hey!
I have jiake jk12, last week, for no reason my screen goes negative, after some time it become white and then normal, and again white...
Right now it's just white.
I tried to get in recovery mode or something else but the screen still white so I don't really know if I succeed to get in the recovery mode...
From what I know, negative screen can't be hardware problem so the only thing left to do is to install new rom.
I tried to install new rom (from needrom) with Flash Tool but I think the Flash tool can't catch the phone.
When I connect the phone I hear that sound of new device connected and after some seconds the sound of the disconnected, and after another few second the Flash Tool goes 'not responsive' for a couple of seconds and then nothing...
Any suggestions?
Thank you!
You'll have to replace the Display Screen... That's what I can figure out right Now...
Press Thanks if it helped!
N'ayam Amarsh'e said:
You'll have to replace the Display Screen... That's what I can figure out right Now...
Press Thanks if it helped!
Click to expand...
Click to collapse
I believe it isn't hardware problem because that before the screen become white it was negative, and negative can't be caused by hardware problem.
Can somebody help me?
I really don't know what to do...
Why I can't install new rom?
What am I missing?
Someone, please??
elyasaf1230 said:
Someone, please??
Click to expand...
Click to collapse
I think you should turn to Service Center for Help... They can tell you the real problem...
N'ayam Amarsh'e said:
I think you should turn to Service Center for Help... They can tell you the real problem...
Click to expand...
Click to collapse
I don't think Jiake have Service Center..
I Don't know why I can't install new rom..
Related
hello.. i have looked for the answer to my question but i cant seem to find it, therefore i created this post.. sorry if i posted in the wrong section or if it is already out there.. i hope mr clown doesnt close my thread.
i rooted my phone doing it with the one click tool, and it worked perfectly fine.. the problem started when i tried to install a custom rom on it.. i installed rom manager and cwm fine.. but the problem is that i was following this instructions..
http://forum.xda-developers.com/showthread.php?p=11557769
which i read i had to get this rom...
http://forum.xda-developers.com/showthread.php?t=868720
the problem is that i didnt realize that i needed eng s off and i had s off wich therefore i wasnt able to see the cwm screen..
following the steps that told me to wipe the data with the wipedat.zip.. i did it through rom manager.. when the phone rebooted it went to a dark screen slowly so i took the battery out, and now is frozen in the htc logo... i have tried the up/down/power combo but the phone vibrates 3-4 times and then it goes to a black screen with the light on... but i dont get anything else.. so im really stock at either htc screen or black screen... i need help!!! i hope some one nows a good way for me to fix this.
Try pulling battery...wait a minute...then replace battery. Hold volume down as you power it on. Should get you in hboot.
Nickovtyme said:
Try pulling battery...wait a minute...then replace battery. Hold volume down as you power it on. Should get you in hboot.
Click to expand...
Click to collapse
ur a genious!!!!!!!
thank u so much!!!!!!!
Nickovtyme said:
Try pulling battery...wait a minute...then replace battery. Hold volume down as you power it on. Should get you in hboot.
Click to expand...
Click to collapse
puneta26 said:
ur a genious!!!!!!!
thank u so much!!!!!!!
Click to expand...
Click to collapse
Heh...I wish...I've just had a couple Roms hang in bootloop...or stick on boot...or what have you. I had t learn...
Read this link...it'll help ya:
http://forum.xda-developers.com/showpost.php?p=12611520&postcount=6
Hello dear users, i have a problem with my r800i 2.3.4. I tried to flash Cyanogenmod 9,i forgot some steps and after flashing my phone is dead.It doesnt open and i cant do something about that.Could you help me please? :crying: HELP!!! SORRY FOR MY BAD ENGLISH
flash stock rom via flashtool of ur Mobile
I know it is hard if English is not your mother tongue, but you should provide more specific information if you really expect someone to help you solve this issue.
Like how "does it not open"?
Can you turn it on?
Does a Logo appear before it goes black?
Did you already try if you can boot into recovery (Reboot your phone in to recovery: Keep Tapping Vol Down or Back or Another key when device is booting)?
But first of all you should post your help request in the appropriate forum:
http://forum.xda-developers.com/forumdisplay.php?f=1252
McFex said:
I know it is hard if English is not your mother tongue, but you should provide more specific information if you really expect someone to help you solve this issue.
Like how "does it not open"?
Can you turn it on?
Does a Logo appear before it goes black?
Did you already try if you can boot into recovery (Reboot your phone in to recovery: Keep Tapping Vol Down or Back or Another key when device is booting)?
But first of all you should post your help request in the appropriate forum:
http://forum.xda-developers.com/forumdisplay.php?f=1252
Click to expand...
Click to collapse
Well sorry for my ''early'' answer. I cant turn it on,when i am going to do this an orange light lights up on the turn on button.It goes on black screen and then nothing.No logos are appeared. I tried to flash the default kernel from there http://www.androidgadgematic.com/2012/06/how-to-fix-bricked-sony-xperia-android.html but i couldnt. The last time i did this i kept tapping the search button until it lights the blue led light on the turn on button, i tried to flash the file which is given on the site that i gave to you but it didnt happens anything. If you have any other questions write me to make it easier to help me for my problem. My phone has unlocked bootloader but it isnt root
I'm sorry man, I'm too much of a noob myself to really help you out.
That's why I gave you the link to the appropriate forum:
http://forum.xda-developers.com/forumdisplay.php?f=1252
The guys there have the same Phone as you, chances that s.o. will know what to do are better
McFex said:
I'm sorry man, I'm too much of a noob myself to really help you out.
That's why I gave you the link to the appropriate forum:
http://forum.xda-developers.com/forumdisplay.php?f=1252
The guys there have the same Phone as you, chances that s.o. will know what to do are better
Click to expand...
Click to collapse
Thanks!!!!!:good:
Can you help me
mohsin24 said:
flash stock rom via flashtool of ur Mobile
Click to expand...
Click to collapse
More information to help you to find me an answer: I cant turn it on,when i am going to do this an orange light lights up on the turn on button.It goes on black screen and then nothing.No logos are appeared. I tried to flash the default kernel from android gadgematics but i couldnt. The last time i did this i kept tapping the search button until it lights the blue led light on the turn on button, i tried to flash the file which is given on the site that i gave to you but it didnt happens anything. If you have any other questions write me to make it easier to help me for my problem. My phone has unlocked bootloader but it isnt root. After this can you give me some more information,like how to flash with the right way my phone or any other advices? I have the xperia play r800i 2.3.4 which i reported yesterday.
think you bricked your phone
TheVeteran said:
More information to help you to find me an answer: I cant turn it on,when i am going to do this an orange light lights up on the turn on button.It goes on black screen and then nothing.No logos are appeared. I tried to flash the default kernel from android gadgematics but i couldnt. The last time i did this i kept tapping the search button until it lights the blue led light on the turn on button, i tried to flash the file which is given on the site that i gave to you but it didnt happens anything. If you have any other questions write me to make it easier to help me for my problem. My phone has unlocked bootloader but it isnt root. After this can you give me some more information,like how to flash with the right way my phone or any other advices? I have the xperia play r800i 2.3.4 which i reported yesterday.
Click to expand...
Click to collapse
You need to flash your stock ROM on your device...
Download SE PC companion and install it:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Open Sony Ericsson PC Companion when it´s installed:
Choose Support Zone(Start/Begin)->updating the phone software: it will pop up a message phone not found. Search for blue marked: Repair phone. Click on it and follow instructions on how to do.
If you still dont get it, check:
http://www.youtube.com/watch?v=i6CMm...eature=related :good:
Please help
naren_viswa said:
You need to flash your stock ROM on your device...
Download SE PC companion and install it:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Open Sony Ericsson PC Companion when it´s installed:
Choose Support Zone(Start/Begin)->updating the phone software: it will pop up a message phone not found. Search for blue marked: Repair phone. Click on it and follow instructions on how to do.
If you still dont get it, check:
http://www.youtube.com/watch?v=i6CMm...eature=related :good:
Click to expand...
Click to collapse
I have tried to repair my phone with pc companion but it didnt work. Now for the video on youtube it doesnt exist anymore
Hello,
I've been using my HTC Sensation for more than a year, but since monday I can't get it to work.
When I turn it on, a grey screen appears instantly and I can't do anything on the phone (see picture)
I was using CM 10.1 rom for a long time without any problem
Is that a software issue or a hardware issue ? I'm scared my phone had died...
can you enter recovery? "hold down power plus volume down" at the same time
I've tried many times but no, I can't enter recovery...
Maxioum said:
I've tried many times but no, I can't enter recovery...
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1239238
rzr86 said:
try this
http://forum.xda-developers.com/showthread.php?t=1239238
Click to expand...
Click to collapse
I tried this but it didnt change anything...
The screen is instantly grey when I start the phone and I cant enter recovery
Please, I really need your help because I need to know very fast if I have to buy a new phone...!
Maxioum said:
Please, I really need your help because I need to know very fast if I have to buy a new phone...!
Click to expand...
Click to collapse
Does it show the bootloader?
If not then probably it could be a hardware issue
Probably your digitizer is faulty
Sent from my HTC Sensation Z710e using xda premium
No bootloader... I absolutely have no screen and image
After I went to a repair store, they told me that the screen is broken.
They ask me 120€ (160$) to change it. Is it possible to buy a screen on internet and change it by myself ? (knowing that I never repaired a phone before and have absolutely no knowledge in doing it)
Can anybody answer me please ?...
up !
Hi everyone, i am new to xda. Ive soft bricked my lenovo a800 by manually installing fonts and after reboot, soft bricked my phone. I have stock recovery with usb debugging disabled accidently. My pc is detecting my phone but cannot access it. Ive wanted to flash it to stock rom and flash tool is not detecting it. Does anyone has any solution to my worst problem ? please help cause i dont want to give away 500 to 700 bucks for a service center. Help me
prajwal999 said:
Hi everyone, i am new to xda. Ive soft bricked my lenovo a800 by manually installing fonts and after reboot, soft bricked my phone. I have stock recovery with usb debugging disabled accidently. My pc is detecting my phone but cannot access it. Ive wanted to flash it to stock rom and flash tool is not detecting it. Does anyone has any solution to my worst problem ? please help cause i dont want to give away 500 to 700 bucks for a service center. Help me
Click to expand...
Click to collapse
Are you able to use the power button to "kind of" reboot? (like, it doesn't actually start up, but it still responds to the power button)
yes
thenookieforlife3 said:
Are you able to use the power button to "kind of" reboot? (like, it doesn't actually start up, but it still responds to the power button)
Click to expand...
Click to collapse
Thanks for replying. It boots and get stuck at lenovo loading screen. I dont even have nandroid backup.
prajwal999 said:
Thanks for replying. It boots and get stuck at lenovo loading screen. I dont even have nandroid backup.
Click to expand...
Click to collapse
So it does respond to the power button, even if it doesn't actually boot up?
thenookieforlife3 said:
So it does respond to the power button, even if it doesn't actually boot up?
Click to expand...
Click to collapse
Yes it is soft bricked
but
prajwal999 said:
Yes it is soft bricked
Click to expand...
Click to collapse
I still can go to stock recovery and yet makes no sense
prajwal999 said:
I still can go to stock recovery and yet makes no sense
Click to expand...
Click to collapse
Why does it make no sense? I was going to recommend using ClockworkMod, but...
thenookieforlife3 said:
Why does it make no sense? I was going to recommend using ClockworkMod, but...
Click to expand...
Click to collapse
I could have done it with cmw but i have stock recovery and it is of no use...
prajwal999 said:
I could have done it with cmw but i have stock recovery and it is of no use...
Click to expand...
Click to collapse
I need you to please speak with a little more enunciation. I am not really understanding what you are trying to say.
What have you done so far, and what has not been successful?
thenookieforlife3 said:
I need you to please speak with a little more enunciation. I am not really understanding what you are trying to say.
What have you done so far, and what has not been successful?
Click to expand...
Click to collapse
What ? Let me put this way. My phone has stock recovery, usb debugging disabled, boot looping, windows cant read my android and i dont have nandroid backup and i have stock rom...
prajwal999 said:
What ? Let me put this way. My phone has stock recovery, usb debugging disabled, boot looping, windows cant read my android and i dont have nandroid backup and i have stock rom...
Click to expand...
Click to collapse
Yo! Whats your age ? And which grade or class are you studying in ?
prajwal999 said:
Yo! Whats your age ? And which grade or class are you studying in ?
Click to expand...
Click to collapse
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
tried that!
thenookieforlife3 said:
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
Click to expand...
Click to collapse
I've tried that several times. But there is a problem in my rom. Any ideas?
thenookieforlife3 said:
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
Click to expand...
Click to collapse
Any ideas? I want my phone back. Please!!
help me!!
Does anyone have fix for my phone
guys please help my my Lenovo A800 after 10 seconds it wel close again stock at Lenovo logo ,I can't even use factory mode,after 10 seconds it will close to,no choose directory,no choose clearing data or normal boot,nothing,only when I press Power and volume up,You are in factory mode press power button and the normal boot,and it will close,are this problem can be fix?
Hi,
I Flashed my Huawei Y210-100 Firmware a couple of days ago to add Farsi language to massaging keyboard. I was done installing firmware on SD card and updated it from menu. after the updating operation was done the phone restarted, but LCD lost it's light and I can't see anything. Please help me fix the problem.
Your quick response will be appreciated
Sincerely Yours,
A user from Iran
esi_427 said:
Hi,
I Flashed my Huawei Y210-100 Firmware a couple of days ago to add Farsi language to massaging keyboard. I was done installing firmware on SD card and updated it from menu. after the updating operation was done the phone restarted, but LCD lost it's light and I can't see anything. Please help me fix the problem.
Your quick response will be appreciated
Sincerely Yours,
A user from Iran
Click to expand...
Click to collapse
Maybe you messed up the bootanimation in the process :|
Mr.WoW said:
Maybe you messed up the bootanimation in the process :|
Click to expand...
Click to collapse
Thank you for your reply. I don't think so I messed up bootamination process because it's done completely. the phone lost it's light after restart. so what can I do Now? please help me if have a solution
esi_427 said:
Thank you for your reply. I don't think so I messed up bootamination process because it's done completely. the phone lost it's light after restart. so what can I do Now? please help me if have a solution
Click to expand...
Click to collapse
when you turn on the device ..
does it show the huawei logo then nothing happens ?
Mr.WoW said:
when you turn on the device ..
does it show the huawei logo then nothing happens ?
Click to expand...
Click to collapse
Thanks for your comments.No Mr.WoW. It doesn't show anything. but I can volume up and down and even answer a call by dragging on the screen.
I read somewhere I should increase the light of screen by going to it's setting in menu but I can find it in the dark. or I should increase it's light by attaching LCD to another same device but I don't find a same device. even that solution was not useful for other users.
is it a hardware problem? I mean maybe one of it's IC's has been damaged or something like that.
esi_427 said:
Thanks for your comments.No Mr.WoW. It doesn't show anything. but I can volume up and down and even answer a call by dragging on the screen.
I read somewhere I should increase the light of screen by going to it's setting in menu but I can find it in the dark. or I should increase it's light by attaching LCD to another same device but I don't find a same device. even that solution was not useful for other users.
is it a hardware problem? I mean maybe one of it's IC's has been damaged or something like that.
Click to expand...
Click to collapse
try flashing another firmware , if the problem still exists .. then Its propably a hardware problem :/
Mr.WoW said:
try flashing another firmware , if the problem still exists .. then Its propably a hardware problem :/
Click to expand...
Click to collapse
I want to do that but the problem is how Can I try another firmware when I can not see anything. Can I flash it via USB? plz help me