Database Info

HELP!! No Android Recovery option

Hey Everyone,
Im new to android, and having a small issue, I am attempting to root my wifi xoom, I get up to the part where its time to select android recovery so that I can select the root zip, however when I use the volume down key to scroll the options the only 3 available are NVflash, RSD and Fastboot, theres no android recovery option I have searched the forums and googled it, but I seem to be the only one with this issue, my xoom is running 3.1 and bought in Aus, dont know if this makes a difference? any help would be greatly appreciated, I have got an OTG cable and would like to mount my external HDD so I need to get it rooted. Should probably mention I have unlocked it too.
Cheers

ha i just posted a thread with exactly the same issue. Hopefully one of us will get an answer!

djleez82 said:
ha i just posted a thread with exactly the same issue. Hopefully one of us will get an answer!
Click to expand...
Click to collapse
Your post was already answered in the General section. No need to post twice.

The answer did not fix my problem however. Still stuck at the same place as before just like terreboo. Possibly theres an issue with this type of xoom? I bought mine in australia as well. According to my about tablet info it says this:
Firmware Configuration Version: GAS_ASIA_UCAHUBLWFRTIRD_P006 so im assuming this is an asian tab? Just wondering terreboo what does yours say under firmware configuration?

yeah sorry didnt mean to post it in the general section, I alerted it to the mods to delete they just havent got around to it yet, yeah mate I have the same version as you, although I doubt this is the reason, we cant be the only two in Aus trying to root them? I think the problem probably lies else where, it has been suggested I'm getting the timing wrong, so I'll try again and post back my progress or lack of.
---------- Post added at 10:01 PM ---------- Previous post was at 09:45 PM ----------
I have tried it 10+ times now, I'm confident its not the timing of pressing the down key on reboot having varied the length of time everytime I tried, possibly its because of the firmware version? Im at a loss, I have followed the instructions of the root guide to the letter and seem to be one of the only ones with this problem!
this is the guide im using
http://forum.xda-developers.com/showthread.php?t=1078019

Same problem here!
I have the same problem guys.. Any solution?? The developers some help??
Im using the same guide btw....
I've freaked out im trying this for 8 hours now and no results....

im having a similar problem that my factory reset is corrupt or something because it doesnt actually DO anything.

I did the long root method as opposed to the supposedly easier method and thank heavens I got through it unharmed. I was ****ting my pants the whole way through. I wish I were more savvy with this so I can offer help. If I were u guys I would PM the devs from TIAMAT. They are probably the most knowledgeable ppl here to ask.

solution
OK guys i have a solution a guy from #xoom channel told me to write in windows command line
abd recovery reboot
And it worked!
I'm currently posting this from my costum rommed xoom

DrGreem said:
OK guys i have a solution a guy from #xoom channel told me to write in windows command line
abd recovery reboot
And it worked!
I'm currently posting this from my costum rommed xoom
Click to expand...
Click to collapse
Would that be adb recovery reboot? Can you give more information?

assuming you have adb setup on your computer already. Plug your xoom into your comp and make sure its in debug mode. Settings-applications-development. Open a command prompt and type in "adb reboot recovery" without quotes. Your device will then reboot into recovery mode.
I will say I'm having the same issue. I flash the new recovery and I don't see it in the menu. I'm running a US wifi xoom.

okantomi said:
Would that be adb recovery reboot? Can you give more information?
Click to expand...
Click to collapse
Yes that's right. I followed the guide and i waited 3 seconds but i never had the option 'android recovery so i turned on the device and this guy told me to run this command from cmd.
So after that xoom rebooted into clockwork recovery state and i flashed thecostum rom.

According to the guide that were using, if you allow the xoom to boot fully into honeycomb it reinstalls the stock recovery, and you need to redo the process all over. Also, you need to be in honeycomb to use the ADB command, if your in fastboot it won't detect the xoom. This did not work for me. Anyone else try it?

no luck for me here either. I can flash recovery successfully (according to the prompt) no problems there. I just have the exact same trouble booting into it as above.
Vol Down key combo doesn't work and if you leave the OS to boot straight after install, CWM is replaced by stock recovery. No fun at all.
Any further news or suggestions on this?

autodc5 said:
im having a similar problem that my factory reset is corrupt or something because it doesnt actually DO anything.
Click to expand...
Click to collapse
Same as my Xoom, opened a thread just for it, but no one can help

much easier... download rom manager and click boot to recovery haha ...
If not rooted,
adb reboot recovery via a cmdline window works a treat _

fkofilee said:
much easier... download rom manager and click boot to recovery haha ...
If not rooted,
adb reboot recovery via a cmdline window works a treat _
Click to expand...
Click to collapse
Just make sure that Rom Manager doesn't trick you into flashing a non-compatible updated recovery version.
In my experience it doesn't play well with the Xoom.
If all you want is a non manual way to boot into recovery from the OS, download Quick Boot (if rooted) or if you're already on the Tiamat Moray Rom, it's something you can choose when you press the power button on the back.

the problem is that for me and others with this issue, you can't use adb to boot recovery. If you install recovery from fastboot then boot into the regular OS without booting to recovery and rooting, the OS replaces CWM with the stock recovery. This means if you use adb or another app to reboot into recovery, you just get stock recovery which is totally useless. I can't load recovery or root using anay of the universal methods I have come accross. We need a way to boot into recovery without having it replaced with stock or another rooting method or something. Any other ideas?

aussiechris said:
the problem is that for me and others with this issue, you can't use adb to boot recovery. If you install recovery from fastboot then boot into the regular OS without booting to recovery and rooting, the OS replaces CWM with the stock recovery. This means if you use adb or another app to reboot into recovery, you just get stock recovery which is totally useless. I can't load recovery or root using anay of the universal methods I have come accross. We need a way to boot into recovery without having it replaced with stock or another rooting method or something. Any other ideas?
Click to expand...
Click to collapse
Look, this is how I had to flash CWM image file- through adb,/fastboot just like you. No matter what you say, it comes down to a question of timing.

I'm not sure about everyone else with the no recovery option, but timing just isnt the issue for me. Without a lie i've tried to enter recovery over 50 times at various points, 95% of those attempts were at the 3 second mark that is stated in the xda guide we've been using. I'm aware of one other person here whos tried it MUCH more than me with exactly the same result.
However theres one thing that we could narrow it down with. Thus far the people having this issue are using the asian firmware xoom's. Could everyone else having this problem on this thread say whether or not theyre using the asian firmware too? Maybe the asian firmware can't be rooted this way?

HTC usb driver problem

Hi there
I just got a new laptop running Window 8.1
I want to flash the latest TWRP to able to flash android 4.4 kitkat. But after i install "htc sync manager" and "htc sync", still dont have usb-driver on fastboot mode. So i cant flash the TWRP recovery.
Can any1 help me step by step how to get the fastboot-usb to install the TWRP on Window8?
My phone got everything already, just need the usb-driver, so in the fastboot can recognize the usb, so that i can flash latest TWRP.
(My phone running TWRP 2.3.3.0 already)
(My new laptop had Android-sdk already)
Thank for helping me guys :good:

Have you searched for a solution? I've seen a few threads discussing this problem.
Sent from my Evita.

timmaaa said:
Have you searched for a solution? I've seen a few threads discussing this problem.
Sent from my Evita.
Click to expand...
Click to collapse
i did, but not step by step, i quite noob, thats why i am asking man :crying:
If you found any thread that have a detail and step by step, please let me know

There are threads that detail it step by step but you need to find them.
Sent from my Evita.

lol, if i can do that, i am not spending my time to create this thread.
Any1 else please???

Surely you can use the XDA search feature and/or Google?
Sent from my Evita.

timmaaa said:
Surely you can use the XDA search feature and/or Google?
Sent from my Evita.
Click to expand...
Click to collapse
actually, i did that already, but after that, still nothing change. Even reinstall htc sync manager, but still when i reboot the phone to bootloader and go to fastboot, usb still not working. I dont know why, like i said, i am quite noob, thats why i am asking for some help if any1 know my problem.
Anyway, thanks alot for your help man, very appreciate but the problem still here
PS: another thing is my laptop using AMD cpu, and all of solution is just for intel-usb @[email protected] i cant follow someway, such as this:
http://forum.xda-developers.com/showthread.php?t=2347317&page=4

Unfortunately I don't run Windows 8 so I don't have any personal experience with getting it to work. The best solution I've seen people talk about is to use a different version of Windows.
Sent from my Evita.

Run a Linux live cd and use fastboot that way.
Sent from my iPhone using Tapatalk

There is no signed Windows 8.1 Android driver.
To make it work there is several hoops to jump through. Really its easier to just boot into Linux or use another computer.
Eg my Desktop runs Windows 8.1 but my laptop has Windows 7, so I use the laptop for fastboot.

thinhletien said:
Hi there
I just got a new laptop running Window 8.1
I want to flash the latest TWRP to able to flash android 4.4 kitkat. But after i install "htc sync manager" and "htc sync", still dont have usb-driver on fastboot mode. So i cant flash the TWRP recovery.
Can any1 help me step by step how to get the fastboot-usb to install the TWRP on Window8?
My phone got everything already, just need the usb-driver, so in the fastboot can recognize the usb, so that i can flash latest TWRP.
(My phone running TWRP 2.3.3.0 already)
(My new laptop had Android-sdk already)
Thank for helping me guys :good:
Click to expand...
Click to collapse
windows 8.1 wont recognize my htc one x with ICS rom. however when i updated to jellybean 4.1.1 and connected to the windows 8.1, it installed all the required drivers itself and now I am able to connect the phone/fastboot etc. I tried installing HTC Sync previously but that doesnt help cuz while the installation process the Htc Driver Installer fails to install.

[Q] Bricked or not ? HELPPP PLEASE !

To try cut a very long short I have a Nexus5 that I am now unable to boot. I had used the Skipsoft unified Android toolkit a few months ago to both unlock the bootloader and root the device. I backed up my original OS to my PC. Now last few days I have been unable to access the play store UNLESS on wifi so after trying a new sim card with no success I thought I would use the toolkit to lock the bootloader and unroot the device so I could install the latest 4.4.3 system update(which had already downloaded to the phone), at this point the toolkit chucked up a few errors (DOH..did not write them down, what a thick head). OK so update had downloaded and phone restarts but goes straight into TWRP which now asks for a password WTF ? so then I turn off the phone and back on and all I now have is the google logo spinning and nothing else. It even seems adb does not work is there ANYONE WHO CAN ASSIST ME PLEASE... FEEL LIKE CRYING RIGHT NOW..

Don't use a tool kit. Use this. If you still have problems post what errors you're getting here.
http://forum.xda-developers.com/showthread.php?p=47156064
Edit, Google 15 second adb drivers xda. That'll setup fastboot/adb which you'll need. Just follow method one in the link I posted. Backup what you can before preceding off your device as it will
be wiped
Sent from my Nexus 5 using XDA Free mobile app

Not bricked - fixed
OK... So managed to format the system then gain access to the new ADB sideload feature to allow me to sideload a new ROM. Thank you to all who read A hope this helps someone..

Relocking the bootloader for an OTA is unnecessary just FYI.
That's probably the reason why Twrp asked for a pass. It's generally good (required) to let the system full boot without any mods when factory restoring.
Sent from my Nexus 7 using Tapatalk

Huawei G750-U10 (honor 3x) Kitkat 4.4.2

A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Vcom drivers
https://mega.co.nz/#!B0IwlIJY!yZgoPULm7XV9klgmdFB_A6zymqCq9u0Z_z3sJEkQjgc
MKT Droid Tool
http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip
B113 4.2.2 base with unlocked bootloader
https://drive.google.com/file/d/0Byj7mTAqkRdwUVd4ZDdiYTBUQjA/edit
Root Genius to root your device
http://www.shuame.com/en/root/
Gaaps to flash immediately after you flash Kitkat rom
https://mega.co.nz/#!F9QhHYRS!ZfP5w9SdbWUcyptA8_hlfPReeK0gWxQsnC95ASmMRrY
G750-T00 kitkat base
https://drive.google.com/open?id=0B3kPp0_1ym9ceGJ0NThKbFVoMzA
Rooted with twrp recovery inbuild base rom
https://drive.google.com/file/d/0Byj7mTAqkRdwcDRJSEdJb244M0U/view
Here we go.
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience

there after you can flash any custom roms available on chinese site for T20

Hi @jacktackle, good day!
First of all, excuse me for asking noob questions. I'm new here and I really have limited knowledge about smartphones.
I just wanna ask if this would work on my phone? Will my phone be completely rooted? Because I tried several rooting softwares, and everytime I restart my phone I always lose my root access.
Again, sorry for my noob questions. I would really appreciate your help!
Sent from my HUAWEI G750-T01 using XDA Free mobile app

jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Click to expand...
Click to collapse
Give credit to the actual people who had done the work!
---------- Post added at 02:18 AM ---------- Previous post was at 02:05 AM ----------
spaceman0423 said:
Hi @jacktackle, good day!
First of all, excuse me for asking noob questions. I'm new here and I really have limited knowledge about smartphones.
I just wanna ask if this would work on my phone? Will my phone be completely rooted? Because I tried several rooting softwares, and everytime I restart my phone I always lose my root access.
Again, sorry for my noob questions. I would really appreciate your help!
View attachment 3180293
Sent from my HUAWEI G750-T01 using XDA Free mobile app
Click to expand...
Click to collapse
Last time I checked, there are no questions regarding full root, read: http://forum.xda-developers.com/showthread.php?t=2620608&highlight=t01&page=303

mtvtitan said:
Give credit to the actual people who had done the work!
---------- Post added at 02:18 AM ---------- Previous post was at 02:05 AM ----------
Last time I checked, there are no questions regarding full root, read: http://forum.xda-developers.com/showthread.php?t=2620608&highlight=t01&page=303
Click to expand...
Click to collapse
@mtvtitan, good day kababayan! I'm very sorry I really have limited knowledge about this stuff.
can you help me? a detailed tutorial would be a big help! Thanks!

this is been tested on only G750-U10
i do not know whether root genius works for other bases.
and yes, i found this guide on a russian site. translated with google and presented it on XDA for the people who are strugling to get to kitkat. plus many things arn't explained in the russian site whih i figured by myself.
so please respect we do free job here to help other's who are like us.

spaceman0423 said:
@mtvtitan, good day kababayan! I'm very sorry I really have limited knowledge about this stuff.
can you help me? a detailed tutorial would be a big help! Thanks!
Click to expand...
Click to collapse
Pare, you got to have sleepless nights to be a moderate flasher. search search search and search for answers. welcome to the XDA it's a ocean of knowledge. hope you will learn to swim.

U10 to T00
Hello Jacktackle,
Does this procedure works with stck B119?
Thank you in advance.

jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
[/SIZE][/FONT][/COLOR]
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience
Click to expand...
Click to collapse
Hello Jacktackle,
This procedure also works for stock B119?
Thank you in advance.

Thanks Jacktable. Just did it up to 8). Can you help wirth 9)?
I mean, Thanks Jacktacle.
Can you help with 9)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.

9 is flash tool. search for how to flash its there all over xda or google.
ok there you go guide attached. but do not fully rely on the guide. more focus on my instructions.

Works
Thanks.
I converted my phone from u10 to t00.
Running KitKat.

hy,
i have problems with flashing.
im trying and searching web for days now but i cant get out.
if i select download with flash tool everythink is ok, but if i plug in my phone nofing happens, and i installed the drivers i thionk cause i my phone is on the driver shows up in the device manager.
and when i plugin iin my phone( without battery) the progress bar doesnt change it even doesnt turn in red so pls help

Cant update with SP flash tool
I am now on b116 so I am trying to downgrade using the b113 scatter through SP flash tool. I installed all the VCOM drivers succesfully (I think its in my device manager) but when I download using SP flash tool this happens using the following steps.
1. I click download
2. I put my battery in.
3. Phone connects.
4. Sp flash tool says: Download DA 100% after that phone disconnects
5. Phone connects
6. Phone disconnects
7. SP flash tool error : S_Brom_Download_Da_fail (2004)
8. Phone boots up charching screen.
Can someone please help me fix this if possible?
I am on windows 8.1 and I installed Vcom drivers this way
Thanks in advance!

jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Vcom drivers
https://mega.co.nz/#!B0IwlIJY!yZgoPULm7XV9klgmdFB_A6zymqCq9u0Z_z3sJEkQjgc
MKT Droid Tool
http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip
B113 4.2.2 base with unlocked bootloader
https://drive.google.com/file/d/0Byj7mTAqkRdwUVd4ZDdiYTBUQjA/edit
Root Genius to root your device
http://www.shuame.com/en/root/
Gaaps to flash immediately after you flash Kitkat rom
https://mega.co.nz/#!F9QhHYRS!ZfP5w9SdbWUcyptA8_hlfPReeK0gWxQsnC95ASmMRrY
G750-T00 kitkat base
https://mega.co.nz/#!Nwpziara!9y1VitCix5Vx_6zwPtGpB6mTxlpHEAxIqUODCz4dl-s
Rooted with twrp recovery inbuild base rom
https://drive.google.com/file/d/0Byj7mTAqkRdwcDRJSEdJb244M0U/view
Here we go.
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience
Click to expand...
Click to collapse
Dear brother, does this update improves the sound quality? Have u noticed, any ideas?

Curious
Is there anyone did this?

venervitz1213 said:
Is there anyone did this?
Click to expand...
Click to collapse
Me :good:

G750-U10
can any one make a video of the full process please ...........i see that a lot of people needs it including me
thanxx

How did it go?
Did you face any difficulties or any observations? How is it working now?

rdrai said:
Me :good:
Click to expand...
Click to collapse
Is there are any bug that you get?

[Completed] [Q] HTC One X+ (AT&T) -TWRP issues/ ROM issues

First of all I did check other forums, etc. before coming here. I also spent countless hours researching the rooting process. Here is my problem:
I'm attempting to root an HTC One x+ (AT&T) that I purchased on amazon. I'm using a Windows 8.1 system, and The latest Windroid tool (v2.3). With the tool I was able to unlock bootloader. The next step (flash a recovery) is where I believe I made my mistake. For my phone there was 2 choices (global and AT&T). I hence learned that my phone is evitare-ul, so I should have used the AT&T version, but I flashed it with the Global TWRP. I also made some errors in that I somehow wiped out the stock ROM (still don't know how that happened). I posted a question in the HTC One x+ forum, and was answered by LLoir (Thank you). The response was:
"You need TWRP for the EVITAREUL and then use the sideload function to put a rom on, also you need to manually flash the boot.img in fastboot. There's no MTP for TWRP Evitareul hence the reason for sideload."
Being new to "rooting" I wasn't sure what Llior was saying, ergo all the research. OK, so I found the TWRP-evitare-ul, but it WON'T FLASH! (Via Windroid). Windroid says it worked, but there is no recovery installed. I am however able to flash and remove the "global TWRP". Lloir answer also referenced 'NO MTP for TWRP evitareul", so I assume it is indeed the global TRWP I had flashed (it does has MTP wish I can enable or disable). When "enabled" my windows computer sees my phone, when "disabled" it doesn't see anything connected. I Need Help in Finding a way to Flash the "TWRP - evitareul" onto my phone.
A related issue is that after each Flash attempt when I attempt to reboot The screen on my phone changes from the "bootloader" screen to the "htc" screen And nothing more. Windroid is waiting and waiting and waiting. I end up pressing the power and volume down button combo to get back to bootloader. With the "global TWRP" I can boot to recovery, but I am in limbo when I try to flash with the "TWRP evitareul". It never installs! I'm guessing I have a booting issue.
Based on various forum articles I believe I'm to get the "Boot.img" to flash when I exe the rom file? I really rather just have the "zip" version I can use with Windroid. I'll need guidance and help there.
As it stands right now I have unlocked bootloader and apparently have the wrong TWRP installed. I have issues with my phone being recognized by my computer, and at various times my computer states there is a problem with windroid (when phone connected via usb). Is using a windows 8.1 system an issue. I can go to my old XP
In summary I need:
1) Find a way to flash the correct TWRP into my HTC One x+
2)be able to flash a ROM (MagioRom).
3)Flash the boot/img.
Guidance and help is appreciated. At least point me in the right direction. This is why I posted here. Please excuse my ignorance. Thanks

dpsrams said:
First of all I did check other forums, etc. before coming here. I also spent countless hours researching the rooting process. Here is my problem:
I'm attempting to root an HTC One x+ (AT&T) that I purchased on amazon. I'm using a Windows 8.1 system, and The latest Windroid tool (v2.3). With the tool I was able to unlock bootloader. The next step (flash a recovery) is where I believe I made my mistake. For my phone there was 2 choices (global and AT&T). I hence learned that my phone is evitare-ul, so I should have used the AT&T version, but I flashed it with the Global TWRP. I also made some errors in that I somehow wiped out the stock ROM (still don't know how that happened). I posted a question in the HTC One x+ forum, and was answered by LLoir (Thank you). The response was:
"You need TWRP for the EVITAREUL and then use the sideload function to put a rom on, also you need to manually flash the boot.img in fastboot. There's no MTP for TWRP Evitareul hence the reason for sideload."
Being new to "rooting" I wasn't sure what Llior was saying, ergo all the research. OK, so I found the TWRP-evitare-ul, but it WON'T FLASH! (Via Windroid). Windroid says it worked, but there is no recovery installed. I am however able to flash and remove the "global TWRP". Lloir answer also referenced 'NO MTP for TWRP evitareul", so I assume it is indeed the global TRWP I had flashed (it does has MTP wish I can enable or disable). When "enabled" my windows computer sees my phone, when "disabled" it doesn't see anything connected. I Need Help in Finding a way to Flash the "TWRP - evitareul" onto my phone.
A related issue is that after each Flash attempt when I attempt to reboot The screen on my phone changes from the "bootloader" screen to the "htc" screen And nothing more. Windroid is waiting and waiting and waiting. I end up pressing the power and volume down button combo to get back to bootloader. With the "global TWRP" I can boot to recovery, but I am in limbo when I try to flash with the "TWRP evitareul". It never installs! I'm guessing I have a booting issue.
Based on various forum articles I believe I'm to get the "Boot.img" to flash when I exe the rom file? I really rather just have the "zip" version I can use with Windroid. I'll need guidance and help there.
As it stands right now I have unlocked bootloader and apparently have the wrong TWRP installed. I have issues with my phone being recognized by my computer, and at various times my computer states there is a problem with windroid (when phone connected via usb). Is using a windows 8.1 system an issue. I can go to my old XP
In summary I need:
1) Find a way to flash the correct TWRP into my HTC One x+
2)be able to flash a ROM (MagioRom).
3)Flash the boot/img.
Guidance and help is appreciated. At least point me in the right direction. This is why I posted here. Please excuse my ignorance. Thanks
Click to expand...
Click to collapse
you should continue ask your question in http://forum.xda-developers.com/htc-one-x2/help/htc-one-x-stuck-twrp-v2-8-5-0-os-t3071068
also see HOX+ Tutorial for Unlocking, Rooting & installing a custom ROM [BEGINNERS FRIENDLY ]

No reply, thread will be closed.