I purchased this case because it had a poly carbonate frame so I would not have to worry if it would interfere with signal strength. When I received it I was very happy with it until I tried to use it in the Samsung Docking Station and a Samsung Docking Charger. The case was too deep (thick) to slide into the Samsung dock charger. It did fit into the Samsung Docking Station, but there is a big gap between the ouside of the case and the connector. The plug is not long enough and so it cannot reach in and seat with the PC frame installed . If you remove the PC frame, it will seat with the case.
Other than that, it would be a keeper.
These are Note 3 stations - which the Note 4 seems to work fine in with no case.
Hi, I am pretty sure that you are not referring to Note 3 docking stations. Note 3 stations have wider USB 3.0 docking port. It would never fit to narrower USB 2.0 socket in Note 4 (and Note 2).
I have Spigen Capsule case on my Note 4 phone and can confirm, that it fits perfectly to dock on "Note 2 Samsung Multimedia Docking Station" (the one with 3x usb port and hdmi port). I had Neo Hybrid on Note 3 phone and it didn't fit to this station (too deep case on the bottom), so I guess that it will be same problem with Note 4 Neo Hybrid. That's why I purchased Capsule case from same manufacturer (looks much worse, but fits the dock).
Anyway, thanks for testing Neo Hybrid on Note 4 and for confirming that it doesn't fit
Related
Any suggestions for a Qi-Friendly Dual Layer Galaxy S4 case?
The Qi-receive I will be using is a generic PCB - thin type that sits under the battery cover.
I am considering the Spigen Slim Armor case, the Otterbox Commuter, and other dual layer (with outside material being smooth plastic) cases for under $40.
Galaxy S4 is such a fragile phone due to the thin structure, thin glass, and lack of external reinforcement.. The only metal reinforcement is the thin sheet of metal chassis.
I have already cracked the screen on my first Galaxy S4 inside a thin soft TPU rubber case and happened inside tight men jeans. Got it replaced by warranty plan.. Do not want to break it again..
PCB type Qi receivers are known for less distance and efficiency (The thicker coil, especially dual winding coils have longer range, but bulky and flaky NFC due to the unidirectional aluminum foil), and allows for less flaky NFC readings.
I am currently using the Spigen Neo Hybrid case for my S4 and it works perfectly fine with a QI charger
This mod for the SGP slim armor also works great for the Qi charger bump.
http://forum.xda-developers.com/showthread.php?t=2316133&highlight=credit+card
wish there's a case for the original qi case from samsung.
I just purchased a genuine Metal Slate color Slim Armor from my local store.
I insalled the Qi charging PCB receiver, and put the phone into the Slim Armor, works wonderfully.
The Qi Chargers I have used are a Japanese NTT Docomo Qi charger that came with my Fujitsu smartphone last year (which supported the Okudake Juuden), a generic white color USB based Qi Charger off eBay.
Both chargers works wonderfully, but the Docomo Qi charger has slight fast charging rates... I am using the original 2 amp charger that came in the S4 box. The Docomo Qi Charger can output 1-1.5 amps. My PCB receiver can receive around 0.7-0.8 amp (measured)
I can charge around 16-22% in an hour. When the battery hits 80%, it charges around 8-12% an hour... It also supports trinkle charge when it reaches almost full charge.
I can fully charge my brand new S4 with a brand new battery at full capacity in around 4-5 hours of time. If your battery has already worn down from discharging and recharging cycles, you can probably finish charging faster.
With the PCB Qi receiver, my NFC works very good even within the Slim Armor case..
I also tried to use the Qi receiver with the Otterbox Commuter, but has shaky connection with the charger. Even when the resonance frequencies pairs up between the receiver and transmitter, it emits a ever so slight coil frequency buzz. This is probably due to the fact that the distance between the 2 coils are at a minimal contact distance. If it charges, the charging rate is very slow, and sometimes when using the phone with light load like music listening with screen on, the battery recharging input is too low to keep up with the battery discharging rate, so I still lose battery percentage although I am plugged into the wall.
Hope this helps.
I'm using the ballistic sg maxx. It seems like a pretty thick dual layer case to me. I'm also using the wiqiqi receiver and versa charging pad and it works pretty good with my setup.
blwnv8 said:
I'm using the ballistic sg maxx. It seems like a pretty thick dual layer case to me. I'm also using the wiqiqi receiver and versa charging pad and it works pretty good with my setup.
Click to expand...
Click to collapse
Indeed. I realized the Qi wireless charging on my Galaxy S4 has much better range distance compared to the older Palm TouchStone mod I did on my Galaxy S3.
Using the Neo Hybrid and the LG Qi charger here.
i got that unicorn beetle case (i think that's the name). it "fits" with the glass screen protector and the wireless charging back (i still have to order a qi charger for my nightstand, office desk, and car, but im still looking for a case that will fit it perfectly. i really wish samsung shipped the phones with the wireless back, or at least make it the same size. is this a mythological case that i'm looking for? will any manufacturers step up to the plate? was this an issue with the note 3? i hope i can find the perfect case with a holster!
Samsung Galaxy Note 4 wireless QI Charging Modifi…: http://youtu.be/2-FEBpDieOg
Sent from my SM-N910T using Tapatalk 2
I use a Tech21 Classic Tactical case. It stretches around to fit the qi back. Tight fit but seems to hold up well.
So I just bought the note 4 and I'd like to get the wireless charging back. However I've heard that it's slightly thicker. Would it work with the sgp neo hybrid metal?
No. My review of it.
http://gavinsgadgets.com/2015/03/30/samsung-galaxy-note-4-official-s-charger-qi-wireless-kit-review/
I have a note 4 case. It's a nice thickness and protection.
but it's incompatible with the samsung qi charging.
Any recommendations for a note 4 case that is compatible with the samsung charging plate?
wait for reply~
There is an 11 page thread on this topic with several options.
http://forum.xda-developers.com/note-4/accessories/best-case-note-4-samsung-qi-charging-t2958395
I love my S view flip case.... Slips into a holster for another case perfectly... Does not offer as much protection as a full case.... But the Note 4 is so damn beautiful that I just bring myself to cover it up.
....love wireless charging! Been missing it since my old Palm Pre.
...sent from a phabulous HAL 9002, a Sprint Galaxy Note 4....
kevinw0312 said:
I have a note 4 case. It's a nice thickness and protection.
but it's incompatible with the samsung qi charging.
Any recommendations for a note 4 case that is compatible with the samsung charging plate?
wait for reply~
Click to expand...
Click to collapse
If you have not already purchased the Samsung wireless charging cover, go with this instead:
Qi-infinity™ Note 4 receiver with NFC Coil
This will fit under the original cover and allow you to use just about any case you want.
I have the Samsung wireless charging cover but switched to the Qi-infinity receiver and I can tell you that it works perfectly.
And now my case options are no longer limited.
I have the Spigen Slim Armor. works perfectly with my qi receiver
Sent from my SM-N910C using XDA Free mobile app
ozone777 said:
If you have not already purchased the Samsung wireless charging cover, go with this instead:
Qi-infinity™ Note 4 receiver with NFC Coil
This will fit under the original cover and allow you to use just about any case you want.
I have the Samsung wireless charging cover but switched to the Qi-infinity receiver and I can tell you that it works perfectly.
And now my case options are no longer limited.
Click to expand...
Click to collapse
may I know where is the thickest part of this receiver? The top near the contacts or the bottom part. I have the fonesalesman one and the thich part is the top and it pushes the back cover next to the heartbeat sensor... thanks
xdm9mm said:
may I know where is the thickest part of this receiver? The top near the contacts or the bottom part. I have the fonesalesman one and the thich part is the top and it pushes the back cover next to the heartbeat sensor... thanks
Click to expand...
Click to collapse
It's about the same as the Fonesalesman with a very slight bulge near the sensor.
Barely noticeable.
Ok we need a list of case that we can and cannot charge while using a wireless charger. Please include brand, model number and link if possible. Wireless charges, brand, model number and link if possible. Thanks. I will put all cases and wireless chargers in one post for a fast and easy look up, if mods allow.
Case - i-Blason Prime Series Dual Layer*- https://www.amazon.com/gp/aw/d/B013...+belt+clip&dpPl=1&dpID=519HbBaRRuL&ref=plSrch
Wireless charger - lugulake - sorry no model or link it was a cheap one for about 7$ on amazon.
It will not charge on this and many others looking at Amazon reviews. But it is a great case.
Reserved if need be
I use this one - Galaxy S6 Edge Plus Case, Spigen [CARBON FIBER] Neo Hybrid Carbon Case
Works with Samsung Wireless Charging Pad, Choetech Circle QI Charger and MobilePal QI Power Bank - 10000 mAh.
It's protective (I've dropped my phone on hard concrete once from waist height) and looks good too!
Slim Armor Case
Spigen [AIR CUSHION] Slim Armor Case for Galaxy S6 Edge+ Champagne Gold working great with samsung wireless charger !!!! http://www.amazon.com/Galaxy-Edge-Spigen-CUSHION-Armor/dp/B010MWH1UW
Just got the Choetech quick charge wireless charger. It works great with my Spigen Thinnest case liquid crystal, available on ebay for $12. It's a really nice case that doesn't mask the phone or make it bulky while still providing protection.
Ok got my choetech circle wireless charger this weekend. The one with its ownthread here. It also will not charge my phone with my i-blason case. The only way I could get it to charge with the case on is to pop off the built in kick stand then it will charge with the case on. I also have the casemate naked tough case http://www.t-mobile.com/accessories...ge-plus-case-mate-naked-tough-case-clear.html the choetech wireless charger has no problems at all charging with this case on.
All these covers worked with wireless charging on 2 different wireless chargers and non of them was Samsung:
Galaxy S6 Edge Plus Case, Verus [Crystal Bumper][Shine Gold] - [Clear][Drop Protection][Heavy Duty][Minimalistic][Slim Fit] -For Samsung Galaxy S6 Edge+ SM-G928 Devices https://www.amazon.com/dp/B0131KPZU0/ref=cm_sw_r_awd_PTVewbE36M5P1
Galaxy S6 Edge Plus Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Galaxy S6 Edge+ (2015) - Crystal Clear (SGP11699) https://www.amazon.com/dp/B010MWEWVS/ref=cm_sw_r_awd_YUVewbXG4VD1D
Galaxy S6 Edge Plus Case, i-Blason [Scratch Resistant] Halo Series Hybrid Clear Case / Cover with TPU Bumper for Samsung Galaxy S6 Edge Plus + (Clear (Scratch Resistant)) https://www.amazon.com/dp/B013D5FFUS/ref=cm_sw_r_awd_pVVewb3XG9XYM
Galaxy S6 Edge Plus Case, Enther® [Ultimate Cushion]Galaxy S6 Edge Plus Case Clear Slim Scratch / Dust Proof Hybrid Transparent Case with Shock Absorb Trim Bumper https://www.amazon.com/dp/B013RZ9GEK/ref=cm_sw_r_awd_NVVewb6J8K7NX
My favorite is the first one in terms of look, feel and no finger print left, but I wish it was thinner..
Official Samsung S-View case is working fine with wireless charger.
Every official case I own (Crystal, Crystal View, S-View) and Spigen Liquid, Rock ultra thin TPU are working wine in Fast Charge mode.
k4syx said:
Every official case I own (Crystal, Crystal View, S-View) and Spigen Liquid, Rock ultra thin TPU are working wine in Fast Charge mode.
Click to expand...
Click to collapse
Fast charge mode, or wireless fast charger. I will be condensing and making the list I. On post soon.
UAG case (http://amzn.to/1PjUz9v) works with a wireless charger that I picked up from IKEA for $28
Edit: Link to IKEA charger http://www.ikea.com/us/en/catalog/products/80308307/
Wireless fast charge mode-you'll see what I mean when you'll get the charger. Just look at the notifications