[Update][ English version ] ALL- NOTE4 CWM Based Recovery - Galaxy Note 4 Android Development (Exynos)

Thank you for my follow up
Continuously updated for you ...........
Please prove your presence a word of thanks to objectively no more .....
English version N910c CWM Recovery 6.0.5.1
English version N910u CWM Recovery 6.0.5.1
English version N910f-CWM Recovery-6.0.5.1
English version N9108v-CWM Recovery-6.0.5.1
English version N9106w-CWM Recovery-6.0.5.1
English version N910g-cwm-recovery-6.0.5.1
English version N910s-CWM Recovery-6.0.5.1
English version N910l-CWM Recovery-6.0.5.1
English version N910k-CWM Recovery-6.0.5.1
English version N910h-CWM Recovery-6.0.5.1
English version N915f-CWM Recovery-6.0.5.1
English version N915g-cwm-recovery-6.0.5.1
English version N915p-CWM Recovery-6.0.5.1
English version N915s-CWM Recovery-6.0.5.1
English version N915t-CWM Recovery-6.0.5.1
English version N9150-CWM Recovery-6.0.5.1
Thank you--- xiaolu​
Thank you​[/CENTER]

This might work on K version?

I also need k, please add.
--
白い熊

Op did you personaly test it on N 910 C? As untested cwm recovary can brick your phone in back up and restore stage. This was happened with me in my Note 3 at initial stage. So be carefull???

have flashed 910S. no brick, but so far no use - menu is in chinese.
OP, I have a feeling this is somebody else's work, is it not?

Is there any installation instruction?? Or I juz flash it via Odin?? Show steps please...

I saw this in other forum (chineese)
I saw this in a CHINEESE forum, but I couldn't translate it all, is there a way someone can bring the CWM Recovery in English? (I can read it at least )
Thanks for the sharing, but if that could be in english.

For anyone who doesn't know how to flash this, I just used flashify. It's free and easy. Extract the recovery.img and flash that file. I can also confirm it's a working recovery on my 910U. It is all in Chinese though, so it doesn't do me a whole lot of good.

Works very well on my N910U.
BTW, these are made by @xiao1u .

GSeeker said:
Works very well on my N910U.
BTW, these are made by @xiao1u .
Click to expand...
Click to collapse
would you care to translate some basic items, needed to do a classic flash?
thanks in advance.

Aziraphale_l said:
would you care to translate some basic items, needed to do a classic flash?
thanks in advance.
Click to expand...
Click to collapse
Just flash it like a normal ROM in Odin, choose file as a PDA part.

GSeeker said:
Just flash it like a normal ROM in Odin, choose file as a PDA part.
Click to expand...
Click to collapse
yes, thanks, already figured as much.
however, the ultimate goal is to flash unbranded n910c rom onto my skt n910s.
i might be missing something, but i am so far unable to do this neither with cwm, nor with odin.
odin fails at sboot.bin write in NAND and cwm complains about invalid signature, but simply interrupts if the signature check is disabled.
would someone comment / advise, PLEASE?

English CWM Recovery for n910C!
English version of CWM Recovery for n910c from 22.10.2014 below.
Newest versions from author xiao1u you can take here.
Enjoy guys!

Winstrol said:
English version of CWM Recovery for n910c below.
Enjoy guys!
Click to expand...
Click to collapse
THANKS!
does NOT work on S however.
i know it was a longshot, but for those wondering...
it did claim to be backwards compatible on chinese forum, i.e. they claimed the S was working on C, so it was worth a try.
waiting for the next one, then *sigh*

Winstrol said:
English version of CWM Recovery for n910c below.
Enjoy guys!
Click to expand...
Click to collapse
Great! My N910C is comming inhand in few days. Can't wait to root and flash recovery for it.
Many thanks @Chenglu and all of you.

N910U
Thanks guys for working on english versions
Would it be possible to get the N910u too?
Thank you I'll be waiting.
Cheers!

I flashed the CWM recvovery successfully but could not ever do a backup successfully on this CWM either on internal sd or external sd. My phone is N910U from HKG.
---------- Post added at 10:19 AM ---------- Previous post was at 09:28 AM ----------
Just found CWM for N910U in English. All creadits to the developer and the English translator. I am just uploading the attachment.
https://www.sendspace.com/file/8qmeo6

h_h111 said:
I flashed the CWM recvovery successfully but could not ever do a backup successfully on this CWM either on internal sd or external sd. My phone is N910U from HKG.
---------- Post added at 10:19 AM ---------- Previous post was at 09:28 AM ----------
Just found CWM for N910U in English. All creadits to the developer and the English translator. I am just uploading the attachment.
https://www.sendspace.com/file/8qmeo6
Click to expand...
Click to collapse
Have you tested it? If so Is it working? I have a 910U, looking to flash that custom rom. But want to back up first just incase.

Greetings all,
would it work for F models ?
Thanks

Hendrickson said:
Have you tested it? If so Is it working? I have a 910U, looking to flash that custom rom. But want to back up first just incase.
Click to expand...
Click to collapse
Yes I did. But the backup cannot complete once ever.

Related

[Q] b92m Jelly Bean ?

Hello, I'm newer.
I have searching for b92m and I found only root guide ...
Is possible to install Jelly bean to this device ?
There is anyone that have this phone ?
I'm not sure if the section to post is ok. ,but haven't found nothing to Star b92m...
Thank you.
b92m
spotty130 said:
Hello, I'm newer.
I have searching for b92m and I found only root guide ...
Is possible to install Jelly bean to this device ?
There is anyone that have this phone ?
I'm not sure if the section to post is ok. ,but haven't found nothing to Star b92m...
Thank you.
Click to expand...
Click to collapse
No JB rom yet but might be on the way.. check out this thread
http://forum.xda-developers.com/showthread.php?t=1952991
tallguy07 said:
No JB rom yet but might be on the way.. check out this thread
http://forum.xda-developers.com/showthread.php?t=1952991
Click to expand...
Click to collapse
O.k. Thank you.
I discovered that Google has released the source of Jelly Bean.
I hope that the guys at xda will soon give us great new ROM!
Especially for this model.
Thank you!
:laugh:
spotty130 said:
O.k. Thank you.
I discovered that Google has released the source of Jelly Bean.
I hope that the guys at xda will soon give us great new ROM!
Especially for this model.
Thank you!
:laugh:
Click to expand...
Click to collapse
same here...
cause the phone is not bad.. got the 1gb version and i love it^^
JB 4.1.2
antutu screen (NOT FROM ME)
click here
b92m411.zip (includes: drivers, flashtool, rom, and spanish/italian guide idk), posted from "croderco" and "mantarey" on androidiani forum
SeparateArchive.zip (english guide and working root/busybox AND CWM ; THX to giubari)
android_xcuj28 said:
JB 4.1.2
antutu screen (NOT FROM ME)
click here
b92m411.zip (includes: drivers, flashtool, rom, and spanish/italian guide idk), posted from "croderco" and "mantarey" on androidiani forum
SeparateArchive.zip (english guide and working root/busybox AND CWM ; THX to giubari)
Click to expand...
Click to collapse
I want to try this rom, but the hostsite is down
Do you know if there is a mirror ?
dweebdogg said:
I want to try this rom, but the hostsite is down
Do you know if there is a mirror ?
Click to expand...
Click to collapse
mhh for me all links still works
someone uploaded it here
link from chinamobiles.org forum
www.n2k1.com/daki1978/b92m411.zip
someone already tries this rom??
timtim0103 said:
someone already tries this rom??
Click to expand...
Click to collapse
Rom is working fine without any problems
Is there a english manual to flash this JB rom?
Perfect rom, i installed today
Only one thing, there's chinese crap in this rom
timtim0103 said:
Only one thing, there's chinese crap in this rom
Click to expand...
Click to collapse
root ur phone
then install this here
https://play.google.com/store/apps/details?id=com.rootuninstaller.free&hl=de
pick the chinese app.. and uninstall it...
dont forget to make a backup from the app... (its not rly needed but ye^^)
The rooting is the problem for me.
Can someone explain to me in simple english how to root after JB rom install.
Nobody??
Hi All,
Unless you haven't seen it Azkorri on movilesdualsim forum has a JB custom ROM. I haven't tried it yet but from what I hear it looks good. Link below:
http://www.movilesdualsim.com/foro/threads/20545-ModRom-2-0-2-AZK-B92M-JB-4-1-2
I removed the craps and repacked
I got the craps removed and repacked back with a little bit more.
Here is the link: http://forum.xda-developers.com/showthread.php?t=2100899
Hi
it this version JB contains the Polish language?
if not, where can I find the version of the Polish language for my B92M?
Odp: [Q] b92m Jelly Bean ?
Daniel_IL said:
it this version JB contains the Polish language?
if not, where can I find the version of the Polish language for my B92M?
Click to expand...
Click to collapse
Try software called "custom locale" you can find it on Google shop.
This will allow you to have polish language in 80%. For same reason setting will remain in English

[Q] Custom CWM and root for ZTE V967S

Hi. I´m new in this forum...and need help.
Somebody can tell me if there are some custom CWM to this phone? and how to root it?
I have searched in the forum but i didn´t find anything. Bruno talk about make a custom CWM for it in his V987 thread but there is no.
Thx.
gargamelxda said:
Hi. I´m new in this forum...and need help.
Somebody can tell me if there are some custom CWM to this phone? and how to root it?
I have searched in the forum but i didn´t find anything. Bruno talk about make a custom CWM for it in his V987 thread but there is no.
Thx.
Click to expand...
Click to collapse
Check here.
http://forum.xda-developers.com/showthread.php?t=2300622
suoko said:
Check here.
http://forum.xda-developers.com/showthread.php?t=2300622
Click to expand...
Click to collapse
Ok suoko Thx.
I will subscribe to your threat waiting for some english CWM, while i will try with the chinesse one. Thanks.
suoko said:
Check here.
http://forum.xda-developers.com/showthread.php?t=2300622
Click to expand...
Click to collapse
Sorry suoko for quote you other time. I´m new in this forum and cant post in your V967S thread. To install the new firmware that solve the touchscreen problem, what is the method? Must I install new CWM or can I install it with the stock CWM simply with "install zip from sdcard"? Stock CWM support backup?
Thx for your support.
Search youtube and you will surely get some videos with step by step information about installing custom rom.
Sent from my LG-E400 using xda premium
Thx for your answer. But this ROM isn´t a custom ROM. It´s a official ROM and i dont know if stock CWM is totally functional to install it.
gargamelxda said:
Thx for your answer. But this ROM isn´t a custom ROM. It´s a official ROM and i dont know if stock CWM is totally functional to install it.
Click to expand...
Click to collapse
I used the default recovery to install the new ZTE build. By "default recovery" I mean the recovery that etotalk put on it. I have no idea if it's the original one or a modded one. Since the phone is chinese the original recovery could have been in chinese language like the cwm one.
I'll try using the http://builder.clockworkmod.com now.
It might accept the chinese cwm one and spit out an english one
The recovery from etotalk can be installed via "etotalk tools".
If you need both of them just ask.
http://www.youtube.com/watch?v=T2cf3mAPOD0
U need UncleTools then update recovery with .img file (it other threqd someone posted it)
This way u got chineese CWM but is easy to find update rom from SD
If u need LeWA rom 4.2.1 tell me
U can see this rom on this video and other my videos show camera sample videos
http://www.youtube.com/watch?v=T2cf3mAPOD0
Regards
BoNt3k and suoko, thx for your answer and help. In a few days I will have the V967S and i want to be ready for root, custom CWM... Now i think that i will can do it.
Thx very much!!
Hey suoko, here is a new ROM to our phone. Have you try it? http://www.needrom.com/mobile/zte-v967s-2/
Hi suoko,
Can you send or post the CWM english recovery.img file ( For mobileUncle tools )
Thanks a lot.
Regards
Geheimke
geheimke said:
Hi suoko,
Can you send or post the CWM english recovery.img file ( For mobileUncle tools )
Thanks a lot.
Regards
Geheimke
Click to expand...
Click to collapse
I think that you may post here http://forum.xda-developers.com/showthread.php?t=2300622&page=2 that is the thread of suoko. Here is possible that he does not read this
gargamelxda said:
Hey suoko, here is a new ROM to our phone. Have you try it? http://www.needrom.com/mobile/zte-v967s-2/
Click to expand...
Click to collapse
No, I'm not going to test experimental roms with this phone cause I'm not going to risk hw failures this time.
The only thing I'd do is remap partitions to have one single internal one but I can happily live with current partitioning.
I'll wait for an official update from zte this time, they look pretty active, like zopmobile devs.
Regarding the english cwm, no, I don't have one.
Sent from my ZTE V967S using Tapatalk 4 Beta
Google Apps
How to install Google Apps without change original room? It's really necessary install CWM?
CWM recovery for V967S v 6.x
Dear Owners, here is a CWM recovery for the ZTE V967S
This contains the correct model name "P188F07".
MD5 sum: fc14578682f3ece49c2211f09d83a090
English
cappa72 said:
Dear Owners, here is a CWM recovery for the ZTE V967S
This contains the correct model name "P188F07".
MD5 sum: fc14578682f3ece49c2211f09d83a090
Click to expand...
Click to collapse
It's in English?
flahvioo said:
It's in English?
Click to expand...
Click to collapse
Yes, it is.
cappa72 said:
Yes, it is.
Click to expand...
Click to collapse
What is the best store to buy the device? And what online store you bought?
I bought mine from etotalk, there are no earphones included but the service is ok
ZTE V967s_need for boot.img
Hello,
I made a mistake using SP flash tool and changed boot.img ... now I can boot only into recovery ... any update I tried from recovery CWM6.0.1.2 seems to install but ends in a boot logo screen and so remains for long long time
I think I need the original boot.img ... can anyone help me?
Regards,
Adrian

[ROM] Rooted Stock 5.1.1 Deodexed Rom for G9250 [BOGB]

This is just a deodexed/zipaligned/optimized stock rom. Nothing added and nothing removed. Made this rom because of Xposed. Is just my hobby project.
CSC is based on TGY. Kernel is based on your stock because it doesnt flash kernel. If you need to keep your default CSC , backup your default CSC and replace it after flashing this rom and set permission.
Before flashing this rom , make sure you are rooted with TWRP. Make sure you are running on stock 5.1.1 modem and kernel of your G9250 stock rom. Make sure you do a full backup from TWRP along with your EFS.
This build is based on HK version S6 Edge and tested on HK version of S6 Edge.
Everything is working fine on my device with this rom
Private mode is working
Xposed is working
Fingerprint is working
Camera is working
Wifi is working
Call is working
Not Working
There is some problem with GDrive. To fix this , disable GDrive and update to the latest Gdrive from Play Store. If you are not using it , just remove it with Titanium.
Wechat
If something is not working on your device , please restore from your backup and forget this rom because I will not use every single app that came with stock and I dont have much time to spend on troubleshooting what is not working. So , flash at your own risk.
If your device is soft/hard bricked , knox tripped , damage , explode , warranty void after flashing this rom , i take no responsibility on this.
How to install
Final reminder , Full nand backup ( boot, efs, radio, system, everything) before flashing this. Youll have to be on stock 5.1.1 kernel and modem. I dont guarantee it work on your device. Flashing this rom will wipe your system. I suggest you backup your data in your internal too. Some times sheetz happened.
1. Download the rom here (Gdrive) or here (Dev St)
2. Copy the rom to your internal memory.
3. Reboot to TWRP recovery
4. Install
5. Reboot , enjoy!
First boot up will take 5-10mins. So sit back and enjoy.
Thanks to installer script creator , chainfire for the root , svadev for the deodexer , golubev for privatemode fix and to those ive missed out , thank you.
Reserved
Cool a new rom thanks
Hi, I've tried it with my S6 Edge sm-g925F, but I cant get the network to work, I got baseband version "unknown". I hope that you can create another rom for 925f.
Thanks
can u think in a future update fof BOH2 update?
Enviado desde mi SM-G9250 usando Tapatalk 2
KM7 said:
Hi, I've tried it with my S6 Edge sm-g925F, but I cant get the network to work, I got baseband version "unknown". I hope that you can create another rom for 925f.
Thanks
Click to expand...
Click to collapse
it wont work on 925f kernel ... this is for 9250 only..
estanenmi said:
can u think in a future update fof BOH2 update?
Enviado desde mi SM-G9250 usando Tapatalk 2
Click to expand...
Click to collapse
i will try if i have time for it because it really needs lots of time to test ....
I love your work. will this ROM update in the future?
I cant answer you this. Even if i might provide updated rom , it will just be a rom from TGY build... so the latest rom for TGY currently is BOGB.
Hi, i am using a nice ROM from gfan bbs ,but I don't know if it is deodexed, could you please teach me how to recognize if it is deodexed?
Hi, thanks for your rom, but would u please advise which version of xposed u are using? I tried to install it, but get boot loop, many thanks.
Luck ying said:
Hi, i am using a nice ROM from gfan bbs ,but I don't know if it is deodexed, could you please teach me how to recognize if it is deodexed?
Click to expand...
Click to collapse
go to /system/app and see if you have any .odex files in it..
joechan said:
Hi, thanks for your rom, but would u please advise which version of xposed u are using? I tried to install it, but get boot loop, many thanks.
Click to expand...
Click to collapse
using this xposed-v71-b2-sdk22-tw-arm64-custom-build-by-wanam-20150817.zip along with XposedInstaller_3.0_alpha4.apk try here http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
prodigiez said:
using this xposed-v71-b2-sdk22-tw-arm64-custom-build-by-wanam-20150817.zip along with XposedInstaller_3.0_alpha4.apk try here http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Click to expand...
Click to collapse
Many many thanks [emoji106]
Hey Sir, Can you help me make an one ROM is TW version deodexed OH2?
PLz
Hi,
Can someone help me with deodexing OH2 for G925F? Or any link with the tutorial? I used SVADeodexerForArt but I don't know how to push the new files.
Thanks
pister said:
Hi,
Can someone help me with deodexing OH2 for G925F? Or any link with the tutorial? I used SVADeodexerForArt but I don't know how to push the new files.
Thanks
Click to expand...
Click to collapse
best is do a Rom.zip with it..and delete the google apps replace it with downloaded versions..most will give fc after deodex..normal
Hey brother,
Can you help me make an one ROM is Hong Kong version deodexed OH2?
PLz.
Alex-V said:
best is do a Rom.zip with it..and delete the google apps replace it with downloaded versions..most will give fc after deodex..normal
Click to expand...
Click to collapse
How can I make .zip rom?
Thanks
can u tell me how to root and have TWRP on 5.1.1 and keep fingerprint ???

G930 Qualcomm Multilanguage

Has anybody this file to share with me?
https://www.youtube.com/watch?v=27sOx89ypLc
Thanks
fernandesx said:
Has anybody this file to share with me?
https://www.youtube.com/watch?v=27sOx89ypLc
Thanks
Click to expand...
Click to collapse
you need to be more descrrptive with your thread title
and please post ?s in the q and a threads as this is the rom section
---------- Post added at 01:24 PM ---------- Previous post was at 01:24 PM ----------
mods please move this thread to the appropriate thread
You can install last G930UUEU4APL2 on your device, root it by using psouza4's method.
Then you download the chinese version from samsung-updates for the G9300.
Using winrar extract from the AP the system.img.ext4 and copy it to your phone.
With flashfire just flash the firmware/ota and add a new item wipe, and you will be on this version with more languages.
But for me it only has portuguese pt-PT and i need pt-BR
Hope this helps
G930T
PadsPCB said:
You can install last G930UUEU4APL2 on your device, root it by using psouza4's method.
Then you download the chinese version from samsung-updates for the G9300.
Using winrar extract from the AP the system.img.ext4 and copy it to your phone.
With flashfire just flash the firmware/ota and add a new item wipe, and you will be on this version with more languages.
But for me it only has portuguese pt-PT and i need pt-BR
Hope this helps
[/QUO
i have one G930T with no Netherlands how can i put in it
Click to expand...
Click to collapse

Neffos X1 max

Can you open the title for x1 max?
Do you have root rom special apk for x1 max?
Thanks
feblood said:
Can you open the title for x1 max?
Do you have root rom special apk for x1 max?
Thanks
Click to expand...
Click to collapse
https://morfitronik.pl/root-w-smartfonach-neffos-od-tp-link-x1-c5-c5-max-y5-y5l/
The link to morfitronik.pl is not working anymore. Are there other Informations about rooting x1 max?
Thanks, Alex
Found a solution for Neffos X1 Max (Nougat). It is possible to root with Magisk Manager. Please note, that you have to unlock the bootloader (fastboot oem unlock).
Dont be afraid of "orange state" on bootup because of unlocking, this is not a problem.
Its a good idea to do this in two separate steps:
1. Unlock bootloader, see is phone is still working
2. root it
and .. no guarantee
Alex
---------- Post added at 02:47 PM ---------- Previous post was at 02:32 PM ----------
By the way, has anybody the stock rom with Android 6 ? On the homepage, there is only the latest version (Nougat). A short message would be nice
Thanks, Alex
Alex_Werner said:
Found a solution for Neffos X1 Max (Nougat). It is possible to root with Magisk Manager. Please note, that you have to unlock the bootloader (fastboot oem unlock).
Dont be afraid of "orange state" on bootup because of unlocking, this is not a problem.
Its a good idea to do this in two separate steps:
1. Unlock bootloader, see is phone is still working
2. root it
and .. no guarantee
Alex
---------- Post added at 02:47 PM ---------- Previous post was at 02:32 PM ----------
By the way, has anybody the stock rom with Android 6 ? On the homepage, there is only the latest version (Nougat). A short message would be nice
Thanks, Alex
Click to expand...
Click to collapse
Already had phone in "orange state" since I bought it.
Now I tried install Magisk Manager and got boot loop
It doesn't even worked flashing the stock boot.img.
---------- Post added at 06:21 PM ---------- Previous post was at 06:18 PM ----------
Alex_Werner said:
Found a solution for Neffos X1 Max (Nougat). It is possible to root with Magisk Manager. Please note, that you have to unlock the bootloader (fastboot oem unlock).
Dont be afraid of "orange state" on bootup because of unlocking, this is not a problem.
Its a good idea to do this in two separate steps:
1. Unlock bootloader, see is phone is still working
2. root it
and .. no guarantee
Alex
---------- Post added at 02:47 PM ---------- Previous post was at 02:32 PM ----------
By the way, has anybody the stock rom with Android 6 ? On the homepage, there is only the latest version (Nougat). A short message would be nice
Thanks, Alex
Click to expand...
Click to collapse
Forget it!!!
Downloaded by mistake the file for the X1 (non Max).
Unbricked and rooted
Many thanks Alex_Werner
And no... I can't find the MM rom
That is exacetly the same mistake, i have made the first time.
Can somebody tell me how to install TWRP on Neffos X1 Max? Please.
HerrCoolLess said:
Can somebody tell me how to install TWRP on Neffos X1 Max? Please.
Click to expand...
Click to collapse
I don't know.
Just how to install Magisk like stated before.
If you need instructions on this, let me know.
zakzor said:
I don't know.
Just how to install Magisk like stated before.
If you need instructions on this, let me know.
Click to expand...
Click to collapse
Yes, tell me please how to install Magisk because I now just how to install it with TWRP.
HerrCoolLess said:
Yes, tell me please how to install Magisk because I now just how to install it with TWRP.
Click to expand...
Click to collapse
Hi,
All the information is in the first post of this thread.
You can find the boot.img file to our phone on my Google Drive
If you need any detailed information, let me know.
Hope I've helped
zakzor
zakzor said:
Hi,
All the information is in the first post of this thread.
You can find the boot.img file to our phone on my Google Drive
If you need any detailed information, let me know.
Hope I've helped
zakzor
Click to expand...
Click to collapse
Thanks!
So far as i know, there is no TWRP for Neffos X1 Max. You can build it on yourself (If you can , i do not). You can find the list of supported devices here: https://twrp.me/Devices/
zakzor said:
Hi,
All the information is in the first post of this thread.
You can find the boot.img file to our phone on my Google Drive
If you need any detailed information, let me know.
Hope I've helped
zakzor
Click to expand...
Click to collapse
hi zakzor,can u show me the instruction please..many thanks
Hi,
There's an OTA update from 28-06-2018 which I received today.
The boot.img from the update doesn't work.
Use the same boot.img from stock 7.0 and you're good to go.
Best regards,
zakzor
please help ... iam looking for an mtk scatter file for neffos x1 max (tp903a) ... i need this to flash und unbrick the phone over spft ... the original scatter.txt from the manufacturere stock rom doesnt work ... iam very happy if someone has the right file for usage in spft ... thanks
M4RCJO said:
please help ... iam looking for an mtk scatter file for neffos x1 max (tp903a) ... i need this to flash und unbrick the phone over spft ... the original scatter.txt from the manufacturere stock rom doesnt work ... iam very happy if someone has the right file for usage in spft ... thanks
Click to expand...
Click to collapse
i can help you if you explain me how.
anybody found any custom rom for x1 max?
Hi,
i got good news about rooting Neffos X1 Max. Meanwhile, there is a twrp available. You can download it from here: https://unofficialtwrp.com/neffos-x1-max-twrp-3-2/. I have used it with the newest release R2911. Please note, that i do not installed "no-verity-opt-encrypt-6.0.zip" and it is working fine. After flashing this twrp (with fastboot flash recovery <filename>), i have installed the Magisk.zip (version Magisk-v20.4.zip) with twrp and installed the Manager in Version MagiskManager-v7.5.1 and it is working fine. Please note, that i can not guarantee that this will work with your device, but it has worked for me. And i can not give any further support, because i am not a developer. Do it on your own risk.
If you are interested how to remove the " Orange State" (this means the message at bootup and the 5 seconds delay), you have to follow this instructions: https://forum.hovatek.com/thread-31664.html. It is in german language, but google translate may be your friend...
This is working, too. You can use the "lk.bin" from the original update package, whitch you can download at Neffos. After patching, flash it with "fastboot flash lk lk.bin". But - be aware - no guarantee, but it has worked for me.
Greetings, Alex

Categories

Resources