Is there anyway I can put my device into fastboot? If I get into fastboot how can I flash a recovery.img?
pokechat8978 said:
Is there anyway I can put my device into fastboot? If I get into fastboot how can I flash a recovery.img?
Click to expand...
Click to collapse
For fastboot mode press HOME + POWER UP buttons simultaneously. You can flash recovery with LG MDP tool.
Related
Hi.
My tablet is ASUS Transformer Pad TF303cl.
After doing of the following tasks, Asus logo appears but boot animation doesn't but rather screen becomes black and turns on and off continually.
fastboot erase config
fastboot erase cache
fastboot erase firmware
fastboot erase ADF
fastboot erase factory
fastboot erase vendor
fastboot reboot
Because it is possible to go to fastboot mode, I did factory reset and reflashed stock firmware by 'fastboot flash update UL-K014-WW-11.4.1.34-user.zip', but my problem has not resolved.
What's the matter? Is my tf303cl tablet bricked? What can I do?
Any suggestion?
Can any one help or guide me?
TF303CL
Did u manage do anything? I'm in the same boat.
zuke74 said:
Did u manage do anything? I'm in the same boat.
Click to expand...
Click to collapse
Me too
Please share the method, if you have succeeded!
omlas01 said:
Me too
Please share the method, if you have succeeded!
Click to expand...
Click to collapse
Solution:
Asus Flash tool + RAW firmware:
filesrom[change this to dot]com/collection-asus-stock-raw-firmware
My method:
Install Asus Flash Tool (and adb, bootloader, ... if necessary)
download RAW firmware
boot into recovery (hold volume up + power for 2-3 secs)
Flash the firmware with AFT
What do i need to type in cmd with fastboot to ogo into recovery? i mean my power button is broken and i just turn it on by using volume button down and plugging in to a computer.
i tried fastboot reboot recovery, doesnt seem to work.
fastboot boot <twrp.img file>
it will boot directly into twrp
if u r stuck in fastboot mode even when holding vol+ button and inserting cable can,t get u in download mode for LGUP this is for u just put these command in fastboot
fastboot erase recovery
fastboot erase laf
fastboot flash laf laf.img
fastboot reboot
laf.img is attached
https://drive.google.com/open?id=1H-593RrIDJmjOSLbAnGSdw_p1b8PgSph
mind_hunter said:
if u r stuck in fastboot mode even when holding vol+ button and inserting cable can,t get u in download mode for LGUP this is for u just put these command in fastboot
fastboot erase recovery
fastboot erase laf
fastboot flash laf laf.img
fastboot reboot
laf.img is attached
https://drive.google.com/open?id=1H-593RrIDJmjOSLbAnGSdw_p1b8PgSph
Click to expand...
Click to collapse
Vol- plug in USB is fastboot mode.
Vol+ plug in cable is download mode.
If you stuck in fastboot mode to get into download mode:
(Hold vol-, power, vol+ all 3 together until phone goes blank immediately release vol- and power keep holding vol+ it should boot into download mode )
doesnot work for me faild cannot erase this partation in unlocked state
doesn't work it says my phone doesnt pass a safety check and not will boot, and after that goes to fastboot
After unlocking the bootloader LG G7 run Android 10 by QFIL, I got stuck in fastboot. I consulted many sites but could not find what I needed.
I would like to share some of my experiences after I have successfully fixed them.
Once you have unlocked the bootloader you have illegally modified your phone. When something goes wrong, the phone automatically stops at fastboot. If you want it to continue, you need to load the magisk patched boot.img.
The boot.img can be extracted from your kdz rom file and you can make the patched boot.img by magisk app on the other phone and flash to the boot_a and boot_b partition by QFIL
After successfully boot your phone with magisk patched boot.img, you must use LG Bridge to refurbish your phone (choose Refurbish Option when flashing your rom) to make sure it work fine.
jesus.sea said:
doesn't work it says my phone doesnt pass a safety check and not will boot, and after that goes to fastboot
Click to expand...
Click to collapse
Same!
I want to install a custom rom on my Moto E3 power device. So here's what I have done till now
I have unlocked the bootloader.
Now I press the power button +vol up key to enter into boot options.
Then I go to fastboot mode and try flashing the twrp recovery using the following command
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
fastboot reboot recovery .... just hangs the bootloader
Click to expand...
Click to collapse
This however doesn't flash the existing out-of-the-box useless recovery.
So I tried again with
fastboot boot twrp.img
and
fastboot --c "lge.kcal=0|0|0|x" boot twrp.img
Click to expand...
Click to collapse
These just restart the phone without booting into recovery mode.
Anyway I can get the twrp recovery working on Moto E3 power?
what do i do the phone doesn't boot at all
This command tells the bootloader to immediately boot the image you have sent. It's quite useful if you want to run something without actually flashing it to the boot partition - such as TWRP on devices that don't have a recovery partition, or testing patched boot images.
What do you mean "the phone doesn't boot at all"? What device? What were you trying to do?
Khalyl22 said:
what do i do the phone doesn't boot at all
Click to expand...
Click to collapse
That's okay, you only boot(temporary) into boot.img. Try to press and hold your power button to force reboot
V0latyle said:
This command tells the bootloader to immediately boot the image you have sent. It's quite useful if you want to run something without actually flashing it to the boot partition - such as TWRP on devices that don't have a recovery partition, or testing patched boot images.
What do you mean "the phone doesn't boot at all"? What device? What were you trying to do?
Click to expand...
Click to collapse
Oppo a5s i was trying to flash gsi rom but i started
fastboot erase boot
fastboot erase system
fastboot flash system system.img
fastboot boot boot.img by mistake (i was going to fastboot flash boot boot.img)
and now it keeps vibrating
khusika said:
That's okay, you only boot(temporary) into boot.img. Try to press and hold your power button to force reboot
Click to expand...
Click to collapse
didn't work :'(
Khalyl22 said:
Oppo a5s i was trying to flash gsi rom but i started
fastboot erase boot
fastboot erase system
fastboot flash system system.img
fastboot boot boot.img by mistake (i was going to fastboot flash boot boot.img)
and now it keeps vibrating
Click to expand...
Click to collapse
Have you tried to flash all image again?
fastboot erase command is dangerous and (in most cases) useless. do not follow any tutorial that still suggest this.
khusika said:
Have you tried to flash all image again?
Click to expand...
Click to collapse
i actually found out what happened
i erased boot.img and forgot to flash it again because i wanted to patch the file