Related
hi all xda community !
So here is the situation :
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
Symptom:
I'm Stuck in a bootloop after i flash the 3.24 firmware and the Elegancia ROM.
First Time the roms boot normaly, then i reboot with the USB Cable attach.
And here come the BootLoop
Try to go to recovery, but bootLoop too.........
So I can go in Hboot, i can do FASTBOOT command and that all.
I try to flash CWM from fastboot -- > Ok for flash but wont go in recovery..
Try to flash 1.17 firmware then flash ROM.zip from 1.35Ruu Europe release --> Bootloop
Try to Flash 3.24 Ruu Same BOOTLOOP..
So what can I do community ?
What Solution i have ?
Why i cant flash a recovery since i Have S-OFF ??
MAYBE :
- Maybe i flash a Ruu who was Corrupt
- Maybe the radio don't match the Ruu i Tried to flash
- Maybe i'm just a simple mind guy
It seems that the 3.24 Firmware from SebastianFM with hBoot unlock have some problem, cause it seems that i'm not the only one who got several problem after flash this Firmware.
toowave said:
hi all xda community !
So here is the situation :
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
Symptom:
I'm Stuck in a bootloop after i flash the 3.24 firmware and the Elegancia ROM.
First Time the roms boot normaly, then i reboot with the USB Cable attach.
And here come the BootLoop
Try to go to recovery, but bootLoop too.........
So I can go in Hboot, i can do FASTBOOT command and that all.
I try to flash CWM from fastboot -- > Ok for flash but wont go in recovery..
Try to flash 1.17 firmware then flash ROM.zip from 1.35Ruu Europe release --> Bootloop
Try to Flash 3.24 Ruu Same BOOTLOOP..
So what can I do community ?
What Solution i have ?
Why i cant flash a recovery since i Have S-OFF ??
MAYBE :
- Maybe i flash a Ruu who was Corrupt
- Maybe the radio don't match the Ruu i Tried to flash
- Maybe i'm just a simple mind guy
It seems that the 3.24 Firmware from SebastianFM with hBoot unlock have some problem, cause it seems that i'm not the only one who got several problem after flash this Firmware.
Click to expand...
Click to collapse
Follow this thread .
http://forum.xda-developers.com/showthread.php?t=1480061
I doubt you may have to look the highlighted red text.
hi & thks
I already read this thread, problem is that i can't flash anything except Ruu Roms with fastboot or maybe i can but i don't know how to do ..
i already try to flash recovery (CWM) but bootloop when i want to go to recovery
if you now how i can have a recovery to work, or maybe if i can wipe everything with fastboot i would appreciate
toowave said:
hi & thks
I already read this thread, problem is that i can't flash anything except Ruu Roms with fastboot or maybe i can but i don't know how to do ..
i already try to flash recovery (CWM) but bootloop when i want to go to recovery
if you now how i can have a recovery to work, or maybe if i can wipe everything with fastboot i would appreciate
Click to expand...
Click to collapse
I got you. Actually you do not have any custom recovery installed. Actually if you flash any RUU it will wipe your recovery partition and install stock recovery. So first you flash a custom recovery. I know you tried to flash CWM.But you got bootloop. Did you delete the file PG58IMG.zip from sdcard after flashing CWM ???? Please redo the following steps.
STEPS TO FOLLOW:
1. Download recovery v5.0.0.8 for the Sensation here .
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone.
4. Remove the battery.
5. Wait a minute.
6. Put the battery again.
7. Press Power + Volume Down key together.
8. The phone will boot into bootloader.
9. Press Volume up to Accept when it asks" Do you want to start the update"
10. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
11. It may not boot . Do not worry because you may have wiped out evrything.
12. Power off your phone.
13. Delete PG58IMG from your memory card .
14. Download your favorite custom ICS ROM.
15. Put it on the root of your SDCARD.
16. Remove the battery.
17. Wait a minute.
18. Put the battery again.
19. Press Power + Volume Down key together.
20. The phone will boot into bootloader.
21. Select "Recovery" by pressing Volume Down Key.
22. Press Power button after selecting Recovery.
23. Your phone will reboot into clockworkmod recovery.
24. Wipe system, boot, cache, data , and dalvik cache
24. Install your ROM from SDCARD.
25. Wait at least 7 to 10 minutes for first boot
26. Your phone will be normal now.
NOTE:
******* You must be SuperCID to do the above. Please also note , from your preveous post, I understand that you have V3.24 Firmware. Remember only ICS rom will work with this firmware. So do not flash Gingerbread ROM.**********
hi help is appreciate,
`So i tried to follow your step 3 times . One with 1.17 Firmware 3.12 & 3.24.
every time after flashing the recovery, i reboot and when i go to recovery the phone go into boot loop.
toowave said:
hi help is appreciate,
`So i tried to follow your step 3 times . One with 1.17 Firmware 3.12 & 3.24.
every time after flashing the recovery, i reboot and when i go to recovery the phone go into boot loop.
Click to expand...
Click to collapse
Which ROM you want to flash ??
Why did you try all three firmware ???? You should choose your firmware according to your ROM you want to flash.
You may get boot loop after flashing recovery as there might be no rom installed.
So as I said after flashing recovery you should power off your device. Then boot into bootloader by the preveous method. ( Step 3 to 7 ).Selct recovery by volume down key. Then press power button. You will be in recovery. And flash your ROM. But your ROM should match with the firmware.
Ok but How could i flash a ROm if i can't go to recovery ...
Ok maybe you miss understand, i got boot loop when i want to go to recovery too
Please tell me what ROM you want to flash. Post the link here. And once again you give the details of your boot loader screen. Do you have fastboot/adb set up on your PC?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Android Revolution : http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
Seem to be a good Base.
I can Do fast boot command, but no adb .
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
toowave said:
Android Revolution : http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
Seem to be a good Base.
Click to expand...
Click to collapse
Ok you want arhd 6.2.1 . Tell me your cid. And where is the details of your current boot loader screen?
You did not tell me whether you have adb/fastboot set up..
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Ok i edit my previous response, with the informations you want.
And i'm super CID.
other Things, the phone won't want to charge cause he repeatedly try to boot.
toowave said:
Ok i edit my previous response, with the informations you want.
And i'm super CID.
other Things, the phone won't want to charge cause he repeatedly try to boot.
Click to expand...
Click to collapse
So, Let fix the recovery first.
Download this attatched recovery (4Ext Touch).
MD5 Checksum : d31d7df8d275f7234416af6a2e8b1c73
Check the md5check sum after download. If it matches , go to the next step else redownload.
Put the downloaded recovery.img in the directory of your fastboot binary.
Connect your phone with pc via usb cable.
Reboot your phone into bootloader.
Open fastboot command from your pc.
Now type the following command in fastboot.
" fastboot flash recovery recovery.img "
After flashing type " fastboot reboot"
Now try to go to recovery. If it is successfull then I will tell you the ROM flashing part.
Please come on gtalk . My gtalk id is musarraf172
ok i'm on gtalk wait for ya
so i'm still in the BOotLoop mode.
i've tried almost everything who was in the forum.
i'm aware of the noob style problem(Firmware not updated, still got PM58IMG.zip in SDcard, wrong Rom--firmware etc ..) and i'm not in this case !!!!
I think the device is brick but maybe someone with good knowledge, and experience can help me.
For now i got the last Hboot, i can flash recovery from fastboot , the command return OK but recovery wont boot.
Ruu flashing run nice with no problem but don't Boot (.exe and PM58IMG.zip).
when i try to unlock bootloader (who is already mark S-OFF but just for try)
with the HTCDEV method i'm stuck on the Unlock bootloader screen and i can't click YES.
it seems that my data partition have disappear ...
I here if you need more information.
Maybe someone can tell me if it's possible to FullWipe from fastboot ?
toowave said:
so i'm still in the BOotLoop mode.
i've tried almost everything who was in the forum.
i'm aware of the noob style problem(Firmware not updated, still got PM58IMG.zip in SDcard, wrong Rom--firmware etc ..) and i'm not in this case !!!!
I think the device is brick but maybe someone with good knowledge, and experience can help me.
For now i got the last Hboot, i can flash recovery from fastboot , the command return OK but recovery wont boot.
Ruu flashing run nice with no problem but don't Boot (.exe and PM58IMG.zip).
when i try to unlock bootloader (who is already mark S-OFF but just for try)
with the HTCDEV method i'm stuck on the Unlock bootloader screen and i can't click YES.
it seems that my data partition have disappear ...
I here if you need more information.
Maybe someone can tell me if it's possible to FullWipe from fastboot ?
Click to expand...
Click to collapse
if yo can go in fastboot your likley not bricked.
you can always flash the original or similar ruu (not a rom) you phone came with in fastboot.
so you will go to stock with your hboot and recovery and to see if it boots.
then do the whole process over. s-off, then root.
then check your mid and cid if its supported.
and only then update to ics.
btw whats the type of phone? branded or og htc
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
toowave said:
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
Click to expand...
Click to collapse
Come on g talk
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
toowave said:
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
Click to expand...
Click to collapse
yes the rom the phone came with or close to it (any with recent ota`s).
always flash the ruu.exe because it wil recover the hboot, radio and recovery to stock. (zipfiles can be easily corrupted)
so go in fastboot usb (via power and volume button) and run the ruu.exe
then s-off/root the device
when s-off you should be able to install recovery within the original rom like cwr or ext4 updater tool, backup, then check your mid and cid, get a correct zipfile for the ics firmware update, flash arhd (it includes the lastest ext4 recovery). then change roms if you like.
you then also can check if the phone is working correctly.
if you already changed to supercid, i think its oke.
if not, on the forum there is al list of cid`s from different countrys and brands.
also there is al list of originals ruu the devices came with.
i assume you have done custom roms before ics came out?
so the cupercid was applied correctly?
i never supercid my devices (on a personal note)
and always flashed the testroms (to get the latest firmware) with no probs.
but if your branded its mandatory.
i've already flash 3 Ruu from this thread : http://forum.xda-developers.com/showthread.php?t=1074559
and all finish in a bootloop with no stock recovery... almost all Ruu run fine with no alert
ruu i flashed already :
RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.
RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.25.401.101_Radio_11.68.3504.00U_11.21.3
Hello guys,
i got a problem. So i want to flash a boot.im gfile in the bootloader with flash-boot-windows.bat.
The problem is that i can see the statusbar in the phone, and see that the cmd tries to push the boot.im to the phone ... but nothings happen -.-
Any Idea ? Im affraid if i have crashed the boot poartition-.-
But the phoen is further working until now
Regards,
Snot
Check out fipsibs tutorial and learn to do it "properly" with fastboot (which is what the script you're using does anyway) and it'll be easier to see what's going on. Plus after you set it up once you're not depending on someone to make scripts fot you and can also use ADB and other fastboot commands http://forum.xda-developers.com/showthread.php?t=1752270
[Tutorial] How to flash a new boot.img via Fastboot
i know the tutorial .... its hanging here:
C:\Users\User\One_S_All-In-One_Kit_v1.1\Data>fastboot flash boot boot.img
sending 'boot' (6202 KB)...
And nothing is happen now. I see the green statusbar in the right corner ... but it dont fills up
hello in
http://forum.xda-developers.com/showthread.php?t=1658158
you can find stock boot.img with self flash under the
LeeDrOiD One Supreme V2.0.0 boot.img (Self flash)
there you have it, small letters. Try this
How do you mean you can see the status bar on the phone? It should be started in bootloader mode then select fastboot. I guess you did this or fastboot should give you an error... Do you get your serial number from "fastboot devices"? If so fastboot is OK, then I'd check md5sum of the boot.img. You're not trying to flash boot image for S4 device to an S3 right?
yeah i could see my device with fastboot devices. Its there ...
I can see a green status bar at flashing the rom, in the right upon corner at the telefon screen.
But the status does nothing there until i disconnect the cable after 10 or more minutes ...
I try to flash the MoDaCo.one for the HTC One S Rom ... my CPu has 1512 mhz what means i have a S4 right ?
I got no failure ... only a freeze in the progressbar ... it seems that the fastbook is unable to put the file to the mobile ... ?!
I was have the same problem for me work LeeDroid self flash but if i good remember i first flash it stock recovery via One_V_All-In-One_Kit_v1.0 it
must be the 1.0 version
Hmmm where i can get the stock HTC recovery ?
Is there a connection between the recovery and the bootloader ?
In this version 1.0 there you have stock recovery, about connection with bootloader i dont know its just works for me
Sent from my HTC One S using xda app-developers app
I think i got the problem ... the bootloader is s-on ...
but i already can install custom roms so i dont know whats happen -.-
Cant unlock it with the Unlock_code.bin ...
I have s-on too, unlocked bootloader and root. Do you try this program 1.0 version ?? i was trying everything my phone was dead only recovery was working but sdcard was unmaount and this helps
krewett said:
I have s-on too, unlocked bootloader and root. Do you try this program 1.0 version ?? i was trying everything my phone was dead only recovery was working but sdcard was unmaount and this helps
Click to expand...
Click to collapse
Yea your right ! My bootloader is unlocked too i see now ...
What you mean with programm 1.0 version exactly ?!
One_S_All-In-One_Kit version 1.0 i have it if you wont it in my case this green line on the corner was stoping before end, and then stops i was waiting one time 20 min and nothing after that i was traying everything and this program One_S_All-In-One_Kit version 1.0 hi push this stock recovery , i was see that this green line go to the end and magic 100%, i was have stock recovery and after this i try flash boot.img and works on first time before i was trying flash my boot maybe 30 times
There is no way to S-off the One S yet and being S-on won't prevent you from fastboot flashing a boot image. The recovery is a separate basic OS loaded from its own partition instead of your regular ROM, this happens after the bootloader mode so this has nothing to do with fastboot. What is the boot.img for, which ROM? Did you check the md5sum? Also you could try the earlier version of the all in one kit I guess, or redownload the one you got if you don't want to install the Android SDK.
Ok the solution was simply to use another pc ... Even the fastboot founds my One S i cant put the boot img to it.
With my notebook i works instantlly ... no idea but it works now
for me it helped to change the USB port I connected the device. The thing is it should be connected to a primary USB, not a HUB!
I recently bought a HTC One XL 4G from the Telstra Shop. I unlocked the bootloader successfully through the HTC DEV website. Downloaded Hasoons 2000 HTC One X All in one kit and flashed the kernal with stock 2.6.39.4. The phone rebooted, displaying the message 'this mode is for development purposes...' Phone is running image version 2.40.841.4, HBOOT 1.14.0002. Radio 0.20os.32.09.15. EVITA S-ON.
What I can do: I can boot into recovery mode. The device in windows is displayed as 'my HTC Phone'. I can send Fastboot commands through the CMD window to relock bootloader, restart, clear cache etc.
What I can't do: The factory reset, clear storage,recovery etc when pressed reset the phone back to the ''this mode is for development purposes...' message. I have tried to use an ROM Ruu updater utility to reset back to stock but cannot find the right version for 2.40.841.4. I have downloaded a Stock_Root ODEX 2.40.841.4 that matches, however not sure how to install onto phone.
Obviously I am an extreme noob, however there does not seem to be many resources for the HTC One XL roms. Really run down with this process, don't seem to be making any headway. Should I send this back to Telstra ?
Please Help !!!!!
Connect to PC, install twrp recovery, boot into recovery, download and place flashable stock kernel or any ROM on your device ( you can mount sd card through recovery ).
You can also just download and flash kernel ( boot.img ) using below command while you have your phone in fastboot USB mode connected to PC
fastboot flash boot boot.img
Sent from my HTC One X using Tapatalk 2
kancherlapraneeth said:
Connect to PC, install twrp recovery, boot into recovery, download and place flashable stock kernel or any ROM on your device ( you can mount sd card through recovery ).
You can also just download and flash kernel ( boot.img ) using below command while you have your phone in fastboot USB mode connected to PC
fastboot flash boot boot.img
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply, appreciate your time. I connected to PC, successfully flashed 'openrecovery-twrp-2.3.1.0-evita'. Rebooted phone, stuck in loop still resets to 'this build is for development..' then switch off, then switches on again.
How do I boot into recovery ? ...the next step ?
power off -- then hold power + volume down - It will go to fastboot - from there you can go to recovery
kancherlapraneeth said:
power off -- then hold power + volume down - It will go to fastboot - from there you can go to recovery
Click to expand...
Click to collapse
Thanks so much. I am back in business.
i need help my htc desire s got stock on bootlogo after attempting to update. due to power interuption i was not able to finish my update.. i run ruu stock to recover my phone but suddenly after rebooting bootloader my phone freeze.. i also run htc unlock bootloader but i got also an error.. any helps pls.. tnx.. godbless
locklim13 said:
i need help my htc desire s got stock on bootlogo after attempting to update. due to power interuption i was not able to finish my update.. i run ruu stock to recover my phone but suddenly after rebooting bootloader my phone freeze.. i also run htc unlock bootloader but i got also an error.. any helps pls.. tnx.. godbless
Click to expand...
Click to collapse
Check this thread
http://forum.xda-developers.com/showthread.php?t=1150917
and this:
http://forum.xda-developers.com/showthread.php?t=1284196
and this:
http://forum.xda-developers.com/showthread.php?t=1756287
if your problem is nothing of the sort ( above mentioned )
try to extract the rom zip from the RUU,
-rename it to PG88IMG
-place it on your sdcard ( but do not place it in ny folder )
-reboot to bootloader, let it check for an update
and hopefuly install that...
there is also a fastboot command- in case of some trouble with bootloader checking
fastboot oem reboot ruu
Edit: many usefull links:
http://forum.xda-developers.com/showthread.php?t=1146601
htc desire s bricked
thanks for the reply sir...
i cannot run command for adb shell to check if my eMMC chip is not corrupted because my phone cant detect with my computer i already installed the drivers for my phone. The only thing that i can used command are for fastboot command
i tried to run stock ruu for my phone, then i copied the temp folder rom zip file then rename it as PG88IMG and place it on my sdcard, then reboot to bootloader, theres a pop message to confirm if ill update the phone i select the ok to update then suddenly showed bootloader updating and it tooks
around 1hour for updating but nottings happen it freezes..... thanks...
Hi Everyone,
This is the first time I am playing with a mobile software.
I did the unlock bootloader as per the instructions given in htc website, and my phone status shows unlocked, but it is still S-ON.(Hboot 2.51)
I was planning to install a custom rom either CM11 or MIUI5.
After reading many threads in xda as well as in other sites, I tried to do a S-OFF to install a custom ROM.
I tried Rumrummer, Moonshine and firewater, but nothing has made my mobile as S-OFF.
I tried to restore back to the original stock rom, and followed the process in htconeforum(how-unbrick-restore-htc-one-s-stock-relocked)
So, I tried to do an oem lock and it got relocked.
Now, I tried to do an RUU, and it didn't work with data transfer error.
Only Hboot comes on my phone with the below details
***Tampered***
***Relocked***
My Phone doesn't start now; tried pushing lot of CWM and TRWM recoveries, it got stuck in sending recovery for long time, and i exit.
Can anyone please help me and let me know, how can i restore back to htc rom or go forward and install custom rom.
Thanks,
Deepak
deepak_raja20 said:
Hi Everyone,
This is the first time I am playing with a mobile software.
I did the unlock bootloader as per the instructions given in htc website, and my phone status shows unlocked, but it is still S-ON.(Hboot 2.51)
I was planning to install a custom rom either CM11 or MIUI5.
After reading many threads in xda as well as in other sites, I tried to do a S-OFF to install a custom ROM.
I tried Rumrummer, Moonshine and firewater, but nothing has made my mobile as S-OFF.
I tried to restore back to the original stock rom, and followed the process in htconeforum(how-unbrick-restore-htc-one-s-stock-relocked)
So, I tried to do an oem lock and it got relocked.
Now, I tried to do an RUU, and it didn't work with data transfer error.
Only Hboot comes on my phone with the below details
***Tampered***
***Relocked***
My Phone doesn't start now; tried pushing lot of CWM and TRWM recoveries, it got stuck in sending recovery for long time, and i exit.
Can anyone please help me and let me know, how can i restore back to htc rom or go forward and install custom rom.
Thanks,
Deepak
Click to expand...
Click to collapse
Well i got S-OFF with Rumrummer but i got it till my 7th try. you should keep trying with it
Stuck in sending recovery/sending zip flash
Some how , I managed to push CWM recovery to my phone.
But when I select install from zip, it says "Error mounting SDCard".
I tried the fastboot oem lock using all in one tool kit and now it says Tampered, Relocked.
So, i am trying to run factory RUU exe , it stuck at sending recovery.
I tried to push the .zip factory RUU, and it says sending and stuck there.
Even I tried the adb sideload, it says data transfer failed.
Looks like all the data on the SD card(in my case internal storage) is gone during erase and I don't have any flash zips on the device and I am not able to send any flash zips to the device.
The drivers are installed correctly, and my HBoot 2.15 says fastboot usb when in bootloader, but when i type adb devices, it gives no device.
Can some one please help me in getting my phone back.
Thanks,
Deepak
deepak_raja20 said:
Some how , I managed to push CWM recovery to my phone.
But when I select install from zip, it says "Error mounting SDCard".
I tried the fastboot oem lock using all in one tool kit and now it says Tampered, Relocked.
So, i am trying to run factory RUU exe , it stuck at sending recovery.
I tried to push the .zip factory RUU, and it says sending and stuck there.
Even I tried the adb sideload, it says data transfer failed.
Looks like all the data on the SD card(in my case internal storage) is gone during erase and I don't have any flash zips on the device and I am not able to send any flash zips to the device.
The drivers are installed correctly, and my HBoot 2.15 says fastboot usb when in bootloader, but when i type adb devices, it gives no device.
Can some one please help me in getting my phone back.
Thanks,
Deepak
Click to expand...
Click to collapse
I suggest you get the OTG USB cable. Load the ROM on a Flash USB and then use TWRP to install the ROM (Remember to mount the OTG in TWRP) Check Amazon, it only cost less than $3. I've never push the ROM to the phone. Saves a lot of time when you have multiple phones.