Q&A for [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lord Boeffla said:
Hi all,
3.0-beta3 is now ready for you (both n8000 and n801x variants).
Change log is the same for both kernels.
Version 3.0-beta3
22.10.2014
Update zzmoove to version 1.0-beta1 (credits to ZaneZam)
Update exFat driver to 1.2.9
Update the flash binary in the boeffla-kernel-reset recovery script, bump to version 3.1
Enjoy
Andi
Click to expand...
Click to collapse
It sjust awesome
help to find kernel n8013
Someone.. anyone.. where can i find this kernel ? a download link would great.. thanks in advance..
3.0-beta3 is now ready for you (both n8000 and n801x variants).
Change log is the same for both kernels.
Version 3.0-beta3
22.10.2014
As always... Read the op.
Then you will see everything is here:
www.boeffla-kernel.de
Andi
hello I'm New On Android, I want to ask regarding flashing the kernel ...
Do I need to run Kernel cleaning Script Afterflashing the kernel? Thanks
Sent from my GT-N8000 using Tapatalk
Araragi said:
hello I'm New On Android, I want to ask regarding flashing the kernel ...
Do I need to run Kernel cleaning Script Afterflashing the kernel? Thanks
Sent from my GT-N8000 using Tapatalk
Click to expand...
Click to collapse
Hm... are you talking about leaving Boeffla-Kernel or moving to Boeffla-Kernel?
If you leave Boeffla-Kernel, you do not need to use any cleaner script. Boeffla stores everything under /data/.boeffla, and this cannot be used by any other kernels.
If you move to Boeffla, also usually no cleaning before required.
Only exception: If you were on a kernel before that stored all his configuration into init.d scripts, then you should cleanup your /system/etc/init.d folder before flashing Boeffla.
That's all however.
Andi
Where can I find ur beta version of the kernal and how can I flash it...im using gnabo rom..could u plz guide me through
w_ayon said:
Where can I find ur beta version of the kernal and how can I flash it...im using gnabo rom..could u plz guide me through
Click to expand...
Click to collapse
All you need is on the homepage, as stated in the OP of all kernel threads.
www.boeffla-kernel.de
Andi
ALL: Google is again playing games and locked down the first of my 3 donation apps in Playstore. Of course no compelling reason provided.
But as I already prepared for that half a year ago, I would like to remind you to use your personal unlock key to gain donation functionalities.
If you have not yet generated (this can be done in the donation app itself) and entered it into Boeffla-Config, it is now urgent to do that!!!
I cannot ensure Google will not lock down the other two donation apps as well soon, so you should be prepared now.
From my side, next Boeffla-Config app version will not support these donation apps anymore but only personal unlock codes.
Also, I will replace remaining donation apps in Playstore very soon (today or tomorrow) with a dummy app that tell users to get in touch with me manually.
Thanks for understanding... and alohas Google, all done wrong, guys there.
Cheers
Andi
Hi all. I have a gnabo rom v7 on my n8000. Can I install this kernel to my device? Android version is 4. 4. 2. Thanks beforehand.
sarvar97 said:
Hi all. I have a gnabo rom v7 on my n8000. Can I install this kernel to my device? Android version is 4. 4. 2. Thanks beforehand.
Click to expand...
Click to collapse
Absolutely, take latest 3.0-beta version for your device (n8000, not the n801x version).
Andi
Lord Boeffla said:
Absolutely, take latest 3.0-beta version for your device (n8000, not the n801x version).
Andi
Click to expand...
Click to collapse
Thanks a lot, the kernel is fantastic.
Hi from Russia. Excellent operation! I tried to pay, but my payment system of it doesn't allow to make. Sorry. The kernel for N8000beta5 isn't set through TWRP2.8.3.0 "error bynary". I set through Odin. Everything is great. Good luck!
And you can also use Boeffla-Config app to flash kernel updates now.
Surprised twrp throwing an error, s3 and opo kernels flash fine with twrp. But I only report what others say, I never use twrp. I am a philz touch guy...
Andi
Lord Boeffla said:
And you can also use Boeffla-Config app to flash kernel updates now.
Surprised twrp throwing an error, s3 and opo kernels flash fine with twrp. But I only report what others say, I never use twrp. I am a philz touch guy...
Andi
Click to expand...
Click to collapse
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Guroff1974 said:
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Click to expand...
Click to collapse
But this is unexplainable then... the flash binary has not changed for more than half a year.
However I got to know in the OnePlus One thread, TWRP seems to have introduced some issues lately. But never used TWRP myself, so it is just second hand information I have seen.
Andi
Guroff1974 said:
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Click to expand...
Click to collapse
Ah, but can be something else.
In order to avoid people are flashing wrong kernels, I put asserts in.
Could you please just boot your tablet and look in /system/build.prop file what the entries are there for:
ro.build.product
ro.build.model
ro.build.device
Many thanks
Andi
Ok, for the time being I uploaded the kernels again without the assert checks.
So be careful to not flash the kernel on a different device than the Tab10.2
Please redownload the zip again, it should work now also in TWRP.
Thanks
Andi
Lord Boeffla said:
Ok, for the time being I uploaded the kernels again without the assert checks.
So be careful to not flash the kernel on a different device than the Tab10.2
Please redownload the zip again, it should work now also in TWRP.
Thanks
Andi
Click to expand...
Click to collapse
I redownload N8000beta5 of 31.01.2015. Now everything is good. The kernel is set through TWRP and Philz. Gnabo v8 firmware. Thanks! Good luck!
problem with boeffla kernel v3 beta 6 for samsung note 10.1 (n801x)
Hi ! I am using the samsung kitkat stock rom 4.4.2 rooted in a samsung galaxy note 10.1 (n8010). First time trying a kernel. I have tried to install the boeffla kernel mentioned in the title, both via odin and trwp, but i have the same problem once installed... when rebooting the tablet it just stays in a black display after the "samsung galaxy note 10.1" title. It just does not start, i have to boot in download mode and reinstall the stock rom via odin. Help please! I would like to try this kernel in my tablet ! Thanks!
Q&A for [ROM][4.4.4] CyanogenMod 11 for Acer A510/A511 (with UMTS/3G) [UNOFFICIAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] CyanogenMod 11 for Acer A510/A511 (with UMTS/3G) [UNOFFICIAL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
[A511] check.partition.size=[__PROP_UNDEFINED__]
Hi,
I've tried installing CM11 on my A511. So in fastboot I've installed recovery-cwm-shreps-6.0.5.0-a510-lvm.img (and later, just to try recovery-cwm-shreps-6.0.4.9-a510-lvm.img).
After a reboot and wipe, I have used "apply update from external strorage" on file cm-11-M11-20141018-UNOFFICIAL-a510-a511_lvm.zip (and later, just to see, what happens cm-11-M10-20140920-UNOFFICIAL-a510-a511_lvm.zip).
In every case after "Verifying update package..." the message check.partition.size=[__PROP_UNDEFINED__] is displayed and everything stops.
What am I doing wrong?
AmiH_ said:
Hi,
I've tried installing CM11 on my A511. So in fastboot I've installed recovery-cwm-shreps-6.0.5.0-a510-lvm.img (and later, just to try recovery-cwm-shreps-6.0.4.9-a510-lvm.img).
After a reboot and wipe, I have used "apply update from external strorage" on file cm-11-M11-20141018-UNOFFICIAL-a510-a511_lvm.zip (and later, just to see, what happens cm-11-M10-20140920-UNOFFICIAL-a510-a511_lvm.zip).
In every case after "Verifying update package..." the message check.partition.size=[__PROP_UNDEFINED__] is displayed and everything stops.
What am I doing wrong?
Click to expand...
Click to collapse
Hi,
What's your bootloader version ?
On which recovery and ROM were you before trying this ?
Did you try with TWRP ?
Hi Shreps
Shreps said:
Hi,
What's your bootloader version ?
On which recovery and ROM were you before trying this ?
Did you try with TWRP ?
Click to expand...
Click to collapse
Bootloader is JB-8efc225 and I am running Image Acer_AV051_A511_RV00RC06_EMEA_DE (Android 4.1.2)
Nope, I have not tried TWRP (yet)- all manuals, I have seen said CWM.. do you think, using TWRP will do?
AmiH_ said:
Hi Shreps
Bootloader is JB-8efc225 and I am running Image Acer_AV051_A511_RV00RC06_EMEA_DE (Android 4.1.2)
Nope, I have not tried TWRP (yet)- all manuals, I have seen said CWM.. do you think, using TWRP will do?
Click to expand...
Click to collapse
Both TWRP and CWM are compatible with AOSP ROM (Cyano, AOKP, Paranoid, etc.)
I think we never try a jump from 4.1 stock to 4.4.4
Maybe this is the issue. Try with the latest TWRP first, and if it doesn't work try to flash CWM 6.04.5 and flash CyanogenMod 10.1 or 10.2 (Android 4.2.2 / Android 4.3)
If it's working fine, then upgrade recovery and flash a 4.4.4 ROM
applied EBossa
Hi,
TWRP did the job. Thank you very much
Hello guys
I successfully installed CM 10.2 - with description on Cyanogenmod wiki site with CWM recovery.
(http://wiki.cyanogenmod.org/w/Install_CM_for_xt897) it was few months ago, and now this branch is obsolete
Now i would like to move on CM-11-M12
i tryied to install with new guideline on cyanogen mod but it stops when i am showing the package at cwm - it is saying that package is not for this phone.
So main question - does somebody done something like that ? if so, please give me few main guidelines how to do that, or what i am doing wrong ?
Thanks in Advance
Wojciech
Update your recovery - CWM is not very updated for the PhotonQ.
Use TWRP or OpenRecovery for a more updated recovery.
arrrghhh said:
Update your recovery - CWM is not very updated for the PhotonQ.
Use TWRP or OpenRecovery for a more updated recovery.
Click to expand...
Click to collapse
Thanks for that - it was very helpful.
one more thing that should be noticed and it isn't written on tutorial :
for Photon q you should use moto_msm8960_jbbl because normal will not work, info found on CM blog post
lightning3 said:
Thanks for that - it was very helpful.
one more thing that should be noticed and it isn't written on tutorial :
for Photon q you should use moto_msm8960_jbbl because normal will not work, info found on CM blog post
Click to expand...
Click to collapse
We don't have many tutorials here. I spose you just gotta do a lot of reading before you understand all of the little idiosyncrasies with the device .
after the marshmallow ota the devices running 3.1.3 or 3.1.4 was not able to flash the Twrp recovery after a long wait this twrp recovery image has been released yesterday people who are inned can download from the site below
DOWNLOAD TWRP RECOVERY 3.0.2-1
https://dl.twrp.me/onyx/twrp-3.0.2-1-onyx.img.html
HIT THE THANKS IF I HAD HELPED YOUR PROBLEM :fingers-crossed:
AND PLEASE DONT POST COMMENTS I CAME ACROSS THIS ALREADY ANY FURTHER ISSUES COMMENT BELOW
Damien3187 said:
after the marshmallow ota the devices running 3.1.3 or 3.1.4 was not able to flash the Twrp recovery after a long wait this twrp recovery image has been released yesterday people who are inned can download from the site below
DOWNLOAD TWRP RECOVERY 3.0.2-1
https://dl.twrp.me/onyx/twrp-3.0.2-1-onyx.img.html
HIT THE THANKS IF I HAD HELPED YOUR PROBLEM :fingers-crossed:
AND PLEASE DONT POST COMMENTS I CAME ACROSS THIS ALREADY ANY FURTHER ISSUES COMMENT BELOW
Click to expand...
Click to collapse
Hi Damien,
XDA Assist is here to help newbies find their way around the site as outlined in this sticky so this is not the appropriate place to post this. :good:
Thread closed
Please help me. How to root my nubia X. I try many method but failed.
Model: NX616J
Android Versian: 9
Build number: NX616J_CNCommon_V3.18
Hardware version: NX616J_V1AMB
Do you have unlock your bootloader?
And for me can someone upload twrp recovery because link are all dead. I have one but too big for Flashing though fastboot. If i remember i have to flash one and from it flash the one i have, thx
bretzelpopo said:
Do you have unlock your bootloader?
And for me can someone upload twrp recovery because link are all dead. I have one but too big for Flashing though fastboot. If i remember i have to flash one and from it flash the one i have, thx
Click to expand...
Click to collapse
Ok the one i have is good. I don't know why but my bootloader was relock
Read this article
Nubia X: ROOT, TWRP and GAPPS
Attention: This is a post aimed for Developers only! Check the How-To instead! Welcome to this progress Thread. In this thread im going to collect links, thinks I have done at my own and other stuff related to making the Nubia X more useful...
forum.xda-developers.com