Related
Hey everyone,
I have an LG P500 ( AT&T Variant - 'LG Thrive'). I had it rooted, although this is not the cause of the bricking. One day all of a sudden out of the blue it would not boot. After pressing the power button, the LG logo will come on, and the 4 button LEDs will flash 4 times and stay lit and the device will continue to stay on the LG screen. Currently this is the status of my device. ADB or fastboot are unable to notice the device whether it's on the LG screen, Emergency mode, or the console looking screen (white text/black background). FYI, I never had CWM or any alternate recovery program installed. Also - suggestions for the KDZ program would not be helpful, I run Linux and do not have access to a Windows computer.
Thanks for any help!
ok try factory reset power+vol down +home
hold them till u see android
androidisfuture said:
ok try factory reset power+vol down +home
hold them till u see android
Click to expand...
Click to collapse
This just brings me to the udc_start terminal looking screen (white text/black background).
rjortiz said:
This just brings me to the udc_start terminal looking screen (white text/black background).
Click to expand...
Click to collapse
Ok if that doesnt' works, you try this,, Power + Volume Up + Home,, that's how i use to make a factory reset on my thrive
And if that doesn't work either try this http://forum.xda-developers.com/showthread.php?t=1088046, this helped me to unbrick my thrive,, take note, that you will need a windows computer,, don't know if this works on ubuntu or another linux variant
If you decide to try the second method pm me
gabo_lope said:
Ok if that doesnt' works, you try this,, Power + Volume Up + Home,, that's how i use to make a factory reset on my thrive
Click to expand...
Click to collapse
This key combo has no effect on my device.
gabo_lope said:
And if that doesn't work either try this http://forum.xda-developers.com/showthread.php?t=1088046, this helped me to unbrick my thrive,, take note, that you will need a windows computer,, don't know if this works on ubuntu or another linux variant
If you decide to try the second method pm me
Click to expand...
Click to collapse
Basically this thread is showing how to flash recovery through fastboot, which I can/have tried through my system. As I mentioned, fastboot does not recognize the phone, nor will anything transfer through it (or through ADB).
I'm not sure but I'm starting to think that the last time my phone worked I did not have debugging enabled. Would that cause this current problem? Although, the phone does display the console screen:
Code:
fastboot mode started
udc.start()
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
--suspend--
deleted
gabo_lope said:
that shows when you plug it in on the computer?
Click to expand...
Click to collapse
It shows this only when I do the key combo VolDn+Home+Power. Plugging it into the computer has no effect - it goes to the LG logo screen.
rjortiz said:
It shows this only when I do the key combo VolDn+Home+Power. Plugging it into the computer has no effect - it goes to the LG logo screen.
Click to expand...
Click to collapse
on what linux version are you on?
gabo_lope said:
on what linux version are you on?
Click to expand...
Click to collapse
kUbuntu, the system works fine connecting to my other Android based phone - so that is not an issue. I also have a Debian system to use if I needed to.
rjortiz said:
kUbuntu, the system works fine connecting to my other Android based phone - so that is not an issue. I also have a Debian system to use if I needed to.
Click to expand...
Click to collapse
OK, so if you say that fastboot doesn't recognizes the phone, i would guess that you have the android sdk, for fastboot to work,,, also the phone was recognized before by the computer??
just had an idea,, i will try on my computer...
well i tried to screw up my phone, by using using an incorrect recovery,, to recover it using ubuntu, the phone was recognized, and i recover it, but i had debugging enabled, and as you said before you have it disabled... The thing is this: i booted into the rom, and turn off the debugging, then i screw up my phone again and connect it, and it wasn't recognized,, I run out of ideas, maybe someone else knows a way to comunicate the phone and the computer.
The only thing left would be using KDZ, but that's a windows program, you could use wine, but even running it on windows sometimes causes a hard brick, i couldn't image what would happen if you use it on wine, so if you still have warranty i suggest you to use it
My best of luck...
gabo_lope said:
,, also the phone was recognized before by the computer??
just had an idea,, i will try on my computer...
Click to expand...
Click to collapse
I wanted to state that my other Android phone connects to this computer fine, therefore saying the computer itself does not have a problem with connecting. But, no, this bricked phone is not recognized by the computer.
gabo_lope said:
OK, so if you say that fastboot doesn't recognizes the phone, i would guess that you have the android sdk, for fastboot to work,,, also the phone was recognized before by the computer??
just had an idea,, i will try on my computer...
well i tried to screw up my phone, by using using an incorrect recovery,, to recover it using ubuntu, the phone was recognized, and i recover it, but i had debugging enabled, and as you said before you have it disabled... The thing is this: i booted into the rom, and turn off the debugging, then i screw up my phone again and connect it, and it wasn't recognized,, I run out of ideas, maybe someone else knows a way to comunicate the phone and the computer.
The only thing left would be using KDZ, but that's a windows program, you could use wine, but even running it on windows sometimes causes a hard brick, i couldn't image what would happen if you use it on wine, so if you still have warranty i suggest you to use it
My best of luck...
Click to expand...
Click to collapse
Thank you for all your help and attempts to recreate the problem...I hope your phone isn't completely bricked as well.
rjortiz said:
Thank you for all your help and attempts to recreate the problem...I hope your phone isn't completely bricked as well.
Click to expand...
Click to collapse
that's the thing, i was able to recover my phone using this windows tool http://forum.xda-developers.com/showthread.php?t=1827723
rjortiz said:
Hey everyone,
I have an LG P500 ( AT&T Variant - 'LG Thrive'). I had it rooted, although this is not the cause of the bricking. One day all of a sudden out of the blue it would not boot. After pressing the power button, the LG logo will come on, and the 4 button LEDs will flash 4 times and stay lit and the device will continue to stay on the LG screen. Currently this is the status of my device. ADB or fastboot are unable to notice the device whether it's on the LG screen, Emergency mode, or the console looking screen (white text/black background). FYI, I never had CWM or any alternate recovery program installed. Also - suggestions for the KDZ program would not be helpful, I run Linux and do not have access to a Windows computer.
Thanks for any help!
Click to expand...
Click to collapse
ADB wont recognize your phone if you cant enter fastboot.
What you can do is.. enter emergency mode andUse this tool.. its safe.
The recovery image given is for P500.. so replace it with thrive's recovery image.. partition data is ok to use!!
rr0yy said:
ADB wont recognize your phone if you cant enter fastboot.
What you can do is.. enter emergency mode andUse this tool.. its safe.
The recovery image given is for P500.. so replace it with thrive's recovery image.. partition data is ok to use!!
Click to expand...
Click to collapse
LGMDP is for Windows and won't run correctly in WINE.
Install VMware.. then you can install windows over it.
It will be like using windows over linux.. you dont need any partition or anything for that.
After you are done.. you can remove it easily!!
Are you running fastboot in terminal with root permissions
Sent from my LG-P500 using xda app-developers app
lg-one-man said:
Are you running fastboot in terminal with root permissions
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
I've tried both, either way gets the same result of nothing.
Regardless, I stated that I can use this computer to successfully connect to my other phone because I wanted to eliminate the possibility of the computer as a problem with connecting to the device.
When you run fastboot in terminal and then type device ,what does it say?
Sent from my LG-P500 using xda app-developers app
lg-one-man said:
When you run fastboot in terminal and then type device ,what does it say?
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
It prints nothing and quits. For 'adb devices' it says "List of attached devices" and lists nothing.
Code:
[email protected]:...$ ./fastboot devices
[email protected]:...$ ./adb devices
List of devices attached
[email protected]:...$
OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?
gtgeek said:
OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?
Click to expand...
Click to collapse
+1
gtgeek said:
OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?
Click to expand...
Click to collapse
So will the tablet not boot into the bootloader ?
Thx Josh
lj50036 said:
So will the tablet not boot into the bootloader ?
Thx Josh
Click to expand...
Click to collapse
Nothing, just the black screen.
I only know something is going on when I connect it to a pc I can here it connect/disconnect when I hold the power button or press the reset button. Also checked the hdmi output on another screen to make sure that wasn't the problem....it wasn't.
gtgeek said:
Nothing, just the black screen.
I only know something is going on when I connect it to a pc I can here it connect/disconnect when I hold the power button or press the reset button. Also checked the hdmi output on another screen to make sure that wasn't the problem....it wasn't.
Click to expand...
Click to collapse
I see....
If you dont have your nvflash blobs, its a brick ...
Sorry for the bad news ....
Thx Josh
lj50036 said:
I see....
If you dont have your nvflash blobs, its a brick ...
Sorry for the bad news ....
Thx Josh
Click to expand...
Click to collapse
That was the conclusion I was coming to.
Now, for a nerdier question. If I had physical access to the processor, could I program it directly using it's programming ports?
gtgeek said:
That was the conclusion I was coming to.
Now, for a nerdier question. If I had physical access to the processor, could I program it directly using it's programming ports?
Click to expand...
Click to collapse
Nope there is just no way...
The chip is locked down ... :crying:
There is lots of info out there but its just info ...
No one to date has come back from where you are ....
Thx Josh
So i'm not super competent in adb and what not, but just competent to use wuggs toolkit. I went to google's website to download lollipop 5.0 for my nexus 5. Then i set the phone back to stock, flash 5.0 and its running well. Then i go back in to settings, developer options, and to root my nexus 5 and install TWRP on it through wuggs. Now it has twrp, but will not boot up past the google name with the unlock. I only have the fastboot page and TWRP. The big kicker here is that my pc says does not recognize device and it flickers back and forth with connection every two seconds to my PC. When i go into device manager it shows android device though. So well hey i figure since i have a softbricked nexus i'll just click the button for it and reset. Well it wont do it, it pulls up fastboot.exe goes through a few commands, some saying it failed then it stops and windows tells me to close fastboot.exe
Any help from the very respected XDA?
oh, gawd.. fastbooting a factory img would have been so much faster. sorry, toolkit, i cant help you with it.
hayden55 said:
So i'm not super competent in adb
Click to expand...
Click to collapse
There's your answer right there. That's how ppl like Op brick their devices everyday
Do some research, read read and lastly Read
If you can adb the factory image you can adb a recovery. Google how to. Its literally one comand line.
Stop tossing the word bricked around, a brick is a phone that doesn't turn on and don't blame other things if you don't know how to use them.
Google is your best friend. No one is going to hold your hand.
jayRokk said:
Do some research, read read and lastly Read
If you can adb the factory image you can adb a recovery. Google how to. Its literally one comand line.
Stop tossing the word bricked around, a brick is a phone that doesn't turn on and don't blame other things if you don't know how to use them.
Google is your best friend. No one is going to hold your hand.
Click to expand...
Click to collapse
aww but i really wanted a hand hold.
hayden55 said:
aww but i really wanted a hand hold.
Click to expand...
Click to collapse
here is an extra long :highfive: for your hand holding
chapelfreak said:
here is an extra long :highfive: for your hand holding
Click to expand...
Click to collapse
Hey thanks bud! Problem was it couldnt connect to the computer for more than 5 seconds...
SOO.... i messed with mounting an OTG jump drive and it had my old TWRP back with android 4.4.4. IT Worked!
p.s. i tried just mounting system data etc... the turn on mtp connection button and it Would show up better than just plugging in but couldnt download anything big. and no adb connection
dicecuber said:
There's your answer right there. That's how ppl like Op brick their devices everyday
Click to expand...
Click to collapse
i do not need your input if you aren't going to contribute to the problem just antagonize the op
Current problem at hand: phone now will only connect to pc for 5 seconds at a time. What could do this and how do I reflash to normal?
Still using toolkits?
hayden55 said:
i do not need your input if you aren't going to contribute to the problem just antagonize the op
Click to expand...
Click to collapse
It's a suggestion
Disclaimer: I use OS X/Terminal to fix these things normally and honestly found that after the initial learning curve, it's easier than using Windows or Wugfresh. I'm not a developer, just a hobbyist user.
Make sure you're using an OEM cable to connect to the computer if you're getting dropouts. Also, attempt to uninstall and reinstall OEM drivers (I believe Wugfresh has instructions on how to do this) for Windows.
If you have confirmed that you have TWRP 2.8.1.0 installed, try to boot to TWRP --> ADB Sideload. Connect phone to computer, open Terminal/Console and type the command 'adb devices' (without the apostrophes. I haven't used Windows since I stop using Wugfresh, so the command probably differs). If the device can be seen through this, you should be able to return to the bootloader and start issuing fastboot commands to flash the image.
Let me know how I can help!
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
alan2500 said:
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
yashshan said:
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
Click to expand...
Click to collapse
That won't work, the phone isn't turning on.
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Thanks a lot, i dont know how i did not come upon that link while trying various fixes, now i can boot the phone again
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Uh, new problem, i used the toolkit to unlock the bootloader, and i had to use the Ultimate Tool kit to get TWRP on it. When i connect the phone to the pc (windows 7) i keep getting a message saying i have to format the phone before i can use it. When i click that, it says its writing protected. When i boot up the phone, it turns on, and i can go to the home screen (some times) but after a few seconds, it just turns off it self. Sorry for asking for your help again, but do you know of this problem? Google just came up with results for people with battery problems.
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
alan2500 said:
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
Click to expand...
Click to collapse
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Heisenberg said:
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Click to expand...
Click to collapse
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
alan2500 said:
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
Click to expand...
Click to collapse
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Heisenberg said:
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Click to expand...
Click to collapse
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
alan2500 said:
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
Click to expand...
Click to collapse
Don't dirty flash, clean flash. Try out the Exodus ROM, great battery life and great features too.
This may be a simple solution, but I am completely puzzled on how to fix this.
SO i recently rooted my phone & used the twrp "twrp-3.3.1-4-guacamole". Installed magisk via that twrp and continued with my day.
I accidentally got a virus by trying to get a full free vpn, me being a terrible pirate, i accidentally got a virus! Silly me.
It was annoying me and I decided to factory reset my phone... not via twrp. I remembered after I clicked "Reset all" on oxygenos that it's not the way how to do it with a root device, and well.. it didn't exactly work.
Every time I power/reboot the phone it just brings me to the fastboot menu of "START", "POWER OFF", "RECOVERY MODE", & "RESTART BOOT LOADER". I thought since TWP is recovery mode I try to access that... no luck, it just brings me back to that fastboot menu. I tried going on CMD via adb by saying "fastboot flash boot twrp-3.3.1-4-guacamole.img". It will say it's finished and successful, but when i reboot and try to access recovery mode it just does not work.
TL;DR: Think I bricked my phone, there is no OS installed and I can only access the fastboot.
Any help? Much appreciated
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
trapcoder666 said:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
Thank you for the guap recovery as i didn't know it existed. However, what are the steps? when i go on the MSM download tool it doesn't detect my phone.
that being said, i can't access any of my files through my pc using fast boot. on MSM it's just saying "waiting for device" even when plugged in so thats annoying.
trapcoder666 said:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
I downloaded the one you sent, and after a while as my internet is bad. It still does not work.
Whenever I try to install the qualcomm drivers it never shows up, and when i try and boot it up so the gual recover detects my phone it never works. It's still saying "waiting for device".
Does anyone know how to fix this? it's doing my head in that it's not as easy as it should be.
MOweenSalah said:
I downloaded the one you sent, and after a while as my internet is bad. It still does not work.
Whenever I try to install the qualcomm drivers it never shows up, and when i try and boot it up so the gual recover detects my phone it never works. It's still saying "waiting for device".
Does anyone know how to fix this? it's doing my head in that it's not as easy as it should be.
Click to expand...
Click to collapse
Pretty sure that your phone will not be accessible via adb/fastboot during the msm process. Did you follow the directions in the link above to a T?
A few things to note:
- Works perfectly fine for unbricking GM1917 modeled OnePlus 7 Pros.
- Use the original cable and try to plug it into a USB 2.0 port. I've found that this is the most ideal condition.
- Make sure your device is charged up. If you can't see how much charge it has, leave it charged via the 30W warp charger for 40 minutes and that should be good enough.
- In the L2 drivers folder found in the archive, navigate to the 32 or 64 folder depending on your system's architecture, and click on the file that ends in the extension ".cat". Then, click "view signature", then "View certificate", then "Install." This is IMPORTANT.
- Then, make sure your device is powered OFF, then, plug in the USB-A side of the cable (big head) into your computer and do NOT connect the USB-C (small head) into your phone yet.
- Hold down Volume up AND volume down for five seconds, and while you're continuing to hold, plug the USB-C side into your phone. The drivers should automatically download, and you should see a "Qualcomm QD loader" device in Device Manager. If you see an exclamation mark or you don't see this, you are doing it wrong and you need to repeat the above steps.
- Open up MSMTool.exe as an administrator and click 'start' only. Should take a few minutes, but you will have a good-as-new OnePlus 7 Pro.
Click to expand...
Click to collapse
Krsmqn said:
Pretty sure that your phone will not be accessible via adb/fastboot during the msm process. Did you follow the directions in the link above to a T?
Click to expand...
Click to collapse
I did yes, i pressed all buttons and the power button for 5 seconds and plugged my charger in. Then after that went on the MSM tool and it went straight to the fastboot. I really don't know but it loves this fastboot tool haha
Krsmqn said:
Pretty sure that your phone will not be accessible via adb/fastboot during the msm process. Did you follow the directions in the link above to a T?
Click to expand...
Click to collapse
Add: I made a video showing what I mean with the fastboot. Basically if i do anything with the phone fastboot it will just go back to the menu (sorry for bad quality)
https://www.youtube.com/watch?v=jU8a6kDXNNs&feature=youtu.be
MOweenSalah said:
Add: I made a video showing what I mean with the fastboot. Basically if i do anything with the phone fastboot it will just go back to the menu (sorry for bad quality)
&feature=youtu.be
Click to expand...
Click to collapse
It's one of those things where if someone was there with you, it'd likely get figured out. I've seen this kind of situation hundreds of times on XDA, and with all due respect, the problem is most always at the hands of the user. These phones are cookie cutter made, so there's nothing different (besides individual variants) that would make thee tools not function correctly, unless it's operator error. But that's not set in stone. Just don't give up. Try setting up your camera for an overhead view. I couldn't tell if you were plugging in your cord. And it seemed to reboot, instead of power off. Repeat the steps carefully, and see if you can achieve better results.
Don't give up! We're here for you ?
Make sure phone is powered off before plugging it in. Launch msm tool, Press the vol up and down key for a few seconds then plug in.
Edit : make sure your drivers are up to date too.
I don't know about msm tools never tried it but I know your situation.
Don't do fastboot flash boot twrp-3.3.1-4-guacamole.img
Remove the word flash. You are supposed to boot into twrp then flash the zip file to the phone.
look at this
Command in Fastboot mode is:
Fastboot boot "name of the recovery".img. Phone should boot to twrp. Then flash twrp.zip
or try Fastboot roms:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Choose the one for youre phone (region)
MSM tool it's the last option.
Can't you just switch slots from fastboot or did you mess up both?
trapcoder666 said:
Make sure phone is powered off before plugging it in. Launch msm tool, Press the vol up and down key for a few seconds then plug in.
Edit : make sure your drivers are up to date too.
Click to expand...
Click to collapse
Firstly I'm terribly sorry for no response (same goes to everyone else looking into this matter for me. THANK YOU!)
However, I have done this multiple times in the past and it instantly goes back to boot menu. it sucks :/
IronSingh said:
I don't know about msm tools never tried it but I know your situation.
Don't do fastboot flash boot twrp-3.3.1-4-guacamole.img
Remove the word flash. You are supposed to boot into twrp then flash the zip file to the phone.
look at this
Click to expand...
Click to collapse
Okay. I shall go and look into this situation when I receive my phone back (going to explain that in a later quote)
larsdennert said:
Can't you just switch slots from fastboot or did you mess up both?
Click to expand...
Click to collapse
If i'm honest with you.. i'm not sure in the slightest. My only assumption is no because the only thing I can access is only the fastboot. if i attempt to go into recovery mode it will go back to fastboot. when I flash twrp it will flash but it won't boot into it. It's confusing as hell.
Just to add to this whole situation:
Since I have no idea and just wanted it fixed in the day; i was willingly to give money for this phone to be fixed, but thanks to the person, he just made it a slower process by doing things i've already done.. going to pick the phone back up in an hour of this message.
I haven't used the fastboot boot twrp cmd yet, but from how everything else has been so far i feel like that won't work, but i will update everyone on that situation.
Just to add additional things that I may have not mentioned in the past will be below:
- Whenever i type in "ADB Devices" in cmd, it will not show up with anything. However, when I type in "fastboot devices" it shows it's serial and in "fastboot". It will only show as fastboot and i can't access the phone via file explorer in windows.
When i say "ADB Devices" it says *devices attached* and will show none of my phones details, but when i say fastboot devices it will then show the devices.
^ what i said above means I can't use the guap recover, or anything which means the phone has to be detected in windows, because other than fastboot, it won't work at all.
- So far I can't access twrp as a whole, so if anyone knows how to give me a guide on how to install it from where I am at, that would be amazing (if not, i'll try and reiterate what to do with the one given from a previous comment, so thank you )
- There was one time I was allowed in TWRP but i completely forgot how i entered it (so i can't explain), So i feel like there is hope in that aspect. I feel like i entered something via cmd so maybe there's a way?
In terms of hardware my phone is completely fine, there's not a single problem other than the software being a pain in the ***!!
if anyone can just spew out a bunch of help in different explanations it means the world because so far all I can see is that I wasted about £600 on an amazing phone because of dumb *** haha.
Thank you to everyone who has helped, and is helping
From your comments, you are not familiar with how Android functions. Not knowing the difference between adb and fastboot is an indicator that you should just endeavour to have a stock phone until you understand whats going one. It's also hard for people to help as no one has hands on and can see what is broken. Everyone here will be working blind like trying to fix your car for you from across the country.
Start the phone into fastboot and connect it to a pc. From a pc command prompt in your fastboot directory enter the command:
fastboot getvar current-slot
If the current slot is A then:
fastboot --set_active=b
or vice versa
fastboot --set_active=a
then fastboot reboot and see if you boot into the other slot.
Not knowing what phone you have makes it even tougher but I suspect you will have to reflash a clean complete rom via fastboot.
https://forum.xda-developers.com/on...fastboot-roms-oneplus-7-pro-t3931424#poststop
larsdennert said:
From your comments, you are not familiar with how Android functions. Not knowing the difference between adb and fastboot is an indicator that you should just endeavour to have a stock phone until you understand whats going one. It's also hard for people to help as no one has hands on and can see what is broken. Everyone here will be working blind like trying to fix your car for you from across the country.
Start the phone into fastboot and connect it to a pc. From a pc command prompt in your fastboot directory enter the command:
fastboot getvar current-slot
If the current slot is A then:
fastboot --set_active=b
or vice versa
fastboot --set_active=a
then fastboot reboot and see if you boot into the other slot.
Not knowing what phone you have makes it even tougher but I suspect you will have to reflash a clean complete rom via fastboot.
https://forum.xda-developers.com/on...fastboot-roms-oneplus-7-pro-t3931424#poststop
Click to expand...
Click to collapse
I do appreciate the help. If i'm honest with you the only reason I did this is to increase my data speeds (which from look of things is outdated now), and a longer battery life. I don't know much about rooting/jailbreaking but believe me that I have been in the scene for years, but not even knowing everything haha!
that being said.. i'm in twrp! thank you so much mate, i'll try and go and install the rom now. thank you!
Now install the zip twrp
Thankfully.. IT'S FIXED!
I didn't have to install twrp again or any of that. I simply changed the slot from A to B and pressed all buttons when it was showing the "! Your decide is unlocked" orange/black screen.
I had msm tools up and it detected and instantly installed the OS to the latest one and boom. It works again!
I got to thank everyone for helping me because without you people I wouldn't of been able to fix it. I looked everywhere and no help anywhere as I feel like it's pretty dumb to do what I did haha!
Thank you again people!
Oh you gave up on root?
You are supposed to read the instructions and follow them to the letter. When I read your post I realized you tried to install twrp like you would pre Oreo but it changed you have to boot into twrp then install it via zip file.
Anyways just remember that for next time.