My LG G PRO 2 350L cannot boot into recovery. Tried flashing through tot and dll. But it also fails.
My phone is not connecting to network(SIM) and I am much depressed. Please advise.
Also phone doesnt show IMEI number when I press *#06#
Related
Hi i just bought a refurbished lg g2 and accidently flashed a d802 kdz into my d800 then the imei was gone and touch was not working so i googled and i edited the tot file and flashed everything was going fine but at 94% of flashing it gives me an error that download failed anyhow when i turned on my phone the touch was working fine but imei was not avaliable and the phone restarts itself after one minute any help would be appreciated plz help me
Hi i just bought a refurbished lg g2 and accidently flashed a d802 kdz into my d800 then the imei was gone and touch was not working so i googled and i edited the tot file and flashed everything was going fine but at 94% of flashing it gives me an error that download failed anyhow when i turned on my phone the touch was working fine but imei was not avaliable and the phone restarts itself after one minute any help would be appreciated plz help me
Dear friends,
I am in deep trouble. Few days ago I have flashed CM rom on my LG G3 F400L. Now the problem is after waking up today I find my set totally dead. I can't enter into recovery mode with holding buttons. The phone stucked into LG logo. Tried many times to flash with LG flash tool. But it says download fail, device model is different.Check ur phone or dll. Tried generic dll but not working. Any help will be much appreciated. Thanks.
My LG v10 stuck on LG Logo, but when I attach an USB cable with computer it further goes to att logo and after 3 or 4 spins, it again stuck on att logo. I can get into download mod but not recovery or safe mod. I tried to flash my phone with LGUP but it shoes unknown model. tried with upper cut and common folder options but no luck. LG flash toll 2014 does not detect my phone and application stop responding when I try to read phone information. tried on different computers, different USB cables and different windows but the result is same. Once I had a LG f350 and faced the same problem. Only LG Flash tool 1.8 worked for my LG F350. I am hope full it may work for my LG H900 but I can't find TOT+dll file for LG H900 nowhere. Any one can help please.
I was on 5.1.1. rooted, Super SU and busy box installed when I tried to factory reset my phone and got into this trouble.
More Problems
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Shahidessa said:
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Click to expand...
Click to collapse
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
SandyKick said:
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
Click to expand...
Click to collapse
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Shahidessa said:
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Click to expand...
Click to collapse
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
SandyKick said:
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
Click to expand...
Click to collapse
Great.... I am happy for you... My phone rejected by 3 repair shops as my friend told me.....
Hi I have a LG Sp200 (Sprint) that I cross-flashed a LG K8 (2018) KDZ using LGUP and everything was working fine until I attempted to root the phone by flashing a LG m250DS KDZ. Before flashing the final kdz that bricked my phone, I did make a backup by dumping my firmware using LGUP but I'm not sure how to flash them since my phone is completely dead (no download mode / recovery / boot) The only thing my phone does is show up as LGE mobile serial port, LGE mobile modem port, and MTK usb port. If anyone has any idea or advise on how to get this phone back up it would be greatly appreciated. Thanks
send dump fw
kings1988 said:
hi i have a lg sp200 (sprint) that i cross-flashed a lg k8 (2018) kdz using lgup and everything was working fine until i attempted to root the phone by flashing a lg m250ds kdz. Before flashing the final kdz that bricked my phone, i did make a backup by dumping my firmware using lgup but i'm not sure how to flash them since my phone is completely dead (no download mode / recovery / boot) the only thing my phone does is show up as lge mobile serial port, lge mobile modem port, and mtk usb port. If anyone has any idea or advise on how to get this phone back up it would be greatly appreciated. Thanks
Click to expand...
Click to collapse
could you send me copy of the dumped fw?
never another mediatec
anyone gotta fix...i flashed wrong as well on my sp200....ive spent hours trying to use the sp flash tool with no avail..i cant come up with a good scatter file and i keep getting brom error 006003 ....only recognized on pc for like 3 seconds then nothing..help
same situation here ..
no SP FLASH TOOL firmware , no scatter , no AUTH FILE
Sp200 not bricked?
Please some should kindly help me.. I flashed SP200 with K8 rom, wanting to unlock it, but now wen you on the Sp200 it will show K8+ logo n then move to black screen where"[LGE] [Recovery] [OP Image] op_status: 0 Supported API: 3" keep popping at the base of the screen.
I will love to hear from you soon..
Thanks