[Completed] [Q] samsung gt-i9070 bricked after downgrade - XDA Assist

I own a samsung gt-i9070. I decided to downgrade from jb 4.1.2( XXLQE) to gb 2.3.6 (XXLDE), due to poor perfomance. I used the stock rom from sammobile and flashed it with Odin. After flashing the stock rom, the phone stuck in boot logo. No download/recovery mode is working, no usb connection to PC (Odin), no charging battery. Is there any hope to revive it?

Hi,
You can ask for help with that here,
> Samsung Galaxy S Advance I9070 > Galaxy S Advance I9070 Q&A, Help & Troubleshooting > [Q & A] Ask ask your questions here !!
Good luck!

thanks for the tip

Related

[Completed] [Q] Mobile Network problem of Samsung Galaxy S advance

I have recently installed custom rom of CM11 . Everything was installed correctly but after rebooting and starting phone my mobile network never come? What should i do get it back? I have no backup of my stock ROM
Hi,
You can ask this in Galaxy S Advance's Q and A thread over here:
> Samsung Galaxy S Advance I9070 > Galaxy S Advance I9070 Q&A, Help & Troubleshooting > [Q & A] Ask ask your questions here !!
Good Luck!
Thank you. Thread Closed!

[Completed] [Q] i m new nd i m just asking

Hi everyone the question i m going to ask may seem a bit strange but i want an official update for my galaxy s4 mini gt-i9190 to android kitkat nd i do not completly trust those odin staff so i have been askin myself if there is anyway to go official again i don t care about root all i m intersted in now is getting the kitkat
so is there anyway i can go official again ? Nd thak u
Hi,
Normally to return to a stock unrooted firmware, you would flash with Odin. ?
Since you prefer not using Odin, you will have to ask here for advice...
> Samsung Galaxy S 4 Mini > Galaxy S 4 Mini Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.

[Completed] [Q] Need Help to Fix Phone After AT&T OTA update

Hey Good day,
I am requesting some help from anyone who may have experienced or knows how to resolve this issue.
I have been using the back to stock firmware on my AT&T Samsung Galaxy Note 2 until yesterday the ota AT&T update installed and from since then the phone will not boot past the Samsung Galaxy Note 2 logo. I can get into download mode but cant get into the stock recovery mode or any recovery mode and i have tried reflashing the back to stock firmware again without any change.
Can anyone give me any advice on how to go forward..... I would hate to think my device is bricked just like that.
I appreciate your time and efforts in advance.
Cheers to you ALL.
Hi,
Here's a similar thread you can read through,
> AT&T Samsung Galaxy Note II > AT&T Galaxy Note II Q&A, Help & Troubleshooting > OTA 4.3 bricked my device
If you still need help, you can ask the experts who own your device, here...
> AT&T Samsung Galaxy Note II > AT&T Galaxy Note II Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.

[Completed] [Q] Help with Samsung S2 (Bell) ... bricked for sure

Hi Gurus,
I have a Samsung Galaxy S2 from Bell (Canada) i9100M. I may have tried to root the phone unsuccessfully in the past and did not use the phone after that, now when I power the phone up, all I see is a Phone exclamation triangle and a PC.
I am an amateur in this dept and searched this forum, tried Odin but no luck, here what I tried:
I tried Odin3 (v1.85, v3.04 and 3.07) with Stock ROMs or CWM and it always get stuck at write nand start or sbl bin around FactoryFS or SBL1. I tried different USB cables even different PC but no luck, all the videos about unbricking a phone looks easy and smooth but I am stuck.
Can you gurus help me with step by step instructions assuming that phone has nothing on it or how to completely wipe it in case its completely corrupted and reflash it, can my phone be saved?
Please help
Thanks in Advance
Z (Calgary)
Hi,
Here is a similar thread you can read through,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q] Please Help Me I Bricked my I9100M Bell SGS2
If that doesn't help, you can ask for help here,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q&A][SGS2][Newbies][Experienced Users][RCs] New members friendly Q&A thread
Good luck!
Darth said:
Hi,
Here is a similar thread you can read through,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q] Please Help Me I Bricked my I9100M Bell SGS2
If that doesn't help, you can ask for help here,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q&A][SGS2][Newbies][Experienced Users][RCs] New members friendly Q&A thread
Good luck!
Click to expand...
Click to collapse
Thanks I tried the above steps however as I said ODIN gets stuck at nand write, I can get into download mode but the process wont go through ....
Do anyone know someone in Calgary area to help me with this phone? looks like I am over my head on this one
You'll need to ask in the second link I gave you. ?

[Completed] [Q] I9001 ROM Problems

Hello,
I have a problem - one time I changed in my phone (Samsung Galaxy S Plus) from DALVIK to ART (By the way, I have Cyanogenmod 11 installed on phone). Then I rebooted my phone and it kept on loading so I force turned it off. Then again, I turned it on and now it's stuck on Samusung logo and that's all. I can't load recovery mode, only download mode. Please help me!
Hi,
Being able to get into download mode is good. You will likely need to flash your stock firmware again with Odin. Sammobile website should have your firmware.
If you have more questions or need help with that, you can ask for help in this dedicated help thread for your device,
> Samsung Galaxy S I9000 > Galaxy S I9000 Q&A, Help & Troubleshooting > Galaxy S Plus I9001 Q&A
Good luck!

Categories

Resources