I have a xolo q 800 that I rooted with framaroot....
Then I tried to install the cwm on it ..
Some sites said mobile uncle tools
But some told about the so flash tools method with the write memory method
.
I tried both of 'em but when I try to boot into recovery it just stays there at the xolo logo
The stock recovery worked and when I flash back the stock recovery
It works again
Please help ,
I will thank....
I'm not sure whether its the new one or the old but I'm sure its
Not the x-edition..
demkohell said:
I have a xolo q 800 that I rooted with framaroot....
Then I tried to install the cwm on it ..
Some sites said mobile uncle tools
But some told about the so flash tools method with the write memory method
.
I tried both of 'em but when I try to boot into recovery it just stays there at the xolo logo
The stock recovery worked and when I flash back the stock recovery
It works again
Please help ,
I will thank....
I'm not sure whether its the new one or the old but I'm sure its
Not the x-edition..
Click to expand...
Click to collapse
Can you provide more detail about this problem? And tell me what exactly is your problem?
Please press the thanks button if you think I helped
the phone is functional like the phone boots up and works n everything when i flash the cwm ... its just the cwm that gets stuck... after q minute or so the phone boots up normally ..
the xolo sticks only when doing the power button + volume rocker
Related
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Have u tried enter the emergency mode?
Sent from my WT19i using xda premium
ur phone has which cpu??? mence mtk or other??
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Do u have ur mobile model stock rom??
Sent from my Micromax A116 using xda premium
daviyankee said:
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Click to expand...
Click to collapse
Download Stock/ custom rom for XOLO A500 (Search In google or XDA )
Download CWM Recovery
Place Rom in memory card
Remove and install battery press vol up then press power key to get bootloader mode
flash this CWM recovery then flash rom through CWM
A500 Not booting
professor_proton said:
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Click to expand...
Click to collapse
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
sonujain10 said:
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
Click to expand...
Click to collapse
download cwm recovery from here https://www.dropbox.com/s/h3w1doejuh3ecq4/cwm_a500.img
flash using fastboot (bootloader)
reboot to recovery
cwm 6 will be there
flash stock rom
Xolo q500 softbricked
Can Anyone Help me. My Xolo Q500 is softbricked. It is niether booting normally nor booting to recovery menu. I have tried sp flash tools but the stock rom of my phone which i downloaded does not contain any scatter file, probably because it is a Qualcomm based device. Please help me..................
xolo q500 dead after formatted
sir please help me i do have the same problem
xolo q 500 i soft bricked using format while connect in the smart upgared tool
i tried to flash but its ask disk to be formatted i am unaware of it so i mistakenly formatted now the phone is not getting turn on
or in the recovery mode please help or tell me the procedure
Hi,
I tried to install CWM recovery in my A110 which is upgraded to stock V3 JB rom.i did all thing as per the guidelines for installing CWM recovery.SP flash tool showed Download is successfull.however i cant Boot in to CWM mode by pressing Power key,Vol+ and Vol-.instead screen just blinking two times and nothing will happens,somebody pls help.i am a newcomer
mailli 620
sushakps said:
Hi,
I tried to install CWM recovery in my A110 which is upgraded to stock V3 JB rom.i did all thing as per the guidelines for installing CWM recovery.SP flash tool showed Download is successfull.however i cant Boot in to CWM mode by pressing Power key,Vol+ and Vol-.instead screen just blinking two times and nothing will happens,somebody pls help.i am a newcomer
Click to expand...
Click to collapse
Bro mine only work in second time
The first time i flash, it no work, but the second all good
claudi82 said:
Bro mine only work in second time
The first time i flash, it no work, but the second all good
Click to expand...
Click to collapse
Bro,
Actually CWM is working with my device,i had installed Quick Boot on my device and by selecting recovery,phone restarts and goes to Recovery,but this not happens with the keypress,this is the prob.
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.
I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.
i tried to install custom recovery on my device
segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS
i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz
NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:
Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh
Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....
Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.