Related
Just joined to say thanks to Roebeet and everyone who is active in this forum. Because of the obvious potential of the gtablet being explored here, and discussed on phandroid.com I decided to take the plunge and purchased one tonight. I might have passed this tab by, and waited months for something else...
--and here's where I cry for help!
I carefully followed a series of step-by-step instructions I found thru google, to install the latest tnt lite found here on XDA. Everything seemed to work without a hitch, and was prouder than a pappa to have completed my first root and mod ,ever!
BUT right after I DL'ed and installed the flash 10.1 apk things went south. The browser constantly crashed to the home screen, and the market and email apps were crashing also. I rebooted and now I am greeted by the tnt setup screen that is covered in an endless wave of crash warning dialogs! I can't tap them away fast enough to see the desktop.
I've tried to do a recover, but I can't get thru the setup (that keeps crashing to the first screen also) to use the USB to mount the internal mem to my Mac.
I am insanely happy about the potential of this hardware, but I've painted myself into a corner. ANY help would be greatly appreciated.
And yes, I do look very handsome in my profile pic.
From bad to WORSE!
I discovered the dcom222 thread that describes my problem and details a solution. I followed it to the letter, changing the command and using my microSD as a secondary boot to reinstall the vanilla tnt ROM.
But then it just stuck on the tnt logo, faded in and out 3-4 times, and went dark! The device won't turn on or off (had a full charge when I pulled it from the wall socket a few moments ago)
Please tell me I haven't bricked this thing!
still no luck...
I was able to power the unit back up, but I've tried to recover and flash all three setup files I have (vanilla tnt, ota update tnt and tnt lite 2) but nothing works!
All of them create a loop of some sort, whether it's the viewsonic screen, gtablet screen loop, or the tnt logo screen blinking on and off, NOTHING boots to the desktop.
Going to bed before I drive my self insane. Hopefully someone in the know will reply by the time I check this at work.
thanks in advance
You have not bricked it, don't worry. This device is very hard to truly brick. If all else fails there is nvflash or the apx mode fallback. But I don't think you need that if you are still able to boot to clockwork recovery.
In clockwork go to advanced - mounts and try mounting and unmounting your partitions. I suspect your user partition may be screwed. This seems to happen fairly frequently especially the first time you flash a ROM. It happenend on my first flash and not again since. Clockwork lets you repartition though. Search the forum for partition fix, its not too big a deal.
If that fails try roebeet's thread on nvflash recovery for TNT lite. If that fails, search for APX mode.
As far as I know there are zero bricks from ROM flashing so far.
Sent from my SMB-A1002-3G using Tapatalk
Life in LA said:
Just joined to say thanks to Roebeet and everyone who is active in this forum. Because of the obvious potential of the gtablet being explored here, and discussed on phandroid.com I decided to take the plunge and purchased one tonight. I might have passed this tab by, and waited months for something else...
--and here's where I cry for help!
I carefully followed a series of step-by-step instructions I found thru google, to install the latest tnt lite found here on XDA. Everything seemed to work without a hitch, and was prouder than a pappa to have completed my first root and mod ,ever!
BUT right after I DL'ed and installed the flash 10.1 apk things went south. The browser constantly crashed to the home screen, and the market and email apps were crashing also. I rebooted and now I am greeted by the tnt setup screen that is covered in an endless wave of crash warning dialogs! I can't tap them away fast enough to see the desktop.
I've tried to do a recover, but I can't get thru the setup (that keeps crashing to the first screen also) to use the USB to mount the internal mem to my Mac.
I am insanely happy about the potential of this hardware, but I've painted myself into a corner. ANY help would be greatly appreciated.
And yes, I do look very handsome in my profile pic.
Click to expand...
Click to collapse
Scroll down to post number #869 http://forum.xda-developers.com/showthread.php?t=842004&page=87
feeling better
Thanks for the assurances that I didn't wreck the device, and pointing me to some solutions. I have a few questions:
what is clockwork mod? If I am able to recovery boot from my micro SD card, do I already have it? (I downloaded a bunch of recovery images to start, per instructions)
If it's something I still need to download, is it a PC application? How am I supposed to change settings in it (manage partitions, etc) if I can't get the tablet to boot?
-- stuck at work and dying to get home to fix this thing...
Ok, more detailed instructions:
If you press and hold down Volume + when you are pressing the Power button to boot up, and keep holding the Volume + key until you see a message that says "Detect a Recovery Key Pressed", that should get you to a text menu from which you can navigate using the volume +/- keys and the Home soft button to flash ZIP files and do other things. That menu is ClockworkMod Recovery. Since you remember installing a recovery.img, it sounds like you probably (hopefully) have ClockworkMod Recovery on there.
If you get to ClockwordMod Recovery, you can go down to the Mounts and Storage option, then you will find the "Mount USB storage" option at the end of that list. That lets you plug in and mount your internal memory area as a standard USB drive to your Windows or Mac computer to copy over new ZIP files and the like to your G Tablet.
You can also check that partitions are all mounting and unmounting successfully in that menu. If you go instead into the Advanced menu, you will see Partition SD Card, which I believe is what you might need to do at this point.
If booting with the Volume + button held down doesn't get you anywhere and you see nothing about Recovery Key Detected and don't see any text menu, then you don't seem to have a working recovery. At that point you'll have to do what phfaty suggested, read the post he referenced, and follow the link therein to the tegratab forum post to get the NVidia Tegra SDK installed on your Windows desktop and use the NVFlash tool and APK mode (where you hold the Volume - key down while booting instead of the Volume + key) to reflash your tablet.
still not working...
The good news:
I do have clockwork mod installed. Must have been in 1 of those zips or rars I ran in the very beginning.
The bad news:
it's still caught in a boot loop. I've mounted it as an external drive 3 times now from clockwork, and tried all 3 versions of the operating system (vanilla, vanilla with the ota and tntlite 2) and NOTHING makes a difference.
Life in LA said:
The good news:
I do have clockwork mod installed. Must have been in 1 of those zips or rars I ran in the very beginning.
The bad news:
it's still caught in a boot loop. I've mounted it as an external drive 3 times now from clockwork, and tried all 3 versions of the operating system (vanilla, vanilla with the ota and tntlite 2) and NOTHING makes a difference.
Click to expand...
Click to collapse
1)Boot into clockwork.
2)Navigate to Advanced menu
3)Choose partition sdcard
4)Choose data partition desired size(1024=1GB)
5)Choose 0GB for the next selection(swap not used)
6)Do a factory reset from main menu
7)Reboot
8)If that doesn't work, then reinstall ROM, then reboot
UPDATE
partitioning the drive and wiping the user data did the trick. I'm up and running again. thanks to all who chimed in to help.
Yesterday my phone started acting up. All running process crashed and not many was able to start. I had to constantly click "force close". I think this started after I installed the Google+ app, but not sure.
I have tried uninstalling all unnecessary apps, without luck. I then tried wiping to factory settings by using the Android menu, but without any changing. I then tried by holding vol+ and power, going in to recovery and wiping both to factory and app cache. This doesn't change anything either. By googling I can see some suggests to hold vol- and power, to get to a another wiping-functionality but this just boots my Nexus S to normal state - no menu appears.
Has anybody an idea of what I can do?
Edit: more info; if I click "Report" and investigate the message sent to Google, I see that error has something to do with SQLite-relatet classes. Which makes some sense, alot of my changes are reset each time the phone is rebooted. For instance did I miss a call a couple of hours before the phone went crazy - this is shown at each boot in the notification area eventhough I clear the area and/or goes to missed call section
Factory reset via menu does delete all your "custom" apps, so I'd say it's not one of the existing apps causing problems.
The way you describe function after your factory reset sounds like factory reset didn't work properly.
If you feel safe I'd recommend rather flashing 2.3.4 again using either Odin or the OTA zip from Google (requires open bootloader).
I think you're right that factory reset doesn't do what is expected. Once I click it, the phone reboots and shows the Android guy next to an unwrapping package. This lasts only 2 seconds, then it reboots itself again and goes into normal phone mode (where all the app-crashing starts again).
I have not flashed or rooted my phone before, but I will consider this now since my NS is pretty much a brick. Thank you for your swiftly response.
Edit: Shouldn't I get a menu, when I push and hold vol- button, while turning on the device? Right now it just boot as normal.
Before you use odin....try going into rom manager a reflashing clockwork! Ive had that android dude on my screeen but reflashibg via rom manager always fixed it. Try that
Sent from my Nexus S using XDA Premium App
Wow my Nexus has totally shut me out.
I cannot use ClockworkMod unfortunately since I am not able to root my phone. It is not detectable via USA (when I use vol+/pwr and connect USB). I am unable to check the USB Debugging option on the phone. Each time I check it, go to home-screen and back to the menu, it has de-selected it again. Also I noticed when I read the info that is sent to Google for all those app-crashes I get, I see SQLiteException and error in an SQLite.java file. So it seems like some database layer is broken.
I read one could copy the ClockWork.img to my phone and use the standard recovery option to flash the img (I think). But when I go into the recovery menu, the file is gone. When I boot the phone again, it has deleted the .img file - eventhough if I copy it to several different folders, they are all gone :-(.
I feel pretty screwed at the moment. How can I else wipe all data?
I'd recommend to check if your device is correctly identified in windows. Missing USB drivers might cause problems. Get the latest drivers and a guide from here.
If you succeed booting into fastboot properly (vol up and power) you can follow this guide. Get the latest cwm recovery.img here.
Last option would be to boot into download mode (vol up + vol down + power + plugging in usb cable) and use Odin from samfirmware.com
--
All options require correctly working USB drivers.
I managed to unlock the bootloader, by quickly turning on USB-debugging (before any processes started to crash) and install the drivers from this post:
http://forum.xda-developers.com/showpost.php?p=6819751&postcount=4
A reboot later, I got this message:
"System UIDs Inconsistent
UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable."
Right below was a button saying "Im feeling lucky" (??)
I installed ClockworkMod using fastboot and tried "Fixing permissions" with no luck. I will try some ROM later on, and hope it will bring my phone back
Normally this error happens when you have a faulty app ruining your system, formating/deleting whole sdcard does usually fix this.
rentaric said:
Normally this error happens when you have a faulty app ruining your system, formating/deleting whole sdcard does usually fix this.
Click to expand...
Click to collapse
I can safely mount USB-storage and format the whole bunch?
I been sweating over this stupid issue all day now, all I want is a fac-reset :´(
Edit: "format /sdcard" using CWM didn't do anything
DennisRP said:
I can safely mount USB-storage and format the whole bunch?
I been sweating over this stupid issue all day now, all I want is a fac-reset :´(
Edit: "format /sdcard" using CWM didn't do anything
Click to expand...
Click to collapse
See I'm no expert on this whole thing. At this point I'd just flash a whole new system via Odin. Prolly not the smartest or safest option, but that's what I'd do because I don't know better. If that wouldn't fix it either, I'd return the phone on warranty
I was looking at Odin from the start, since nothing else seemed to be working.
So right now I got started on Odin. Followed the .pdf steps and flashed the bootloader at first succesfully. I was asked to remove the battery and re-connect my NS. Began downloading "pda" and "phone", but at around 10% a big fat red "fail" message appeared and now I just see the Google-logo on startup. I still cant flash any roms via fastboot.
Im too tired too right now, been working with this for 14 hours straight. I will look at it tomorrow evening. Thanks for your help rentaric
Weird, you're not the first one who had trouble running Odin using their guide.
Overall it's pretty simple.
Enter download mode. Vol up vol down and power at the same time while plugging in the USB cable. Start Odin, should show a yellow colored box with a port number. Uncheck everything but reset timer and auto reboot. Unzip the correct zip file from samfirmware.com (check if you got i9020 or i9023 and get the universal Odin exe), apply file from the folder accordingly. Bootloader and bootloader. Phone and modem. Pda and pda. Csc can remain empty (will change carrier info in fastboot).
Double check md5 hash to avoid broken files.
Sent from my Nexus S using XDA App
rentaric said:
Weird, you're not the first one who had trouble running Odin using their guide.
Click to expand...
Click to collapse
Of course I did not go to bed, how should I be able to sleep with a broken phone .
The firmware suggested on samfirmware.com for my phone, was 2.3.3 and some other version (my phone was 2.3.4.2/GRJ22 or something similar, I suspect that might be the cause. Also I unchecked everything, that might also have been of importance). The flash will always fail when everything was downloaded - it then said something about "remote" and "Loke" and then fail. But as I mentioned, I had succesfully flashed boot.img (2.3.3) thus no boot occured now. I googled the correct bootloader, used fastboot and was booting succesfully again.
I began looking more into the sdcard, as error-messages was leading me this way. To compress 4 hours of investigations into a few lines, it seems as my PBA is malfunctioning as other xda-members have experinced. Only solution is sending the phone to Samsung for a PBA replacement. I purchased the phone in Bestbuy USA and the danish Samsung partners are not too joyfull about this - I will contact Samsung and hope they can help me.
I experinced the exact same thing as this poor guy - http://forum.xda-developers.com/showthread.php?t=993403
Every thing you try to do to /sdcard is worthless.
Formatting (USB/using CWM/using adb shell linux commands) says "Succes" but nothing happens.
Copying files says "Succes" but nothing happens. If I boot phone into CWM, mount usb and upload new rom/apk/whatever and try to do a "install update.zip" it fails with some mounting errors.
Im ready to go cry in a corner - I really want this to be fixable via software, but I probably have to realize that this is a hardware issue.
Apparently Samsung doesn't offer worldwide warranty for cellularphones :´(. God it sucks to pay repair-expenses on a 1 month old mobile.
Hey guys,
Forgive me for being frantic and (probably) not taking the steps needed to research this issue, or not taking the time to do so, but I'm sure you can all presumably imagine -if you've not been in this situation before- that it SUCKS not having a phone in this day in age...
My problem: Atrix 2 (Rooted + CWM Recovery) now won't boot passed the "M" Motorola logo upon start up. It won't even allow me to access the factory Android Recovery by holding down Volume Up, Volume Down, and Power. I think I inadvertently bricked the phone? (Hope not!)
Further, the "M" Motorola logo is skewed in appearance, like its not even loading correctly. I'm not sure what to do. This is my first time rooting and getting experienced with custom ROMS.
Anyone able to help this helpless sap?
Thanks is advance to your replies...
Step 1 is where you tell what you did to get into the state you are in. You wouldn't believe how far it goes toward fixing something if you know how it got broken.
Sent from my MB865 using XDA
If you have CWM recovery on boot can't you just do a battery pull? You do NOT want to let that thing bootloop forever until the battery dies.
The End.
KEB64 said:
If you have CWM recovery on boot can't you just do a battery pull? You do NOT want to let that thing bootloop forever until the battery dies.
The End.
Click to expand...
Click to collapse
Agreed pull the battery. If you run out of juice you'll be in some serious trouble.
Did you try to flash the fkz? Unless you have CWM on Boot it's the only way you can get your phone working.
Okay, sorry for not giving a full rundown on what stupidity on my part cause all of this. Let me start by saying that (sadly) I am a great big n00b when it comes to Linux, and I thought that despite my research online I would sort of explore the CWM Recovery 'Advanced' sections.
I downloaded ROM Toolbox from the Play Store, and installed a custom boot animation, and replaced -or thought I was- the startup "M" logo with something else. This is what concerned me: After re-booting, the "M" logo was all crazy looking, with a "stretched" "M" logo over the top of the "regular" logo.
So, I uninstalled the app, but the logo was still all messed up. So, I used Root Uninstaller to get rid of the ROM Toolbox files, still no resolve to the crazy boot logo.
So, I went into CWM Recovery Advanced, and wiped everything. The Dalvik, cache, System, Data, etc... didn't think that it would -what appears to have happened- wipe out the OS on the phone.
I tried pulling the battery, and re-booting, won't boot passed the skewed "M" logo still. Tried getting into Android Recovery, and it looks to go through the recovery goes through its thing, but never boots normally afterward.
Sorry for being such an idiot, I really shouldn't have messed with this while half asleep, and again I can't apologize enough for being such a stupid n00b.
I can attach an image of the boot logo if that helps, but I'm worried I am just S.O.L. at this point...
Also, not sure what an FKZ is. I tried to install a 2.3.6 apk file to my wife's SD card on her phone and booting from the file after putting the SD card into mine. Still nothing.
pull the battery, put it back in, and hold vol up and down while turning on. choose ap fastboot at the menu. go to the thread in my signature and under the mirrors there is also a download of the return to stock script. run it while in fastboot and plugged in with usb. DO NOT pull the chord until it is done. when it is you should be good.
Apex_Strider said:
Okay, sorry for not giving a full rundown on what stupidity on my part cause all of this. Let me start by saying that (sadly) I am a great big n00b when it comes to Linux, and I thought that despite my research online I would sort of explore the CWM Recovery 'Advanced' sections.
I downloaded ROM Toolbox from the Play Store, and installed a custom boot animation, and replaced -or thought I was- the startup "M" logo with something else. This is what concerned me: After re-booting, the "M" logo was all crazy looking, with a "stretched" "M" logo over the top of the "regular" logo.
So, I uninstalled the app, but the logo was still all messed up. So, I used Root Uninstaller to get rid of the ROM Toolbox files, still no resolve to the crazy boot logo.
So, I went into CWM Recovery Advanced, and wiped everything. The Dalvik, cache, System, Data, etc... didn't think that it would -what appears to have happened- wipe out the OS on the phone.
I tried pulling the battery, and re-booting, won't boot passed the skewed "M" logo still. Tried getting into Android Recovery, and it looks to go through the recovery goes through its thing, but never boots normally afterward.
Sorry for being such an idiot, I really shouldn't have messed with this while half asleep, and again I can't apologize enough for being such a stupid n00b.
I can attach an image of the boot logo if that helps, but I'm worried I am just S.O.L. at this point...
Also, not sure what an FKZ is. I tried to install a 2.3.6 apk file to my wife's SD card on her phone and booting from the file after putting the SD card into mine. Still nothing.
Click to expand...
Click to collapse
Yeah wiping the system partition is a no no unless you flash another rom afterwards. Do like ikrasner says and you should be back to normal.
Sent from my MB865 using XDA
Thanks for all the help guys, I really hope that something positive comes about this... though, to go without mention, I certainly need more knowledge on WTH I am doing to my phone: understanding flashing ROMS, what dangers come with rooting, and a vast array of other "all things root" that I need to learn up on.
I will try to install from SD card the 2.3.5 zip tonight, but will it (the phone) look for the newest 2.3.6 OTA update and try to ask me to install? How does that work after rooting, will I re-brick my clearly bricked phone all over again?
As always, thanks for all your replies in advance -you guys really know what's going on here!
can you read chinese?
Maybe I can solve your question,but poor of my english.
and what is your phone type?
at&t hktw or china ?
Sent from my ME865 using xda premium
Apex_Strider said:
Thanks for all the help guys, I really hope that something positive comes about this... though, to go without mention, I certainly need more knowledge on WTH I am doing to my phone: understanding flashing ROMS, what dangers come with rooting, and a vast array of other "all things root" that I need to learn up on.
I will try to install from SD card the 2.3.5 zip tonight, but will it (the phone) look for the newest 2.3.6 OTA update and try to ask me to install? How does that work after rooting, will I re-brick my clearly bricked phone all over again?
As always, thanks for all your replies in advance -you guys really know what's going on here!
Click to expand...
Click to collapse
It should ask you to install 2.3.6. Just go into setting>about phone>check for updates. Or you could go and install one of the roms that are based on 2.3.6 such as Lithium Sonya or SCv5.
Okay gang, perhaps I'm just certifiably dumb, or I am simply just not doing this correctly. I downloaded the "Returntostock2.3.5.script" zip file and copied it to my wife's SD card to 'apply update from sdcard' option from the Android Recovery area by holding Vol Up, Vol Down, & Power buttons. What I got was this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
I tried to just plug the USB into the phone and run the 2.3.5. script from there. but again- I'm stuck in the crazy skewed "M" logo startup screen with nothing following. That's all the phone will do at this point, other than my getting into Android Recovery.
I'm not sure how or what fastboot is, or how it works. If the phone is plugged into the USB, it will only boot the stupid screwed up "M" logo screen. Noting else.
Apex_Strider said:
Okay gang, perhaps I'm just certifiably dumb, or I am simply just not doing this correctly. I downloaded the "Returntostock2.3.5.script" zip file and copied it to my wife's SD card to 'apply update from sdcard' option from the Android Recovery area by holding Vol Up, Vol Down, & Power buttons. What I got was this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
I tried to just plug the USB into the phone and run the 2.3.5. script from there. but again- I'm stuck in the crazy skewed "M" logo startup screen with nothing following. That's all the phone will do at this point, other than my getting into Android Recovery.
I'm not sure how or what fastboot is, or how it works. If the phone is plugged into the USB, it will only boot the stupid screwed up "M" logo screen. Noting else.
Click to expand...
Click to collapse
do not flash this. unzip it on your computer, choose to boot into fast boot in the same place you chose recovery, then run the .bat file that was in the zip.
Sent from my MB865 using XDA
What that file does is reflash your system.img, basically restoring your phone to factory default. And just as a sidenote you cannot flash things with the standard Android Recovery. You need CWM.
did you try apboot mode and ise fastboot to flash system.img ?
Sent from my ME865 using xda premium
Still not working... not sure how to flash from fastboot. I don't have any options to run a file from there, or at least not sure ow to go about that.
Fastboot sample, hope will help you.
http://bbs.gfan.com/mobile/android-3701449-1-1.html
Sent from my ME865 using xda premium
dickluo said:
Fastboot sample, hope will help you.
http://bbs.gfan.com/mobile/android-3701449-1-1.html
Sent from my ME865 using xda premium
Click to expand...
Click to collapse
So, if I'm looking at this correctly, I need to open command prompt from my computer, and type the commands in from there?
I don't think my computer is recogzining the phone in any way, as I cannot get into the 'manage usb connections' options.
If I have the 2.3.5.script downloaded on my desktop, and l plug my phone in after launching AP Fastboot on the phone, will the computer know where to flash the file to?
I know, I'm a dolt... please bear with me, I really need to get this thing working again -I feel naked without my phone!
Apex_Strider said:
So, if I'm looking at this correctly, I need to open command prompt from my computer, and type the commands in from there?
I don't think my computer is recogzining the phone in any way, as I cannot get into the 'manage usb connections' options.
If I have the 2.3.5.script downloaded on my desktop, and l plug my phone in after launching AP Fastboot on the phone, will the computer know where to flash the file to?
I know, I'm a dolt... please bear with me, I really need to get this thing working again -I feel naked without my phone!
Click to expand...
Click to collapse
Before using the restore script you need to install the usb drivers for your mb865, you can get those from here: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/MotoHelper_2.1.40_Driver_5.5.0.exe
Next unzip the Return to Stock 2.3.5 Fastboot SCRIPT.zip to anywhere you like in your pc (example: C:\RestoreScript\ )
Next connect your phone with the usb cable to the pc and get into fastboot mode for this in your phone press volume down + volume up + power it should appear a screen with some options, use the volume down key of your phone to navigate through the menu until you see the Fastboot option, then enter by pressing the volume up key, this will show you some messages and the finally it should said usb connected.
Then open the folder where you extracted the Return to Stock 2.3.5 Fastboot SCRIPT files and search a .bat file call "Stock Restore" then run the file (double click on it) and it should open a command promt screen with some instructions if the phone is connected correctly and you installed the drivers correctly then in some point the screen will show you the id of your device and it will wait you to press the enter key to start the proccess, press key enter wait all the proccess until the program said to you its finished, after that it will reboot your phone and install the stock 2.3.5 when it boots up you should see the android logo and a progress bar filling up.
when it's done wait the reboot and your phone should be ok.
hope this helps.
jfrank1485 said:
Before using the restore script you need to install the usb drivers for your mb865, you can get those from here: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/MotoHelper_2.1.40_Driver_5.5.0.exe
Next unzip the Return to Stock 2.3.5 Fastboot SCRIPT.zip to anywhere you like in your pc (example: C:\RestoreScript\ )
Next connect your phone with the usb cable to the pc and get into fastboot mode for this in your phone press volume down + volume up + power it should appear a screen with some options, use the volume down key of your phone to navigate through the menu until you see the Fastboot option, then enter by pressing the volume up key, this will show you some messages and the finally it should said usb connected.
Then open the folder where you extracted the Return to Stock 2.3.5 Fastboot SCRIPT files and search a .bat file call "Stock Restore" then run the file (double click on it) and it should open a command promt screen with some instructions if the phone is connected correctly and you installed the drivers correctly then in some point the screen will show you the id of your device and it will wait you to press the enter key to start the proccess, press key enter wait all the proccess until the program said to you its finished, after that it will reboot your phone and install the stock 2.3.5 when it boots up you should see the android logo and a progress bar filling up.
when it's done wait the reboot and your phone should be ok.
hope this helps.
Click to expand...
Click to collapse
jfrank1485,
This stepped me through the entire process without any confusion! Everything is back to normal! Hooray and three Huzzahs!
Also, many many thanks to dickluo, farshad525hou, lkrasner, mtnlion, and KEB64!
You guys really saved my stupid (you know what) on this deal! Next order of business: figure out what the heck I am doing before doing ANYTHING!
Problem solved, my world has regained sanity, and my phone is back to life!
You guys are the best, thank you all so much!!!
Apex_Strider said:
jfrank1485,
This stepped me through the entire process without any confusion! Everything is back to normal! Hooray and three Huzzahs!
Also, many many thanks to dickluo, farshad525hou, lkrasner, mtnlion, and KEB64!
You guys really saved my stupid (you know what) on this deal! Next order of business: figure out what the heck I am doing before doing ANYTHING!
Problem solved, my world has regained sanity, and my phone is back to life!
You guys are the best, thank you all so much!!!
Click to expand...
Click to collapse
I'm glad it work , keep it at hand before doing anything to your phone, it really helps
Hi there,
I need some help here. My wife's Sprint Nexus S is acting up - keep popping messages such as "Unfortunately XXX has stopped." So I decided to do a hard reset. I followed the instructions but weirdly the phone did not do it. It acted like doing the hard resetting but then rebooted with nothing changed. I tried both the software way - Settings, factory reset, and the hardware way - Vol up button + Power, then recovery, then Vol up + Power again at the Android with exclamation image, chose "Wipe all data and factory reset." However, the phone boots with nothing changed.
Can anyone help me with this? What else can I try?
Thanks much in advance.
<DELETED>
You could try fixing the permissions on the files through Rom Manager; it fixes a lot of Force Close generally.
kwudude said:
Have you tried installing a custom recovery and doing a hard reset through that route yet? E.G. ClockworkMod or TWRP
Click to expand...
Click to collapse
Thanks. I will give it a try. Can you point me to some instructions / files for downloading, etc.?
Cpu.gastronomy said:
You could try fixing the permissions on the files through Rom Manager; it fixes a lot of Force Close generally.
Click to expand...
Click to collapse
This one is actually the Sprint stock rom untouched. So... no Rom Manager on it. Thanks anyway. I guess a custom recovery is the only way to go now...
<DELETED>
I wouldn't install a custom recovery, and ultimately technically void your warranty, for the sole purpose of resetting it though...
Just use a one click root tool, it flashes superuser, cmw, but keeps the rest of the (stock) rom you're on!
---===:::Greetzz, jojoost:::===---
Sent from my iPad using Tapatalk HD
Thanks to you all for all the good suggestions. I have tried several things but did not succeed.
1. Flashed a clockworkmod recovery. That was successful. So I went ahead to use its factory reset function. The process completed without error but once rebooted, the phone remains the same as before.
2. Connected the phone to a PC, turned on USB storage, copied a ROM image zip file to a folder. Then tried to install it through Recovery. But the file I copied was nowhere to be found.
3. Put then phone into the bootloader mode, connected to PC, use fastboot to flash boot, system, recovery, userdata, radio image files. All went through with any issue. Rebooted, phone is the same.
In short, whatever I do, the phone remains the same. No changes can be made.
I also tried the one-click tool but could not proceed ahead. It required USB debugging turned on. I turned it on, the check mark was there, but it was really NOT turned on because on the PC, the message is that it is not on. On the phone, if I switch to a different application, or simply go back one step, and then go to developer option, the checkmark was not turned on.
It feels like the internal memory/storage becomes read-only. No changes can be made. I am not sure if the hardware is bad, or some permission issue.
Any ideas that I should try next?
From what I read and understand, I think I had a bad nand problem. Guess time to let the phone go RIP.
Hello, I'm about to giving up,
Something happened to the phone and now it won't boot, it barely show the "ANDROID" logo when it restart itself. I can enter to the recovery menu, it doesn't have clockwork recovery nor twrp, just the basic recovery. So far I tried:
wipe data/factory - didn't work.
wipe cache partition - didn't work
apply update from adb: Adb just work with sideload and that's it, for everything else it shows closed. I tried sending the rom with sideload and it fails every time:
* failed to write data 'protocol fault (couldn't read status): Invalid argument' *
So I took my sdcard and copied the room there, so I tried
apply update from sdcard, it starts and in no time it says:
Installation aborted (APPLY_EXT).
I'm very frustrated right now, nothing works, it seems that the manufacturer did great effort on being the only one who can recover this phone, who appears to be from China, the MTK6582.
Fastboot? it doesn't show the device, it would be my last hope but no, since there is no adb, I cannot call fastboot, and the apply update from adb only work with sideload (yeah, f**k me).
The best course of action would be to throw it to the trash?
Thanks!
Hey, I'm in a similar position to you. However, I went about it with a slightly different route. The chip used in this phone is the MediaTek 6582 (I think?). I downloaded some tools from a thread on here that includes the 320 rom and the necessary software for flashing. I've flashed MediaTek devices before, the Huawei Ascend G610 and G700, both successfully. This one is giving me headaches, the damn device keeps disconnecting. HOWEVER, if you're lucky and you don't have the same problem with disconnecting hardware, you should be able to flash a new rom via the software. It'll take a while though. Also, I don't know what'll happen to your IMEI afterwards, so that's another possible headache (both the G610 and the G700 lost their IMEI info, but I'd taken steps to back them up beforehand so I could just restore them; here, there's no option to backup).
Here's the thread: http://forum.xda-developers.com/android/general/htc-mtk-cpu-flash-files-flashtool-t3114271
Let me know if you need help. I'm screwed in that the damn phone keeps disconnecting. Similar to you, no fastboot either. Plus, no RUU for this HTC. Hell, the internet barely knows this flipping phone.
Cheers, and good luck.
blitz9826
0Camus0 said:
Hello, I'm about to giving up,
Something happened to the phone and now it won't boot, it barely show the "ANDROID" logo when it restart itself. I can enter to the recovery menu, it doesn't have clockwork recovery nor twrp, just the basic recovery. So far I tried:
wipe data/factory - didn't work.
wipe cache partition - didn't work
apply update from adb: Adb just work with sideload and that's it, for everything else it shows closed. I tried sending the rom with sideload and it fails every time:
* failed to write data 'protocol fault (couldn't read status): Invalid argument' *
So I took my sdcard and copied the room there, so I tried
apply update from sdcard, it starts and in no time it says:
Installation aborted (APPLY_EXT).
I'm very frustrated right now, nothing works, it seems that the manufacturer did great effort on being the only one who can recover this phone, who appears to be from China, the MTK6582.
Fastboot? it doesn't show the device, it would be my last hope but no, since there is no adb, I cannot call fastboot, and the apply update from adb only work with sideload (yeah, f**k me).
The best course of action would be to throw it to the trash?
Thanks!
Click to expand...
Click to collapse
Ditto!!!
Hey guys I am having the exact same issue, luckily for me it is my Mrs who done her phone in and not mine . She has the HTC Desire 320, I believe she tried to root it on her own without even asking for advice, I think she used the app Kingo Root, she said she went to remove the root but when she uninstalled the app it didn't remove it. (LOL I told her well perhaps that's because there will be some way of removing it, aside from just uninstalling the app), anyway she proceeded not to care and carried on using her phone as normal for maybe a week or two at most, then about midnight one night, came down and said to me,
"my phone had an update and on restarting I just get a dead android, if you press the power button you get some options so I clicked erase"
Click to expand...
Click to collapse
I was like nice so basically you F***ed it!!!!, and for about 2 weeks now I have been endlessly reading post after post, forum after forum, trying rom after rom, RUU, all kinds of things.
Here is the situation, the phone will boot as far as the HTC logo, it will get stuck in a short loop and reset itself 4/5 times repeating the HTC logo, eventually it will end up at the dead android pic (the android on his back with the red exclaimation mark triangle) with the words 'no command'. From here I can press the power button once to get a list/menu of items (What I assume to be the recovery menu). I can backup data, I can restore the backed up data (both of which do nothing as I guess there is nothing really to back up), There is an option to restore from sd card (which I have tried numerous roms and to no avail have any been successful), I can erase the cache and I can also erase everything and recover, the erase side works fine, I did notice in each of these menu that if you press volume up to activate them and then press the power button once, then the writing dissapears and the android proceeds to have his moving atom type thing in his belly, saying 'erasing..', however even with them completed successfully, it still does not restore.
NOTE!!! If you choose the erase and restore method, once activated with volume up, press the power button to get the spinning atom and erasing... message, when this finishes the phone will reboot, it goes to the htc logo, resets itself, goes to the logo again and then just stays at a black screen (almost like a frozen state, I left it for quite some time and it never changed).
I should also note, which I didn't to begin with, but no matter how long I hold the volume down and power button, there is no such hboot/fast boot menu at all, if you hold the volume down and power button even after it displays the htc logo, the phone just proceeds to endlessly reset and loop through the same process forever.
The only thing I can seem to access with little success, is the ADB CMD prompt through the Android SDK,
Code:
adb devices
will indeed return the device (a set of numbers with the word sideload beside it)
Code:
adb usb
Apart from the odd fluke, this has seemed to fail everytime with either an error about a protocol or an error stating 'closed'
Code:
adb sideload "ROM_FILENAME.ZIP OR .IMG
Occasionally this will throw the protocol error, but generally succeeds and displays the 100% most of the time, however the phone doesn't even try, it just almost instantaniously returns the error message :
Code:
[B][I]Installation Aborted (APPLY_ADB_SIDELOAD)[/I][/B]
NOTE!!! That the android lays on his back with this error, but it only says error below not no command.
I am pretty sure that I already came across a solution very similar to the one you posted above, and I just couldn't get it to recognise the phone, the only way the RUU would work, was by completely removing the battery and plugging in the usb, however without the battery in the phone, it just constantly beeps via usb, so I guess it turns on, then off, then on, then off, forever!!! So the RUU fails everytime, if I leave the battery in and try, the RUU program does nothing whatsoever! So I am at a complete loss with it now.
Cheers
GunnerJnr
Any luck with unbriking the HTC?
Maybe this is the solution, good luck.
Search: How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD] on Youtube
Responds please.
http://forum.xda-developers.com/showpost.php?p=64659997&postcount=16
I think that you no tell true because I tried this method with volume keys and nothing. Flash tool still show error. Its impossible to write android without battery. I think really put your phone to rubbish or sell as lcd+digitizer parts I think just we must waiting for new custom rom flashable via stock recovery. 320 is still new model and developers no moke any custom rom. So maybe only HTC service may help, only in HTC Factory peoples know how install android and bootloader on hard bricked device.