Yesterday my One wouldn't boot up so I figured this would be the time to try out Paranoid Android. After flashing and restoring all of my apps and data, I went to open Android Wear and connect to my watch. My phone will connect, but not the Android Wear app? When I start to connect, my phone and watch get a Pair message and I choose pair, my Android Wear app won't connect to my watch although when I go to the Bluetooth menu on my phone it says connected.
But It doesn't say connected on my watch either.
Could anyone help me? My Moto 360 is on Android Wear 4.4W2 and my phone is on Paranoid Android 4.6 Beta 5
Thanks.
Look what you are running
I got moto 360 and OnePlus One and I think it is because the beta build is not supported.
Related
Hi,
I bought the SmartWatch 2 (SW2) and it arrived a week ago.
I have a THL w3 device, with Android 4.0.4 on it(built in; not a custom rom) and rooted.
When it first arrived about a week ago, I tried to connect it again and again and the SW kept displaying the SW->Smart Connect screen. the Smart Connect didn't show that popup window with a link to install the SmartWatch2 app, and even when I installed in manually there was no "edit settings" row in the Smart Connect app.
I tried to connect it to my friend's Motorola Atrix (Jelly Bean, not sure which one) and it worked, and then when I tried again on my phone it seemed to work. I was able to install some applications and even though whenever I turned the SW off and on or the Bluetooth off and on I had to unpair and pair the SW in order to connect it, not to mention that 90% of the times when I paired them there was no pairing request, the phone said it's paired, the SW got stuck on the screen "SW V phone"(connected) but they weren't actually connected.
A few days later, yesterday, I noticed that what i just described only happends when the phone is completely on and ready to use, because if I rebooted my phone and then when it turned on I emiddiatly paired them, it worked and there was a pairing request and everything. but only if I paired them before all the apps were ready, which meant that there was an app that caused the pairing to fail when that app is ready.
I used "Disable Manager"(from the Play store) to disable the Smart Connect app and then I was ablt to pair the phone and the SW properly, only now because the Smart Connect app is disabled I can't use the watch...
I hope I described what happened even though English is not my strongest language...
Summury:
My phone is not fully compatible ith the SW, and the fault is Smart Connect's.
The Motorola Atrix works perfectly with the watch. Is it because of the android version?
If you have any ideas please let me know.
-Reuven
Having trouble understanding, but if the problem is your device's stock rom you could look into trying a custom AOSP rom. Might aswell get something more recent than icecream sandwich. Get on kitkat. Get cyanogenmod 11 and use Gravity box with xposed modules.
Are there any custom mods for my device?
The problem is I couldn't find any custom roms for THL W3. it's not a popular device, and even though I really want a newer version(at least Jelly Bean...) I searched a bit and I didn't find anything.
Is cyanogenmod compatible with every phone? Are you sure that's the problem?
Hi
For the second time in 2 months I have the issue where my watch is not connected in Huawei Health \ Huawei Wear / Google Fit / Wear OS apps but it is fully connected to the phone.
I can confirm the connection as I can still browse the apps and get updates.
Looks like again I have to hard reset my watch as nothing else works.
Did anyone else experience this issue?
Why don't they make an easy way to pair the watch again without having to wipe it all [emoji17].
Sent from my Honor View 10 using Tapatalk
I was having an issue this morning connecting watch to the iphone and phone wasnt detected anywhere. Quick toggle of airplane mode did the trick. Not sure if that would help you. Strange these issues as i thought it should work better on Android that on Ios which i have.
Hi everybody!
I have a Ticwatch E that I'm trying to pair with my new Xiaomi Mi 8, I've been trying for 3 days and I still cannot pair it. This are the steps I execute to pair it:
I open the Wear OS app in my phone
I look for devices and my watch appears
I click on my watch in the device list
(Here comes the problem )
A PIN is shown in my watch, it should be shown in my phone too but it doesn´t. My phone says 'A prompt to connect will appear on this phone' but nothing happens.
After a few seconds of waiting, my phone says "Couldn´t pair with Ticwatch E 299 N, because of an incorrect PIN or passkey"
At first I thought it was a problem with the watch, since my brother has a Ticwatch E and a Xiaomi Mi 8 too and he could make it work in the first attempt, so I tried to pair my watch with his old Samsung Galaxy S7 AND IT WORKED!
After that I tried again the same steps as described at the beginning of the thread with no success, so I proceeded to try connecting it without the Wear OS app. I went to Settiongs -> Bluetooth -> Selected 'Ticwatch E 299 N', and the PIN to connect was showing both on my watch and my phone, I hit 'Pair' and then it got connected. The problem is that my watch says that I should continue the configuration process in my phone but there's no configuration process if I don't pair it with the Wear OS app.
Other things I tried:
- Downloading the Mobvoi app and trying to pair from there (it asks me to open Wear OS, so it's basically the same).
- Downloading multiple old Wear OS versions in my phone and trying to pair using them (none of them worked)
- Following this steps after having paired it to my brother's old phone and then trying to pair it with the Wear OS app (This time the wear showed the PIN and asked me if the PIN was the same that was being shown in the phone (no PIN was being shown in the phone), so I clicked Yes and then I got the same 'Incorrect PIN or passkey' error message)
- Deleting all the data (including cache) of Google Play Services, Google, Wear OS, Mobvoi app, Bluetooth/WiFi/Mobile Data connections, and then rebooting the phone multiple times (no success here too)
P.S.: I did a factory reset of the phone before every mentioned attempt.
More info about my watch versions:
Home App: 2.8.0.183948193
Google Play Services: 12.2.21
Android OS: 8.0.0
Security Patch: August 1st 2018
Info about my brother's watch versions:
Wear OS by Google: 2.6 (I don't know why I don't have this in my 'versions' section)
Home App: 2.22.0.234791771
Google Play Services: 15.0.90
Android OS: 8.0.0
Security Patch: August 1st 2018
As you can see there's a clear difference between the versions of each watch, I would like to update my watch to my brother's versions but I couldn't find how to do that without rooting the watch (I'd prefeer to keep it unrooted if possible).
Any idea of what could I do to solve this? My phone's bluetooth works fine (I can use other bluetooth devices such as headphones or a JBL Charge 3, this is the first one that didn't work) and my Ticwatch works fine too (I could make it work with the S7 )
UPDATE: I connected the watch to the Samsung S7, updated Wear OS and now all the versions of both phones are the same (except for the Google Play Services version, I couldn't update it), it still doesn't pair.
Hi,
I have this Android TV set top box from my internet and cable provider, codenamed dcn88_72604_ln, and I have one crazy issue : It crashes almost every time I use my phone (LG G7+), if both in the same network (WiFi).
I already contacted my provider but their solution is to give me replacement unit, which have the same issue, as this is my 3rd unit in just 5 days. I've tried playing games on my android tablet, browsing on my iPhone, nothing happens. Grab my G7+, open app drawer, suddenly the STB crashes. I have to unplug & plug the power cable and let it boot again.
The only solution is to turn off WiFi on the STB, but of course it lost abilities like controlling smart devices and casting videos. I also have other android TV box (Mi Box 3) but it works perfectly.
Any help would be greatly appreciated, thanks!
Sent from my LM-G710 using Tapatalk
Hello,
I bought recently Samsung Galaxy Watch 4 Classic 46mm and I have problem with Galaxy Wearable app, after I set everything up all was running correctly. The problem shows, after I turn off bluetooth on watch or phone. When I try to reconnect over bluetooth it shows in bluetooth settings that watches are paired with phone but when I look into the app it says "Your watch isn't connected to your phone." when I click on connect it doesn't reconnect. I already tried to restart the phone or watch, clear cache and also reinstall the app and the plugin. My phone brand is Xiaomi and it should work with the watch.
Thank you for any advices.
Are you running MIUI? I know Xiaomi is very strict with the management of the permissions. Check permissions of the app in the phone, and do not optimize battery on this app. These are the two issues I can think of.
Try downloading Samsung Health and connecting your Galaxy Watch 4 via that app. I have heard that works best.
I don't know if I should open a new thread or not...
I have Galaxy Watch...2? (SM-R800) and PocoPhone running the MiUI. I have Glaxy Wear app and Watch2 "plugin" from the app store (that has no battery optimization options).
The watch disconnects and refuses to connect from the watch side. The only option to connect is to connect BT from the phone, and then connect via the Wear app. Connecting from Wear app alone is not successful.
Connecting like this will last me about half a day, then it's disconnected again.
I'm trying to create an Automate flow that reconnects BT and launches the "connect" activity of the Wear app. Problem is, I don't know which activity to launch.
Does anyone know Wear activities? Or another workaround to bypass MiUI draconic rule?