Related
Alright so, I'm trying to flash my QMobile Noir A2, also known as MyPhone A818 also known as MicroMax A45 PUNK. But qMobile is different, same firmware but when i turn off the phone, remove batter, re insert and plug it in. PC Detects the "MT65x PreLoader" And so does the SP Flash tool which I use to flash a custom ROM (Pre-Rooted) to the phone. But then, my phone shows the battery charging logo and PC no longer detects it. Is there anyway I can get around this? I tried EVERY method of rooting so please don't mention that.
Thanks
HOLY ****Z
Also, my phones using MT6575 processor which is better than MicroMax's MT6563 processer, I tried rooting using the MT6563 method and flashing but again as mentioned above. PreLoader won't work
Have you solved it yet?
The Prince1 said:
Have you solved it yet?
Click to expand...
Click to collapse
NO
rayyan777 said:
no
Click to expand...
Click to collapse
help me someone. I tried every method, pc just detects then undetects preloader drivers
rayyan777 said:
help me someone. I tried every method, pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
somebody help dammit this is so annoying why wont anyone help?!
Rayyan777 said:
somebody help dammit this is so annoying why wont anyone help?!
Click to expand...
Click to collapse
If someone knew how, they would help. No need to get angry and swear.
raayan how did u setup sp flashtool to flash rooted img on A2 i have also NOIR A2 but i always get the error cannot pass boot rom through usb error when i flash using sp flash tool how did u get pass that error plz inform me the correct method u use to flash ur a2 it will help us all plz share the method
mega_man said:
raayan how did u setup sp flashtool to flash rooted img on A2 i have also NOIR A2 but i always get the error cannot pass boot rom through usb error when i flash using sp flash tool how did u get pass that error plz inform me the correct method u use to flash ur a2 it will help us all plz share the method
Click to expand...
Click to collapse
megA_man, I get the SAME error now. It just says [BROM] Cannot pass boot rom command through usb. Please tell me if you have a solution!
i tried to install a custom rom but my phone doesnot boot neither it starts in download mode. please suggest what should i do
You could try to flash the stock rom for your phone again. Search Google if there is a stock rom ftf file and flash it with Flashtool
Another possibility is check if you have installed the correct kernel for your custom rom and install both again.
AW: [Q]is my phone soft bricked or hard bricked?
nvnanda said:
i tried to install a custom rom but my phone doesnot boot neither it starts in download mode. please suggest what should i do
Click to expand...
Click to collapse
Could you give details about your installation process? A jig could fix your problem or in other words it could boot your phone in download mode.
If your recovery is available flash a custom ROM with it.
Feuersprotte said:
You could try to flash the stock rom for your phone again. Search Google if there is a stock rom ftf file and flash it with Flashtool
Another possibility is check if you have installed the correct kernel for your custom rom and install both again.
Click to expand...
Click to collapse
how to flash the rom? my mobile doesnot start at all not even in recovery mode
-star- said:
Could you give details about your installation process? A jig could fix your problem or in other words it could boot your phone in download mode.
If your recovery is available flash a custom ROM with it.
Click to expand...
Click to collapse
i installed the rom under normal conditions. for your info i have done this plenty of times but this time i m clueless. i have ordered for a jig but is there any other way to get my phone back?? please suggest.
Have you tried to flash it with 'Flashtool'?
Have you installed the correct Kernel for your custom rom?
Another solution might be to look in the internet for 'wotan server' - here you could try to restore your phone but it will cost a little.
u could also try odin to flash your original formware
Other than the jig is there any way to start the mobile in download mode??
You could try going into flash mode then flash a new kernal or by going into fastboot mode to flash a new custom ROM in Flashtool.
But I think this only works with Xperia Phones.
Feuersprotte said:
Have you tried to flash it with 'Flashtool'?
Have you installed the correct Kernel for your custom rom?
Another solution might be to look in the internet for 'wotan server' - here you could try to restore your phone but it will cost a little.
Click to expand...
Click to collapse
but the server is for sony xperia phones
Sadra.. said:
You could try going into flash mode then flash a new kernal or by going into fastboot mode to flash a new custom ROM in Flashtool.
But I think this only works with Xperia Phones.
Click to expand...
Click to collapse
workd in nexus one too
sorry, didn't have that in mind but you didn't tell us yet what phone you have and if you have used 'Flashtool' or 'Odin Flash tool' which is for Samsung phones, so it is very difficult for us to help you
Feuersprotte said:
sorry, didn't have that in mind but you didn't tell us yet what phone you have and if you have used 'Flashtool' or 'Odin Flash tool' which is for Samsung phones, so it is very difficult for us to help you
Click to expand...
Click to collapse
i have samsung galaxy ace. please tell me how to use any of the tools because my phone is not starting in download mode.
I have problems with my Smartphone stock rom since i rooted and i deleted some system apps , i didn't installed cmw recovery just have stock recovery, the brand sent me the firmware via gmail and i downloaded it, i don't know how to install it its a zip file that contains : boot.img, cache.img, system.img and more, well i don't know what to do to install this to restore the phone rom PLEASE HELP ME!
mostevil94 said:
I have problems with my Smartphone stock rom since i rooted and i deleted some system apps , i didn't installed cmw recovery just have stock recovery, the brand sent me the firmware via gmail and i downloaded it, i don't know how to install it its a zip file that contains : boot.img, cache.img, system.img and more, well i don't know what to do to install this to restore the phone rom PLEASE HELP ME!
Click to expand...
Click to collapse
What is your phone?
just download your stock firmware and flash it with cwm. cmiiw :good:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
sent from Galaxy Young GT-S6310
ZonaRMR said:
What is your phone?
Click to expand...
Click to collapse
Hi thanks for reply, my hone is a new brand called Szenio from spain, a mediatek mt6582m processor phone called Szenio Syreni 50QHD, i can't find CMW recovery for this phone cause its not popular its new, they just sent me the firmware zip , with 378mb, i have windows 8 if there is any way to install this zip to my phone with any program.
bdkbdkbdk said:
just download your stock firmware and flash it with cwm. cmiiw :good:
I can't find a version of cmw recovery for my phone cause is recent, unpopular new brand Szenio, model Syreni 50QHD
They sent me just the zip with the rom but i don't know what to bo, if i had cmw but i can't find a version for my phone.
Click to expand...
Click to collapse
mostevil94 said:
Hi thanks for reply, my hone is a new brand called Szenio from spain, a mediatek mt6582m processor phone called Szenio Syreni 50QHD, i can't find CMW recovery for this phone cause its not popular its new, they just sent me the firmware zip , with 378mb, i have windows 8 if there is any way to install this zip to my phone with any program.
Click to expand...
Click to collapse
This will help you, visit this link http://forum.xda-developers.com/showthread.php?t=1982587 : Bueno:
you should restore the backup u had made before flashing anything:good:
new_at_this(jatin) said:
you should restore the backup u had made before flashing anything:good:
Click to expand...
Click to collapse
I didn't had anything to do, with stock recovery i can't do anything just factory reset, i just rooted phone with Framaroot and i deleted some system apps with a app form play store, i got a force close error when i go to display settings.
ZonaRMR said:
This will help you, visit this link http://forum.xda-developers.com/showthread.php?t=1982587 : Bueno:
Click to expand...
Click to collapse
I downloaded latest version of SP Flash tool , mtk usb drivers for windows 8, when iopen flash tool and i select scatter file i press download , after i connect smartphone in the bottom right - Mediatek preloader USB VCOM port (COM3) and get stuck at 0% of process, don't show any progress bar with red just 0%, other version of SD Flash tool i get erorr after red progress : error 8200, i don't know what to do, what is the problem.
mostevil94 said:
I downloaded latest version of SP Flash tool , mtk usb drivers for windows 8, when iopen flash tool and i select scatter file i press download , after i connect smartphone in the bottom right - Mediatek preloader USB VCOM port (COM3) and get stuck at 0% of process, don't show any progress bar with red just 0%, other version of SD Flash tool i get erorr after red progress : error 8200, i don't know what to do, what is the problem.
Click to expand...
Click to collapse
You must load the correct scatter file (in your case mt6582), turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
Thankx Buddy Its Work
Thanks
Thanks it worked. And Odin is also the best way to go.
ZonaRMR said:
You must load the correct scatter file (in your case mt6582), turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
Click to expand...
Click to collapse
I put the scatter from my firmware, its name is MT6589_Android_scatter_emmc, i don't know hwy is mt6589 since my phone has mt6582 or mt6582m, by the way, can you help me to get scatter for mt6582? thank you very much for help.
mostevil94 said:
I put the scatter from my firmware, its name is MT6589_Android_scatter_emmc, i don't know hwy is mt6589 since my phone has mt6582 or mt6582m, by the way, can you help me to get scatter for mt6582? thank you very much for help.
Click to expand...
Click to collapse
I'm confused, I searched specifications of your phone and says I have a mt6582m processor and on the other hand said to have a mt6589!
which specification is correct?
ZonaRMR said:
I'm confused, I searched specifications of your phone and says I have a mt6582m processor and on the other hand said to have a mt6589!
which specification is correct?
Click to expand...
Click to collapse
I send you link with original specs.
Hi,
please, can help me to find stock ROM with scatter file for Syreni-50 qhd my device not booting
thanks
Need Help LAVA iris 504q+
Please provide the stock rom for lava iris 504q plus
i have bricked my phone and need it urgently
Stock rom
downloadwww31.adrive.com/public/view/Rpt2ww.html
Link doesnt work
Please provide another link
will that work?
shubham56 said:
Link doesnt work
Please provide another link
Click to expand...
Click to collapse
is the stock recovery working dude??
sophisticatedjoker said:
is the stock recovery working dude??
Click to expand...
Click to collapse
nah dude
bt i got cwm somehow working
plz post d rom i need it urgently
cwm
shubham56 said:
plz post d rom i need it urgently
Click to expand...
Click to collapse
post ur cwm package here ..i'll extract the rom from my device and give that to you
but u may need to remove the bootloader
u can install cwm via mtk droid tools...its easy
follow these steps
Things to necessary---
*Mtk droid tool
*Rooted phone
*usb driver must be installed
*enable usb debbuging
STEPS:-
* Connect your switched on rooted mtk device to your computer and open MTKDroid tool, the tool will recognise your device and connect to it, if the colour indicator in the bottom left corner is green, you already have root shell,and can go on to the next step, if it is yellow, click on the root button at the bottom, and wait for the progress. When the indicator turns to green you have root shell which is necessary for this operation.
* Next click on the tab 'root,backup,recovery' and select 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes.
* The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes.
*finally cwm has been installed.
shubham56 said:
u can install cwm via mtk droid tools...its easy
follow these steps
Things to necessary---
*Mtk droid tool
*Rooted phone
*usb driver must be installed
*enable usb debbuging
STEPS:-
* Connect your switched on rooted mtk device to your computer and open MTKDroid tool, the tool will recognise your device and connect to it, if the colour indicator in the bottom left corner is green, you already have root shell,and can go on to the next step, if it is yellow, click on the root button at the bottom, and wait for the progress. When the indicator turns to green you have root shell which is necessary for this operation.
* Next click on the tab 'root,backup,recovery' and select 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes.
* The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes.
*finally cwm has been installed.
Click to expand...
Click to collapse
Hoe to root the phone in kitkat 4.4.2???
i tried framaroot,towelroot and kongo via PC
in framaroot it shows error 9
terrors94 said:
Hoe to root the phone in kitkat 4.4.2???
i tried framaroot,towelroot and kongo via PC
in framaroot it shows error 9
Click to expand...
Click to collapse
Check this out VROOT for PC
Download- http://www.mediafire.com/download/v3e3mtgxp1khlar/VRoot_1.6.0.3690_Setup.exe
root any phone in three steps
1>download ,install and open V Root
2>enable usb debugging and connect your phone
3>after it recognizes 504q+ click on root,it will reboot ur phone 3-4 times and when you see a 'TICK' sign
surprise surprise u have rooted ur phone
I m attaching my cwm package too
hope dis helps...
N dont forget to hit thanks if dis helps
Shubham is your phone rooted and is cwm installed pls help me too i also have 504q+
srb007 said:
Shubham is your phone rooted and is cwm installed pls help me too i also have 504q+
Click to expand...
Click to collapse
i have given the root guide on prev page
for cwm
download the cwm package
extract it and rename both files to recovery(retain the extensions)
copy to your sd card
download mobile uncle mtk tools
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
choose the recovery option
and select the copied recovery and press yes
done
kitkat update.zip require
shubham56 said:
i have given the root guide on prev page
for cwm
download the cwm package
extract it and rename both files to recovery(retain the extensions)
copy to your sd card
download mobile uncle mtk tools
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
choose the recovery option
and select the copied recovery and press yes
done
Click to expand...
Click to collapse
Shubham Can you provide me kitkat update.zip ??? i hav rooted and CWM installed ..........
Hi guys, I have rooted my 504q+ and installed carliv touch recovery, now I can't get kitkat update, please upload stock recovery img and kitkat update.
Thanks in advance.
Asking for password to download
nitish103 said:
downloadwww31.adrive.com/public/view/Rpt2ww.html
Click to expand...
Click to collapse
Hi dude,,, i am trying to flash this stock rom.... when i try to download it, its asking for password... please provide.....
shubham56 said:
Check this out VROOT for PC
Download- http://www.mediafire.com/download/v3e3mtgxp1khlar/VRoot_1.6.0.3690_Setup.exe
root any phone in three steps
1>download ,install and open V Root
2>enable usb debugging and connect your phone
3>after it recognizes 504q+ click on root,it will reboot ur phone 3-4 times and when you see a 'TICK' sign
surprise surprise u have rooted ur phone
I m attaching my cwm package too
hope dis helps...
N dont forget to hit thanks if dis helps
Click to expand...
Click to collapse
above setup file is in chiness.......do you have English version......Don't know how to root since can't understand language
Root by update-Su2.0.zip through cwm
Sent from my 504Q+ using Tapatalk
Any Developer Please Help us...
nitish103 said:
Root by update-Su2.0.zip through cwm
Sent from my 504Q+ using Tapatalk
Click to expand...
Click to collapse
How to root with this.... please provide steps or helpful link...
Any Developer please help us to ROOT Lava Iris 504Q+ after upgrading to KitKat 4.4.2
Please.....
need sctter file for iris504q+
Softbricked my phone as I was updating to 4.4.2 (>.<)
Can anyone plz give me scatter file so that I can flash cwm and restore my cwm backup
Any other help will be really great.
As I start my phone it just boots to stock recovery.
Just want to boot in cwm instead plz help.
This is How to Unbrick Lava Iris 504Q+
theprozaic said:
Softbricked my phone as I was updating to 4.4.2 (>.<)
Can anyone plz give me scatter file so that I can flash cwm and restore my cwm backup
Any other help will be really great.
As I start my phone it just boots to stock recovery.
Just want to boot in cwm instead plz help.
Click to expand...
Click to collapse
Bro.... download the STOCK ROM of 4.2.2 from here...
http://androidxda.com/download-lava-stock-rom-firmware
and follow the instructions given there to flash it manually...... Done.... your phone is back with all out of the box features.......
Give me a THANKS if i Helped....... :good:
Hello
i have an android mobile,which i had rooted and then accidently deleted Package Installer and then i hard reset my mobile.
I cannot install any app also USB computer connectivity not working only can be used for charging.
Please help with this problem.
saqib ullah said:
Hello
i have an android mobile,which i had rooted and then accidently deleted Package Installer and then i hard reset my mobile.
I cannot install any app also USB computer connectivity not working only can be used for charging.
Please help with this problem.
Click to expand...
Click to collapse
What app do you use to uninstall the package installer?
What is your devices?
Need more info..
Moblie app
Thunderoar said:
What app do you use to uninstall the package installer?
What is your devices?
Need more info..
Click to expand...
Click to collapse
I think that was titan backup or super user.
app used for uninstalling package installer
that was i forgot but my mobile is android 4.2.2 with no update option from settings
saqib ullah said:
that was i forgot but my mobile is android 4.2.2 with no update option from settings
Click to expand...
Click to collapse
Do you have any custom recovery? Also which mobile do you have?
custom recovery
aviralrstg said:
Do you have any custom recovery? Also which mobile do you have?
Click to expand...
Click to collapse
No unfortunately i don't have any custom recovery
saqib ullah said:
No unfortunately i don't have any custom recovery
Click to expand...
Click to collapse
Do you have any app installed like Rashr or flashify or flashfire which can be used to flash recovery? Also tell us your mobile like samsung /lg etc. not just android version. You will find this info in Settings>>About.
aviralrstg said:
Do you have any app installed like Rashr or flashify or flashfire which can be used to flash recovery? Also tell us your mobile like samsung /lg etc. not just android version. You will find this info in Settings>>About.
Click to expand...
Click to collapse
No it is hard reseted.No recovery apps
Model Number QMobile A75
Android Version 3.4.5
Software Version A75_MP_140113
also i have it's stock rom(file.rar) on my computer.
Thanks for reply.Kindly help me with s solution
saqib ullah said:
No it is hard reseted.No recovery apps
Model Number QMobile A75
Android Version 3.4.5
Software Version A75_MP_140113
also i have it's stock rom(file.rar) on my computer.
Thanks for reply.Kindly help me with s solution
Click to expand...
Click to collapse
First confirm me is this your device? http://m.gsmarena.com/qmobile_noir_a75-7387.php
If it is your phone, just flash the stock ROM file using SP Flash Tools.Check here for detailed instructions with images on how to use SP Flash Tools:
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
If you successfully flash the stock ROM, your problem would be fixed. But be careful using the software, don't click anywhere if you don't know what it will do.
Make sure the file you have is not corrupted.
If you need to re-download stock ROM file: https://firmwarefile.com/qmobile-a75
Hit thanks if it helped!
aviralrstg said:
First confirm me is this your device? http://m.gsmarena.com/qmobile_noir_a75-7387.php
If it is your phone, just flash the stock ROM file using SP Flash Tools.Check here for detailed instructions with images on how to use SP Flash Tools:
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
If you successfully flash the stock ROM, your problem would be fixed. But be careful using the software, don't click anywhere if you don't know what it will do.
Make sure the file you have is not corrupted.
If you need to re-download stock ROM file: https://firmwarefile.com/qmobile-a75
Hit thanks if it helped!
Click to expand...
Click to collapse
yes this is my mobile i already have its stock rom but by mobile's charging port only can be used for charging,not connecting to computer.is there any other way to flash rom to it or sideload that package installer.
saqib ullah said:
yes this is my mobile i already have its stock rom but by mobile's charging port only can be used for charging,not connecting to computer.is there any other way to flash rom to it or sideload that package installer.
Click to expand...
Click to collapse
Your mobile's port is ok, you will need to install drivers on your computer for it to be able to detect your mobile for flashing the ROM. Unless there is a custom ROM for your device, there us no other way.
Hit thanks if it helped!
I've tried this too but my mobile not connecting through usb my problem is to find a way to install or side load package installer
Sounds like you're rooted... try extracting the package manager apk from a stock zip just placing the files back as they were in your file explorer. You'll have to reboot of course
MelloZ said:
Sounds like you're rooted... try extracting the package manager apk from a stock zip just placing the files back as they were in your file explorer. You'll have to reboot of course
Click to expand...
Click to collapse
Yes it was but now it's unrooted due to hard reseted by mistake.Is there any other solution without using usb mobile port as it is damaged means can only be used for charging .
if(you helped me)
{
Thanks
}
else
Try to help me please
saqib ullah said:
Yes it was but now it's unrooted due to hard reseted by mistake.Is there any other solution without using usb mobile port as it is damaged means can only be used for charging .
if(you helped me)
{
Thanks
}
else
Try to help me please
Click to expand...
Click to collapse
There is a thanks button at every post which increases thanks count of a person on how XDA profile. If you feel a post helped you, you should just hit the button under his post.
The method I told you (to flash stock rom using SP flash tools) can fix even hard bricked phones(when the phone dies,the screen doesn't even turn on). I don't know of any other way to help you since:
1. You don't have a custom recovery.
2. You are not rooted.
3. You can't install any app to root/install custom recovery.
4. You deny to do the only thing that can fix your phone.
Phone USB ports are not damaged easily otherwise you won't be able to even charge.
1. Change your USB cable.
2. Try using another computer(you need a windows PC)
3. Download and install appropriate drivers to your computer.
When I get free time, I will post some links for drivers you can try. If you're not willing to do it, ask a friend to help you or you are on your own, I won't help anymore.