Hey Good day,
I am requesting some help from anyone who may have experienced or knows how to resolve this issue.
I have been using the back to stock firmware on my AT&T Samsung Galaxy Note 2 until yesterday the ota AT&T update installed and from since then the phone will not boot past the Samsung Galaxy Note 2 logo. I can get into download mode but cant get into the stock recovery mode or any recovery mode and i have tried reflashing the back to stock firmware again without any change.
Can anyone give me any advice on how to go forward..... I would hate to think my device is bricked just like that.
I appreciate your time and efforts in advance.
Cheers to you ALL.
Hi,
Here's a similar thread you can read through,
> AT&T Samsung Galaxy Note II > AT&T Galaxy Note II Q&A, Help & Troubleshooting > OTA 4.3 bricked my device
If you still need help, you can ask the experts who own your device, here...
> AT&T Samsung Galaxy Note II > AT&T Galaxy Note II Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
Related
Hi guys.. been at this for 2 days now trying to figure out how to install CWM or Safestrap onto my Verizon Galaxy S4. I managed to get root by using Odin and downgrading to NC5 kernel but when i install CWM recovery or Safestrap it says success and I reboot it brings me to androids koth reboot.. any idea what to do I'm trying to install Hyperdrive
Hi,
I suggest reading this entire thread very carefully.
> Verizon Samsung Galaxy S 4 > Verizon Samsung Galaxy S 4 General > [WIP] What you need to know before, during and after modifying your verizon S4
If you still need help or have any further questions about this device, you will need to register on XDA and ask here,
> Verizon Samsung Galaxy S 4 > Verizon Samsung Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
I have Samsung Galaxy 3 and need to find my stock firmware. Any idea what my HIDSWVER is so i can use CheckFUS?
Model # SGH-T999L
A little background history: my phone was rooted and i got it stuck in bootloop so I'm trying to flash the old firmware so my phone will load. I am able to load recovery menu so hopefully fixable.
Hi,
Here is a great info thread on your device. Post 3 has flashing stock instructions. Any further questions about this can be asked there too,
> T-Mobile, Wind, Mobilicity, Videotron Samsung Galaxy S III > T-Mobile Galaxy S III Q&A, Help & Troubleshooting > [INFO] [FAQ] Galaxy S3 w/ LTE - SGH-T999L & SGH-T999N
Good luck!
Thank you very much. They had the info i needed
Darth said:
Hi,
Here is a great info thread on your device. Post 3 has flashing stock instructions. Any further questions about this can be asked there too,
> T-Mobile, Wind, Mobilicity, Videotron Samsung Galaxy S III > T-Mobile Galaxy S III Q&A, Help & Troubleshooting > [INFO] [FAQ] Galaxy S3 w/ LTE - SGH-T999L & SGH-T999N
Good luck!
Click to expand...
Click to collapse
thanks again, to let others know your not stuck with a softbricked phone, it can be restored.
flashing firmware saved my phones life
Hi Gurus,
I have a Samsung Galaxy S2 from Bell (Canada) i9100M. I may have tried to root the phone unsuccessfully in the past and did not use the phone after that, now when I power the phone up, all I see is a Phone exclamation triangle and a PC.
I am an amateur in this dept and searched this forum, tried Odin but no luck, here what I tried:
I tried Odin3 (v1.85, v3.04 and 3.07) with Stock ROMs or CWM and it always get stuck at write nand start or sbl bin around FactoryFS or SBL1. I tried different USB cables even different PC but no luck, all the videos about unbricking a phone looks easy and smooth but I am stuck.
Can you gurus help me with step by step instructions assuming that phone has nothing on it or how to completely wipe it in case its completely corrupted and reflash it, can my phone be saved?
Please help
Thanks in Advance
Z (Calgary)
Hi,
Here is a similar thread you can read through,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q] Please Help Me I Bricked my I9100M Bell SGS2
If that doesn't help, you can ask for help here,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q&A][SGS2][Newbies][Experienced Users][RCs] New members friendly Q&A thread
Good luck!
Darth said:
Hi,
Here is a similar thread you can read through,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q] Please Help Me I Bricked my I9100M Bell SGS2
If that doesn't help, you can ask for help here,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q&A][SGS2][Newbies][Experienced Users][RCs] New members friendly Q&A thread
Good luck!
Click to expand...
Click to collapse
Thanks I tried the above steps however as I said ODIN gets stuck at nand write, I can get into download mode but the process wont go through ....
Do anyone know someone in Calgary area to help me with this phone? looks like I am over my head on this one
You'll need to ask in the second link I gave you. ?
Please someone help me im getting very frustrated
Im stuck in a bootloop and its telling me "Recovery Booting.... Recovery is not seandroid enforcing
I cant get into recovery mode at all and it just keeps booting on and off
Hi,
Likely using Odin to flash your stock firmware is the answer. Here's a similar thread,
> T-Mobile Samsung Galaxy Note 3 > T-Mobile Galaxy Note 3 Q&A, Help & Troubleshooting > [Q] T-Mobile Note 3 N900T Stuck In Boot Loop From CWM
If you still need help or have future questions, Here's a good place to ask for help,
> Samsung Galaxy Note 3 > Galaxy Note 3 Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
Likely using Odin to flash your stock firmware is the answer. Here's a similar thread,
> T-Mobile Samsung Galaxy Note 3 > T-Mobile Galaxy Note 3 Q&A, Help & Troubleshooting > [Q] T-Mobile Note 3 N900T Stuck In Boot Loop From CWM
If you still need help or have future questions, Here's a good place to ask for help,
> Samsung Galaxy Note 3 > Galaxy Note 3 Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
Where can I find the stock firmware for my phone and im using 4.4.2
Read the first link I gave you... They suggest where in the thread. Or try sammobile website.
If those don't work, please ask in the second link I gave you. ?
Hey
I've had bootloops and what I did was to install CWM all over again in Odin so I could access again to CWM, I unchecked Auto reboot waited 1min and while In download mode I did the hardware key combination and got into CWM and then I re-installed everything.
DanDellarobbia said:
I've had bootloops and what I did was to install CWM all over again in Odin so I could access again to CWM.
Click to expand...
Click to collapse
I can get into download mode so would i go to odin and flash the cwm file and i should be able to get in again
Please use the links provided. Assist isn't the place for Troubleshooting.
Thanks, thread closed. ?
so i did averything people said and all i get
recovey is not seanenforcing
set warranty bit: recovey
two vibrates
normal boot to android any help or solution hope i get an answer
:fingers-crossed:
Hi there,
The best place for this device specific question is here but you must give more details about what are you doing:
T-Mobile Galaxy Note 3 Q&A, Help & Troubleshooting
Good luck