. I know that's not native to Android, but a simple mod makes all the difference for me.
Sent from my PH-1 using Tapatalk
Night mode for sure. Second would be system level to force apps to use the full screen, like what Samsung has for the s8+
hx3 said:
Unlocked bootloader, TWRP and root. Hopefully. ? - Not sure any devs are on board with this device.
I haven't received the phone yet, but does it support gestures while the screen is off? Such as double tap to wake, swipe up to unlock, etc.
Click to expand...
Click to collapse
Yep.
I'm waiting for TWRP.
For root, I plan to use Magisk to root and hide BL status. Since it's mostly ASOP, it should work like the Nexus 6P I have.
First off +1 to both, I really don't want to use the app that allows finger gestures, was a little sad to see it not available in stock Android since I got used to using it on the Pixel XL.
barleysoda said:
Has anyone tried enabling night mode by enabling the UI tuner?. night mode is built into nougat but on some phones still has to be turned on. I don't have the phone yet to do it. Pull down the notification shade twice and then long press the settings cog icon. A wrench will show up next to the icon indicating that UI tuner has been enabled. Next install "night mode enabler" from the play store.
Click to expand...
Click to collapse
Just tried it and it isn't there sadly. Just like the fingerprint gestures I don't want to have to add it through an app.
On the flip side I got exactly what I deserved/wanted. Nothing but pure Android (minus the Essential Cam app and the Essential option in the settings) so that was good but in a way I want to kick myself because I forgot that these two features were add ons to the skin for the Pixel devices. Whatever the case maybe, I'll get over it lol.
ability to change navigation buttons
Ghost_1 said:
First off +1 to both, I really don't want to use the app that allows finger gestures, was a little sad to see it not available in stock Android since I got used to using it on the Pixel XL.
Just tried it and it isn't there sadly. Just like the fingerprint gestures I don't want to have to add it through an app.
On the flip side I got exactly what I deserved/wanted. Nothing but pure Android (minus the Essential Cam app and the Essential option in the settings) so that was good but in a way I want to kick myself because I forgot that these two features were add ons to the skin for the Pixel devices. Whatever the case maybe, I'll get over it lol.
Click to expand...
Click to collapse
Hopefully those features, switching navigation buttons and more will come to the table once we get the bootloader unlocked and the possibility of custom ROM's/mods. Keeping my fingers crossed.
bricky23 said:
My needs are simple. Would like the option to rearrange navigation buttons, battery percentage, and finger print gestures.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
tsquare2112 said:
ability to change navigation buttons
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=xyz.paphonb.systemuituner&hl=en
Use this to change nav bar.
For battery percentage just enable the UI tuner
1. Changing audio track with volume buttons when screen is off.
2. Resizing nav bar height
3. Double tap to wake
I second the fingerprint gestures and double tap to wake wholeheartedly.
Would also love to see these:
1. Ability to use Light Flow or another LED manager to customize notification LEDs. This is my favorite thing about Android phones and Essential's stock LED patterns aren't cutting it for me. Somehow they managed to make it impossible for the LED to flash more than once every 5 seconds.
2. Ability to use 360 camera attachment as a fisheye lens. Currently the camera stitches two 210 images together to form a 360 photo. I want to be able to choose just one lens to capture an image.
bricky23 said:
My needs are simple. Would like the option to rearrange navigation buttons, battery percentage, and finger print gestures.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
The battery percentage option is in the system ui tuner I believe. Pull down the notification shade and long press on the settings icon then go into settings and look for it.
ability to change navbar height. it's too big uses unnecessary screen estate
There are several Improvements I would like to see in the phones software. More so just general optimization. However I think that most of these answers of what features are coming will be answered in Thursday's Q&A session with Andy Rubin on Reddit. So I guess we should wait until then to see where Essential and the ph1 is headed.
I'm not sure how possible it is to have this implimented, but when using a third party app such as Instagram or Snapchat, you're limited to the main sensor.
When the camera is active in an app, what if you could use the 3 state alert slider to change the cameras depending on the position?
Bottom, wide angle, middle main sensor and top telephoto. A sort of zoom control.
If your camera2api is exposed, you can access all of those camera on third party app
Only LG does this
I like the idea of being able to switch between cameras in third-party apps, but not so much a fan of how you would want it to happen.
Alert slider is pretty stiff so for me it would be annoying to have to physically move it every time I wanted to switch cameras.
Also, what would happen with sound modes? If the slider is in the middle position, would you end up in vibrate mode when you leave the app?
I'd rather have either on-screen options like the stock camera does, or some kind of on-screen gesture(s) in the viewfinder.
Just my two cents!
Original Thread : https://forum.xda-developers.com/oneplus-6t/themes/app-amoled-notification-light-t3943715
So I was annoyed not having an LED notification light on oneplus 6t so I tried to make one of my own.
As OP6T has amoled display whenever a desired notification comes the app brings in a black screen with notification LED looking animation.
Though this is tested on OP6T, it should be working for most Android Oreo and later phones.
To use it:
Install App.
Disable Ambient Display and any battery optimisation for the app.
Give notification access permission.
Select apps you want notifications for, by choosing a color (Only apps you set a color to enables LEDs).
Note: 1. On successfully selecting a color for an app the text in which the App name is written should change to that color
2. Don't enable the LED for the "Phone App" as it will interfere when an incoming call is coming! Will fix this in next build
Thats it.
Note: To turn off the LED and to unlock phone double tap anywhere on the screen.
Also on pressing power button once the LED stops and on pressing it again it will bring you to lock screen.
App now available on Play Store, please rate and share if you liked the app.
Play Store Link: https://play.google.com/store/apps/details?id=com.xander.android.notifybuddy
Working Video: https://youtu.be/vFKiHS_ZD-k
If the app is not working check whether the Notification Service is running under Developer Option > Running Services, this service is required for the app to work as intended.
If it is not running after various troubleshoot measures, maybe send the logs.
Changelog:
Implemented burn in protection
Fixed proximity sensor bug
Switch enables LED with default color
Added search functionality
Now App list is sorted in alphabetical order
Fixed power button
Added settings for changing time interval and stop timer
Major bug fixes
Added System Apps
Added a switch to turn on/off notification LED
Give your feedback!!
It would be cooller if it would use the edge lighting.
Great app, love the simplicity.
Is there any way to show the notification first (like stock configuration) and then show the flashing "LED" after a few seconds?
Nice app. Been using since release when I saw it on the OnePlus 6t forum. Only issue is when you dismiss the notification (double tap) , screen goes into full brightness first before dimming down. At night, it's hard on the eyes. Hope you can fix it (add auto brightness support so it follows the screens brightness after unlock). Cheers mate and keep up the good work.
Good to see your thread here for OnePlus 7 Pro! Cheers
working thx ?
cut u get it to work wiht eged light??
Nice! It working good!
"Is there any way to show the notification first (like stock configuration) and then show the flashing "LED" after a few seconds?"..also my question..
Sometimes the LED flashes even if there is no notification
This is AWESOME!!! Could you make it so that
1: It doesn't flash the white bar across the bottom first
2: not go full brightness?
Thanks
This is an awesome app. Would be amazing if you can use it with the edge lighting.
Brilliant, thank you. Gome through countless apks trying to get a notification led. Thanks
Oh, one more thing, would it be possible to add an on/off switch so you can easily turn it off if you don't want to use it?
marjanoos said:
It would be cooller if it would use the edge lighting.
Click to expand...
Click to collapse
you can use the app always on edge if you want customized edge lighting
Nice idea and nice app but would it be possible to get it to work together with ambient display enabled?
HarshBoy99 said:
Original Thread : https://forum.xda-developers.com/oneplus-6t/themes/app-amoled-notification-light-t3943715
So I was annoyed not having an LED notification light on oneplus 6t so I tried to make one of my own.
As OP6T has amoled display whenever a desired notification comes the app brings in a black screen with notification LED looking animation.
Though this is tested on OP6T, it should be working for most Android Oreo and later phones.
To use it:
Install App.
Disable Ambient Display and any battery optimisation for the app.
Give notification access permission.
Select apps you want notifications for, by choosing a color (Only apps you set a color to enables LEDs).
Note: 1. On successfully selecting a color for an app the text in which the App name is written should change to that color
2. Don't enable the LED for the "Phone App" as it will interfere when an incoming call is coming! Will fix this in next build
Thats it.
Note: To turn off the LED and to unlock phone double tap anywhere on the screen.
Also on pressing power button once the LED stops and on pressing it again it will bring you to lock screen.
App now available on Play Store, please rate and share if you liked the app.
Play Store Link: https://play.google.com/store/apps/details?id=com.xander.android.notifybuddy
Working Video: https://youtu.be/vFKiHS_ZD-k
If the app is not working check whether the Notification Service is running under Developer Option > Running Services, this service is required for the app to work as intended.
If it is not running after various troubleshoot measures, maybe send the logs.
Changelog:
Implemented burn in protection
Fixed proximity sensor bug
Switch enables LED with default color
Added search functionality
Now App list is sorted in alphabetical order
Fixed power button
Added settings for changing time interval and stop timer
Major bug fixes
Added System Apps
Added a switch to turn on/off notification LED
Give your feedback!!
Click to expand...
Click to collapse
How about light during charging? Can I enable it?
knives of ice said:
you can use the app always on edge if you want customized edge lighting
Click to expand...
Click to collapse
I don't want to customize edge lighting. I just want to make it work as notification.
iaTa said:
Great app, love the simplicity.
Is there any way to show the notification first (like stock configuration) and then show the flashing "LED" after a few seconds?
Click to expand...
Click to collapse
I second this please.
marjanoos said:
I don't want to customize edge lighting. I just want to make it work as notification.
Click to expand...
Click to collapse
thats exactly what the app does. it lights up the edges of your phone for a notification and you can customize each color per app, etc.
knives of ice said:
thats exactly what the app does. it lights up the edges of your phone for a notification and you can customize each color per app, etc.
Click to expand...
Click to collapse
Really? Mine doesn't. It just gives the blinking led at the top of the screen. Where's the settings to turn that function on please?
hallo dare said:
Really? Mine doesn't. It just gives the blinking led at the top of the screen. Where's the settings to turn that function on please?
Click to expand...
Click to collapse
i'm talking about the app ALWAYS ON EDGE in the play store, which is the app i recommended because the poster i quoted asked for that function. so yes, the app always on edge in the play store will do what you want as well. it has a ton of options in the settings.
i also used this one notifybuddy
but went back to picel pulse untill this one support missed call's
pixel pulse works with orginal notification system