Related
Has anyone been able to successfully connect to 802.11n? I have a Cisco Linksys E3000 Advanced Dual-Band Wireless-N Router and my laptop connects to N without issue. My G2x has no issue finding my G band and connecting to it, but the N isn't even detected. I'm not filtering by MAC address and the N band has plenty of ip's available in the DHCP pool. Additionally, Other devices can connect to the N band without issue. I saw someone had mentioned something about wireless N previously, but I can't find the post anymore.
Izzydroolin said:
Has anyone been able to successfully connect to 802.11n? I have a Cisco Linksys E2500 Advanced Dual-Band Wireless-N Router and my laptop connects to N without issue. My G2x has no issue finding my G band and connecting to it, but the N isn't even detected. I'm not filtering by MAC address and the N band has plenty of ip's available in the DHCP pool. Additionally, Other devices can connect to the N band without issue. I saw someone had mentioned something about wireless N previously, but I can't find the post anymore.
Click to expand...
Click to collapse
I am the one having this issue also, but mine is with my dual band Time Capsule..Is there a setting somewhere how to activate the N on our phones?????
bueller? I'm just Curious. Seems we both are using Dual band routers. Anyone running strait 802.11n at home or the office?
Mine only saw my G band, not the N on my dual-band Linksys.
Izzydroolin said:
bueller? I'm just Curious. Seems we both are using Dual band routers. Anyone running strait 802.11n at home or the office?
Click to expand...
Click to collapse
i am and its connected and blazing fast good luck guys belkin
I just double checked a few spec sheets, just to make sure, but this is what they all say...
Connectivity
Bluetooth:Yes
Wi-Fi: Yes (802.11b, 802.11g, 802.11n)
So I'm fairly certain I'm not all hopped up on crazy pills like Mugatu. Is it possible this feature is disabled like the FM radio?
working here - dlink dir655 connected over N.
Wireless N works perfect here, using, umm, no idea what router my office uses
I'm able to connect to wireless n router also a dlink.
Sent from my LG-P999 using XDA App
nope its not picking up my wireless N band on my dual router (vizio), I think its more a froyo thing than anything
my mytouch wouldnt pick it up either, until I ran 2.3.3
Mine won't connect when I set my wifi (asus rt-n12 w/ dd-wrt) to wireless-n only. My nexus one had no problems with this.
I have a Netgear WNR3500L and set to 300Mbps.
Phone can only connect up to 72Mbps.
Izzydroolin said:
Has anyone been able to successfully connect to 802.11n? I have a Cisco Linksys E3000 Advanced Dual-Band Wireless-N Router and my laptop connects to N without issue. My G2x has no issue finding my G band and connecting to it, but the N isn't even detected. I'm not filtering by MAC address and the N band has plenty of ip's available in the DHCP pool. Additionally, Other devices can connect to the N band without issue. I saw someone had mentioned something about wireless N previously, but I can't find the post anymore.
Click to expand...
Click to collapse
I have a Cisco/Linksys WRT400N and all the phones (Nexus One-Super AOSP 2.3.3, G2-CM7 Nightly #40 2.3.3 and G2X Rooted Froyo 2.2.2) connect fine. Only when I was changing kernels or something did I ever have an issue.
N1M1TZ said:
I have a Netgear WNR3500L and set to 300Mbps.
Phone can only connect up to 72Mbps.
Click to expand...
Click to collapse
At most our phones can theoreticaly connect at 150 mbps, to do more than that you have to have dual band antenas inside of the phone which I don't know if there are any phones that even do that.
The phone does only 2.4 ghz N not 5 ghz N so check your routers to see what bands its using. Also 5 ghz N can go up to 300 mbps and 2.4 ghz N only goes up to 120 i believe.
Sent from my HTC Vision using XDA Premium App
@david: 2.4 =
150
Sent from my LG-P990 using Tapatalk
It definitely supports N. I have a dual band router and my 2.4ghz radio was running 802.11G/802.11N and my G2X in Speedtest would hit 30mbps down and 20mbps up.
With JUST 802.11G the G2X maxes at 15mbps down and 10mbps up.
I've left the radio on 802.11G since it for some reason seems to take less battery and 15mbps is good enough for me right now
I'm connecting to my DIR 655 with no problems. What is everyone using to see what speed it's connecting at and whether it's connecting through B,G or N. I am showing a link speed of 65 mbps under network settings.
Linksys Dual Band N Router
Hmmm, I was looking up a problem I am having connecting to my Linksys Wireless N router and found this thread.
I am having the same issue... Can't connect at home over N, but connect at work over G with no issues.
Also I called TMobile a few days ago (had to return my original phone for another problem), but when we were trying to troubleshoot and I mentioned I had problems connecting at home, he asked if I had a Linksys wireless N router. I didn't think about it at the time until I saw this...
UPDATE:
Nothing I tried in these forums worked for me but I tell you what did. Using my old D-Link b, g router. Set this up and connected in no time, no disconnecting, no issues.
Working For me - fix is here
I had the same problem.
It wont show 5ghz / n by default.
First goto settings>wifi settings screen . click on menu and click advanced settings > Uncheck the wifi optimization.
And then scan networks. you should be able to find your n network.
Hi, most reviews I've read online says it has 5ghz wifi, but I can't connect to my router via 5ghz wifi. The online manual downloaded from samsung Canada's website also says there is 5ghz (on pg. 101). My note 10.1 can't even see 5ghz wifi ssid. I know that my 5ghz wifi is working good because both my Acer laptop and LG O4X can connect to the 5ghz wifi. Is 5ghz wifi only available on certain models? I have GT-N8010 32gb wifi only model from Canada.
Yes all models have 5ghz not tested it though may be some issues with the settings
FWIW, I can see my 5GHz 802.11n router at home, but sometimes the detection is sporadic.
I can't see 5ghz wifi at all on my note 10.1. I even tried setting it up manually and it just says not in range. Is there some setting on my note 10.1 to turn on 5ghz wifi or is it broken?
5ghz is a relatively new technology I do not see there being any specific setting for that like I said never used but to there are couple of things you can try switch only 5ghz band on ur router and try setting it up close to the router and the band has one draw back and that is the range of signals.
Can you connect any other device on 5ghz and have to tried to connect it to another router with 5ghz bandwidth
5 GHZ Wifi
I am using 5GHz Wifi on my Note 10.1.....
i have an ac66r and have no problems connecting. the range sucks though. it also doesnt give me the extra speed boost i see on my laptop. the laptop only has n150.
My router is working fine. I'm able to connect to 5 ghz wifi with my laptop and my LG Optimus 4x. The signal is strong on both. I tried putting my note 10.1 without any case beside the router and still no 5 ghz wifi. I can connect to 2.4 ghz wifi fine. Any ideas on how to fix it?
Xcalibur007 said:
Any ideas on how to fix it?
Click to expand...
Click to collapse
Try changing the channel the router is using. Have you flashed firmware from a different region? Because some countries use different wifi channels than others.
I'm on stock rom, not rooted and haven't flashed with any other rom. It looks like that my 5ghz wifi is on channel 149. What 5ghz wifi channels can the note 10.1 use?
According to http://en.m.wikipedia.org/wiki/List_of_WLAN_channels that channels should be fine. Must be some other problem then.
Xcalibur007 said:
I'm on stock rom, not rooted and haven't flashed with any other rom. It looks like that my 5ghz wifi is on channel 149. What 5ghz wifi channels can the note 10.1 use?
Click to expand...
Click to collapse
I live in the USA and have a GT-N8013. The 5GHz wi-fi worked day 1, right out the box. I didn't have to do any special setup. Yesterday I upgraded to JB and it's still working fine.
My router's 5GHz access point is set to use WPA2-PSK [AES] with channel 153. I changed to that channel based on a recommendation from the Wi-fi Analyzer app. It wasn't necessary to change the default channel used by my router in order for the Note to see the AP or connect.
Maybe your Note is defective?
Is there a test to determine if it's a hardware issue? My 2.4 ghz wifi works fine. Are the 2.4 and 5 ghz wifi on separate wifi cards?
samir_a said:
5ghz is a relatively new technology
Click to expand...
Click to collapse
It actually predates 2.4GHz WiFi.
i use channels 44 + 48. decided on these when my GS2 failed to find the higher channels.
so it is probably limited like the phones to use the more common ranges.
Xcalibur007 said:
Is there a test to determine if it's a hardware issue?
Click to expand...
Click to collapse
Find some one with another 5ghz wifi network and if your note see it then the problem is your router. If it doesn't see it either then try a factory reset. Ultimately return for warranty.
kcrudup said:
It actually predates 2.4GHz WiFi.
Click to expand...
Click to collapse
Ya 802.11a was 5ghz.
5Ghz
At my duaghters school she can only see/connect to the 5.0Ghz wifi in the lower bands/channels. I raised this with Samsung and their official response was that 5Ghz was not supported. See below. Its obviously not as absolute as thier statement as we are connect to some 5Ghz wifi routers - has anyone found the same.
From: voc samsung [mailto:[email protected]]
Sent: 12 February 2013 12:15 PM
To: Richard Banks
Subject: WiFi Frequency Band Enquiry - Galaxy Note Tab 10.1 (GT-N8010)
Dear Richard,
Thank you for contacting Samsung Customer Care.
I have followed up on your enquiry and have found that the Galaxy Tab Note 10.1 (GT-N8010) does not support 5Ghz WiFi Frequency band.
I apologise for any inconvenience.
Thank you for contacting Samsung Customer Care.
Kind Regards,
Stephanie
Samsung Mobile Support
Phone: 1300 362 603
Email: [email protected]
gnote 8013
As long as i know, only the 8013 model can use 5 gz... as i read in Htcmania, a site from Spain.
"Modelo GT-N8013, es solo WIFI pero opera en dos bandas las de 2´4 Ghz (España, China...) y las de 5 Ghz (paises de países Arabe´s, de EE.UU...)"
Translate: model gt 8013 only wifi but operates in two ranges: 2.4 gz ( Spain, China, etc) and 5 gz ( for arabs countries Usa, etc.)
My Note 10.1 has actually done better on my 5Ghz network. On the 2.4Ghz network I was getting weird disconnects, inability to route traffic even though it showed connected, etc. Now that I'm on the 5Ghz side, I have not had a single problem in about 3-4 weeks.
[deleted]
I was attempting a file transfer between my NAS and Phone today, but realised that despite the Nexus 5 supposedly supporting 20/40mhz bands on wireless N, I was instead negotiating with my AP at only 72mbps.
I have a Asus RT-N16 router running Tomato USB and my other devices can connect at 300mbps fine, but there is something about my Nexus that won't. Even though I think its suppose too.
Now this is separate to 802.11AC, my router doesn't support this and AFAIK it may work fine compared to 802.11n.
So my question is, has anyone else managed to get 300mbps N link speeds on their device when using a 802.11n network spec @ 40mhz?
Seems for some reason my device is telling the AP that it supports single band 20mhz only and is defaulting to this low connection link.
I have tried different WiFi tweaks, switching too and from mobile data modes after some research on here and none of it helps, still stuck at 72mbps.
Hi..
Bought a new Z3 dual, it was connecting fine to my 5 ghz wifi.
Suddenly, phone is no longer seeing any 5ghz wifi and can only see and connect to 2.4 ghz.
Have contacted Sony support and they advised to do system repair which I did successfully.
After repair, phone detected 5ghz wifi, but just before I connect, it again dissappeared and now phone only sees 2.4
My other phones are normally connected to 5ghz, so seems not to be router problem.
I have also tried to change wifi channel, band and even security but no change.
Appreciate if anyone can help Pls.
My Sim card connects to LTE
Carrier Ooredoo Qatar
Thnxxx
Sent from my D6633 using XDA Free mobile app
cooltoka said:
Hi..
Bought a new Z3 dual, it was connecting fine to my 5 ghz wifi.
Suddenly, phone is no longer seeing any 5ghz wifi and can only see and connect to 2.4 ghz.
Have contacted Sony support and they advised to do system repair which I did successfully.
After repair, phone detected 5ghz wifi, but just before I connect, it again dissappeared and now phone only sees 2.4
My other phones are normally connected to 5ghz, so seems not to be router problem.
I have also tried to change wifi channel, band and even security but no change.
Appreciate if anyone can help Pls.
My Sim card connects to LTE
Carrier Ooredoo Qatar
Thnxxx
Sent from my D6633 using XDA Free mobile app
Click to expand...
Click to collapse
It IS a router problem. Select your region in your router's 5GHz wifi settings, it should solve your problem as it's a common issue among dual band wifi phones.
Thanks, I will try to change router setup
But, Since other phones are working fine with 5 Ghz wifi, I don't think it's a router issue.
I have Already tried changing channels, band, security and nothing changes.
Sent from my D6633 using XDA Free mobile app
cooltoka said:
Thanks, I will try to change router setup
But, Since other phones are working fine with 5 Ghz wifi, I don't think it's a router issue.
I have Already tried changing channels, band, security and nothing changes.
Sent from my D6633 using XDA Free mobile app
Click to expand...
Click to collapse
Buddy, trust me it's a REGION setting problem. I had the same issue with my Z3. All my other devices detected the 5GHz wifi fine. It's not a channel, band or security issue, but a REGION one. My router had the region set as "United States," but as soon as I set it to my country, my phone detected the 5GHz signal and connected without problems. If your phone model was bought locally and is of your region (MEA - Middle east and Asia) set the region setting on your router to your country (Qatar). If you've flashed another region's firmware on your phone, try setting the region on your router to that region and see if it works.
Tell me the brand name and model of your router if you need additional help.
Thanks a lot for ur concern, I really appreciate.
My router is linksys EA2700
I connect to it using smart wifi linksys app.
I changed channel to auto and region to +3 gmt
My Iphone connects normally to 5ghz, while z3 cannot see even surrounding neighbours wifi 5ghz
I did a repair using pc companion and I was not prompt to select a region, i guess it shd be as per sim card.
Today I called Ooredoo and technical support shd call me tomorrow hopefully.
Thanks again for ur time
Sent from my D6633 using XDA Free mobile app
Set your router to a US band if bought from the US 36-48 or 149-165, or to whichever region you bought it from. If it still fails then its the phone's WiFi chip.
Bands 36,40,44,48 are generally supported in all regions except Taiwan. So if its an inter-region issue use one of those.
https://en.wikipedia.org/wiki/List_of_WLAN_channels
cooltoka said:
Thanks a lot for ur concern, I really appreciate.
My router is linksys EA2700
I connect to it using smart wifi linksys app.
I changed channel to auto and region to +3 gmt
My Iphone connects normally to 5ghz, while z3 cannot see even surrounding neighbours wifi 5ghz
I did a repair using pc companion and I was not prompt to select a region, i guess it shd be as per sim card.
Today I called Ooredoo and technical support shd call me tomorrow hopefully.
Thanks again for ur time
Sent from my D6633 using XDA Free mobile app
Click to expand...
Click to collapse
Try updating your router's firmware: http://www.linksys.com/us/support-article?articleNum=142413
And reboot.
Also, Change is SSID of the 5ghz to something different.
Hi I got realme 5 pro 8gb variant 2 days ago as per specs it supports dual-band wifi 5ghz but it is not detecting my 5ghz wifi from the router. can someone please help me with this?
I tried to change the channel but in vain. That 5ghz wifi is shown on my laptop but not on phone.
Almost the same happens with my Realme Q. When I share hotspot on 2.4 GHz every device detects it and is able to connect. When I share 5 GHz mobile devices won't see it neither does my old Desktop PC that has wifi adapter.
greenys' said:
Almost the same happens with my Realme Q. When I share hotspot on 2.4 GHz every device detects it and is able to connect. When I share 5 GHz mobile devices won't see it neither does my old Desktop PC that has wifi adapter.
Click to expand...
Click to collapse
Yeah its really sad for me because i got a new 5Ghz Router then i thought my internet will be stable as there are many 2.4Ghz wifi devices in my neighborhood so i decided to move to dual-band to get rid of disconnections and unstable speed
bunny789 said:
Yeah its really sad for me because i got a new 5Ghz Router then i thought my internet will be stable as there are many 2.4Ghz wifi devices in my neighborhood so i decided to move to dual-band to get rid of disconnections and unstable speed
Click to expand...
Click to collapse
I think the issue has something to do with antenna of the device and which bands does it support. Perhaps? I'm sure they use different bands in china and different lte/4g/wifi technologies there than someplace else, other countries in the world.
Hello All,
I have Realme X2 Pro. I can connect to my 5GHz home wifi. But I am not able to create a 5GHz hotspot from the phone ....very frustrating.
I got a realme 5 pro 8gb and it its detecting my 5ghz wifi
Check and try change your Channel WIFI 5G and Setting Region...some region can accesss Limit Channel WIFI...I have same Problem but now Detect after Change my Channel WIFI 5G.
my R5Pro have the same problem, but when i change settings channel at my dlink router, the problem is solved. I change to chanel 149.