Database Info

Need help. Phone has bad rom, can't access recovery

i may be up a creek now. i've tried everything i can.
here's the whole situation, maybe someone can offer some guidance on how i can get my phone back.
i installed this rom, http://forum.xda-developers.com/showthread.php?t=1835478, but did not see that there was a problem with people getting stuck at the initial google boot logo. i wouldn't have tried it if i did.
but it's too late now. so i too have that problem. in addition, i also have that problem with the nexus s in that the power button is busted, works only to boot the phone.
so i boot the phone normally, i get to that boot logo indefinitely.
i press up and power button i get to fastboot screen. for some reason the volume buttons don't work on that screen so i can't pick recovery there. only thing that works is hitting the power button and reboots the bootloader.
i plug the phone into my pc and i can't access it through adb, fastboot... does not recognize a device is connected.
so in summary, all i can do is access the fastboot screen or the boot logo screen.
if someone can help me figure out how to do one of the following: boot into recovery instead of fastboot, figure out how to use the volume buttons in fastboot, or get the phone recognized by my pc so i can use adb, that would be awesome.
i feel like i just bricked it for good....
thanks

Install the SDK. Launch it. Find the drivers to download in the SDK. Install them. Boot the phone into fastboot and connect it to pc. Open up a command prompt IN the directory that has fastboot in it. Type in the command prompt fastboot devices.
If your serial number shoes your good to go. Get the .img of your custom recovery and type fastboot flash recovery nameofile.img. with that being the exact file name ( hint type the first letter of the recovery and hit tab)

Yep, you gotta get fastboot working again. It's pretty important.
Sent from my Nexus S 4G using xda premium

i've had the sdk/driver installed already.
like i said, the phone when it boots is not being recognized by the laptop at all, as if it's not even plugged in. so when i do fastboot devices, nothing shows up.

Was it recognized prior?
Sent from my Nexus 7 using Tapatalk 2

in the prior rom it was recognized by the laptop, before i tried to flash the rom i linked above that created this mess...

albundy2010 said:
Install the SDK. Launch it. Find the drivers to download in the SDK. Install them. Boot the phone into fastboot and connect it to pc. Open up a command prompt IN the directory that has fastboot in it. Type in the command prompt fastboot devices.
If your serial number shoes your good to go. Get the .img of your custom recovery and type fastboot flash recovery nameofile.img. with that being the exact file name ( hint type the first letter of the recovery and hit tab)
Click to expand...
Click to collapse
AlphaEchoViktorSierra said:
Yep, you gotta get fastboot working again. It's pretty important.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Yep fastboot is a great tool, if you have a nexus s then you MUST get it working!
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
wookietv said:
i've had the sdk/driver installed already.
like i said, the phone when it boots is not being recognized by the laptop at all, as if it's not even plugged in. so when i do fastboot devices, nothing shows up.
Click to expand...
Click to collapse
Seems like your nexus s drivers are not installed in your laptop
google the nexus s usb drivers download them and put in the respective folder
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
albundy2010 said:
Was it recognized prior?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
was gonna ask the same question

like i said, i already had the sdk and drivers installed.
they worked fine before i installed that rom.
this definitely seems like it's on the fault of the phone, not the laptop.

looks like you got busted like a SIR!!
Just kidding man dont take it seriously...
I might sound silly but i hope you have tried this but if you have not then do try
Go here and try changing the usb plugs
http://forum.xda-developers.com/showthread.php?t=1785672
IT shows flashboot steps, you need to connect phone in bootloader mode which you are achieving atm, and see if it works
and if it doesnt then let me know i will try to help out more if i could
P.S I am also new in android so pardon my noobnes

i went another route...
i figured i had nothing to lose at this point... so i ripped the phone apart and attempted to fix the power button, which i believed in turn would fix not being able to use the volume keys in the fastboot screen.
i was correct. i jiggled with the power button inside and it seemed to work. the volume keys now reacted in the fastboot screen.
i was able to then get into recovery, wipe the phone, connect the phone to the laptop and put a new rom on it.
i'm not sure if its fixed the button completely, but at least i can get into the new rom :laugh:

well thats a relief and i am glad that you problem is solved
a little advice, get repaired that power button for good so that you have no hassle in near future

converse5 said:
well thats a relief and i am glad that you problem is solved
a little advice, get repaired that power button for good so that you have no hassle in near future
Click to expand...
Click to collapse
+1, I agree with you. It does not cost much as well. I had this problem and was managing with apps. But finally got it replaced for good.

[Q] I think I'm totally screwed this time

I have multiple problems so read on.
A couple weeks ago the computer stopped recognizing my verizon gnex that was rooted, unlocked and running jbsourcery 5.1 that it previously had no problems seeing. It still charges via wall and usb with original m-usb cable. I've tried numerous times to re-install the samsung driver on the computer with wug's toolkit with no luck. I've tried another samsung m-usb cable...no luck. My computer is new so no problems with usb ports (I've tried all of them) and have tried the ver 2.0 port. USB debugging is on and fastcharge is off.
My second and worst problem:
Yesterday in a fit of stupidity I restored one of my original backups ( I believe made with CWM recovery ) that turned out to be a stock. img and after restoring it OTA updated to stock JB. All my other backups were done with TWRP and it's no longer present on the phone. I tried installing BootUnlocker from play store but it says I have no root access and the phone won't flash either recovery so I'm stuck with only Fastboot ver. 9 that only wants to flash something from adb. I've exhausted my knowledge and eyes are crossed from reading forums.
I want to get back to full rooted or back to full stock.
It is still unlocked
I don't know if I can use something like Terminal Emulator for this or even how to use it.
If you know enough to see that I'm totally screwed...Please tell me! (I'm a big boy)
If you think you have a solution...You are a god!
If you need more info...I can provide it

Whoa...really big problem
---------- Post added at 08:54 PM ---------- Previous post was at 08:47 PM ----------
Why can't you enter recovery mode?
And what's ur age...

Streetryders_2000 said:
Whoa...really big problem
---------- Post added at 08:54 PM ---------- Previous post was at 08:47 PM ----------
Why can't you enter recovery mode?
And what's ur age...
Click to expand...
Click to collapse
Rom manager is on the phone but each time i try to reboot into recovery it does nothing. If I try to enter recovery through VOL up/dwn-Pwr it just goes to minimal fastboot that only gives me the option of installing from adb.
50 yrs young

earbuster said:
Rom manager is on the phone but each time i try to reboot into recovery it does nothing. If I try to enter recovery through VOL up/dwn-Pwr it just goes to minimal fastboot that only gives me the option of installing from adb.
50 yrs young
Click to expand...
Click to collapse
It wont flash recovery while in Rom manager but it says CWM and Twrp are both installed on phone.

First thing, I was serious about ur age,
Second to go into recovery mode see here.
www.youtube.com/watch?v=1vXCyI-BpZw

Yes...but when I try to enter recovery all I get is the dead android icon with a red triangle on his chest. If i press vol/up and pwr button at this point it goes to the install from adb options in fastboot ver.9
And I'm being honest...I'm 50

First thing, see the second thing
Second thing go here,
www.youtube.com/watch?v=OMBwrdWqpnA
Pls press thnx if helped.

Sorry, I tried reloading the drivers into computer so I could use Wugs toolkit but they won't load because the computer doesn't recognize the phone. I keep getting an error 10 when trying to update the drivers. I truly appreciate your help and thank you but I'm stuck.
Any other ideas?

Ur welcome and sorry I couldn't help much...
I'll try help ASAP...
Sorry again..

You may have already tried it, but have you tried to plug the phone into a different computer ?

Yes, I have a win xp laptop I tried connecting to also. No luck

[GUIDE] How to recover from OnePlus soft bricked?

I decided to write a guide on how to recover from a bricked OnePlus One. This is my first guide.
About me: I am a newbie on Android.However, the XDA community has taught me a lot about my Android phone for the first month of using it. That's right! I have only been using Android for less than one month so take this guide with a grain of salt. But if you happen to soft brick your One, this is the guide to turn to. I have created two mind-bending/heartbreaking/frightening scenarios that I have experienced. Though, resolved thanks to this community.
Note: This will wipe your phone!
Scenario 1:
Soft bricked, (CM gear keeps spinning but won't boot to lock screen)
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
How to find out if you have unlocked bootloader:
1. Locate the folder where you installed the OPO Toolbox.
2. Hold Shift and right click on ANY white area within the folder.
3. Left click 'Open command window here'
4. Type:
fastboot oem device-info
If it returns True on tampered. Then you have unlocked your bootloader.
I hope this guide helps solve your soft-bricked problem. Good luck!

I suggest that a mod moves this to the General section

pandasa123 said:
I suggest that a mod moves this to the General section
Click to expand...
Click to collapse
Report the thread if you think its necessary.

Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:

Digital Arm said:
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Click to expand...
Click to collapse
You don't have an unlocked bootloader.
Transmitted via Bacon

timmaaa said:
You don't have an unlocked bootloader.
Transmitted via Bacon
Click to expand...
Click to collapse
Thx got it:cyclops:

Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
Hi i am stuck in scenario 2...I did all a u said but i cant flash CM XNPH22R ...where do i find this file...i cant find it on my phone either ..pls help ??

Thank god for this thread omg, saved my life

Locked Bootloader
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??

RiccoSuave said:
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
Click to expand...
Click to collapse
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.

Champi12301 said:
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Click to expand...
Click to collapse
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.

RiccoSuave said:
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
Click to expand...
Click to collapse
Then first you need to unlock the bootloader via fastboot,but that action erases all data. I assume,if you modified the boot via fastboot, USB DEBUGGING is working,so after try to do the softbrick tutorial of the thread.
Tecleado desde mi 1+1.

how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!

deanwinchester370 said:
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
Click to expand...
Click to collapse
Did you find a solution ?
I'm facing the exact same issue on my OPO.
>> bootloader locked
>> no recovery
>> impossible to unlock the bootloader
>> OPO stuck at 1+ logo and keep rebooting agin and again and again...
....i think my OPO is dead T_T
Is it a way to force the bootloader unlock ?
Please HELP !!!

Didn't work for me
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.

All done
davmeva said:
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
Click to expand...
Click to collapse
No one replied to this but never mind, took me two days but I now have a working phone. So you can call in the dogs, cheers

hi davmeva
did you fixed your oneplus one till now or not because i have also same situation here and no success till now .
i did by mistake all this stuff and now nothing work still same condition
if you got any solution please share it

[Q] My One is not booting at all, and does not react when i try to charge it

If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.

One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon

alan2500 said:
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
yashshan said:
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
Click to expand...
Click to collapse
That won't work, the phone isn't turning on.

Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Thanks a lot, i dont know how i did not come upon that link while trying various fixes, now i can boot the phone again

Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Uh, new problem, i used the toolkit to unlock the bootloader, and i had to use the Ultimate Tool kit to get TWRP on it. When i connect the phone to the pc (windows 7) i keep getting a message saying i have to format the phone before i can use it. When i click that, it says its writing protected. When i boot up the phone, it turns on, and i can go to the home screen (some times) but after a few seconds, it just turns off it self. Sorry for asking for your help again, but do you know of this problem? Google just came up with results for people with battery problems.

Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.

alan2500 said:
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
Click to expand...
Click to collapse
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?

Heisenberg said:
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Click to expand...
Click to collapse
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.

alan2500 said:
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
Click to expand...
Click to collapse
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471

Heisenberg said:
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Click to expand...
Click to collapse
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.

alan2500 said:
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
Click to expand...
Click to collapse
Don't dirty flash, clean flash. Try out the Exodus ROM, great battery life and great features too.

Help me fix a bricked OPO :(

Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?

try charging the phone for a few hours

se7enlyn said:
try charging the phone for a few hours
Click to expand...
Click to collapse
yeah, forgot to mention that. can't even charge it. when I plug it in it does the same. tries to turn on. shows the first splash screen and reboots doing the same again and again. doesnt even show the charging screen with chinese text and battery animation.

sounds like u need a new battery

ireaper4592 said:
sounds like u need a new battery
Click to expand...
Click to collapse
already tried that too. had a replacement battery laying around. changed it and still no luck.

@bmark240
help please

se7enlyn said:
@bmark240
help please
Click to expand...
Click to collapse
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732

Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.

bmark240 said:
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
Click to expand...
Click to collapse
Yes, I have TWRP installed, but cant access it. Shows the TWRP splash screen and then reboots after like 10 seconds or so.
ADB does not see device. Only shows the device during that 10 second TWRP splash screen time, but even then no commands are effective and it just reboots.
Already tried holding down power button for few seconds. No luck.
I already installed all the possible drivers and media feature packs on my Windows 10. Still no luck.
And yes, I am running latest Windows 10 Pro x64.
And no, since I cant access Fastboot, I can not re-flash TWRP either.

kallum7 said:
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Gonna try that right now. Hopefully that will fix it.

Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.

THEVAN3D said:
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
Click to expand...
Click to collapse
because i had bricked my phone a few months ago and that is how i got my phone back using the colour os

THEVAN3D said:
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
Click to expand...
Click to collapse
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out

FairuzOnn said:
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
Click to expand...
Click to collapse
Thanks, but I already fixed it.

i had it in the past for some reason too. Managed to fix it using the color os method. Carefully followed the steps until i could flash again. That was a year ago tohugh. There should be some thread around wit some all-in-one solution against bricks.